Why windows 8 will not let me save files whenever I want?

Similar Questions

• Dell optiplex755; will not let me save files or programs

  I recently bought a pc used dell from a local college running enterprise 7 and it wont let me save files or programs. What are my options for

  solve this problem?

  Please note that probably you will need to remove this Windows 7 license Enterprise, as it may be to use KMS activation, which is linked to your local college.

  Windows 7 Enterprise volume license customer and is only allowed to customers with a volume license agreement that deploy Windows 7 in bulk.

  Your copy of Windows 7 uses KMS licenses, which requires he reactivates the licence every 180 days (6 months) by connecting to the KMS host computer. The KMS host is usually hosted on the domain in your workplace where the license was issued. Reactivation can be done by authenticating to the field of work (log in) or VPN to your network.

  Otherwise, you can contact your COMPUTER administrator for assistance or consider getting a MAK key that works more like a sale at retail and no key requires no reactivation every 180 days.

• Acrobat 8 Pro will not let me save files

  It's just really bugging me - I work in Indesign CS5 and save the file in pdf format. I opened the pdf too check ok and e-mail to the customer. So when I change my Indesign file and re-register on this pdf, I get this message every time:

  Cannot save the file 'XXX' you may not be allowed or the file may be in use.

  And therefore, I must go into the folder and delete it until I can save. It is not in use, it is permanently closed.

  Does anyone else have this problem?

  AHA! Il0 - reason similar to Lindsay. My folder appears as "cover flow" and when the pdf file I want to record on is highlighted showing a picture preview, I can't save on. Just click on another file in the file and viola! That was me buggin for centuries!

• Windows 7 will not let me install my Kodak Digital Camera C875 camera.

  Someone can tell me why Windows 7 will not let me install my camera, worked very well in Visa, any help out there?

  Original title: Kodak Digital Camera C875

  The best way to manage old cameras that have compatibility problems is not to connect the camera to the computer, but rather to remove the memory card from the camera and use a desktop card reader to make transfers.

  If your computer lacks a built-in card reader, you can buy very cheap () USB card readers

• When I close firefox it tells me that I am closing multiple tabs. and will not let me save them. the only option is to cancel or OK.

  This has just begun. When I close firefox it tells me that I am closing multiple tabs. and will not let me save them. the only option is to cancel or OK. When I say OK and restart Firefox all my tabs go :-( This happens every time now. I know how to recover my old tabs but whenever I close Firefox it always warns me that I'm closing multiple tabs.

  Tanks for help getting Firefox working properly again
  Jim

  Do not use 'Clear history of Firefox closing' to clear the 'browsing history '.

  • Tools > Options > Privacy: history: [X] clear history of Firefox closing > settings
  • https://support.Mozilla.org/KB/clear+recent+history

  Using the "Show my windows and tabs from last time" is a more reliable way to restore the session data.

  • Tools > Options > general > startup: "When Firefox starts": "show my windows and tabs from last time '.

• Windows 7 will not search my rtf files. I went into Control Panel and rich text is selected. I also tried adding again, but he will not always look for rtf files.

  Windows 7 will not search my rtf files. I went into Control Panel and rich text is selected. I also tried adding again, but he will not always look for rtf files.

  Hello

  ·         Is that what the problem is with a specific file extension?

  ·         How long have you been faced with this problem?

  ·         You did it last changes before the show?

  Follow the steps below to solve the problem:

  Method 1:

  If you have problems of location of the files, folders, or other items on your computer, try using the search and indexing of troubleshooting to solve the problem. It ensures that the Windows Search service is running and checks if you have the correct permissions to search all the directories on your computer.

  See the article below for additional information and steps.

  Open the troubleshooter for search and indexing

  http://Windows.Microsoft.com/en-us/Windows7/open-the-search-and-indexing-Troubleshooter

  Method 2:

  Also I ask you to re - index files and then check. Follow the artticle below for the procedure.

  Change advanced indexing options

  http://Windows.Microsoft.com/en-us/Windows7/change-advanced-indexing-options

  See also:

  Improve Windows searches using the index: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/improve-Windows-searches-using-the-index-frequently-asked-questions

  Hope this information helps.

• How do I give myself PERMANENT, tirelessly administrator privileges? It's MY COMPUTER, I should be able to save files WHENEVER I WANT WHENEVER I want TO

  This is GARBAGE! Windows tells me I can't save files in a particular directory, redirect me to My Documents instead. I am then allowed to copy the file to the directory I want, but I should be able to register here first. It is absurd and tedious and DOES NOTHING. I'm tired to be attached to these inept security restrictions and I want to get a PERMANENT ADMIN who doesn't have to suffer through 1 million boxes of dialogue and workarounds to SAVE A FILE in THE DIRECTORY OF MY CHOOSING.

  I am the only user on the computer! Why? Why can't I do what I want, when I want? Should never have gone from Mac.
  Please notify. Thank you.

  Rogue programs have a bad habit of doing things behind your back. UAC in Windows 7 is designed to prevent this. It this bothers you, turn off UAC. It's your choice.

• Why Windows 7 will not allow games such as Solitaire, to be saved?

  I love playing solitaire and the games that come with Windows 7.  However, the game will not save more often. I reached $1,100 + and you exit the solitary program only to go back and start from scratch.

  Why games will not save in Windows 7?

  Hi Suzanne,.

  Thanks for posting your query in Microsoft Community.

  According to the description, it seems that you are having problems with Microsoft games such as Solitaire times record. I will definitely help you with this problem.

  To resolve this problem, I suggest to uninstall and reinstall the windows feature set and check if the problem is resolved.

  To enable or disable Windows features, follow these steps:

  1. click the Start button, select Control Panel, click programsand then click on turn Windows features on or OFF. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  2. to activate a Windows function, check the check next to the feature. To disable a feature Windows, clear the check box. Click OK.

  Certain Windows features are grouped together in folders, and some folders contain subfolders with additional features. If a box is partially checked or is dimmed, then some items in the folder are turned on and some are turned off. To view the contents of a folder, double-click it.

  For more information, visit the below mentioned link:

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-features-on-or-off

  I hope this helps. Try the above steps and get back to us for assistance. We will be happy to help you.

• Windows 8 will not let me move the AppData\Local folder to new drive

  All,

  I wanted to get my user account files from C drive which is a smaller SSD drive at most of my hard drive. I encountered several problems.

  A lot of trial and error, I was able to move each file of folder of the user account to an identical structure on my drive D (a "spinner"). Once I worked on all the kinks, everything worked without problems.

  However, I was unable to move the hidden AppData folder. I discovered there are three subfolders: roaming local and LocalLow. I was able to move LocalLow and roaming without problem. However, Local gave me problems.

  I discovered that the Local had some folders and files under it for which I have no permissions. Once I gained permissions for them, I thought I was on my way. The command to move the folder (using the Properties dialog box) has started working on the transition of 79 000 files. He moved all but 19 of them. He choked on all 12-15 files that have been opened and used by the system and the balance of the 19 had too long of a file name. So, I was disappointed.

  I then decided to create another administrator account and the sign of the current account and connect to the temporary administrator account that I had just created. I thought that I could then move the files because they would not be opened and used by the system. But, when I open the Properties dialog box, the LOCATION tab was gone, so I could not move the files.

  I need answers to two questions:

  • Why Microsoft would give the user a LOCATION tab with a NAVIGATION button, if it was impossible to move the AppData\Local folder?
  • Is there another way that a layman like me can change this setting? Can someone direct me to here? (Such as it is, 2 of the 3 AppData files are on drive D and 1 is always the SSD C drive.)

  Thank you.

  Matt

  OK, I fixed using a symbolic link. I moved my complete record of users. Here are the steps I used:

  • Create a folder on the "C" drive, called "this_is_c" and create a folder on the disk "D", called "this_is_d" - it is only for identification purposes in the later stages.
  • Boot from the Windows 8 Pro disc. (In other words, will not start hard drive.)
  • Do not choose 'Install now' - choose ' repair you computer.
  • Then choose troubleshooting
  • Choose Advanced Options
  • Then choose command line
  • The player that appears corresponds to the player 'X' - which is the recovery disk.
  • Type "C:" to switch to the 'C' drive
  • Type "Dir" and see if you see the folder "this_is_c".
  • If you do not, continue to change letters until you see this folder.
  • It worked that the 'C' drive during this "repair" was maybe the same as my 'C' drive when I boot normally.
  • Find the "D" drive through the same process - that is, try to find the folder "this_is_d".
  • It worked that the "D" drive during this "repair" was maybe the same as my "D" drive when I boot normally.
  • Type this command: xcopy/e/k/o/h/b c:\Users d:\Users see the next chip
  • First drive name must be the name of the drive as the "repair" attributed to your normal boot drive 'C '. The second disc should be burned as it would be during a normal boot. So, in my case, these conditions were the same. Note: use a capital 'U' for users instead of lowercase 'u' in users.
  • Type "D" when prompted.
  • Type the following command: rd /s c:\Users
  • Type this command: mklink /d c:\Users d:\Users
  • Type this command: exit
  • Continue to start.

  This will create a symbolic link that will redirect all actions to or from users on 'C' folder in the new folder users on "D". In regards to windows system knows, he is still sending the disk of 'C '. It is just redirected.

  This works perfectly for me. I installed apps and run programs without problem.

  It's a sort of understand. But it works for me.

  Matt

• Windows vista will not let upgrade me to windows 7

  had a new hard drive installed on my pc. recovered to the factory specifications and reinstalled PC windows7 home premium.  had worse transtering the backup data.  so I got the pc again, but this time it will not be upgraded because must be running Vista Home Basic sp1.  so I installed the service with some difficulty, but the message indicates that sp1 was intstalled successfully and vista won't upgrade.

  Perform a custom installation of Windwos 7 on Windows Vista:

  Boot from the Windows 7 DVD
  Click Install now
  Accept the license agreement
  When the option is displayed to select a type of installation, click (Custom advanced)

  Select the disk partition where you want to install Windows 7 click Next.

  You will receive the following warning:

  The partition you have selected may contain files from a previous Installation of Windows. If so, these files and folders will be moved to a folder named Windows.old. You will be able to access the information in Windows.old, but you will be able to use your previous version of Windows.

  (At all costs, do NOT click on anything in Format, deletion or Partition name.) So even do a custom installation, your personal files are still kept. Click OK

  The installation program will now begin installation. During installation, your computer will be restarted several times.

  Once the installation is complete, you can complete the Out of Box experience as the choice of your laptop, create a username, password, your time zone. You can then proceed to download the latest updates for Windows and reinstall your applications and drivers.

  You can then retrieve your personal files from the Windows.old folder and reinstall all of your applications and drivers.

  http://notebooks.com/2010/11/09/how-to-recover-documents-music-and-email-after-upgrading-with-the-Windows-old-folder/

• "Windows 7 will not let iTunes 11 Internet access."

  I am using Windows 7 32 bit on a laptop computer with ZoneAlarm free firewall/antivirus and Firefox 17.0.1 browser (do not use IE 8 and IE 9 will not even load, so crazy that).  I had no problems with iTunes, Internet access until about two or three Windows updates there, when I was still with iTunes 10.x, I thought that maybe an update to iTunes was in order, so I did and updated to iTunes 11.  That didn't connect to the internet, so I deleted, close ZoneAlarm and reinstalled iTunes.  Still no Internet access even if I have an active Internet connection.  I ran the diagnostic iTunes and found this Windows Firewall - which * he * stop when running ZoneAlarm - does not allow iTunes outgoing access, so I fixed.  Still nothing and it is with the browser able to connect to the network, so I don't know Internet access in itself is not the problem.  I have so stop and you exit ZoneAlarm. still nothing.  Verified that welcomed iTunes Windows Firewall outgoing; It does (in theory; at least she said it does), but STILL nothing!

  It's stupid, because iTunes worked fine until recently.  Is there something other past here between Windows 7 and iTunes I should know about?  Help!

  HI Maria,

  Thanks for posting your query in Microsoft Community.

  It appears from the description of the problem you are facing problems with iTunes.

  I imagine the inconvenience that you are experiencing. I will certainly help you in this matter.

  1. are you able to launch Internet Explorer?

  2. What is the exact problem you are facing with Internet Explorer?

  Please follow the steps from the link and check that it works very well.

  iTunes for Windows: network connectivity Tests

  http://support.Apple.com/kb/HT3204

  Reference links:

  iTunes for Windows: can not access the Internet if the proxy settings are incorrect

  http://support.Apple.com/kb/TS1490

  Unable to connect to the iTunes Store

  http://support.Apple.com/kb/TS1368

  Hope it will be useful. If you still have questions, please reply and we will be happy to help you.

• Why Cloud Creative will not let me install Lightroom CC 2015

  Why Cloud Creative will let me install Lightroom CC 2015?

  What do you mean by "won't you?"

  You are using a 64-bit operating system?

  Have your purchased or subscribed to a package?

  Do you get any error messages?

• Windows Vista will not let me delete a file.

  Attempt to remove the old program files.

  Windows says I need permission to delete files.

  There is only one user and a profile on this computer.  This profile is the sole Director.

  The dialog box does not offer the possibility to grant permission for the removal.  Said only that I need of approval.

  Do this first.

  How to take possession of an item in Vista and Windows 7
  http://www.Vistax64.com/tutorials/67717-take-ownership-file.html

  Then try file Assassin, or this tool.

  Unlocker File Remover

  Download it from FileHippo
  http://filehippo.com/download_unlocker/

  Download from CNET
  http://download.CNET.com/WOT/3000-2378_4-75011499.html

  Work in safe mode may help as well.

• Windows 7 will not allow a batch file to run.

  I created a batch file.  Double-clicking it in Explorer lights up only the Publisher.  It runs in a command window does the editor.  That is what it is?

  Should it run in Compatibility Mode for Windows XP (SP3) maybe? Right click, select Properties , and then make the changes in the compatibility tab.

  You didn't mention what your batch file has been written to do, but it must run an command with administrator privileges prompt?

  To start an elevated command prompt, click Start and type CMD but do not press ENTER. Find the program listed above CMD and right click and select run as administrator.

  If this does not work the script file, you will need to click right on the. BAT or. CMD and select Properties. Under the tab compatibility , under privilege level, check the run as Administrator option. This should be performed by the users of the human resources of the computer, click on change settings for all users and make your changes as well.

  • If this proposal of solution solves your problem, please go back and mark as answer for others to consider.

• System won't let me save files where I want. It says Contact admiistrator. There is none. It's just me. How can I say this stupid OS I AM the administrator, so I can save things where I want to save them to?

  I want to be the administrator

  You forgot to tell us where you try to save files. You may be trying to save them in directories protected like the root of %systemdrive%\lopr.txt, Program Files or Windows. After you protect the directories is common with many modern exploitation, not only Windows Vista and Windows 7 systems. It's a good thing if you think that whether or not.

  What is not not the administrator, even if you are running in an administrator account (no best practices - see below), you still need to raise the privilege when overall changes to the operating system.

  If you try to save files in your user directory and failing, please let us know. Otherwise the OS works as expected. If you find it too shocking, then you can always switch to another operating system. However, be aware that you will find the same 'limitations' in Linux and OS X. And nobody knows what he/she does would run as root under Linux.

  You don't have your system set up optimal about users. You absolutely don't want to have only one user account. As XP and all the other modern operating systems, Vista and Windows 7 are OS multi-user with system built-in accounts such as administrator, by default, all users and guest. These accounts should be left alone because they are part of the structure of the operating system.

  In particular, you do not want account only one user with administrator privileges on Vista and Windows 7 because the administrator account integrated (normally only used in emergencies) is disabled by default. If you use as an administrator for your daily work, and this account is corrupt, things will be difficult. It is not impossible to activate the built-in administrator to rescue things, but it will take third-party tools and work outside the operating system.

  The user account that is for your daily work must be a Standard user, with the extra administrative user (call it something like 'CompAdmin' or 'Tech' or similar) only it for elevation purposes. As a user Standard is recommended for security reasons and will help protect your computer against infections. After you have created "CompAdmin", connect to it and change your normal user account Standard. Then log on to your regular account.

  If you want to go directly to the desktop and ignore the Welcome screen with the icons of the user accounts, you can do this:

  Start Orb > Search box > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null).

  MS - MVP - Elephant Boy computers - don't panic!