Why windows update only after I turn off pc?

Similar Questions

• Why windows constantly error reports and turn off

  Why windows constantly error reports and turn off. It is THE most reliable service.

  * original title - sucks of windows *.

  Hello williamiscome,

  This error message do you receive?

  The computer shuts down or restarts it?

  Let know us and we will continue to help you.

  Best regards

  Matthew_Ha

• Windows Update causes glass/aero turns off. How to restore?

  I am currently running windows 7 Professional, and today an automatic update of windows has been installed on shutdown.  After reboot, I lost the aero glass look and it is replaced instead of greyish blue bars.  Using the system restore I can go back to glass, but as soon as the update installs again once he goes.  In any case to return the glass?

  Hello

  Do your restore and then after reboot immediately do the following:

  Configuration-Windows Updates - settings - updated Panel assigned to download but not install so that you can select
  for install or click right on and HIDE as needed. Don't forget if you restore to before these values are set
  Next, you need to put it back again. If you are sure that the question is clear, you can assign their automatic return.

  You can also update video (display driver) with this method and updated 1 AUTO driver
  immediately after the above (why and how are below) even if you only do not put in manually day
  the pilot.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
  each driver in the list, additional useful information is displayed: load address of the driver, description,.
  version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Always check in the Device Manager - tab drivers version you install actually shows up. This
  because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
  pilot - reboot - check that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• Windows Update restart computer - cannot turn off

  even since a recent update (2-3 weeks ago?) my computer would restart on its own investigation, I discovered this automatic update seemed to cause reboot... I turned to THE and it seemed ok for a few days, but he's back... this happens about twice a day... Here's the log to THE most recent, to reset...

  2010-05-24 21:57:08:015 808 ff4 Misc = logging initialized (build: 7.4.7600.226, tz:-0500) =.
  2010-05-24 21:57:08:046 808 ff4 Misc = process: C:\WINDOWS\System32\svchost.exe
  2010-05-24 21:57:08:046 808 ff4 Misc = Module: C:\WINDOWS\system32\wuaueng.dll
  2010-05-24 21:57:07:968 808 ff4 Service *.
  2010-05-24 21:57:08:046 808 ff4 Service * START * Service: Service startup
  2010-05-24 21:57:08:046 808 ff4 Service *.
  2010-05-24 21:57:10:890 808 ff4 Agent * WU version 7.4.7600.226 customer
  2010-05-24 21:57:10:890 808 ff4 Agent * Base Directory: C:\WINDOWS\SoftwareDistribution
  2010-05-24 21:57:10:968 808 ff4 Agent * access type: no proxy
  2010-05-24 21:57:11:031 808 ff4 Agent * network state: connected
  2010-05-24 21:58:06:156 808 ff4 Agent * Agent: initialization of Windows Update Agent *.
  2010-05-24 21:58:06:203 808 ff4 Agent * Agent: initialization of the global parameters cache *.
  2010-05-24 21:58:06:203 808 ff4 Agent * WSUS server:
  2010-05-24 21:58:06:203 808 ff4 Agent * state WSUS server:
  2010-05-24 21:58:06:203 808 ff4 Agent * target group: (Unassigned Computers)
  2010-05-24 21:58:06:203 808 ff4 Agent * Windows Update access disabled: No.
  2010-05-24 21:58:06:343 808 ff4 DnldMgr Download manager restoring 0 downloads
  2010-05-24 21:58:24:593 808 ff4 to THE # to THE: initialization of automatic updates.
  2010-05-24 21:58:24:609 808 ff4 to THE setting according to sqm report timeout at 2010-05-25 02:58:24
  2010-05-24 21:58:24:640 808 ff4 to THE # to THE disabled through the user preference
  2010-05-24 21:58:24:687 808 ff4 to THE initialization feature updates
  2010-05-24 21:58:24:750 808 ff4 to THE Found set 0 cached updates featured
  2010-05-24 21:58:24:750 808 ff4 to THE delayed finish to initialize
  2010-05-24 21:58:27:703 808 ff4 report * report: initialization of static data to report *.
  2010-05-24 21:58:27:703 808 ff4 report * OS Version = 5.1.2600.3.0.66304
  2010-05-24 21:58:28:296 808 ff4 report * computer brand = INTEL_
  2010-05-24 21:58:28:296 808 ff4 report * computer model = D945PVS_
  2010-05-24 21:58:28:296 808 ff4 report * Bios revision = SN94510J.86A.0065.2006.0116.1603
  2010-05-24 21:58:28:296 808 ff4 report * the Bios name = default system BIOS
  2010-05-24 21:58:28:296 808 ff4 report * the Bios Release Date = 2006-01 - 16 T 00: 00:00
  2010-05-24 21:58:28:296 808 ff4 report * locale 1033 = ID

  No update won't download/install on your computer from WinXP SP3 until you have re-enabled the automatic updates; CF.http://support.microsoft.com/kb/306525

  That being said, if THE is disabled (and your newspaper says it's), to THE is not causing restarts it.

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  A (another) Norton or McAfee application has already been installed on the computer (for example, a free trial version which is preinstalled when you bought it)?

  Open Internet Explorer on this page & run the difficulty: http://support.microsoft.com/kb/980966 what do you get?

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Problem with Internet connection - connect only after you turn off allowing then again.

  It is a recent problem that unfortunately I have very little information on. In other words, after months be happy and connection to the internet when you start the computer has decided he won't d more, instead he wants to deactivate and then activate the connection to the local network before it will connect.

  There is no error message and the convenience store could not find that something wrong then directed me here! I tried to diagnose too but didn't know what was wrong either. There are two computers connected through a router and the other is fine, ISP technical support assures me it's nothing to do with them either.

  It left me speechless. I tried the system restore, I crossed the two diagnoses available in internet options and I called ISP support. Although this isn't a direct threatening problem, it's one of those little niggles you want just leave.

  If anyone has any ideas on how to fix things, I'd be grateful.

  * Acer Revo running Win 7.

  Hi tmaxwell83,

  1. did you of recent changes on the computer?

  2. do you have security software installed on the computer?

  3. What is the type of internet connection you use?

  This would happen if the NIC driver is corrupt or needs to be updated.

  I suggest that you install the updated drivers for the network adapter on the computer by visiting the network card or the computer manufacturer Web site, the check if it works fine.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Network adapter problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Configure Windows Update 51% do not turn off your computer.

  I have windows 7 Home premium, and it is running 64-bit. I recently downloaded 12 updates for my computer at night, but when I started my computer this morning, he's stuck at 51%. It has not changed for about 2 hours and go. I would like to get help on fixing this issue, whatever they may be.

  Too bad, he finally passed 51%. It took just a few hours.

• IPad 2 Air after update to iOS10 wifi turns off automatically.

  IPad 2 Air after update to iOS10 wifi turns off automatically.

  Hello. Could you please identify your router? Also try to describe a little more when it stops, and you can reconnect after that.

• Problem of multiple windows. Windows update 0% complete, "ready to set up Windows. "Please do not turn off your computer", etc.

  Hi all, I have recently experienced some of the problems reported here: - Windows update doesn't work (stuck at 0% for the hours) - Windows cannot stop ("preparing to set up Windows. Please don't turn off your computer") - MSE is out of date - I can't unzip files - some programs no longer work - I just can't stop some services (like Windows update). It times out. etc... I have Win7 X 64, and the last update that has worked with success has been about 3 weeks ago. Thanks for your help!

  Very well.

  Given that the 'MemTest... returned some mistakes,' contact the manufacturer for support under your warranty or Service contract. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• GetAxisScalingMode is updated only after the graphic update

  Hello

  on a xy chart, I'm traced multiple xy plots and a few vertical lines (2 or 4) to indicate some areas of interest. For the development of these lines, I need to know the value of y minimum and maximum of the graph. That's why I thought using GetAxisScalingMode (autoscaling value), which returns the maximum value without the need to investigate individual data sets (large) of the xy plots ideally.

  In principle, this approach works.

  Now, to avoid flicker, I use the following sequence:

  (1) SetCtrlAttribute (Panel, graph_control, ATTR_REFRESH_GRAPH, FALSE);

  (2) plot new xy plots

  (3) obtain ymin, ymax, using GetAxisScalingMode

  (4) vertical lines using plot plot

  (5) SetCtrlAttribute (Panel, graph_control, ATTR_REFRESH_GRAPH, TRUE);

  Unfortunately, this does not work because the range of a chart axis is updated only after the display of the chart.

  First of all, this behavior seems a bit inconsistent for me because using for example. GetCtrlAttribute (Panel, graph_control, ATTR_NUM_PLOTS, & plot_handles) returns the correct number of plots before updating the chart.

  Second, you need a suggestion of how to achieve the goal of flicker free plot xy plots so many vertical lines, covering the range complete y?

  Thank you!!

  Wolfgang

  OK... Finally!

  Now, I can confirm that this behavior is weird (I would even call it a bug...)

  Here is a workaround:

  The fundamental discovery is that the axis interval is updated if a plot is set, even if the chart is not updated. The procedure is:

  (1) SetCtrlAttribute (Panel, graph_control, ATTR_REFRESH_GRAPH, FALSE);

  (2) plot new xy plots

  3) get ymin, ymax, using GetAxisScalingMode / / doesn't work here because of the CVI BUG

  (4) vertical lines using plot plot

  4A) GetCtrlAttribute (Panel, graph_control, ATTR_NUM_PLOTS, & plot_handles);

  4 (b) SetCtrlAttribute (Panel, graph_control, ATTR_PLOT_ZPLANE_POSITION, plot_handles - 1); These two lines are stupid here because the lines are subsequently demolished, but they update the chart axis range!

  4 c) get ymin, ymax, using GetAxisScalingMode / / now it works

  d 4) remove vertical lines

  4th) vertical plots using plot / / and now the lines have the right length

  (5) SetCtrlAttribute (Panel, graph_control, ATTR_REFRESH_GRAPH, TRUE);

  Wolfgang

• I have a DELL Inspiron 6400 running Windows Vista. The backlight turns off.

  I have a DELL Inspiron 6400 running Windows Vista. The backlight turns off when the charger is plugged after about 10 to 15 minutes. If I shine a torch on the screen, I see about the display is always. If I select change user from the menu start or stop / restart the machine, the backlight turns on and will last for another 10 to 15 minutes. I tried in safe mode and the same thing happens. Can someone help me with this problem?

  It could be the inverter Board or the backlight itself on the way to the outside. Whatever it is, it is definitely a hardware problem and it will take a good repairman to fix. You can contact Dell and see what they would charge to fix this, just to see if it would be more cost-effective to buy a new laptop or have it repaired. Because it is 5 years since it is manufacturing, you can be better to save your pennies for a new :-(

  SC Tom

• Windows error message family Assistant "there was a problem that caused some parts of Windows family Assistant must be turned off."

  Hello

  I received an error message after logging in to my computer saying: "there was a problem that caused some parts of Windows family Assistant must be turned off." Not maybe not able to connect to a Windows Live in some programs. The problem may be due to a recent program that was installed. I don't know what caused this message. Any advice on what to do are greatly appreciated.

  Thank you

  Jennifer

  Hi Jennifer,.

  You might face this problem on the Windows live service runs before Windows loads. This creates a conflict so you get this error. I suggest you follow the steps indicated by ¡Firedog as dated

  June 16, 2014.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-ECOMS/Windows-Live-ID-sign-in-Assistant/f84d1a67-858e-4DC0-AD10-f06bf41f0b5d

  If you follow always the same question, you can follow the steps in the link below.

  http://answers.Microsoft.com/en-us/windowslive/Forum/LIVEmail-wlinstall/Windows-Live-ID-sign-in-Assistant-to-be-disabled/49a8ad70-f645-4e73-BAAA-d4485dddb354

  Let us know if you need additional assistance.

• Whenever I restart Windows 7, I have to turn off and then turn on my network connection get Windows 7 to recognize my wired Internet connection. What is going on?

  I installed Windows 7 Pro on a system newly built using a motherboard Gigabyte Z77x-UD5H, Intel I7 - 3770 K CPU and 32 GB DRAM3, on a SSD OCZ Vertex 3. Everything went well. It is now about three days, since I installed the operating system. I've been adding on software and other general photo editing programs. The Internet would still work. NOW all of a sudden I lost my Internet connection.  Whenever I restart Windows 7, I have to turn off and then turn on my network connection get Windows 7 to recognize my wired Internet connection. What is going on?

  Hello is a network installed by Apple, iTunes more often software Protocol.  If you do not use iTunes * (or other Apple related programs streaming) you don't need.  If you do not use iTunes check if there are any available software updates.

• Cannot get on my computer after you turn off FileVault

  I can't get on my computer after you turn off FileVault. After reboot, he asked my name and my password. It didn't work and now I'm stuck at the connection. What should I do? The computer is new and I had nothing recorded on it.

  Reboot into recovery (command-R) Mode. Then use disk utility to ERASE the drive. Select the top reader of the page entry and select Delete. This will erase, reformat, and create a single partition. Close disk utility, then select reinstall OS X OS X Utilities menu.

• Why Windows Update repeatedly offers the same update?

  Original title: duplicate updates

  Why Windows Update tells me to download "new" updates, when they were listed as installed successfully 2 days ago?

  Hello

  I suggest you to follow the steps in troubleshooting this article and check if it helps.

  Windows Update or Microsoft Update repeatedly offers the same update

  http://support.Microsoft.com/kb/910339

  See also: the problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

• Windows Defender and the malicious software removal tool not doing anything to protect against malware, why Windows Update keep harassing upgrade us on a regular basis?

  original title: WHY Windows Update keep up to date USELESS of Windows Defender and installation USELESS malware remover?

  I'm a computer technician who makes a TON of virus remove money from Windows computers.  Two-thirds of my tasks of repair involving the elimination of viruses from Windows and trying to fix the Internet Explorer, the worst browser known to humanity.

  I have a question about Windows Defender and the malicious software removal tool.  These are two programs entirely worthless, evidenced by the fact that computers with them installed still get infected of all viruses, Trojan and rootkit out there.  Clearly, if these two programs of malware Microsoft has done anything to protect your computer, it would have been without having to release still a THIRD tool antivirus, "security essentials" for Microsoft.   I'm not complaining — the way Microsoft Windows absorbs malware like a sponge, put a lot of money in my bank account. Please keep doing what you're doing... however...

  My question is, given that Windows Defender and the malicious software removal tool doing nothing to protect against malware, why Windows Update keep harassing upgrade us on a regular basis?

  Windows defender is not an antivirus program, it is designed to protect against spyware.

  If you don't like them, so do not use them.

  http://support.Microsoft.com/kb/890830