Why won't my installer in real-time?

Similar Questions

• THUMBNAILS VIDEO DISAPPEARED AFTER THE INSTALLATION OF REAL TIME

  After you have installed the latest version of "Real Time Player" which is an upgrade to 'Real Player of cloud', all the video thumbnails are not visible on a single computer. 'Real time' has been installed on two computers with almost identical Windows 7 Home Premium and processors within minutes of each other.  A computer kept all video thumbnails while the other did not. So far I have uninstalled and reinstalled in real time, uninstalled and reinstalled Real Cloud, but still no thumbnail previews. I also tried the verification of the method 'display only the photos '.  I'm looking for someone who's hands are successful on empirical knowledge for this question. Thank you.

  Stanley,

  Here's a recent update on my original investigation.

  After an upgrade of RealTimes Player RealPlayer Cloud download failed to produce thousands of miniature video generated by RealPlayer cloud, I immediately started looking for answers in this forum of Microsoft.

  I have two new computers HP here on my desk. A computer has received the RealTimes Player download and continued to display thumbnails. This is the second HP computer that the thumbnails are not visible.

  Several answers to this problem repeated the same methods. I tried these methods more than once and still no pictures. Then I took action on your message and another someone from Real.com contact Real.com. The only way to contact Real.com was by email on their website. I sent them an email describing the problem. Now, it's my experience that Real.com has even good tech support for free download of RealPlayer. Their first suggestions were identical to the information I received Microsoft community. Following is a concise list of end to end on how I solved the problem before Real.com phoned for help, which may have included access remotely:

  (1) download the RealTimes Player "new" (that's their latest version of RealPlayer cloud;) I know now I should have stayed with cloud of RealPlayer).

  (2) a computer downloaded without any problems, while the second computer lost all thumbnails.

  (3) I contact Microsoft Community to get answers.

  (4) community Microsoft sends answers, including and meet someone from Real.com.

  (5) none of the above gives a solution.

  (6) I am Real.com e-mail for a few days through their website with no solutions.

  (7) I have uninstall RealTimes Player on both computers.

  (7) I call the HP Technical Support to make a 'system restore' on computers.

  (8) after the "System Restore", I reinstall MSE, and all thumbnails are restored on the computer and three external hard drives. All thumbnails are Windows Media files. None of the hundreds of RealPlayer Cloud files can be opened.

  (9) Real.com offers to call me at one time that I choose, which may include remote access to my computer.

  (10) I answer Real.com Friday that a time to call will be the following Monday.

  (11) the following Monday at the appointed hour, Real.com has not called. I waited 30-40 minutes. While I was waiting, I've been on the Real.com site read comments in the section "RealPlayer/RealPlayerCloud. In a response from Real.com Tech to one of the speakers, they gave to this speaker a link to download RealPlayer Cloud. I took a chance with this link and downloaded RealPlayer Cloud in my computer, not only did the Windows Media thumbnails remain, but I was able to play all audio Real Player and video files, and the "Download this video" button a drop down of RealPlayer has been restored. I turned so my attention on the other computer, clicked on a download link that says Cloud RealPlayer on Real.com Web site, and when the download is complete, it was the new RealTimes Player again, not RealPlayer Cloud. But, all right. All thumbnails are back in this computer while being able to play all Real Player files. Now, a computer has the 'new' RealTimes Player and the other has the original cloud of RealPlayer.

  (12) after all this was over, and two computers were back to normal, the representative of Real.com called (almost two hours late; he was on another call that lasted longer than normal). I explained that while you wait for him to call, I reinstalled Real Player on both computers and everything was back to normal. I mentioned reinstalling RealPlayer cloud on the other computer and it recommended that all was well under way, for whatever. I agree with you.

  (13) since the call of the representative, Real.com has sent me a couple of times and told me they were happy that the problem has been resolved and do not hesitate to contact them for any future problems. I asked for a download link for RealPlayer cloud which they sent a warning that they were not certain if the link has an expiration date, but to contact them for any problems or questions.

  (14) although I have Google Chrome on a single computer, all my audio/video download through RealPlayer Cloud/RealTimes drive is via Internet Explorer, not Google Chrome. I prefer the drop-down menu "Download this video" button at the edge of the screen in Internet Archive rather than the barely visible button at the top to the center of the page in Google Chrome.

  Microsoft 15 community) thanks and Real.com.

  (16) a lesson learned. When everything works fine, why switch?

      

   

• installation and real-time help

  
  
  

• WebCenter real-time Collaboration

  Hello world
  
  I'm interesting on this topic. Is any documentation regarding installation, 'WebCenter real-time Collaboration' configuration and integration with Oracle webcenter.
  
  Greeting
  Andres
  
  Edited by: user10387663 January 6, 2011 13:05

  For the moment, it's OK. Even when you don't plan to use RTC, you always rely on other services of the hive. For example, a future conference planning requires time management Service. There are a few things we can do to simplify things in the future, but those who are more long term.

  Hope that helps,

  -Marc

• Why is-Web application server on a target at a distance in real time is not start?

  Hi, I need help urgent please

  I was wondering why the Web application server on a target at a distance in real time is not start?

  The target is 9014 real-time and its connected to a local network abroad, I have a public IP address port forwarded to the local IP address of the device (Network Address Translation) with all open TCP/UDP ports. I can log on remotely over the internet using the public IP address to the device configuration page and change many settings. Whenever I have activate the Server Web applications and made port 8080, worth defaults to 0 after the reboot of the target.

  The admin login I use has all permissions to control the unit.

  For this reason, I have a problem, deploy web services remotely through the project after building it as it happens with the following error.

  "Web Services deployment failed. You must start the application Web server OR before you deploy a web service.

   

  I have attached a few screenshots

   

  Thanks for the help

  I had someone to plug his laptop to the same network as the cRIO, logmein used to connect remotely to the laptop, I had to download labview and the software needed for the cRIO in the computer, and then with the help of MAX, I reinstalled the software on the cRIO. The port of the web server application 8080 is now activated and I was able to deploy services web ok.

  I wonder why I can't use MAX distance to reinstall the software on the cRIO.

  The cRIO is installed on a private overseas network (192.x.x.x), then I have a public internet IP address (67.x.x.x) mapped to the private IP address of the cRIO (Network Address Translation). I can connect to the cRIO config page using the address 67.x.x.x, but not via MAX

  If I find target real tiem using the Ip address of 67.x.x.x, sometimes with the private static IP (192.x.x.x) located on the cRIO but it shows disconnected status

  I wonder if someone has an idea how to go about using MAX to reach the target in real time on the internet

  Thank you

• Is there a phone # I can call to get real help? I never had trouble answering ads on Craigslist so far. Why won't he answer me?

  Is there a phone # I can call to get real help? I never had trouble answering ads on Craigslist so far. Why won't he answer me?

  It should be easier than that to send and receive e-mails via craigslist.

  Hello

  1. did you of recent changes to the system?

  2. what happens when you try to add?

  3. do you get an error message?

  4. what Web browser do you use?

  Please provide more information on the issue to get help.

  Also, I suggest to see the link below and contact the Support of Craigslist for help.

  http://stlouis.craigslist.org/

  https://forums.craigslist.org/?forumid=9

  http://www.craigslist.org/about/Help/FAQ

• Real-time Application Installer

  I built two requests in real time; one for a PXI Chassi and the other for a compact field point. I wish I could send the customer updated versions of applications in real time and ask them to install them to the respective chassi/fieldpoint in the field. The customer is not the development environment. I looked around MAX, but could not find a way to do this.

  Any ideas?

  Thank you

  Kevan-

  HI Kevan.  Take a look at replication system tools.  According to me, it appeared in 8.0 or more.

  We used the tools NOR as basis of our own tools of level end-user to exactly what you are

  describe (in addition to the upgrade of the OS, if necessary).

  Matt

• Why - what is say fps not in real time?

  Whenever I have try to put images in sequels it is delayed and sometimes stops and it is said in the upper right fps not real-time

  Are you new to AE? You're doing a ram preview? After Effects uses a completely different method of reading a NLE or a media player. Sometimes it takes a while for your system.

  We don't know any specificity unless you give us details about your project, your system and your version of AE to the last comma. More often, people try to preview segments of length of a model of EI at full resolution (resolution should never be higher than the zoom factor). I have mine set to Auto in the window of the model and usually have 50% zoom factor. You're probably a little more taxing your system.

• Get strange errors 'real time' in the browser console, what do mean?

  I noticed recently that since yesterday is the day prior to that, I get a strange 'real-time' error messages in my browser console log. I get them for more or less the same sites, and I have attached a screenshot of some of the most common mistakes for example. I see these errors very frequently in the browser console log.

  So I'm a little worried about what mean these errors, why I want to come and if anything, what to do about them.

  Hello

  Try Firefox Safe mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that temporarily disables hardware acceleration, restores some settings and disables add-ons (extensions and themes).

  If Firefox is open, you can restart Firefox Safe mode in the Help menu:

  • Click the menu button

    

    click Help

    

    then select restart with disabled modules.

  If Firefox does not work, you can start Firefox in Mode safe as follows:

  • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac: Hold the option key during the startup of Firefox.
  • On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
    (you may need to specify the installation path of Firefox for example/usr/lib/firefox)

  When the Firefox Safe Mode window appears, select "start mode safe."

  

  If the problem is not present in Firefox Safe Mode, your problem is probably caused by an extension, theme or hardware acceleration. Please follow the steps described in the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. This might help others with the same problem.

• Control of data using multiple thermocouples via indicators and the waveform in real-time

  I apologize in advance for this question is probably a bit simple but I'm all new to labview and the forum and could use some advice. I have a CompaqDAQ with two 9213 16 modules of track and I'm trying to read in 30 thermocouples in a waveform, but also display 30 indicators so I can mark each indicator with the thermocouple for real-time tracking. Each thermocouple corresponds to a specific location and it is essential that the interface has an accurate indication or a label for each of them. I wonder if there is an easy way to do this in addition to split the signal and have 30 thermometers on my diagram? Perhaps a table any? If I use a table to create 30 thermometers, the DAQ assistant automatically sorts the thermocouples according to ascending numerical order. For example, would be the indicators of first and second on my interface automatically assigned to channels a0 and a1 of the first module, or should I do it manually? Even for the waveform?  Thank you very much!

  PS - Do not know if this message had need of more details, but let me know if more information is needed, and I'll give you!

  I see that you use the DAQ Assistant to create your task.  Now I understand why you may have about labelling.  It is easy of the seller NOR spiel booting...  But in any case, you already have a task to the MAX instead of use the DAQ Assistant?  The interface is similar and there may be a step or two, but your end application will be more effective and you will have more options with your data and properties.  For example, I tried to update the names of physical channel in the DAQ Assistant installation program, that it let you do, but it propagates that change forward to waveform chart legend.  Also, I don't know any property for this dynamic data type node, although I never use it either.  I suggest the setting up of your task and channels, Max if you'd give it a go.

  Since I thought I didn't really takes you all the way with you help, I wrote another one.  It uses a cluster, even if it's a bit barbaric.  I thought that there was a more eloquent way to do by changing labels, but I could not it works as I had expected.

• can't see changes to the photo in real time during editing

  Hello

  When I edit photo it won't let me see the changes in real time, unless I turn down hardware acceleration. I tried the update of windows and even downloaded the drivers two charts, but no solution. I read may be due to software mcafee, but I do not use mcafee...

  Thank you.

  Hello

  When I edit photo it won't let me see the changes in real time, unless I turn down hardware acceleration. I tried the update of windows and even downloaded the drivers two charts, but no solution. I read may be due to software mcafee, but I do not use mcafee...

  Thank you.

  ==================================
  If reducing the graphics hardware acceleration
  improves the issue... it's a strong indication that
  you have a problem with your video driver.

  Might be interesting to try to find the support Web site
  Mfg. of your video card for a Win update
  XP compatible video driver. Or... If your computer
  is a laptop... look for the support site for your computer
  Reference of the manufacturer.

  If you do not know the make and model of your
  Video adapter, see the documentation that
  supplied with the computer.

  Also you can find info on your video by driver
  go to Device Manager: you can launch
  By clicking Device Manager on... Start/run and
  type or copy / paste:
  devmgmt.msc
  And then press ENTER.

  Expand "Graphics cards" and right click
  the name of your graphics... then
  choose... Properties / tab pilot... FYI.

  You should find the make and model of your
  adapter display as well as the version of the driver.

  If the driver on the Web site is no longer
  current than you run...
  Download and install it. In addition, installation
  instructions that should be followed closely
  should be available on the support site.

  Once installed the new video driver... you
  can restore your full acceleration.

  Aslde the... If your editing functions have been
  working properly and suddenly changed... I am
  wondering if one of your Windows updates...
  updated your video driver.  Sometimes the new
  driver is not as functional as the one you have already
  a.

  System restore would have been an easy way
  to correct this, but maybe you could go to the device
  Manager and rolling toward the video driver earlier.

  (FWIW... it would be a good idea to create a system)
  Restore point before making the change)

  You can launch the Device Manager by going
  TO... Start/run and type or copy / paste
  devmgmt.msc
  And then press ENTER.

  * Proceed at your own risk *.

  Expand: Graphics cards
  Right-click on the name of the video card and
  in the menu choose... Properties / driver tab.
  Roll the button return to the version...

  (306546) HOW to: use the driver to restore roll back feature
  a previous Version of a device in Windows XP driver
  http://support.Microsoft.com/default.aspx?scid=kb;en-us;306546

  Windows XP - Vista - 7 - restore video drivers.
  Removal instructions
  http://www.nvidia.com/object/driver_rollback.html

  How to roll back a faulty device driver
  for a Version prior to Windows XP, Vista and 7
  http://www.techsupportalert.com/content/how-roll-back-misbehaving-device-driver-previous-version-Windows-XP-Vista-and-7.htm

  Good luck...

• Real-time scanning and firewall disabled

  Every time I turn off my pc, the sacnning in real-time and the firewall are disable... and it happed after I purchsed online McFee, I used to have Panda Antivirus for Netbooks and used to work in perfect!

  I will never againg buy McAfee products, I told my two sister not to buy any product from McAfee for their pc... and I have already said that most of my friends not to buy no matter what McAfee Antivirus...

  .. .it really sucks...

  I recommend that you uninstall McAfee using the special removal tool: http://www.softpedia.com/get/Tweak/Uninstallers/McAfee-Consumer-Product-Removal-Tool.shtml (not just uninstall because it works well and you will have problems with the system itself, as well as with the installation of other products).  If you just bought it, it may still be in some kind of trial period and you may be able to get a refund if you have already paid for it (you should check with them on that).  Explain your problems, if necessary, and that you intend to report on blogs and everywhere you can and they may decide to make an exception if at first, they refuse to allow the return.

  Once done, reboot and you should now be able to re - activate the Windows Firewall. http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off Check to ensure that the parameters are still accurate that McAfee could change their.  If this isn't the case, after return and we will try to understand how they disabled so we can reactivate if the normal process does not work.

  Then, you need something to replace McAfee for AV / AM fine.  I recommend Microsoft Security Essentials for free at:http://www.softpedia.com/progDownload/Microsoft-Security-Essentials-Download-131683.html for analysis in real time on the daily basis and periodic analyses of rapid or complete.  I also suggest the free Malwarebytes to:http://www.malwarebytes.org/mbam.php don't not running constantly, but in order to update and do a full scan every few weeks or just to catch whatever it is, MSE could miss.  These two products are much better than McAfee and don't cause you problems that you had to deal with.  Here's what I use and I had no problem (and no infections that were not intercepted and completely removed by one or the other).  Either way, I used myself the Panda for several years before moving to the MSE and I have nothing bad to say about them - their product is very good - but why pay for something when there are free alternatives that are almost everything as good (maybe even better)?

  I hope this helps.

  Good luck.

  P.S. Be grateful it is McAfee and Norton not - so you could be even greater problems.

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Satellite Pro M30 - real time clock shows wrong time

  Hello!

  most of the time I am using my Toshiba satellite pro m30 without the battery with the energy of the power system. the battery is stored somewhere outside of the computer for a month the real time clock shows a bad time if the computer is started after a period of time.

  I think my cmos battery is going to die soon.

  someone has an idea, how this cmos battery can be changed by myself?

  Thank you
  Reinhard

  Hello Reinhard

  I agree with you. It is time to replace the CMOS battery. It is not easy and the machine must be dismantled. If you are not familiar with the procedure for disassembly, it can be dangerous. A small mistake can result with damaging material.

  If you want to do it alone, you do so at your own risk. Be sure to use the right battery. Maybe you won't believe, but if you use a battery hurt it could cause battery explosion, or other damage.

  I'm not 100% sure, but the RTC battery must be placed on the left side near the touch pad. If you want to only please be very gently. The laptop parts are very sensitive.

• Debugging on a real-time target - deployment issues

  Dear community,

  After RT my 9651 sbRIO module wiring code, I do tests to check the intended functionality. For this I start my main VI who deploys the code on my SoM and I can happily move forward with my debugging session.

  Sometimes, however, while in the process of deployment, I get an error saying:

  [VI - name] .vi loaded with errors on the target and was closed

  When I open the VI it has no errors and the VI should work a fine might think.

  My solution was so far of the VI, just open move the wires and terminals round, re - save the VI and this is the deployment works.

  This trick worked for a while, because deployment error ca occur arbitrarily on different VI making debugging quite cumbersome.

  I then went ahead and just run the wrong VI in RT mode by moving terminals and structures around to get the VI runs in mode debugging, but it is very time consuming.

  Given that 3 people working on this project and we use git-subversioning I also do not want to "touch" each time just screws for the debugging session will without actually modifying the feature.

  Has anyone encountered a similar experience or perhaps found a magical setting to avoid this subject a lot of time?

  Hello

  If solutions already present Spex does not do the trick for you, clearing the cache of the compiled object can help.

  For more information, take a look at the following link:

  Why my screws are loaded with errors when it is deployed at my target in real time? -National Instruments
  http://digital.NI.com/public.nsf/allkb/7F6502FF0560FA9086257EB3005B13BA

  Concerning

  Alex

• Real-time execution trace toolkit to optimize the Labwindows/CVI code

  Hello

  I am trying to optimize a code in real-time in LabWindows/CVI by minimizing the time of each section of the code is taking and find bottlenecks in the code. I check this time using the real-time execution trace toolkit.

  However, I just found it seems to be a constant error when you use the tool of real-time execution trace.

  When I put the traceviewer 'start' and 'stop' right after the other, I get around shift schedule 9us. It seems that the CPU will in some "idle" after the start of the trace mode, or maybe it's the time of communication or something.

  I'd appreciate it if someone could give me an idea of why this is happening. The time of real-time application window is very limited and I'm trying to minimize the time as much as possible. Even the United States 9 error is difficult to resell.

  I used the following code:

  TraceConfigure (1, 1, 0, 25000, NULL);
  
  TraceStart ();
  
  TraceStopAndSend (HOST_ADDRESS);

  and there is a photo in the toolkit of real-time execution trace.

  Thank you.

  Generally, you might be better off picking off the clock at the beginning and end of what you want to track. RTETT my introduce overhead that becomes difficult to quantify... Which is what you probably already see. The debug mode will also implement a ton of overhead. Then... Destemming of the clock in release mode will probably give you you the best estimate.