Why - what is say fps not in real time?

Similar Questions

• "fps not in real time.

  I really need help.  Why keeps "fps not real-time" that appears when I am editing?  The video becomes so slow his frustration.  How can it ensure that it is always in "real time? Thanks a lot for your help.

  You can not. AE is compositing software, not a suite of editing. Please read the help: Previews

  Mylenium

• Why do its says could not contact a reliable source?

  Why do its says could not contact a reliable source?

  What is your operating system?

  What you're trying to download?

• You know what they say "is not a question of if, but when.

  You know what they say "is not a question of if, but when.  I had a redundant backup system for my files for several years now.  I have a 3 TB drive desktop and laptop that I support each other up to a 2 TB.  Recently, I upgraded my computers HD and needed to create a mirror image of the old HD.  So in a moment of weakness I formatted the external HD which put my image of mirror and is gone to work, my laptop HD, which is now my only copy at all, had a problem and all my pictures have disappeared.  I called Transcend and gave me the recovery software and I ran and more 300 000 recovered files. implemented in recup_dir 635 files.  When I called them, they said, I had to sort through them to find what I need.  I looked at my now confusing LR and it says there are almost 64 000 missing photos, not really a PIN in a haystack, but as close as I ever want to be that.  Someone has an idea or experience on how best to go about this?  I'm in trouble... Laughing out loud

  Hello, nice of you to send me a message.  But I think that I have not

  good to explain it.  All my photos were on an external hard drive that

  has failed.  So I called the Transcend tech and they gave me the software to

  the files, in fact he recovered 370 000 files and I need to sort

  through them to Palm them the place to hide them in folders so that I can

  recreate my LR catalog.

  Yet once again, thank you so much for reaching out and have a wonderful day!

  Lewis

  The game, 18:01, Chetna Srivastava, [email protected] , 28 January 2016

• On a Linux operating system, what tools need to developed a real-time application that communicates with FPGA?

  On a Linux operating system, what tools need to developed a real-time application communicating with FPGA?

  It is not unclear to me by reading the documentation on the website OR tools or drivers should I install on a Linux operating system in order to develop a C++ real-time application (that interact with FPGA) which will take place on a sbRIO-9651.

  Is this possible at all?

  Thank you

  Michel

  Everything works very well with an FPGA VI, compiled with LabVIEW FPGA 2015.

  1. I have installed Eclipse on CentOS 7 with cross-compiler found at this link:

  Compilers C & C++ GNU for Linux ARMv7 (Linux host) 2014

  2. I also install a debugger crossed to debug application c / c++ remotly. Once on the page go in the section "Linaro Toolchain for Cortex-A" and download the second link linux "linaro-toolchain-binary (big-endian).  The binary gdb is in there, so you must point towards him in the Eclipse debug configuration:

  Linaro Toolchain for Cortex-A

  3. I installed the linux drivers from NOR-RIO 15:

  Driver OR RIO 15.0 for Linux

  4. I was able to program an application to c / c++ opening and running a LabVIEW FPGA Bitstream in a few steps:

  Example of API Interface FPGA C OR real time Linux and Eclipse

  Michel

• RAM Preview plays is not in real time on the new Macbook Pro

  Hello world

  I have problems getting after effects to play the video in real time in AE CS6. I use a brand-new Macbook 2015 Pro 13 "retina with a dual core 3.1 GHz processor Intel Core i7 and 16 GB of RAM. I just made sure my copy of AE CS6 is up-to-date with the latest updates (11.0.4.2), and yet I am unable to read the video or animation in real time using the RAM Preview to any size greater than 25% in the Viewer.  If I try to play a video clip of 29,976 fps, the framerate tops out at about 17-18 frames per second. When I press 0 for the RAM Preview, it starts caching the images such as normal, but even after a loop continuous cadence comes not near real-time. The audio plays fine, but the video starts immediately behind. I can't even a scene of simple great test of a form of retouching layer move on the playback screen in the real time RAM Preview.

  That said, I can get it to play in real time if I reduce the viewer up to 25%. But obviously, I won't be limited to work in quarter resolution on a new laptop. My last Macbook pro from 2008 and completely across the well treated RAM previews, being able to cache images and play them back in real time without problem.  I have to assume that there may be a function that I'm missing or something goes wrong, unless I just grossly overestimated the capabilities of my new laptop.  But surely, it should be able to manage simple video playback. I had no problem using first on this computer, then it can of course deal with the video.  Any help you can offer would be much appreciated, because this problem becomes really frustrating!

  Just for fun, try the trial of CC 2015 and see if it behaves correctly.

• Is there a way to know what physical events are happening in real time?

  I just had a problem from my phone since last week. I wouldn't do something unusual. Knows running programs with regard to my knowledge and visible only windows are concerned. And my hard drive would be thrown open. I don't know which program is the cause. So I asked for help in the windows event viewer and look under hardware events because that's what I thought would contain the event in question. but it was empty.

  I'm here to ask you all, if anyone can help in this regard.

  Amit

  Hello

  Check these:

  Scenarios selected for monitoring performance with Windows Vista
  http://TechNet.Microsoft.com/en-us/library/cc748962 (WS.10) .aspx

  This free utility makes it easy to check the event logs - since you can check everything
  entry in the final minutes or other periods of time. Any or all of the event logs can be saved
  then deleted to make it easier also for future entries to read.

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
  Set it for a bit before and after the time of the BSOD.
  z http://www.Nirsoft.net/utils/my_event_viewer.html

  =======================================================
  
  Sysinternals has utilties that can help such as Process Explorer, Process Monitor and others. Those
  and others are below.

  This is a pretty complete performance convenience store and a lot of these methods will contribute to
  your effort.

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Read a signal scope works in execution to highlight, but not in real time

  I want to get the maximum value of a waveform to a former stretch of Agilent 54622 via GPIB.

  The problem is that I regularly receive a Visa Read error-1073807339 ("timeout expired before the operation is completed") when running in real time, but NEVER in execution to highlight mode.

  The posts here suggests that the calendar can cause the read to run before writing was able to finish. So, I used one - manually controlled while loop, sequence and blocks waiting for try and ultra Structure separated blocks of reading and writing of overlap between them. But it still does not work!

  Suggestions, please? (Thanks!)

  

  If you happen to open the VI I attached, you will see that I use a serial port. This is because I use a USB of Prologix-GPIB adapter to interface with the scope (I don't have an adapter USB of NOR-GPIB). I used successfully this Prologix adapter for over 2 years to connect perfectly with an amplifier to locking SR830 and several other devices, so I don't think that's the problem...

  What you need is the magic behind fairy!

• Back to cache a sequence the old way. not in real time during the introduction of the cache

  Hi supports,

  I have problems of my sequences caching. As long the AE is always rendered images my reading is never in real time, it will be stutter audio until operations complete are cached. Makes me and my clients go nuts, so every time I want to playback of a composition, I manually turn off the audio, the cache of the sequence playing, which makes them note every time, "Oh a little slow" and "There is no sound" etc and I have to explain that his not playing not, just cached.

  I went back to the old way: Cache first before reading. The real-time playback + caching does not work...

  Also the 'working area of the Cache in the background "has disappeared... Why?

  And Im working on fast mac:

  CPU: 2 x 2.4 GHz Quad - Core Intel Xeon

  RAM: 48 GB 1066 MHz DDR3 ECC

  Boot SSD disk

  FusionIO Cachedisk

  My support is on a fiberstorrage Facilis (4K DPX real-time playback)

  If you have present clients, I totally recommend cache before play (like the old RAM Preview) option. Unfortunately, you can not have cache in the background (yet). I've linked the explanation in my response to your other post.

  Have you seen the preview videos or all the videos of NAB? The next version of AE wants to focus on the stability of playback, speed, etc. so it could get a little better. Acceleration using GPU for some effects (finally!) makes a big difference!

• CTI / read head plays is not in real time

  Whan, I'll see my animated film that I drag the CTI that my animation jumps rather than smooth running so I can see the animation.  It's like if I don't see a step at a time, including at - it a setting I need to change.

  Really, you must generate a RAM Preview to see your reading of the animation in real time.

  It is unlikely that you will see the results in real time by rubbing the CTI, unless you have an extremely powerful computer and a very simple and minimal project.

  Even in this case, it is probably still unlikely.

  Alternatively, you can set the mode of previw to Adaptive Resolution to help scrub perceived, but the resolution of the model will reduce the CPU trying to catch the movement through the timeline.

• At the start of what Firefox says "could not load XPCOM.

  My desktop is running Windows 8, which recently crashed. Since then, whenever I start, 17.1 Firefox (which is in the folder startuo) does not load, but shows an error window saying (unable to load XPCOM). Rejecting the window then allows me to start Firefox myself. I uninstalled Firefox (but not personal stuff), downloaded a new copy of Firefox 17.1 and re-installed... same thing happens.

  Just to clarify... This only happens only once, after the initial start of the desktop computer. I close the error window and everything is fine after that.

  Bright ideas please?

  What makes XPCOM reference? A missing dll file? can I find this file elsewhere and move it to the correct location?

  Many ways.

  Thanks again for all the responses.
  I now put Firefox in my 8 and restarted Windows startup folder.
  All right, Firefox (or Thunderbird) starts as it is supposed to and there is no sign of an XPCOM related error message!
  So... I have to assume that the problem was (somehow) caused by crash my Windows 8 and that (somehow), remove the Win 8 of Firefox startup folder, restart, then put Firefox in the startup folder, and then restart, has put things back where they used to be. A little strange, but I hope that the above may be useful to someone else with a similar problem in the future.
  Well cordially to all.

• If I put a CD in the playback section of CD/DVD & written it says no driver, I tried Microsoft fix it & that's what he says is not readable media in the CD/DVD drive

  Original title: my PC can't find driver when I try

  My PC is windows media player update and since then he said I have no drivers, but only says that if I put a CD in the playback of CD/DVD & written section it says no driver. I tried Microsoft fix it & that's what he said...

  media in the CD/DVD drive is not readable (sony DVD - ROM DDU1613)

  I can't copy discs either, but the section DVD plays ok

  To install codecs for Windows XP, click here to download.

  Click on the KB article number to bring up the article and automatic FixIt.

  Article ID: 291818 -how to Download Codecs automatically in the Windows Media Player for Windows XP

  I hope this helps.

  Marilyn

• spool of printer, where and what - what mine says is not runnig

  When I try to print it says printer spool does not

  You can try to disable your print spooling.  This means that when you print, you must wait for printing to stop before proceeding, but it could be a solution.  To do this, follow the instructions in this article:

  "How to troubleshoot issues that you may experience when you try to print to a local printer by using Office programs in Windows XP"
    <>http://support.Microsoft.com/kb/870622 >

  About 3/4 down there is one subsection titled "change the spooler settings."
  This does not solve the problem, but it might get you going again.

  HTH,
  JW

• How can I chat in pogo games what they say dose not work

  I have tried every thing to trouble pogo chat in games it dosent work any help?

  Hello

  You will have to worked with the support of Pogo. Make sure your Java is up to date.

  Pogo - Support
  http://help.Pogo.com/

  Java
  http://www.Java.com/en/

  I hope this helps.

• Able user to zoom in/out the image in real time the performance of façade?

  Well I have searched this and have developed empty. What I would do, is to have a picture of a diagram on the front panel and during execution of the VI user can somehow zoom in/out the image in real time.

  I know there is something that is called Zoomfactor that you instantiate a way in the block diagram, but that seems to zoom in on a picture of race prior to the program. The zoom is not in real time. There is no possibility of real user to zoom in/out with free will, using the Zoomfactor I see. (Sorry I forgot display name of the service). And I saw messages by a man named George Zou that seems to come with a VI which is closest to what I want, but I pulled the VI site seems not compatible with my computer (my rig is under XP with Labview 2013 currently). So, I was wondering if someone else had found other answers appropriate to my specifications?

  Use a structure of the event to change magnification during execution.

  You can even program your own shortcuts to the structure of the event, for example if the user clicks on a particular point on the picture and you read this coordinate on, and you zoom way at this point remains in the Center... There are many options to play with...