Why wouldn't an input_value_id be in per_pay_bases?

Similar Questions

• Why wouldn't I be able to hear my calls

  iPhone 5 and I am unable to hear from people who call me talk.  They can hear me very well.  If I plug my earbuds I hear them then. What is the problem

  the Lake judyfromfond wrote:

  iPhone 5 and I am unable to hear from people who call me talk.  They can hear me very well.  If I plug my earbuds I hear them then. What is the problem

  Hi judyfromfond of the Lake

  I understand that you are having problems with the inability to hear people talking. I want to assure you that I will do my personal best, I can so we can hopefully work this problem then you can start using your iPhone again as usual.

  Please follow these steps. After each step, see if you're still having problems. If you are not the issues more, you can stop there, if not continue filling all the steps until you finish all. After trying these steps and you still seem to be having problems please post back here and we'll discuss other measures we can try.

  I also want to note for you that if only one person, or only several people can't hear you, I recommend reference you this article of support for them: If you can not hear a person on an appeal or a voice message or if the sound is not clear on your iPhone - Apple in charge. Once they have followed all the steps in there, and they can't always hear you so presumably that the problem may be on the iPhone itself.

  • Step 1: restart your iPhone, iPad or iPod touch - Apple Support
  • Step 2: find the version of the software on your iPhone, iPad or iPod touch - Apple Support
    • If you are not running the latest version of the software, you must update your iOS Device: update the iOS on your iPhone, iPad or iPod touch - Apple Support software

  This Apple support article should also contribute to: If you hear no sound or distorted sound of your iPhone, iPad or iPod touch speaker - Apple supported

  Hope this helps,

  John

• Why wouldn't an index used by here?

  Hello
  
  I run this sql (not in an application but, for research on ad-hoc data). I would have thought that it would use an index. Without filters just a "group by" on the columns of the index itself.
  
  Here's the info. oe_order_lines_all has an index on (FLOW_STATUS_CODE, CANCELLED_FLAG). OE_ORDER_LINES_N20.
  

  Connected to:
  Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
  With the Partitioning, OLAP, Data Mining and Real Application Testing options
  
  Wed 08/24/2011
  
  10:27 AM
  
  XX@d1 > show parameter optimizer
  
  NAME                                 TYPE        VALUE
  ------------------------------------ ----------- ------------------------------
  _optimizer_autostats_job             boolean     FALSE
  optimizer_capture_sql_plan_baselines boolean     FALSE
  optimizer_dynamic_sampling           integer     2
  optimizer_features_enable            string      11.2.0.2
  optimizer_index_caching              integer     0
  optimizer_index_cost_adj             integer     100
  optimizer_mode                       string      ALL_ROWS
  optimizer_secure_view_merging        boolean     FALSE
  optimizer_use_invisible_indexes      boolean     FALSE
  optimizer_use_pending_statistics     boolean     FALSE
  optimizer_use_sql_plan_baselines     boolean     TRUE
  XX@d1 > show parameter db_file_multi
  
  NAME                                 TYPE        VALUE
  ------------------------------------ ----------- ------------------------------
  db_file_multiblock_read_count        integer     32
  XX@d1 > show parameter db_block_size
  
  NAME                                 TYPE        VALUE
  ------------------------------------ ----------- ------------------------------
  db_block_size                        integer     8192
  XX@d1 > show parameter cursor_sharing
  
  NAME                                 TYPE        VALUE
  ------------------------------------ ----------- ------------------------------
  cursor_sharing                       string      EXACT
  XX@d1 > column sname format a20
  XX@d1 > column pname format a20
  XX@d1 > column pval2 format a20
  XX@d1 > SELECT sname, pname, pval1, pval2 FROM sys.aux_stats$;
  
  SNAME                PNAME                     PVAL1 PVAL2
  -------------------- -------------------- ---------- --------------------
  SYSSTATS_INFO        STATUS                          COMPLETED
  SYSSTATS_INFO        DSTART                          05-28-2010 14:48
  SYSSTATS_INFO        DSTOP                           05-28-2010 14:48
  SYSSTATS_INFO        FLAGS                         1
  SYSSTATS_MAIN        CPUSPEEDNW           2832.99472
  SYSSTATS_MAIN        IOSEEKTIM                    10
  SYSSTATS_MAIN        IOTFRSPEED                 4096
  SYSSTATS_MAIN        SREADTIM
  SYSSTATS_MAIN        MREADTIM
  SYSSTATS_MAIN        CPUSPEED
  SYSSTATS_MAIN        MBRC
  SYSSTATS_MAIN        MAXTHR
  SYSSTATS_MAIN        SLAVETHR
  
  13 rows selected.
  
  Elapsed: 00:00:00.03
  XX@d1 > explain plan for
    2  SELECT /*+ index(ool OE_ORDER_LINES_N20)  */
    3   COUNT(*), ool.flow_status_code, ool.cancelled_flag
    4    FROM oe_order_lines_all ool
    5   GROUP BY ool.flow_status_code, ool.cancelled_flag;
  
  Explained.
  
  Elapsed: 00:00:00.01
  XX@d1 > @xplan
  
  PLAN_TABLE_OUTPUT
  -------------------------------------------------------------------------------
  Plan hash value: 531795235
  
  -----------------------------------------------------------------------------------------
  | Id  | Operation          | Name               | Rows  | Bytes | Cost (%CPU)| Time     |
  -----------------------------------------------------------------------------------------
  |   0 | SELECT STATEMENT   |                    |     9 |    90 |   799K  (1)| 02:39:55 |
  |   1 |  HASH GROUP BY     |                    |     9 |    90 |   799K  (1)| 02:39:55 |
  |   2 |   TABLE ACCESS FULL| OE_ORDER_LINES_ALL |    22M|   210M|   798K  (1)| 02:39:46 |
  -----------------------------------------------------------------------------------------
  
  9 rows selected.
  
  Elapsed: 00:00:00.06
  XX@d1 > set autotrace traceonly arraysize 100
  XX@d1 > SELECT /*+ index(ool OE_ORDER_LINES_N20)  */
    2   COUNT(*), ool.flow_status_code, ool.cancelled_flag
    3    FROM oe_order_lines_all ool
    4   GROUP BY ool.flow_status_code, ool.cancelled_flag;
  
  
  9 rows selected.
  
  Elapsed: 01:00:28.07
  
  Execution Plan
  ----------------------------------------------------------
  Plan hash value: 531795235
  
  -----------------------------------------------------------------------------------------
  | Id  | Operation          | Name               | Rows  | Bytes | Cost (%CPU)| Time     |
  -----------------------------------------------------------------------------------------
  |   0 | SELECT STATEMENT   |                    |     9 |    90 |   799K  (1)| 02:39:55 |
  |   1 |  HASH GROUP BY     |                    |     9 |    90 |   799K  (1)| 02:39:55 |
  |   2 |   TABLE ACCESS FULL| OE_ORDER_LINES_ALL |    22M|   210M|   798K  (1)| 02:39:46 |
  -----------------------------------------------------------------------------------------
  
  
  Statistics
  ----------------------------------------------------------
           34  recursive calls
            0  db block gets
     52849143  consistent gets
      7461828  physical reads
            0  redo size
          683  bytes sent via SQL*Net to client
          364  bytes received via SQL*Net from client
            2  SQL*Net roundtrips to/from client
            3  sorts (memory)
            0  sorts (disk)
            9  rows processed

  Please let me know if you need more info.

  In this case, it's probably because of the possibility of null values in the columns.

  Oracle will not create an index entry when all of its columns are null.  You are not filter NULL values in your query to give you all the possible groups the Oracle must see the table.

  Try this, add to your select statement:

  where flow_status_code is not null
  and cancelled_flag is not null

  and see if it uses the index.  But if you want to include NULL values, it must analyze the table.

  Another option could be to add NOT NULL value for column constraints, if any. Then Oracle will know he is not NULL values and (probably) use the index.

• created on iMac pages doc cannot edit on MacBook Air

  I created a doc with Pages on my iMac, and normally I have no problem in editing documents with Pages and my Mac Book Air. All of a sudden my Mac Book Air will not let me load PDF saved in Pages so I can modify it. Why?

  jcpete60 wrote:

  All of a sudden my Mac Book Air will not let me load PDF saved in Pages so I can modify it.

  Are you really trying to use Pages to edit a PDF file?  I don't think that it was still possible.  Why wouldn't all just send the Pages file instead of the PDF of the iMac?

• I can't open all downloads

  Whenever I have download a .zip file, my iZip opens and when I click on the file, you see the screen with weird named folders and it is empty. It happens with any .zip file.

  I am

  

  I just took a glance at their Web site. It's apparently supposed to create a montage image of a .zip file. I have no idea why wouldn't want that. My guess is that it does not work very well. I contacted their support and ask to see this isn't an Apple product. [email protected]

• To access the demo of FinalCut project files

  A few weeks back I downloaded Final Cut Pro demo and created an edited video project. It was working fine! The demo has expired and I bought the application. But after downloading the purchased app, I can't access the files of project original demo version that I produced. Are they gone forever? Why wouldn't FCP keep somewhere on the disk for the sake of continuity and good user experience? I suspect this is a common question/problem, but I can't find any other questions help about it.

  THX in advance,

  -Michael

  YYou should be able to double-click the library you created in the demo version and open it in the version complete. Try right click on it and sselecting opened with Final Cut Pro.

• extensions.blocklist.Enabled; False

  extensions.blocklist.Enabled; False
  prevents the extensions that you install personally be disabled.

  If you have an a bad mozilla should rather provide a delete button for this particular plugin that performs the actions required to destroy.

  Why wouldn't anyone since the age of back remove the button of a Yes Yes No button to quit smoking?
  Maybe cause their stupid enough to take bribes from companies of big brother?

  When in fact long term is not like a bastard for the end user would give tons of money from happy users looking for a permanent donation button.

  Mozilla donations can be made here:
  
  Make a donation today. Join Mozilla

  extensions.blocklist.enabled; false : disables blocking by preventing update

  Extensions are not the same as Plugins, even if they are both classified as Add-ons, as well as themes. Essentially, the Plugins are installed by external programs and are made available to Firefox via the Windows registry. Plugins are not installed in the program files Firefox folders, which is the main reason the plugins cannot be uninstalled from Firefox, only disabled.

• Can I use an Apple TV on a Mac mini/TBD instead of a TV?

  I bought the 4th generation Apple TV yesterday. I don't have a TV, so I use streaming on my Macbook Pro (early 2013) or Mac mini (end of 2014), often using AirPlay. I read somewhere that any Mac with the HDMI connector will be able to connect to the Apple TV. However, when I haven't tried to put in place last night on my Mac nothing happened - no screen set. Then I created mountain BIKING with my projector and it worked fine, so I used it for a few hours.

  My mac mini is connected to my Thunderbolt display. My plan was to have next to the mini ATV, connected via HDMI and we hope to activate and use the ATV through the TBD. Is there a reason why wouldn't this configuration? Or I have to change any input or output parameters?

  HDMI ports are not multi directional.  There are inputs and outputs, nothing which does both.  HDMI ports on computers came out.  On the ATV HDMI port is out.  Ports HDMI TV came.  Projectors have entered HDMI.  As the birds and the bees, inputs connect with outputs.

  I appeciate wanting to use your Thunderbolt display, but unless you can find an HDMI input or an adapter for HDMI output in thunderbolt (not the reverse adapter which are common), you're out of luck.  You would need to connect directly to the screen.

  Apple TV has been designed to serve your HDTV display...

• The file... could not be opened. 10.11.4

  Hello

  just upgraded to 10.11.4. Everything works fine, but I discovered that I can't open any of my PDF files more. The file ' and if ' could not be opened. I can open these files with any other PDF reader, but...

  I really really want to like iBooks but this app is such a huge disappointment, and this version is no different. Why did they not hire someone who likes with it don't. iBooks is just pathetic!

  Thomas

  BTW, when I edited the post, I had to reselect the community. Why? Apple Software Quality feels more and more Microsoftish.

  A brief update here. After a few days the problem corrected itself. I opened iBooks and have downloaded all of the PDF files.

  Why wouldn't he download Collections created on the iPad to Mac?

• HP compaq dc5700 microtour: graphics card for hp compaq dc 5700 format microtour

  Hi Mexico.i have a hp compaq dc 5700 microtour and I would like to know what graphics card is compatible, I want to buy a named Nvidia Zotac Gt610 Ddr3 2 GB compatible PCI express x 1 graphics card, but I don't know if my desktop is supported by this graphics card
  
  Care of real desktop
  Micro processor: Intel® Core™ 2 Duo processor E6600
  (2.40 GHz front side bus at 1066 MHz, 4 MB Cache)

  [I have change the processor]
  
  RAM: 7 GB
  
  But my pc slow
  
  I need whether or not the nvidia zotac gt610 graphics card is compatible with this pc? reason why I want to buy it today

  I can't say with 100% accuracy it will work, but given that HP lists the NVIDIA GF 8400GS 256 MB dual head adapter (PCIe x 1) card chart as supported, I don't see why wouldn't the map you posted.

  It should work perfectly, IMO.

• Impossible to get websites to use respective SSL certificates

  Mac OS 10.10.5

  Server 5.0.15

  I have a question where the default web site ("Server (SSL) Web site" ") is in conflict with the SSL certificates for my three other SSL sites.

  The configuration of my website (Note: server IP is 192.168.1.100)

  • Web Server SSL (all IP addresses) site - cert for domain1.com (work)
  • Domain1.com (192.168.1.10) SSL - cert for domain1.com (work)
  • Domain2.com (192.168.1.20) SSL - cert for domain2.com (cert draws for domain1.com, invalid identity)
  • Domain3.com (192.168.1.30) SSL - cert to domain3.com (cert draws for domain1.com, invalid identity)

  My DNS records:

  • Primary area - Domain1.com
    • A: Domain1.com 192.168.1.10
    • NS: Domain1.com
  • Primary area - Domain2.com
    • A: Domain2.com 192.168.1.20
    • NS: Domain2.com
  • Primary area - Domain3.com
    • A: Domain3.com 192.168.1.30
    • NS: Domain3.com
  • Reverse zone - 1.168.192
    • PTR: 192.168.1.10 Domain1.com
    • PTR: 192.168.1.20 Domain2.com
    • PTR: 192.168.1.30 Domain3.com
    • NS: Domain1.com
    • NS: Domain2.com
    • NS: Domain3.com
  • Reverse zone - 100.1.168.192.in - addr.arpa
    • PTR: 192.168.1.100 server.domain1.com
    • NS: server.domain1.com

  Whatever the cert is selected for the default Web site apply to all SSL Web sites. The only way I can force everyone to use their respective certificates is to set the IP address of the Web site to be the same as the IP of the server (in this example 192.168.1.100). It works, but which prevents the work Profile Manager.

  I'm 99% sure that I have my DNS configured correctly (right now all a records point to 192.168.1.100 as a temporary solution), but I'm willing to take another look, if someone has a suggestion clearly and concisely. Ideally, each DomainX.com would have an IP de.10.20 et.30.

  So how can I do all three Web sites use different IP addresses AND their respective certificates? Is this possible?

  (I appreciate any suggestion at this stage. This question is impossible to find an answer anywhere on the internet after about 9 months of research).

  Solution for someone who comes looking for this problem!

  After talking to the Apple Enterprise support:

  The site services will assuming that you only have one certificate for all Web sites. Unless you want to really roll up your sleeves and get down and dirty with the Apache configuration files, you must have a valid certificate for all areas, you use AND give each site its own IP address.

  When configure you your certificate, the host name must look like this:

  Server.Domain1.com (this is the name of your common)

  *. Domain1.com

  *. Domain2.com, etc..

  I used a StartCom certificate class 2 IV SSL ($ 59 / year).

  Then, assuming you know how to import a verified certificate, use it for all services that need and all the websites you want course (why wouldn't you use https, anyway?)

• Usable memory

  HP Pavilion Elite HPE - 570t, product number: l120AV #ABA

  My system is 64 bit with 8 GB of RAM, Windows 7 Home Premium. It shows 8.00 GB of RAM (3,03 GB usable), why wouldn't he displays all the 8 GB usable.

  WDH wrote: HP Pavilion Elite HPE - 570 t, product number: l120AV #ABA my system is 64 bit with 8 GB of RAM, Windows 7 Home Premium. It shows 8.00 GB of RAM (3,03 GB usable), why wouldn't he displays all the 8 GB usable.

  Hello wdh, you could try to go to the ORB start and in the run box, type msconfig. A small window should open and display the Startup tab, click the Advanced tab and make sure the maximum memory box in the right corner is not checked.

  Close out of this window, restart the system and then see if the correct memory is displayed.

• Equium A60 - cd cannot read

  What part number PSA67E-001001EN see - is this a problem or serial number - just bought this laptop on e - bay and won't work - someone can help me. Supposed to be wifi but does not connect via my router broadband

  Hello

  Sorry, but your ad is very confusing.
  The PSA67E it s a serial number of the laptop.
  But why wouldn't be a problem!
  If you have problems to connect to the WLan router so all first check if the wireless adapter is properly installed. Check the router settings - for example the encryption settings.

• Satellite L300 - 12L is not picking up wireless connection

  I just did a factory restore on a Satellite L300 - 12L sound do not pick up any wireless network.
  Do we know if its material missing?

  Thank you
  Them

  Hello!

  What do you mean with it s not to pick up any wireless connection?
  Can you wireless networks?

  Why wouldn't be a missing material? If your laptop is equipped with a WiFi card (I'm almost sure that this is the case) and you don t have exclamation points yellow in Device Manager that s is not a hardware problem.

  Don t forget WIFI must be enabled with the hardware switch on the computer laptop and FN + F8.

  Good bye

• HP C309a all-in-One go offline at random

  Hello

  A user I support reported intermittent but frequent problems with this printer it will 'offline' at random.

  The scenario is: Vista 64 - bit laptop communicates wirelessly with a WRT54G Router.  Connunicates C309a ALSO with the WRT54G wireless.  The protocol used is WEP.  Assign an IP address to the laptop and C309a is currently via DHCP from the router.  The laptop has the latest HP software installed.

  (BTW, your desktop Mac communicates wirelessly with this Bluetooth C309a and never no problem, but do not know if have bluetooth activated on the C309a for Mac at the same time having IP enabled for the WRT54G wireless may be causing problems.)

  I studied dozens and dozens of messages through many forums on this problem and many solutions are available, but often the wire is hijacked and goes off-topic, or the original poster responds never return whether or not the presented solution effectively resolved the problem.  I haven't met a single thread that seems to nail down this problem resolutely.

  However, what makes the most sense to me, and that most of the notice seems to be centered around, assign a static IP address to the C309a because it loses an address assigned by DHCP as the C309a will "sleep".  I know how to proceed with a WRT54G - since the WRT54G doesn't the ability of static IP address reservation, you assign a fixed IP address on the C309a itself, outside the range of the server DHCP WRT54G assignment.

  But before that, I have a few questions.  I need to understand what is happening when the 309 a goes to sleep:

  (1) the router down the IP of his table?

  (2) when the user submits something to print and the C309a is in sleep mode, what sequence of events occur to wake him up?

  (3) if it DHCP assign a new address because of sleep, why wouldn't he just assign the IP address as last time?  It is a very small network with few devices, and they are always on - not like you have all these devices on and off the network.

  Other discussions focused on firewall issues, but I don't see how this could be the cause this behavior 'offline' intermittent.  With a firewall, if I'm wrong, you don't get intermittent behavior like that - be communicates or is not until you have opened the necessary ports.

  If there is anything else that comes to mind that I should check, please let me know.

  Thanks for any help on this.

  I have the same problem, or so I thought until I discovered that it is only with my Windows 7 PC, my other PC is a HP Netbook XP/Ubuntu and Windows XP. It seems that the version of the 140.0.14.18 HP Solution Center has reported that he could not communicate with the printer C309a on the PC Windows 7 However simultaneously of the XP PC no problems. After a multitude of reinstalling the HP utility I would still lose connection after a day or two.

  My c309a is connected to my unique and accessible via Bluetooth wireless local area network so that we can print directly from our cell phones.

  The solution was very simple, taking the printer off kept the connected Windows 7 PC energy-saving mode. I hope that HP will fix this annoyance bit.