Why your system is pretty darn running updates interrupt any scheduled task, it sucks!

Similar Questions

• While trying to upgrade to remote desktop I get the following error message: Setup cannot update your Windows XP files because the language installed on your system is different from the update language.

  KB952155 Setup Error.

  While trying to upgrade to remote desktop I get the following error message: Setup cannot update your Windows XP files because the language installed on your system is different from the update language. Now, that - what it means and how can I fix it? I have installed SP3

  Eivind Aakhus Hello,

  If you have the latest version of Office installed on your computer remotely, then you need to enable the Active X control.

  Follow these steps to activate the ActiveX module.

  a. open Internet Explorer by clicking the Start button, and then click Internet Explorer.

  b. click Tools, point to manage add-ons and then click Enable or disable add-ons.

  c. in the list view, click to view all ActiveX, ActiveX controls downloaded controls.

  d. choose the one you want to activate, and then select Enable.

• OSX 10.11.2 on end of 2008 with the graphic card Nvidea Quadr 4000 MacPro is unable to open the Nvidea driver manager in System Preferences, CUDA work and updates. Any suggestions? Have tried to install updtyer Combi for OSX.

  OSX 10.11.2 on end of 2008 with the graphic card Nvidea Quadro 4000 MacPro is unable to open the Nvidea driver manager in System Preferences, CUDA work and updates. Any suggestions? Have tried to install Combi updater for OS x, the problem persists.

  If I remember someone else reported the same problem yesterday and Nvidia suggested to reinstall OS x. If yo boot into Recovery and reinstall without formatting nothing should be lost but backup before just I case.

• Why Fx 28 is pretty darn slow very recently compared to IE10 and Crome33?

  I use Fx from eight last year and it has never been slow. But now I am experiencing Fx 28 (updated almost a month back) to be pretty slow since last week. I am using Windows 7 32 bit, 2 GB RAM (250 GB HDD) computer. Other web browser like IE10 and Chrome 33 are uber fast to search the Web while Fx 28 maintains loading of web pages forever (I tried mozila.org, google.com, yahoo.com , etc.). To counter this problem, I have 'disabled' or 'request to activate' all plug-ins (such as Shockwave Flash and Shockwave for Director, JAVA etc.) but it did not help iota of this problem. I scanned my computer with Malware-bytes and good suite AV did not show anything unusual with the system. I have searched the Mozilla support forum and tried other options as well as clearing web cache, use hardware acceleration (check and uncheck), using Fx in safemode, private mode etc and nothing worked. I don't want to switch to another browser just like that so would solve this problem as soon as POSSIBLE.

  Thanks to everyone for their suggestions in due course.

  I reinstalled Fx and unchecked option "enable firfox health report" on the tab "data selection". I don't know what happened but now it does not work (although slow). May be some add-on screwed by updating Fx last time. But I don't know why it took nearly a month to have consequences on Fx.

  Still, I would love to have a quick and light Fx on my system that I got a month back.

• THERE WAS A PROBLEM WITH YOUR SITE. CANNOT DOWNLOAD THE UPDATE OR ANY VERSION.

  stuck on download for hours. your site is down?

  dotcom73 said

  stuck on download for hours. your site is down?

  The *. sites mozilla.org are fine https://status.mozilla.org/

  It seems that you install Firefox with the installation of the small heel online?

  Try the complete offline installation from www.mozilla.org/firefox/all/

• c:\Windows\System32\dbghelp32.dll is not designed to run on Windows or it contains an error. Try to install the program using the original media, or contact your system administrator or the provider of software for support.

  This shows up every time I open a program and when windows starts up.

  Hello kdubu722,

  Try to start your system in safe mode:

  Restart your computer if it is running. Press and hold the F8 key for 3 seconds after your computer powers initially on. Once you see the Advanced Boot Options menu (or beep) you can stop. Up/down arrow keys to highlight your selection. Select Mode safe mode with networking and press ENTER. You should see drivers loading, it may take a few moments. You should then be at the Welcome screen. Connect to your computer using an account with administrator privileges. Now, you download (free) MalwareBytes from here: http://download.cnet.com/Malwarebytes-Anti-Malware/3000-8022_4-10804572.html?tag=mncol install, Update then do a scan of your system in safe mode, to ensure that it is indeed clean! Once the scan done remove anything it finds. Simply restart your PC to see if your problem has been resolved!

  If your system is clean, then run this analysis of Auditor system in SafeMode below files:

  1. click on Start, click principally made programs, Accessories, right-click on command promptand select run as administrator.

  2. click on continue or provide credentials admin if prompted.

  3. in the command prompt window type the following, sfc/scannow (yes he's a space after sfc), and then press ENTER. This analysis may take some time to complete.

  Hope this helps you. Let us know anyway. Make it a great day!

  "And in the end the love you take, is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

• This operation has been cancelled due to restrictions on your computer. Please contact your system administrator.

  Title: original operation canceled
  When I start right click then properties, this happens "this operation has been cancelled due to restrictions on your computer. Please contact your system administrator. "Same thing happens when I click on the taskbar and Start Menu. Also, there are very few programs listed in the start menu. Can someone find it?

  If you see things like this:

  You do not have sufficient security privileges to restore your system.
  The System Restore tab is missing from the my computer properties.
  System Restore has been disabled by group policy.  To turn on system restore, contact your domain administrator.
  The System Restore tab is available, but the turn off System Restore (disabled by Group Policy) box is grayed out.
  The task manager has been disabled by your system administrator.
  The registry editor has been disabled by your system administrator.
  The task manager has been disabled by group policy.
  The registry editor has been disabled by group policy.
  The command prompt has been disabled by your administrator.  Press a key to continue...
  The operation has been cancelled due to restrictions in effect on this computer.  Please contact your system administrator.
  The "Run" option is missing from the start menu.
  The option "Log off."... ' is missing from the Start Menu.

  The usual advice are something in the sense of "something has been disabled in the group policy...". ", and it is probably true that something has been disabled, but you know what something is and what it takes to do about it.

  If you are using XP Home Edition, you will get away with advice to use the Group Policy Editor, since it has no Group Policy Editor in XP Home and only
  really does not tell you where to look in group policy, even if you run the Group Policy Editor.

  You need a complete solution that works for all versions of XP and requires no hunting around in the Group Policy Editor or registry to find where things are that have been disabled.

  Unless you have disabled these things on purpose, chances are good that your system has a malware infection.  The malware knows what tools you use to try to find and remove, for the malware disables the things you are more likely to consume and prevents them from running if you can't find the malware and remove it.

  If your system has this kind of affliction, all malicious software tools you currently use or have used failed to protect your system so that you can expand your horizons malware detection and prevention to prevent these kinds of afflictions in the first place.

  The malware will be happy you trick into thinking that you need to so something drastic to fix your system - as a facility repair, system restore point or a total reinstallation of XP.  This is what it would be like you, but these measures are not necessary.

  You must solve the immediate problem of the tools does not, then scan your system for malware when you are finished.

  No matter what kind of malware you've used analytical tools, they are unlikely to solve this problem, because they cannot tell if the changes made to your system have been on purpose (you or an administrator who makes them) or some malware changed them, so the analysis tools will let these things alone (it's usually a good thing).

  If your system is afflicted in this way, there are probably other things that also do not work - like the registry editor, System Restore and the command prompt, so fix them all at once even if you have not discovered they are broken again.

  These commands from registry removes the registry entries that are stop opening programs.  Although the registry entries do not exist, these commands are safe to run and will work for all versions of XP.

  Before making any changes to your registry, back up the registry with this free and popular tool:

  http://www.SnapFiles.com/get/ERUNT.html

  Open Notepad to create a new text file:

  Click Start, run and enter in the box:

  notebook

  Click OK to open a new Notepad file.

  Copy and paste the following lines of text into the new Notepad file.

  Windows Registry Editor Version 5.00

  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\System]
  "DisableTaskMgr" = -.
  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\System]
  "DisableRegistryTools" = -.
  [HKEY_CURRENT_USER\Software\Policies\Microsoft\Windows\System]
  "DisableCMD" = -.
  [HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionPoliciesSystem\\\]
  "DisableTaskMgr" = -.
  [HKEY_USERS\.default\Software\Microsoft\Windows\CurrentVersion\Policies\System]
  "DisableTaskMgr" = -.
  [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon]
  "DisableCAD" = DWORD: 00000000
  [HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows NT\SystemRestore]
  "DisableConfig" = -.
  [HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows NT\SystemRestore]
  "DisableSR" = -.
  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
  "NoRun" = -.
  [HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
  "NoRun" = -.
  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
  "NoClose" = -.
  [HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
  "NoClose" = -.
  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
  "NoSetTaskbar" = -.

  Save the new text file with extension .reg on your desktop or somewhere you can remember with a name you can remember, something like:

  enableit.reg

  After you save the file, close Notepad.

  Locate the file enableit.reg on your desktop and double-click it.

  Alternatively, you can right-click on the enableit.reg file, choose open with... and select the registry editor.

  Answer in the affirmative to the question... Are you sure you want to add the information in the registry?

  You should then see a message that information has been registered in the register.

  Reboot your system and test.

  You can delete the enableit.reg file when you are finished.

  If the registry editor has also been disabled, we first fix (not a problem).

• Scheduled task runs does not correctly in the Windows XP machine.

  Original title: Troubleshoot the scheduled task.

  I have a scheduled task scheduled to run at 2:30 every night.  The time of execution scheduled next is 02:30 March 2, 2011.  I was not able to know what prevents it from running.  After a diagnosis, I'm sure it's not the exact command, but rather the setting in the scheduled task.  However, this is just in case: cmd /c start 'scan MalwareBytes' / low/b "C:\Program Malwarebytes ' Anti - Malware\mbam.exe" / scan-complete - log - cancel

  I have read many web pages on the resolution of the scheduled tasks, but the principal that I follow is http://support.microsoft.com/kb/308558.  Here is what I checked:

  • The scheduled task folder shows a 27 February 2011 than last time to run
  • Last log written by the application is February 27, 2011, confirming the last Run Time
  • Status column is empty
  • The application runs if I right click on the scheduled task and select run
  • I used 'cmd' and 'start' in a similar way to successfully launch a low priority job in different scheduled task launching a different application of scanning
  • Application logs for all three of my tasks planned for antimalware scans different show that there is a lot of room between the task durations
  • If I right click on the task failed on demand, choose run and wait for the end, success is indicated by a new log file written by the application and a "Last Run Time" update in the scheduled task folder
  • c:/Windows/SchedLgU.txt confirmed that the scheduled task that failed did not run since February 27, 2011, while other scheduled tasks has been run.  After a right click and running, c:/WINDOWS/SchedLgU.Txt shows a successful run.

  All my regular scans are set to run if the computer is idle, and I'm sure that didn't prevent this idling at this hour there.  The scheduled task failed is set to run under an administrator account even if this user is not signed.  He was placed this way well before the last run time of the February 27, 2011, and other tasks are also implemented this way (with success).  Is there anything else I can try?

  I think I found the problem.  I unchecked the option somehow to wake up in order to perform the scheduled task.  Thank you all for your answers.

• Impossible to run a scheduled task of PowerCLI on Windows 7

  Hello

  I try to perform a task of scehduled on Windows 7...

  What I tried:

  AgConfigVirtual.bat

  C:\Windows\system32\WindowsPowerShell\v1.0\powershell.exe - PSConsoleFile "C:\Program Files (x 86) \VMware\Infrastructure\vSphere PowerCLI\vimaxx.psc1"-command '& {C:\VMware\AgConfigVirtual.ps1} '.

  vimaxx.psc1 (necessary to create another as the other file was giving me an error on the psmodules section, so I removed the in this new file)

  <? XML version = "1.0" encoding = "utf-8"? >

  < PSConsoleFile ConsoleSchemaVersion = "1.0" >

  < > 1.0 PSVersion < / PSVersion >

  < PSSnapIns >

  < PSSnapIn Name = "VMware.VimAutomation.License" / > "

  < PSSnapIn Name = "VMware.DeployAutomation" / > "

  < PSSnapIn Name = "VMware.ImageBuilder" / > "

  < PSSnapIn Name = "VMware.VimAutomation.Core" / > "

  < / PSSnapIns >

  < / PSConsoleFile >

  AgConfigVirtual.ps1

  $pwd = get-Content C:\VMware\powerclicred | ConvertTo-SecureString

  $cred = New - Object System.Management.Automation.PSCredential 'user', $pwd

  SE connect-VIServer-Server Server1 Server2, serveur3, server4, Server5-Credential $cred

  $ESXiServers = get-VMHost | Name sort

  $Excel01 = new-Object - ComObject Excel.Application

  $Excel01.Visible = $False

  $Workbook01 = $Excel01.Workbooks.Open("Z:\Servers\ConfigVirtual.xlsx")

  (rest of the script)...

  Ok... When I opened a cmd and run beats, it works normally... connection to all servers and then run Excel to do the rest of the script.

  When I schedule it, it just does not take into account the part of connection and opens the Excel process...

  What I am doing wrong?

  PS: The user has permissions to run as a batch process

  LucD,

  Thanks for your time and your attention =]

  I got it to work... There is a bug when opening Excel using PowerShell files scheduled tasks...

  All I had to do is create the Desktop folder on the recommended way and work for the task.

  Sources:

  Excel - Powershell script cannot access a file when it is run as a scheduled task - Stack Overflow

  https://social.technet.Microsoft.com/forums/WindowsServer/en-us/aede572b-4c1f-4729-bc9d-899fed5fad02/run-PowerShell-script-as-scheduled-task-that-uses-Excel-COM-object?Forum=winserverpowershell

  Thank you once again!

• When I run wic_x86_enu.exe on Windows 7 Starter, I meet "Installation cannot find what update.inf file needed to update your system.

  wic_x86_enu.exe

  When I run wic_x86_enu.exe on Windows 7 Starter, I meet "Installation cannot find what update.inf file needed to update your system.

  I had already run the windown update, the problem remains.

  Please help.

  Thank you.

  Hi YongWaiMan,

  You can run scanning of the file system [SFC] checker on the computer that will replace missing or corrupt files & see if you can download and run wic_x86_enu.exe.

  For more information, you can consult the following link.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  Hope this information is useful.

• in the output log file bit 00's are added, why? (Do not run the attached vi. It disables all devices in your system)

  Hi all

  I've attached a zip file when co-existence.vi is the main file of vi that communicates with a USB device and returns some responses of ATR.

  The answers are stored in a log file. I have attached the log file. In the log file in three places while displaying ATR, get added some unwanted 00's. Please help me how it is and how to remove it?

  Thank you

  Mathan

  [Note: (not to run the attached vi.] It disables all devices in your system)].

  It seems that the duration depends on the value you get out of the dll (dwARTLen). You have wired it as 100, so it seems that the dll simply returns the entry. Maybe you want to check the documentation for the dll on the way to get the actual length.

  A large part of your code is very confusing...

  • You have several subVIs that are essentially the same, but with different names. Not one of these not enough?
  • What is the purpose of the loop IN the adhc.vi? Since you autoindex in a table of a line, it will be executed only once, and the result is the same as if you would remove the loop FOR.
  • Your main VI is extremely repetitive with lots of duplicate code. You have 12 instances of the file name constant, would be enough! Enable.VI is identical to disable.vi, except for a constant of diagram. Much the same constant string ("ATR: ', ' peripheral access card:", etc. "), once again, everyone is enough.

  Here a nice state machine would make all the difference.  You need only about 10% of the current code, eliminating all the rehearsals.

• Mozilla said "your system does not meet the requirements to run Firefox ' but when I check the conditions, my system meets all.

  I am using windows 7 on my hp laptop. When I try to update I get a message saying that I must have at least windows XP. Is there something else blocking my update? I tried the two update a download of the latest version. My current firefox is 13.0.1

  Hi, please, do a right-click on the firefox icon, go to properties > compatibility, and make sure that firefox is not configured to run in compatibility mode (atm your useragent reports that you run windows 2000).
  Thereafter, it should be possible to update.

  Since your profile also show signs of unwanted software on your system, please run a full scan of your system with security tools like the free version of malwarebytes & adwcleaner, which are specialized in the adware and browser hijackers.
  Fix Firefox problems caused by malicious software

• I get a message saying "the media content is not displayed correctly. It is recommended to update your system drive now. Is it safe?

  I just installed Firefox on a new machine. The message indicated in the question appears frequently. The updater executable is called "setup.exe, developed by Bechiro S.L. Norton call this file "Unproven", unknown stability, very few users, very new, not proven.

  Is it approved by Mozilla or is it malware?

  Do you recommend running the installation?

  Hello sperrybream, no download that is not from mozilla.org is approved by mozilla. as you have described the issue, it seems certainly doubtful ("It is recommended to update your system drive now" - there is no such thing as a system drive) & I would definitely recommend not not to react on the popups from unknown sources.

  In addition, you have a malicious this addon. Please go to firefox > addons > extensions & Delete SuperLyrics-16 0.93.19 & GamingWonderland 5.40.2.42655. also, go to the windows control panel / programs and remove all toolbars or potentially unwanted software from there and run a scan of your security system complete different tools like the free version of malwarebytes & adwcleaner.

  Remove a toolbar that has supported your Firefox or the homepage search
  Fix Firefox problems caused by malicious software

• Problems with Windows Update! ("some settings are managed by your system administrator"?)

  I seem to have problems with my windows update. Last week when I checked to see if updates were needed that I was unable to view them because he said that "some settings are managed by your system administrator" who won't let me change the settings and the display of updates. It's my own personal computer so I am the administrator. However, this week update windows begins to function normally because there was an update available and I managed to download it, but a few days later, the windows on the screen update returned to say that "some settings are managed by your system administrator. I did a scan for spyware/adware/virus recently and I had only a low risk of adware that was detected and deleted without modification with windows update. This problem started right after that I got a warranty of software installed by Dell, I don't know if what they did could cause the problem. The system I use is Windows Vista Home Premium Service Pack 2. Any help would be greatly appreciated!

  You can see the effects of a hijackware infection. That being said...

  McAfee applications (and Norton) are known for not not upgrade (or uninstalling) itself.

  1. run this triple McAfee fix: http://service.mcafee.com/FAQDocument.aspx?id=TS100507

  2. After completing step 3 of triple correction, manually & repeatedly update your McAfee application until you get a prompt 'no more updates'.

  3. open Internet Explorer (only) to http://support.microsoft.com/kb/971058 & run it in DEFAULT and modes difficulty then AGGRESSIVE. [1]

  4. restart & test by...

  How will I know if my computer is up to date? :
  http://Windows.Microsoft.com/en-us/Windows-Vista/how-can-I-tell-if-my-computer-is-up-to-date

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• The update does not apply to your system

  I can't run the help files which require winhlp32.exe. while I was trying to install the same.but I get the message that the update does not apply to your system,

  I use windows vista SP2 32 bit.

  Thank you

  Ankit,
  Here is an article about getting the winhlp32.exe for Vista. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.