WIA.dll; Windows image acquisition

Similar Questions

• Windows Image Acquisition (WIA) is not listed in Services.msc

  I bought a new printer (HP Envy 4502) and it connected wireless to my PC. It prints and copies fine but when I try to scan (the printer and PC), nothing happens - message on printer says "computer does not.

  I tried with my firewall off and still nothing. (Use Bullguard security, windows firewall is disabled).

  After some research more advice is to check if Windows Image Acquisition is on, but when I look in the list of services there is no Windows Image Acquisition - in alphabetical order, he jumps 'Police Windows Cache Service' to 'Windows Installer' (accessible via the command Services.msc)

  I also tried to run sfc/scannow, but who doesn't.

  CHKDSK found no errors.

  I tried to download "Windows_Image_Acquisition.reg" and "RestoreWindowsImageAcquisitionWIAWindows7.bat" without success.

  What can I do to return WIA?

  How can I check what are the other missing services?

  Thanks in advance for any help

  Hello Jeff,

  Thanks for posting your question on the Microsoft community.

  Thank you for details on the question and your efforts to resolve.

  'Windows Image Acquisition' service provides image acquisition services for scanners and cameras.

  This problem may occur because of damaged or missing Windows files. This can also occur due to incorrect registry settings.

  Please refer to the suggestions marked as answer by Dale Qiao on June 16, 2010 and check if it helps.
  https://social.technet.Microsoft.com/forums/Windows/en-us/6b0e4eb7-3505-443a-9DCC-faf711743faa/has-anyone-seen-WIA-Statup-problems-in-Windows-7-ultimate-x64?Forum=w7itproinstall

  Note: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://Windows.Microsoft.com/en-us/Windows/back-up-registry#1TC=Windows-7

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Windows image acquisition

  I can scan is no longer on my canon D480 image class. I get the message "windows could not start Windows Image Acquisition (wia) service on computor local e.» Error 1068 the dependency service or group could start

  Hello

  One thing to check is the following.

  Open windows control panel, open administrative tools, and then open Services.  Make sure that the following services (order of th specified below check them) are all showing that status = started and the Startup Type = Automatic

  Remote procedure call (RPC)

  Detection material core

  Windows Image Acquisition

  If you need to make a change to one of the above, just right-click the service and select Properties, and then in the drop-down list box next to "Startup Type", select automatic and click on apply to save the changes.  Then click on the Start button.

  Kind regards

  DP - K

• Problems to import pictures from my Canon Powershot A580 - Windows Image Acquisition?

  All the photos I import into Adobe transfer in a .tiff because of a TWAIN link images?  What I have read that I need Windows Image acquisition.  Can I download this?  If yes where?

  I used to do this with this camera without problems until a recent virus, now I can't it to work.
  Any help much appreciated!

  All the photos I import into Adobe transfer in a .tiff because of a TWAIN link images?  What I have read that I need Windows Image acquisition.  Can I download this?  If yes where?

  I used to do this with this camera without problems until a recent virus, now I can't it to work.
  Any help much appreciated!

  ==================================
  I have a Canon and everything I do is just copy the pictures
  of the memory card. I never install of the
  proprietary software.

  Have you tried to upload photos to a folder on
  your hard drive before import you them into an image
  editing program?

  If you insert the memory card from the camera into a USB port
  media player and go to... My computer... the media
  drive is listed as one or more removable disks...
  If you right click on the removable disk that corresponds
  You can see it with the location of your card is located in the files and
  copy and paste or drag and drop in a folder on your
  hard drive.

  If you don't have a media player... you can connect
  the USB camera and it should show in my computer. John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - to proceed at your own risk

• How do you get the Windows Image Acquisition (stisvc) service to restart?

  HP Pavilion DV6-2088dx running Win 7.0 64 Bit Ultimate

  When I try to restart the Windows Image Acquisition Service I get a message access denied (Services tab in the Task Manager) or an "error 1068: the dependency service or group could start" (in the Services window).

  Hello

  One thing to check is the following.

  Open windows control panel, open administrative tools, and then open Services.  Make sure that the following services (order of th specified below check them) are all showing that status = started and the Startup Type = Automatic

  Remote procedure call (RPC)

  Detection material core

  Windows Image Acquisition

  If you need to make a change to one of the above, just right-click the service and select Properties, and then in the drop-down list box next to "Startup Type", select automatic and click on apply to save the changes.  Then click on the Start button.

  Kind regards

  DP - K

• ERROR POPS UP EVERYTIME I OPEN AND IT SAYS WINDOWS IMAGE ACQUISITION SERVICE IS MISSING

  MISTAKE TO REPLACE ON VISTA

  Hello

  1. When you receive the error message?

  2. did you of recent changes on the computer?

  3. do you have a printer or a scanner connected to the computer?

  Method 1

  Check and make sure that theAcquisition of Image Windows (WIA) service is running on the computer.

  one), click Start-Run, type "services.msc", click on OK.

  (b) when loading the Services window, go to the "Service Acquisition of Image Windows (WIA), double click on it to open it,

  (c) make sure that the "Startup Type" says "automatic". " If it isn't, use the drop down menu to change.

  (d) if she once said: "Automatic", then click on the "Recovery" tab in the upper part and replace the line "First failure" "Restart the Service", then click on ""apply ', then OK. "

  Method 2

  If the previous step fails, see if any third-party program installed on the computer is causing the error message.

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• 'Windows Image Acquisition' does not work

  This message has been appearing whenever I start my Windows 7 Professional 64 bit OS PC.

  I get a dialog box with the option of sending information to Microsoft, but nothing else to give an indication of what the error occurred or what action I might be able to take to correct the situation.

  Since I got this message at the start that I was also see a very slow page on some Web sites load.

  Is it possible to repair this problem of "reloading" WIA... If so where can I find the right software to download.

  Any suggestions are welcome.

  To complete this thread, I have a confession to make!

  It seems that the source of the problem was my scanner Canon LiDE 500F omitting "initializing" when starting. The scanner "purrs and snoring" as it initializes during the boot-up... something that I am so used to what I hear is really it... so I didn't notice that this was not the case, doh!

  Where the 'pilot' for the scanner does not load when starting because presumably the system failed because it could not 'see' the scanner.

  A violin with wired usb on the scanner seems to have solved the problem... much to my embarrassment!

  I hope you don't think that I've wasted your time auggy, because tips have led me to the scanner LiDE 500F as the source of the problem, but a physical connection instead of overflow of software problem. Thanks again.

• Windows Image Acquisition Service

  Since the latest service pack of windows has been installed, I get an error message. His readings there is no application registered for this event. The error reappears if try to close. How can I get rid of this error?

  Click Start
  Type: CMD, according to the results, right-click CMD
  Click on "Run as Administrator"
  At the command prompt, type: sfc/scannow

  This will check for any breach of integrity

  Restart your system releasing It Easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• The application or the DLL C:\Program Files\Mozilla Firefox\MOZCRT19.dll is not a valid Windows image. Please check this against your installation diskette

  The application or the DLL C:\Program Files\Mozilla Firefox\MOZCRT19.dll is not a valid Windows image. Please check this against your installation diskette.
  Help, please. I was unistalling firefox and reinstall them again at least 10 times, but still does not solve the problem

  This has happened

  Each time Firefox opened

  few days back

  User Agent

  Mozilla/4.0 (compatible; INTERNET EXPLORER 6.0; Windows NT 5.1; SV1; InfoPath.2)

  I have the same problem

  deleted expletives - Maurane

• Image acquisition turns off in Windows Server 2012

  I am running Windows Server 2012.  Kind of a necessity, that I also hosts the website of our company.  All updates are installed, and desktop experience is enabled.  Image acquisition Windows is listed in Services, but was originally set to manual by default.  I tried just to start the service, but it stops automatically after about 30 seconds.  I tried the automatic configuration, but it does not start on its own.  I get no error message, and I checked dependencies, which seem fine departure, because repeatedly referenced in many other assignments.  Fresh ideas?

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• How to fix the application or DLL C:\WINDOWS\system32\SensApi.dll is not a valid Windows image. Please check this against your installation diskette.

  I got the message "the application or DLL C:\WINDOWS\system32\SensApi.dll is not a valid Windows image. Please check this against your installation diskette. "When I click on Start, point to programs, point to Accessories, point to System Tools, and then click Activate Windows.

  Thank you!

  The question that I already fixed. As your mentioned before, I have download SensApi.dll and stuck to C:\WINDOWS\system32\.

  After that click on Start, run and type regsvr32 sensapi.dll and then press enter.

  Restart your computer, it works now from.

• Error message - browseui.dll file is not a valid Windows image in the Windows XP computer.

  Original title: how to fix browseui.dll without original windows disc?

  Hello

  Well, kids, here's the deal.

  I myself locked out of my computer and installed PC login now erase my passwords. It has worked flawlessly, and I now have my computer back after months and months.

  There was only a single small strangeness: whenever I connected my computer, he asked me to check my drive. Looking forward to get my computer and running and customized how I like it, I bypassed it the first few times. Then, when I had a few minutes, I thought I had better let the disk check, so I left it.

  NOW, when I turn on my computer, I get an error message that my browseui.dll file is not a valid windows image and my windows Explorer does not work. So I've been doing on the web looking for a solution via the Task Manager, which is a pain. Someone suggested to use the scannow in the command prompt command line, so I tried, but it requires my disk of windows XP which I think can be in a different State with my mother.  So I simply bypassed it whenever he had the drive and VOILA! all peachy.

  Until, that is, I turn on my computer again. We're back in the same place.  Well, this analysis running and without going through the disc each time took me about an hour, and I can't do that whenever I need to use my computer.

  I tried the system restore, no change. I tried from the command prompt and choose a date AND choose "last good configuration" in the menu f12 or f8.  Without peanut.

  We are this:

  1. is there a way to correct this file without the disc?

  2. can I get another copy of the disk without having to buy it?

  3. Although I'm not PARTICULALRY, would be the Windows 7 upgrade solves the problem? (But I really like my XP...)

  If the c:\windows\system32\browseui.dll file is damaged or missing, Explorer.exe does not start and you may see a message like this:

  If the c:\windows\system32\browseui.dll file is corrupted, Explorer.exe does not start and you will see a message like this:

  Explorer.exe - bad Image
  The application or DLL C:\WINDOWS\system32\BROWSEUI.dll is not a valid Windows image.  Please check this against your installation diskette.

  You can click OK and get to an empty office with only your display background image but still be able to maneuver with the Task Manager.

  If missing the c:\windows\system32\browseui.dll file, Explorer.exe does not start and you will see a message like this:

  Explorer.EXE - unable to locate component: this application has failed to start because BROWSEUI.dll was not found. Reinstalling the application may fix this problem.

  You can click OK and get to an empty office with only your display background image but still be able to maneuver with the Task Manager.

  Since we know that XP keeps copies of critical system files in the dllcache folder, you can use the Task Manager to replace the file missing or distressed.

  From the Task Manager, click file, new task (run...) and then click Browse and navigate to the c:\windows\system32\dllcache folder.  Make sure the "Files of type" box is set to show all files (or you will not see any), and then click OK to display all files.

  Locate the copy of the browseui.dll file backup in the folder c:\windows\system32\dllcache, made right click and copy and go back up a folder c:\windows\system32, right-click in an empty area and paste the file there.  Answered in the affirmative if invited to replace the existing file.

  You can then start the Explorer in Task Manager by clicking file, new task (run...) and in the "Open:", enter:

  Explorer.exe

  Click OK to launch the Explorer and your office must return.

  Or after replacing the file missing or suspicious, just restart the system task manager by clicking on stop and choosing restart and then Explorer will start to him only when the system is restarted.

  If your computer to check your drive at every reboot, which means the "dirty bit" on the volume was probably settled and the only way to clear the dirty bit must run a chkdsk/r (which XP trying to do).   The dirty bit can be defined on a volume if there is a power interruption e.g. (plug pulling, using the power button / stop, etc.).

  Sometimes, XP can't erase the bit of impurity in this way and it is preferable to run chkdsk/r from the XP Recovery Console so you can actually see what he does and run it again if necessary.

  If you do not have any bootable media XP start in the XP Recovery Console, you can create a bootable XP (no XP media required) Recovery Console CD and do all your work from there.

  You can even replace the file browseui.dll from SP Recovery Console if it is your desire.

  Need instructions to create a CD of bootable XP Recovery Console?  No Microsoft Support Engineer seems to know how to do this, but I do and will instruct you in the next reply.

• patch W32.dll DSI is not a valid windows image

  While the upgrade of my Quicken10 I found that an upgrade was necessary so I had downloaded on my computer, but when I try to install the message following application dll C:\documents and settings \all users\application data\int.it\quicken\net\common\patch\update\patch w32.dll poster is not a windows image invalid - please check install floppy what about this and I have not received a disc of Quicken for the upgrade , but a download. Is there a problem with windows?

  While the upgrade of my Quicken10 I found that an upgrade was necessary so I had downloaded on my computer, but when I try to install the message following application dll C:\documents and settings \all users\application data\int.it\quicken\net\common\patch\update\patch w32.dll poster is not a windows image invalid - please check install floppy what about this and I have not received a disc of Quicken for the upgrade , but a download. Is there a problem with windows?

  These errors can often be attributed to malicious software. Therefore, the first step is to make sure that you are not infected. The error can also be caused by incomplete or corrupt download.

  Click HERE. Download Malwarebytes. Update Malwarebytes and perform a scan.  Choose to quarantine found nothing. Once completed click HERE and download Superantispyware Portable. A quick, analysis in quarantine found anything yet.

  You can uninstall Malwarebytes if you wish after the scan. SuperAntispyware is portable and does not install. It will be deleted when you delete temporary files. Post back with the results.

• Error message - file inetppui32.dll is not a valid Windows image

  Just started happening after years of use. Each computer xxx.exe file or I try to load I get this error message "xxx.exe - bad Image of the application or DLL C:\WINDOWS\SYSTEM32\intppui32.dll is not a Windows image. valid Please check this against your installation diskette. »
  When I click OK the file loads normally. The problem is that I do that about 50 times when starting. That means "Please check this against your installation diskette"? How this is done? How dooes one to take to solve this problem? Thank you

  Hello

  Please tell us a little more about the system. What is the brand and model of the computer? Do you remember anything specific that past that you think could have triggered these errors?

  In addition, please tell us what you run antivirus software.

  For more information, take a look at this and see the answer marked as the JoseIbarra response.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-performance/error-the-application-or-DLL-is-not-a-valid/fa12c4dc-C175-4399-A0A9-f50aa085c901

  I hope this helps!

• get a pop-up message "c:\windows\system32\ms32clod.dll is not a valid windows image.

  I get a pop up message "c:\windows\system32\ms32clod.dll is not a valid windows image" every time I start up windows XP.

  Can anyone suggest a solution please?
  Thank you
  Teabag123
  Hello
  • What were the changes made before the issue started?
  I suggest you return these methods:
  Method 1:
  I suggest you make a system full scan just to be sure.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
  Method 2:
  a. click Start, click run, type System32.
  b. enter OK
  c. find mcenspc.dll
  d. right-click on the file, then click on Remove.
  e. restart the computer.