Wide screen is not fully used (Win XP, Service Pack 3)

Similar Questions

• Display on a monitor is not fully used. What should do?

  I recently bought a Mac mini (end of 2014)

  OS X 10.11.5 (15F34)

  I use a Samsung 19 inch monitor via mini display port to VGA.

  But the screen is not fully used (black on both right and left of the picture)

  When I go to about this mac > display, this is show 13.9 inch (800 x 600). I changed the resolution of 1280 x 1024 through the display preferences. But it is still not working and this mac > display, shows always 13.9 inch (800 x 600). The image is blurred.

  Help, please...

  You may need to buy a graphics card in order to use a different port on the computer.

  Check the display to see if there are other options of the signal may use another cable.

  A more recent model computer should be able to use a modern with Thunderbolt screen

  connections; Some cables with ends adapter for use with older screens may work

  If the display can be used in this way. Not all of the same works if an adapter may adapt to the form.

  • Apple Mini DisplayPort adapter: Frequently asked questions (FAQ) - Apple Support

  While I have two Mac Mini computers, one is a late 2005 and the other end 2012;

  both can use an HDMI adapter for a 19 inch Samsung works for these at full resolution.

  Mini-Display port to HDMI it works; If not, using lightning.

  One of my screens use one of these cards:

  Apple Mini DisplayPort to DVI adapter

  Some display models require pilots who would be obscure and not included with

  OS X; I have another Samsung that turns, it is supported but you must use a third-

  part control panel app in the old OS X 10.5.8 and OS X 10.9.5. The X OS

  controls brightness and resolution are limited without it.

  {Since the new Mac Mini is more beautiful with a movie theater 20 inch aluminum, it's what}

  He has; the older Mini OK with a Samsung 19 inch (square), and it uses

  control software for OS X settings cannot. Most recent can use Thunderbolt.}

  Not sure if your screen is oldest of those who may need a separate control software.

  There is a updated firmware for Mini Display Port to VGA (himself):

  On the Mini DisplayPort to VGA adapter firmware update - Apple Support

  If you see not all possible display resolutions in displays preferences

  It may be due to the absence of a favorite graphics card. Or a longer display limit.

  • The display of all the possible resolutions for viewing under Mac OS X:

  http://osxdaily.com/2015/08/27/show-all-display-resolutions-external-screen-Mac/

  • About the Mini DisplayPort to HDMI - Apple Support adapters

  You may need the machine support site to test technical research view if you

  not a page printed with line info specifications said. Several different adapters

  are available; You can even use a digital TV (limits) as screen.

  • Learn more about Troubleshooting display issues.
  • Learn what adapters are compatible with the specific Apple computers.
  • Learn more on Thunderbolt and displays ports.

  The technology of the adapter and display need to better match those of the Mini.

  Older tech display should be supported within the limits. Connections and drivers.

  PS: See if the update of the firmware of the adapter you have, will allow him to work.

  If the adapter is an Apple product, it would be able to accept the firmware.

  Good luck!

  edited 3 times

• Why my computer is being a "blue screen" when not in use (can be started Windows 7 very easy) why the blue screen?

  How to stop the computer to go to "blue screen" when not in use. In other words, how can we not shut down the computer for a ~ 10 hours?

  Arthur

  Please keep all your messages on the same topic in the same thread / conversation.

  Click on the following link to access your profile

  http://answers.Microsoft.com/en-us/profile/798d7b71-764c-E011-8dfc-68b599b31bf5

  Click Edit profile and check the box in front of notification by e-mail.

  A suggestion if you are using Internet Explorer 9, 10 or 11.

  Access your profile. Make sure that you have connected. Click all Threads, click on the star to the top right of the screen (you need to press F11 to see if you're reading full screen), click the scroll right to add it to Favorites, and then select Add to Favorites bar. Change the long name for something memorable, and you can immediately access your son in your Internet Explorer Home Page.

• Vista, how can I know when service pack 1 is fully downloaded, I have service pack 2 on the drive, but it does not load until service pack 1 is fully downloaded.

  Vista, how can I know when service pack 1 is fully downloaded, I have service pack 2 on the drive, but it does not load until service pack 1 is fully downloaded.

  I manual installation, it currently seems to be so many downloads, I might switch to automatic installation but I don't want to start the download service Pack2 because it could take forever and I have it on disk.
  Please notify
  Graham

  Hi Graham,

  Thanks for the reply and happy to know that the problem has been resolved.

  If you have problems with Windows in the future, please do not hesitate to post in the Microsoft Community Forums and we will be happy to help you.

• the service windows defender on local computer started and then stopped. Some services stop automatically if they are not in use by other services or programs.

  the service windows defender on local computer started and then stopped. Some services stop automatically if they are not in use by other services or programs.

  Hello

  read this information on the Defender:

  ·                         If you use microsoft security essentials avg avira mcafee norton etc they disable the vista version of windows defender by default

  the basics of Microsoft security has its own version of windows defender

  and other anti-virus programs use their own particular type of application to scan for spyware and malware

  It of nothing to worry and is the default action, which is designed for them to do

  If the above does not apply to your machine to read the information on the below link on how to disable the windows defender service in vista or make an autostart to enable

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-service-in-Windows-Server-2008-or-Vista/

  and here is the method to remove it from startup in vista

  http://www.groovypost.com/HOWTO/Microsoft/Vista/remove-Windows-Defender-from-Vista-system-startup/

  and this is how you would normally activate or disable windows defender in vista from within defenders of own and options tools

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-for-Microsoft-Vista/

       and read this information to microsoft:

  Error message when you run Windows Defender: «Error 0x800106ba»

  http://support.Microsoft.com/kb/931849

  and if you need to change startup programs read this information on the other methods of doing it without using defender

  using msconfig read this tutorial;

  How to use MSCONFIG in Windows Vista

  Here's how to use MSCONFIG in Windows Vista to disable some unnecessary programs that load automatically at startup

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  and also try this program;

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services more

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

• There was an update to Windows XP sp1 would recognize higher than 127 readers ~ 137 GB, why this update was not in the version later service pack?

  (1) there was an update to Windows XP sp1 would recognize higher than 127 readers ~ 137 GB, why this update was not in the version later service pack?

  (2) where can I find so that I can then reinstall windows XP, updated to sp1, install the patch to see the complete player to sp2 and 3 can be installed?

  original title: supervision XP

  Maybe the disc has been formatted as part of your original installation of Windows XP with a pre - SP1 version of Windows.  At that point, he could only format the drive as 137 GB.  After you upgrade to a post-SP1 version of Windows, look at your hard drive with Disk Manager (start-> Run-> "diskmgmt.msc").  It can show the rest of your unused space that you might then be able to allocate in a second partition.

  If you want to keep one big partition, you will need to get a 3rd third party tool that can extend your current 137 GB partition to use more of the available space.  Google for it, plenty of them out there including those that are free.

  HTH,
  JW

• Permission to use Windows XP Service Pack 2

  In the name of Allah

  Hello

  I am Ali from iran.i am IT (e_commerce) iran student.in I cant't buy the original windows cd and I need to buy a copy of it.i dislike violate copyright.i want to ask who I have allow you to use the copy of windows xp service pack 2? This copy is about $ 3 if it is the other way to use windows xp service pack 2 in iran, please, say it.

  Thank you very much.

  Hi IT_Student,

  Microsoft recommends not to use a pirated copy of Microsoft Windows XP on your computer, you must purchase an authentic copy of the operating system of Microsoft store and install on your computer.

  I suggest you visit this below link provided to download the genuine Microsoft products.

  http://www.Microsoft.com/Windows/Windows-XP/default.aspx

  http://www.Microsoft.com/windowsxp/downloads/default.mspx

  To visit the Microsoft store:

  http://store.Microsoft.com/home.aspx

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• Windows vista service pack 2 - will not recognize the presence of service pack 1

  Here's the situation

  I installed Windows service pack 1 (32-bit)
  computer restarts
  tried to install service pack 2, but it will not be installed because he thinks that I have not installed service pack 1
  went to automatic updates yesterday and he said that I had to install service pack 1, so I let him install that
  Updates checked to automatic update today... He always thinks that I need to install Service Pack 1 I did
  tried to install SP 2 but he always thinks that I have installed SP 1
  My ultimate goal is to install parental controls of Windows, but I think that's not possible unless I have SP1 and SP2 and Platform for Vista update

  Hello

  Click Start > right click on computer > left click on properties > see if you have Vista 32 bit or Vista 64-bit installed.

  It will also tell you here what Service Packs, if any, are already installed.

  Then, choose the download of 'bit' OK to use to install Service Packs, first of all the installation of SP1.

  Vista SP1 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=30

  Vista SP1 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=21299

  Vista SP2 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=16468

  Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669

  And if you have any problems:

  There is a Forum that Microsoft has put in place for problems with Vista Service Packs. If repost you the Forum they will definitely try to help you here...

  http://social.technet.Microsoft.com/forums/en/itprovistasp/threads

  See you soon.

• How to install driver for canon bjc1000 (using windows xp service pack 2 drivers) on widows 7 starterpack?

  How to install driver for canon bjc1000 (using windows xp service pack 2 drivers) on widows 7 starterpack?

  XP drivers for XP, NOT of Windows 7...

  Go to control panel > devices and printers > click on "add a printer".

  The computer will search your but probably not find it, then click on the box "" does not appear the printer that I want to ".

  A list is displayed, but the printer is not in it, then click Windows Update. After a few minutes, a revised list will appear and if you click on the cannon, the BJC 1000 is in the list.

  Click on 'NEXT' and follow the installation instructions...

• Can I remove xp pro SP2 if I use xp pro service pack 3?

  Please excuse the naivete of the question, but remove the XP Pro Service Pack 2 installation and updates of my computer that I use XP Pro Service pack 3?

  Is it safe to delete the folders $ $NtUninstallKBxxxxxx
  http://www.PAGESTART.com/NTUninstall.html

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• Can I use Windows XP Service Pack 2 with Windows Vista Windows Live Mail?

  Can I use Windows XP Service Pack 2 with Windows Vista Windows Live Mail? Windows Live Mail is slow what it is first.

  And,

  can I change the Windows Live Mail to Internet Explorer without losing files in e-mail. If so, please send the instructions of deteiled.

  Thank you oldknight59

  Hello

  (1) what do you mean 'Can I use Windows XP Service Pack 2 with Windows Vista Windows Live Mail' ?

  (2) who is the provider of mail service?
  For problems with Windows Live mail, please ask your question in the windows live forum
  http://answers.Microsoft.com/en-us/windowslive/Forum
   
  Suggestions for a question on the help forums

  http://support.Microsoft.com/kb/555375
  Answer with the information required to help solve the problem.
   

• I use Windows vista service pack 2 and when I download an attachment to an email and try to print I get this error message: Error Message 0 X % 1 in the message for %2 file

  original title: Error Message 0 X % 1 in the message file for %2
  I use Windows vista service pack 2 and when I download an attachment to an email and try to print I get the above error message.

  How I can fix

  Hi SusanReid,

  1. what email program are you using?
  2. you are trying to download from webmail or any mail client?
  3. don't download you and save the attachment or open it directly?
  4. What is the brand and model of the printer?

  I suggest to save the attachment and then print.

• Satellite U305-S7432 freezes and does not sometimes using Win XP

  Hello.

  I have a portable Satellite U305-S7432.
  Initially, it came with Vista, but I reformatted with XP Pro. I have installed all updates up to service pack 3.

  My problem is that sometimes when I try to restart the computer, simply, it freezes and does not meet any entry. I noticed that this happens if I close and then open the cover (which means that the computer goes mode sleep entry and returns).

  Please note that the splash screen works perfectly well and the computer wakes from sleep fine but then when I try to restart, the computer will simply spend time instead of restart.

  If it goes into sleep mode, reboot takes place as planned.

  I installed all the drivers and there is no question mark in Device Manager. I've updated the latest chipset from Intel (for the mobile 965) driver as well. Finally, I also tried to add /forceresetreg my Boot.ini file (as suggested: http://support.microsoft.com/kb/822624) but nothing helps.

  Any ideas?

  It is a series of laptop computers Toshiba us and you should check the Toshiba driver page for available drivers:
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_sc_home.jsp

  If you will not find XP drivers for this page, then you can try to install unique drivers for Sat U300 since European Toshiba page but I not quite sure if these drivers XP will work on you Sat U305 Mr. but it s worth a try!

  Good luck

• DVD problem after installing Win XP Service Pack 2

  After installing XP Service pack2 son of college clicked on a question about activation of WinDVD 5 for Toshiba and now my DVD does not load the program. How can I fix it, remimbering I need help step by step?

  WinDVD is the least of your problems: WinXP SP2 should be installed no later than October 10 2006!

  If the computer running Windows XP Gold or SP1 until earlier, may not be a critical functional application of antiviruse protection installed and 3 + years of security updates have not been installed.

  See...

  Help: I got hacked. Now what should I do?
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) won't fix this!

  HOW to do a clean install of Windows XP: see method 1 and http://michaelstevenstech.com/cleanxpinstall.html#steps in http://support.microsoft.com/kb/978307

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or one local network (i.e. other computers) otherwise and before using a flash drive or the SD card that is not brand new, or has not been freshly formatted:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Other useful references include:

  HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

  HOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  Tip: After getting the computer fully patched, download/install KB971029 manually: http://support.microsoft.com/kb/971029

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the removal tool before installing updates, Windows Service Packs or IE upgrades and before installing your new anti-virus application (which will require WinXP SP3 [1] needs to be installed).

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  See also:

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  Good luck!

  ================
  [1] extended for WinXP SP2 support ends July 10, 2010. After this date, the computers running under that WinXP SP2 will NOT be offered for additional updates of critical security, automatic updates do not work, and site Web Windows Update won't be available until SP3 is installed.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Computer goes down to start-ups, blank screens, random reboots after the installation of Service Pack 3.

  Original title: problems since "Upgrade" from XP SP2 to SP3.

  I missed experience boot-ups, blank screens, random reboots and having to reboot several times to get my home page & then Office to appear since I updated to XP SP2 to SP3 - a Microsoft again found a solution to this bug or should I use the system restore and go back to SP2?

  Hi Gary,.

  You receive an error message or code when the computer does not start?

  It would be possible that Service Pack 3 is not installed correctly.

  (a) I suggest to uninstall Service Pack 3 from your computer.

  How to remove Windows XP Service Pack 3 from your computer

  (b) you can manually download & install Service pack 3 from this link and check if the problem persists.

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5B33B5A8-5E76-401F-BE08-1E1555D4F3D4&displaylang=en

  
  Note: system requirements to install Windows XP SP3

  
  Reference: Learn how to install Windows XP Service Pack 3 (SP3)

  Hope the helps of information.

  Please post back and we do know.