WiFi connection falls back only when the Satellite L650 is sitting on the glass desk

Similar Questions

• Display shuts off and comes back only when the Satellite A210 is restarted

  Hello

  Satellite A210 display goes off in time and returns only when the computer is restarted.
  Duration usual DURATION 30 or 45 minutes

  Please advice
  # Is it a hardware or software problem?
  # Some other face same problem brings advice?

  The machine is a year and a half old runs windows vista Basic that comes with it.

  I reinstalled the drivers card display also the problem remains same

  Hello

  Have you tried an external monitor on the laptop?
  If the external monitor works fine, it seems to be a problem of internal display and must be replaced.

  You use the factory settings on your laptop computer or you have installed your own version of Windows? Before turning to an authorized service provider, you need to restore factory settings to determine if it s a hardware or software problem. With the factory settings, everything should work fine and if not, I think it s a hardware problem.

  Check this box!

• My Airport Express will randomly start flashing orange and I have to unplug it to make it back to the green.  Wifi continues to operate even when the light is orange flashing.  Anyone know why this is happening?

  My Airport Express will randomly start flashing orange and I have to unplug it to make it back to the green. Wifi continues to operate even when the light is orange flashing. Anyone know why this is happening?

  The next time you see the flashing light amber...

  Open Finder > Applications > utilities > AirPort Utility

  Click on the image of the AirPort Express

  If you see a button update, click on update the firmware on the airport

  

  Otherwise, find status and click on the little orange dot it. A message will appear to say why the airport complained and suggest a remedy for the issue.

• Interruption of the WiFi connection.  Green light is the Airport Express. Settings Network said the cable for the Wi - Fi connection is not connected or the device at the other end does not respond.

  Interruption of the WiFi connection.  Green light is the Airport Express.  Settings Network said the cable for the Wi - Fi connection is not connected or the device at the other end does not respond.  Tried to reset Airport Express, but remained light amber or orange flashing.  I unplugged it and waited and plugged back into the light turned green.  Rebooted computer (Mac Pro). Parameters of said the same thing.  Managed to create a WiFi "network with the ethernet in the network settings section, and yet I am wireless.  I am online but not wired and WiFi settings still says not connected, and either the cable for the Wi - Fi is not plugged or the device at the other end does not respond. I don't understand this situation.  My original WiFi name disappeared.  How I am on the internet?

  What is the brand and model of the modem Internet you have the AirPort Express directly connected by Ethernet? What exact model number is your Express?

• Skype rings only when the application is open

  I have a Skype number for my phone a few days ago and I just noticed a problem. When people try to call me using my Skype number, it sounds only when the application is open and the phone is unlocked. However, people can still call me normally on my Skype ID, it is locked or not currently open to the app. It's a rule I missed when having a Skype number?

  I reset my phone to factory settings and it works now.

• Skype number rings only when the application is open

  I have a Skype number for my phone a few days ago and I just noticed a problem. When people try to call me using my Skype number, it sounds only when the application is open and the phone is unlocked. However, people can still call me normally on my Skype ID, it is locked or not currently open to the app. It's a rule I missed when with a Skype number?

  (Previously posted this in the Android subforum)

  I reset my phone to factory settings and it works now.

• My Ipad charger charge my iphone 5s only when the phone is turned off

  Hi guys. My Ipad charger charging my iphone 5s only when the phone is turned off. The phone does not recognize if it is on and I can't transfer files with it. Help, please?

  Hey Bigfootinyourface,

  I understand that you have a problem with your iPad charger or cable. Accessories and connectors uncertified can often result in the mentioned behavior. Article in the link below provides information that you may find useful.

  Identify the fakes or not certified lightning connector accessories
  https://support.Apple.com/en-us/HT204566

  See you soon!

• How the LED lights up when a threshold is reached, then turns off only when the value does not reach the threshold for a while?

  Hi, I want to write a program that can turn on the LED when a range of value, this is the threshold and only when the value does not reach the threshold for a period of time, say 5 seconds, then the LED will turn off, otherwise it will remain. How can I achieve this in labview? Can someone help me? Really thanks!

  I assume that you use a while loop to keep the updated value.

  Add a record to offset to your looping it initialize with a U32 (time in ms)

  Add the registry to offset to your loop that keeps the previous value of your bool

  When your reaches the threshold value => the light and set the current time in your shift register.

  In the next iteration of the loop weather check value is still above threshold

  => Y-online previous set to true?

  => Y-online the next iteration

  -Online N => turn switch on and set the current time in your shift register.

  -Online N => subtract the time current less time shift record-online more then 5 seconds?

  => Is => keep turning on

  -Online N => turn given

• FM Radio has its out only when the screen of the phone is turned off

  FM Radio has its out only when the phone screen is turned off. Even for the speakers or headphones.

  I SOLVED!
  I had turned on 'Ok Google' and set it listening to "from any screen. Looks like Google to try and listen to all the time and blocks Radio FM output for headphones and speakers

• Why a normal digital text read like a phone number on my site only when the display on the phone or Tablet?

  Hey everybody.

  I'm working on a website and have an ABN followed of the digital text however it does not read as text on a phone or a tablet. In fact, numbers are invisible and when you click it then numbers and calling area is triggered.

  How can I fix this please.

  Help.

  Double post of why a normal digital text reads like a phone number on my site only when the display on the phone or Tablet?

• Show LOV only when the field is empty

  Hi all
  My surroundings:
  Oracle 10g on Windows
  Forms [32 bit] Version 9.0.4.1.0 (Production)
  Oracle Database 10 g Enterprise Edition Release 10.2.0.5.0 - 64 bit Production
  With partitioning, OLAP, Data Mining and Real Application Testing options
  Oracle Toolkit Version 9.0.4.1.0 (Production)
  PL/SQL Version 9.0.1.5.1 (Production)
  
  My problem:
  I have a field in a block, which is text_item and is linked to an element of LOV. I want the LOV appears automatically, whenever I tab in there, only when the element is EMPTY (for example when I try to insert in the block). When, upon request, it should show only the value in the field, and user can choose to activate the LOV, by pressing F9, if she wants to. It now displays automatically each time text agenda is a debate (works very well when the user is inserted, but annoying when she questioned the shape and trying to tab thru.) Every time she focuses on the field, LOV is popping up!)
  
  The current setting for the property on the element of text field: Type: text element
  The list of values: MY_LOV_NAME
  Validation of list: Yes
  
  Properties on MY_LOV_NAME
  Auto display: Yes
  
  Any suggestions? Or trigger level I can use, and if so, what build_in can use?
  New forms and will greatly appreciate advice from pros!
  
  Thank you
  Libran_girl

  It's very simple,

  IN once - new - item - Instance

  DECLARE
  V_LOV BOOLEAN;
  BEGIN
  IF: NOM_ELEMENT IS NULL
  THEN
  V_LOV = SHOW_LOV (LOV_NAME);
  END IF;
  END;

  Try it, you will get your result, if it doesn't work, try: block_name.item_name

  Abbas

• Calling a function only when the State is active

  I turn to find the event just to call a function only when the status is active. In fact, I created a State to display the 'product details' click and once the system changes to this State - I have to perform a function.
  
  Here's the context:
  
  Let's say that you are on the home page where you will need to click on a product to see details. By clicking on the product, the State to view the details of the product will be activated and a variable inside the new state you will receive all the data (from the class of product). But I discovered Flex run all States at the beginning and we need to watch how declare our function to make sure that we do not have a null to a variable/object reference. Given that value is moving to the State only when the click event to occur, the process of globalization, execution of all States at the beginning will not have any value yet (for the specific product to deal with in the State of the productDetails). So I can't use creationComplete to perform a simple function like setSpecs(), where all the values (for example, width, height, circumference, diameter, price, etc.) will be instiate specific labels.
  
  What event to use to call a function internal once we are in the State? Just using the creationComplet and stated if he check the currentState = that I have to work on is not enough. I tried 'activate', 'show', 'enterStage' and many others, but without success. I tried to search the Internet, but it seems that this problem is not popular enough to generate sufficient results.
  
  But I know that it is possible in the case otherwise it will be is not logical and since Flex work very well with the event, I found the right event. It's something basic I know, but when you do not know, it seems difficult to find! ;-))

  Thanks Greg!

  I agree, this is a better method. So I'll change my SENSITIVITY to use viewStack instead of the State. But the problem persists what that, if we use the viewStack State to launch an event only when the State/viewStack is displayed on the screen.

  I found something that works very well for me: updateComplete.

  First of all, I found this before reading your information about viewStack so it worked very well for the method of the State. That I decided to do a test to viewStack and made the necessary changes to the code to reflect a viewStack navigation and make sure the updateComplete was not within my component (stateProduct.mxml). The system was not able to view the specification as the setSpecs() function was not instantiate when displayed. I added the updateComplete = "{setSpecs ()} ' and everything worked great!" So I conclude that no matter if you are using a viewStack State, the updateComplete event can be used to run or functions only when the component is displayed on the screen.

  Now, I have to make my transition between the State working with viewStack effect! ;-))

  Thanks to Greg for this useful tip!

• Phone to download a lot of data via WiFi only when the charger is plugged - iPhone iOS 9.3.1 6s

  Hello

  Just today, I noticed that my iPhone 6s was download continuously at the speed of the network via WiFi only when is plugged in the wall charger or the USB loader on the computer. As soon as I stop charging the phone, the download stops. I have no idea what download and I'm a little frustrated because my connection high speed/wireless home is capped.

  Sync to iTunes on WiFi and iCloud backups are disabled. I had subscribed to 9.3.2 iOS beta on the registration by registering with my Apple ID last week, but I haven't added the certificate so that it can download OTA or via iTunes. I have no update available on my Apple store as well.

  I noticed the slowdown on my cause of internet connection of desktop computers that my phone of summer download something on wifi while he is in charge and I also saw the use of the network by using "System Monitor" app on the App store.

  Kindly help me to solve this problem.

  Thank you

  I did a factory reset on by phone by "Erase all content and data" and chose to set up as a "new iPhone" after reset done. There are now only apple applications on the phone, I connected to wifi with the charger plugged and the problem persists. I wonder if it was to be an apple iOS update, I am on iOS 9.3.1 and 9.3.2 is still in beta, I'm not sure if there is an apple update going on in the background.

  Kindly help.

• Satellite P30 seems to completely charge the battery only when the unit is turned off completely

  Hi, I have my Toshiba Satellite p30 and only works on battery. This unit operate on sector or only on the battery as after the period of time go down the warning, then closes. The orange light fades in and out, but seems that it will only fully charge when the unit is turned off completely.

  I only just received this unit so bit of a novice.

  MASH

  Hello

  normally, the battery should always charge until it is full when the power is connected.
  If you have an orange light flashes, it means that something is wrong. Maybe your battery is faulty or something else. This should be checked by a technician.

  Good bye

• Data on 'Back' button pressure only when the cursor is in the text field

  All,

  With the help of members of the forum, I understood how to use the 'Touch down?' event to send text series when the user presses the button «Back»  Is there any way I can limit this function so that the data is only sent when the cursor is in or on the correct text box AND the user presses the return key?

  Thank you very much.

  You will be most of the way, if you change the event handled in a key event down to the control of the string, rather than for all VI.  This way, you haven't really even to worry about key priorities.  You have control over the "Limit to the single line" value chain so the new line in fact will not be added to the string, but you will always have the event.

  The other problem is that you read the value of string outside of the structure of the event, so the value you write to the indicator will be flawed when it is written.  The string value is not actually until you press the Enter key.  The event fires at the point where you hit enter so that it uses the value that is on the line at the time, which is the value before you hit enter, then your indicator gets old.  There are several possible solutions.  A simple, but not necessarily good option must set "Update of value while typing" and assumes that the user will always wait for at least 10 ms between the last strike and enter.  Of course, if you increase the timeout value you may miss some characters, and there isn't really a need for a case of timeout to all in the structure of your event (just another case for the power button).  Putting control of the Terminal string inside the structure of the event does not solve the problem - again, the event occurs before the new value is treated - but, oddly enough, reading the value of a property within the structure of the event node works (while reading a local variable does not work).  It could also save a dynamic event that triggers the update based on the control indicator.  You can add a registry to offset Boolean to act as a flag and handle the case of the value has changed for the control of the chain as well.  In the case of the value has changed, if the Boolean value is set, updated to the indicator and always set to Boolean false.

  Sorry it's all rather complicated, there are quirks to LabVIEW treatment event.  Reliable the more straightforward approach is probably reading the control value of the string to a property node in the case of the event.  While property nodes are not generally recommended, especially for obtaining or the settting a value when the terminal is on the same side, in this case I think that it is the least complicated solution.