WiFi continues to mess up out of no where

Similar Questions

• My Airport Express will randomly start flashing orange and I have to unplug it to make it back to the green.  Wifi continues to operate even when the light is orange flashing.  Anyone know why this is happening?

  My Airport Express will randomly start flashing orange and I have to unplug it to make it back to the green. Wifi continues to operate even when the light is orange flashing. Anyone know why this is happening?

  The next time you see the flashing light amber...

  Open Finder > Applications > utilities > AirPort Utility

  Click on the image of the AirPort Express

  If you see a button update, click on update the firmware on the airport

  

  Otherwise, find status and click on the little orange dot it. A message will appear to say why the airport complained and suggest a remedy for the issue.

• Satellite Pro L300 WiFi continues to drop and doesn't reconnect until you restart

  Hi, I have a Satellite Pro L300, number of model PSLB9E - 00G007EN running windows Vista professional.

  Recently I started trying to connect to my wifi at home instead of using the ethernet cable.

  Research shows my home network and then I connect with the password, everything all right at this stage, sometimes an hour, sometimes for 10 minutes and then the connection disappears. When I try and re-connect it does not find any wifi network, but I have not moved from where I was when I was connected. I have I-phones, etc. and another laptop running windows 8 connected wireless, and there is no problem with any other machine, just my toshiba!

  Sometimes if I turn off the wifi using the switch at the front and then put it again which solves it, but once again only for another 10/20 or 30 minutes. Sometimes even that does not work and I have to restart the machine to find the network! It works, but once again for a limited period until he gave up the connection and it disappears again, back to square one.

  I even tried to take this work and connect to the wi - fi, but still exactly the same thing happens, so I think I can rule out problems with my home network / router.

  I'm not very good with computers, but have managed to check if the driver is up-to-date, etc., and all appear here... Help, please!

  Post edited by: ANDY2807

  I think that the wireless is the following: Realtek RTL8187B Wireless 802. 11b / g 54Mbps USB 2.0 Network adapter

  The driver version is: 6.1162.610.2009

  My Windows Vista Business 64-bit is by the way

  > I think that the wireless is the following: Realtek RTL8187B Wireless 802. 11b / g 54Mbps USB 2.0 Network adapter
  Yes, you are right, the laptop seems to be equipped with the Realtek RTL8187B WLan card.
  This wireless network card supports 802.11 B and G standard.

  First update the WLan driver.
  Here you can find the latest WLan drivers available on the Realtek page:
  [Driver Realtek RTL8187 WLan: http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=21&PFid=40&Level= 5 & Conn = 4 & DownTypeID = 3 & GetDown = false & downloads = EU tr]

  This driver is for Win XP / Vista / Win 7

  In the event that the issue will not be resolved, go to the Device Manager.
  Choose the WLan card-> properties and go to the Advanced tab
  Here, choose either the 802 standard. 11 B or G. This setting depends on the settings of your router. If your router supports 802. 11 G, you must choose G

• I have VSS enabled on my server sp2 Windows server 2003 and out of no where the tab versions previous disappeared...

  I have VSS enabled on my server sp2 Windows server 2003 and out of no where the tab versions previous disappeared for all users when you access from anywhere.  I deactivated and reactivated the snapshots and it won't come back please advise...

  Hello ErekBye,

  Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is related to Windows Server 2003 and would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

  Best regards

  Matthew_Ha

• If a select query is toggled (in CAR) it will restart the query or get out of the where he was?

  Assume that he has already extracted data and running (say join or sort) now and the node crashed, it will restart the query or out of there where he was

  As Hemant says, it "will resume' If your system is properly configured, but the way he is to restart the application, but not to send to the client data he already saw - so if you have a query that takes 5 minutes to send all the data and the instance crashes with 10 lines to go to the falied on request will take something like the same 5 minutes to get to the point where it can return the 10 rows.  (If in doubt, test).

  Concerning

  Jonathan Lewis

• Forest line continues speeds and zoomed out or say NO, but should?

  Here's my simple problem that I can't solve.

  I'll try to be as detailed as possible because I don't know what step needs to be corrected.

  I would like to create a view of the landscape seen by someone on a sled ride down the Hill.

  It starts with a winter in extreme forest clogged then the trees begin to move to the left so slightly, then speed up to the bottom of the Hill and then decelerate and zoom back a fine on the horizon line while slowing, but still moving to the left of the screen.

  How I decided to create this scene:

  1. I created a nice multi file layers in Illustrator with all the trees that overlap between them. The file is the width of the artboard maximum authorized by the Illustrator.
  2. I imported this file multi Illustrator layers into After Effects as a model with separate layers.
  3. I assigned slight movement in the layers of right left at different speeds. He adds a dimension to the view you see a line of trees behind the other at a slightly different speed. This step does not seem to create problems.
  4. I continued in the construction of the continuous line of trees extending to the right by duplicating imported Illustrator layers until I've reached the limits after effects Comp size of the canvas. I think it's to 30000 or 60000 pxls. The reason why I need big trees is because at the beginning of the animation we see at the very end upward with all the leaves and the branches visible. Then the line of the forest begins to move to the left and accelerates.
  5. Finally, it accelerates and zoom at the same time enough to end on the right. At that time, the trees are 50% the size of the screen. Reimport the layers of my tree and perfectly match them the couture and affect the speed and if it continues to pass in front of the Viewer to the left of the scale and I wander into perspective.
  6. And now everything goes wrong. I have perfectly match the original line points of tree and the extra trees limit. I see that well, they affect each other in the beginning of the movement and at the end.
  7. However, unexpectedly in the Middle, they start to overlap and move a little faster. For example: the left end of the second line of forest key the right end of the first line of the forest initially to 10 sec and it touches the same to end at 20 sec. However, at 15 sec it accelerates and directly past the right end of the first line of the forest. I tried to fix it by doing a keyframe to 15 sec and harmonizing again. It has two small jumps 12.5 dry and dry 17.5. If I continue to overlay on between frames the left end of the second line of the forest continues to make small jumps between the two. If I try to set the zoom at the again it messes up everything. I have set up my anchor to the left of the layer.
  8. I thought that the problem is with scale, so I did the 3D layer and began to cut a Z dimension but got the same result. The layers of jump each other and it does not appear as a continuous movement.
     POTENTIAL PROBLEM: I assign simple ease, facilitated in a deceleration, so my acceleration and deceleration were nice and smooth movement. However I tried to match the speed and the speed in the window options Key Frame (double click Alt on PC opens this dialog window) between the original and the extra lines of forest.

  I can't make this line of forest long enough in a static window that I arrived to the limitation of the width of the canvas size after Efffects. I need very large because it starts at extreme close and then zoomed out to extreme and a horizon.

  I can't make a moving line and keep patching up as movement is inconsistent and lines beginning to speed between keyframes and overlap.

  I have the problem, it's the combination of the right side to the movement of the left and the zoom motion (which I tried both ways: scale layer to a 2D layer and the Z Dimension in the 3D layer) but I can't match even the linear speed of the lines of forest from right to left. There may be a problem with how I'm trying to match it.

  I even rebuilt the entire project if anyone can list the steps how make a continuous line of patched up items synchronized, so that they seem like a continuous image line.

  Difficult to really grasp the situation without a few screen grabs, but some general thoughts:

  If all your elements are the vector art in Illustrator, the scale should not be a factor.  Set your Illustrator layers to continuously rasterize, and you get too close you like the layers with the camera and they will be always strong.  So you can work on a set of more small scale and not go beyond limitation of 30000 pixels of AE.  Which also means that you will not need to frame-match two environments.

  It seems to me that you are overloading the work.  Personally, I wouldn't combine camera movements and the zoom - the potential that ranged from focal lengths will be upset something is too big.  I would just do everything with the movement of the camera, using the X for movement left-right axis and Z axis to get close or continue to your subjects.  After Effects cameras simulate the way cameras of real world work, so it is best to approach the work as a real-world situation.  Build the world, and then animate the camera moving in this world.

  Don't forget that you can use Precomposed/Nested compositions to greatly simplify your work.  Make a bouquet of 10 or so trees in a model, and then use this nested pre model several times in your main computer.  Don't forget to condense the transformations of the pre comps.

• My wifi continues to try to connect to each router everywhere wherever I travel. She interrupts the cellular data service / until I turn off the wifi.

  I recently reset my network settings. Now, everywhere I go, my wifi (6 more) continues to try to mate with every wifi it crosses. My cellular data cannot connect as he tries (unsuccessfully) to connect, so I have to turn it off to connect to internet. And then, of course, I forgot to turn it back on later when I'm at home, which then uses the data.

  Settings-> WiFi - > ask to join networks

  It has the value if it is then you must disable

• 2000-2d27CL PC laptop: Wifi continues to disconect

  I bought this computer two years ago and it was amazing, that my dog broke it so I replaced it with exactly the same thing a few days ago.  Since then, I tried to stuff that requires internet access.  My computer will be connected sometimes for ten minutes, sometimes to one, but anyway it always disconects and I have manually, go back and try to reconect.  Sometimes it works sometimes it isn't.   I really need to understand why it continues to be and how I can solve this problem.  Help, please.

  Hey, I just thought I should let you know I did call and talk to someone and they were able to help. for all those who may come across this. She told me to uninstall my driver of qualcomm. idid that as soon as you restart your computer, it will reinstall everything on its own. It's a really easy solution for me. but he dropped out again but onl; o when I was updating to windows 8.1. but now, he remains connected for as long I want.  im happy for this mark as resolved.

• My wifi laptop Windows 8 guard out and say that it is "limited".

  I've seen a number of tickets associated with this issue, so in a way I'm glad I'm not the only one.

  I recently bought a new laptop and it came with windows 8 is installed. It is the only device/machine that is struggling to keep a stable internet connection.
  Under power options, I have wifi at maximum performance.
  I tried to adjust my wifi for 'meter' because I heard rumors that would fix everything.
  Also, I tried to update my card wifi drivers. They were already up to date.
  I uninstalled Norton Internet Security and restarted. Still not good.
  It happens on my work and the network.
  It's very annoying. If the cuts internet to every 2-10 minutes, then it is impossible to play a competitive game. I can always just reconnect to the network, but it's awkward to do.

  So the model number is a Samsung, NP680z5e (NP680z5e-x01us)

  I found the problem. There is an another wireless driver update which can be found in the sw update. It is not sound obvious that you need this driver update and if you never open sw update then you will never find the solution. Such a jump big bug.
  In the past I had updated only the drivers through the Device Manager.
  The link you posted does not help. I tried almost everything. I hope this helps someone else. Apparently this model has been ever been tested for more than 10 minutes after everything has been completely assembled out of the factory. There are layers and layers of drivers and settings to regulate your, half-light of map and graphic display. If you miss a layer, then things do behave as expected.

• Animate using rotation and the puppet tool. Continuously rasterize mess it upward.

  In After Effects CC... Trying to animate a vector arms using rotation and the puppet tool. The animation looks good until I hit the button to rasterize continuously on this layer. He then gets distorted and cut out. I need to be continuously rasterized, so it's not pixelated.  Any suggestions on how to solve this would be great.

  In simple terms the effect of pupet pin uses space Composition and an alpha chanel of the first image to distort the pixels on the screen. So if you move or change the position or scale of the pixels after the first image to the assistance of any transformation or the effect, you now moved the original source of the pixels and puppets pin breaks. That's how the effect is designed and it's the only way it works.

  There is only a single correct workflow. Set up a model that is large enough to include all of the image that you want to animate when played back on the scale of 100% or a distance from the unit corresponding to the value of the camera zoom, if you size your layer of pine puppets if used in a comp. 3D IOW exceeds 100 percent in the final model, your computer is not big enough , or in a 3D model, if you want to move the camera at 1/4 the distance of the Zoom value of the camera to the layer of puppet pin your model of puppet PIN must be 4 times bigger.

  Animate the effect of pin puppet

  Bring the composition of spindle of puppets in yoiur main composition and apply other effects, transformations or any other manipulation, you need to perform to achieve your desired results.

  Puppet PIN is designed for this workflow and when used properly it is a very practical tool.

• Feature WiFi of Tecra A11 goes out several times per day

  I have a Tecra A11 S3540 and he began arresting capacity wireless itself. The switch is turned on and I updated all drivers network card.
  What should I do to fix this problem, because it is difficult to work on the laptop!

  This behavior has something to do with food?
  I mean, that arrive with AC power and battery supplies?

• First continuous CC audio drop-outs during playback

  I am a professional editor and I'm at the point plan to switch to another software after you have always had this problem for over a year. Without fault during playback the audio will stop randomly forcing me to stop and resume playback until it does it again and again and again. He has made it impossible to show the work to clients.

  I had this problem on several computers and I am currently using the iMac spec higher available running a Sound Devices USBPre 2 as an interface, so I don't see how this is causing the problem. I work almost primarily with images of the FS7 Sony (XAVC-I), but I also had the same problem with images from other cameras. I have experimented with setting the IO buffer size, but this does not solve the problem. I also make sure to import all the clips correctly using the media browser.

  Is it simply a major bug with first that will force me to change software or anyone has any suggestions as to what could be the problem?

  Known problem for many years, in many versions - as a google search reveals...

  Let me google that for you

  Sorry, this isn't much help but it seems to be (temporarily) fixed by renaming a few relevant records (so first restores his cache) as detailed at the end of https://forums.adobe.com/message/8847998?tstart=0#8847998

  Be thankful, that you don't have to play live on the air!

• Microsoft support is terrible! Here's my rants! bsod problems continues. Anyone has any ideas on where I should go to progress posted?

  This is in reference to post http://social.answers.microsoft.com/Forums/en-US/w7hardware/thread/28318603-4513-48fc-bfce-ed28b18c2b7c

  I wanted to share my experience when I called microsoft. I'm about to return the product, but I want to give it a good try and see if my problems can be fixed. But when I called microsoft, I started wondering why I would never pay $ 200 for it.

  The gentleman, God bless his heart, was a jerk, ha. He was the web looking for a debugging tool when you use the control office and was clicking ads stating "FREE!" Windows debugging tool! 100% FREE! "I immediately grabbed the mouse and close it on him, he didn't like it.

  I've also copied all my mini-decharges to my office for him, so he' have access to them, and he couldn't understand why the notebook showed strange characters, I had to ask him to debugging tool that I had already installed microsoft.

  His idea of troubleshooting was waiting for the blue screen comes up, I had to inform him if it were to happen while it was connected to my pc, sharing the process of the Office would be to stop and he wouldn't be able to see again. He said he could not understand this, he' to be able to see it pop up, I continued to explain that the bsod is a system shutdown, and at the moment it happens, no other system processes are made except a script asking for training of the memory image, then restart command. HE STILL did not understand.

  He went further to disable the system hardware, including my network controller, and then couldn't understand why he couldn't see my office.

  That's all what actually happened and I am amazed by the latter. absolutely in stunned. Beyond that, he basically clicked randomly around an hour, check things again and again, and repeatedly says things like: "ok, I'm clicking on the start now button you see who? "I opened Device Manager now, see who?" so that it sounds like it was actually somewhere with him.

  If you have read so far, I' to really appriciate any advice on what to do here, I just can't get the bsod happen while Runnin' the system mode of Auditor, however in regular use, there are on average twice a day. My other post I linked goes into details, i' to appreciate all the advice. Maybe I should go back to my long live the Penguin sing: P

  The person suggested how to disable the devices in an attempt to try to identify the problem.  I understand your comments, but it's a very valid troubleshooting technique.  Have you tried to run with some of these items off to see if your problem still happens?

  As you mentioned in the other thread, your CPU is Overclocked (2.8 GHz clocked @ 3, 5 GHz).  I mentioned that I suspect that you do not have a stable overclock, or that there is a pilot who is damaging the memory.  You have run across a few steps in this other thread attempts to refine the pilot.  Unfortunately, you won't find anything.  This leaves the overclock as the next thing obvious to look at.

  You should try to run with the auditor and at stock clock speeds to see if you still have this problem.

  If you can provide me with the file number, I can try to keep up with technology directly to share with him one of these comments.

  Thank you
  Mark you want to know if your hardware current & software will work with Windows 7? Click on these links: *Windows 7 Upgrade Advisor * *Windows 7 Compatibility Center*.

• Build 7601 message out of no where

  I received a message from "Build 7601" no real out of nowhere I have a legitimate version of Windows 7 Professional. This computer is an old work computer from a multi-million dollar company, so there is no way the company could get away with an illegitimate operating system. I've had this computer for about a month now, but the computer was made in 2009 and used since then. I fear that this could be a virus, but I'm not entirely sure. I'd appreciate any help!

  your windows is a counterfeit.

  you use a key windows 7 OEM SLP requires a bios compatible windows 7. your bios date 04/09/2009 is earlier than the version of windows 7 and has a bios for Vista.
  you will need to buy a win 7 pro license or revert to the windows, your computer comes with.
  OEM SLP: This key comes pre-installed in Windows, when it comes to the factory. This key is designed to work with the special instructions isn't on the hardware of this manufacturer. Then, when Windows was installed using the OEM SLP (in factory) Windows 7 key leans on the motherboard and he sees special instructions and activates

• Outer join in where clause

  Hi all
  in the following query
  

  select bi.SECURITY_ID, sum(r.UNREALISED_PL) UNREALISED_PL
    from XTR_REVALUATION_DETAILS r, xtr_bond_issues bi
    
  , (select x1.deal_no,x1.deal_subtype, x1.contract_code, min(x1.effective_date) min_date,max(x1.effective_date) max_date                                   
        from xtr_revaluation_details x1 
         where x1.effective_date between to_date(:p_date, 'dd.mm.yyyy') and to_date(:p_end_date, 'dd.mm.yyyy')  
         and x1.PORTFOLIO_CODE = :portfolio
         and x1.deal_type = 'BOND'
         and x1.company_code = :p_fund
         and x1.deal_subtype in ('BUY','SELL')
    group by x1.deal_no,x1.contract_code, x1.deal_subtype) i 
    where r.amount_type='UNREAL'
    and bi.BOND_ISSUE_code = r.contract_code
    AND r.DEAL_TYPE = 'BOND'
    AND r.TRANSACTION_NO=1
    and r.PORTFOLIO_CODE = :portfolio
    and r.company_code = :p_fund
    AND r.PERIOD_TO>TO_DATE(:p_date,'DD.MM.YYYY') 
    AND r.PERIOD_TO<=TO_DATE(:p_end_date,'DD.MM.YYYY')  
    and bi.AUTHORISED = 'Y'
    and r.deal_subtype in ('BUY','SELL')
    and i.deal_no = r.deal_no 
  
    and i.contract_code(+) = r.contract_code
    and i.deal_subtype(+) = r.deal_subtype
    and r.effective_date != decode (r.deal_subtype,'BUY',i.min_date,'SELL',i.max_date)
     
    GROUP BY bi.SECURITY_ID 

  I can't do something like that

  and r.effective_date != (+)decode (r.deal_subtype,'BUY',i.min_date,'SELL',i.max_date)

  How can I filter the query to show me the result in all cases? Connection between r and I should be?
  
  
  Version:

  Oracle9i Enterprise Edition Release 9.2.0.8.0 - Production
  PL/SQL Release 9.2.0.8.0 - Production
  "CORE     9.2.0.8.0     Production"
  TNS for Linux: Version 9.2.0.8.0 - Production
  NLSRTL Version 9.2.0.8.0 - Production

  Thanks in advance,
  Alexander.

  Hello

  I think you can do this with the ansi syntax - I can't test without your structures, but I think it works...

  /* Formatted on 15/09/2011 14:05:12 (QP5 v5.163.1008.3004) */
    SELECT bi.SECURITY_ID, SUM (r.UNREALISED_PL) UNREALISED_PL
      FROM XTR_REVALUATION_DETAILS r
           JOIN xtr_bond_issues bi
              ON (bi.BOND_ISSUE_code = r.contract_code)
           LEFT OUTER JOIN (  SELECT x1.deal_no,
                                     x1.deal_subtype,
                                     x1.contract_code,
                                     MIN (x1.effective_date) min_date,
                                     MAX (x1.effective_date) max_date
                                FROM xtr_revaluation_details x1
                               WHERE x1.effective_date BETWEEN TO_DATE (
                                                                  :p_date,
                                                                  'dd.mm.yyyy')
                                                           AND TO_DATE (
                                                                  :p_end_date,
                                                                  'dd.mm.yyyy')
                                     AND x1.PORTFOLIO_CODE = :portfolio
                                     AND x1.deal_type = 'BOND'
                                     AND x1.company_code = :p_fund
                                     AND x1.deal_subtype IN ('BUY', 'SELL')
                            GROUP BY x1.deal_no,
                                     x1.contract_code,
                                     x1.deal_subtype) i
              ON (    i.deal_no = r.deal_no
                  AND i.contract_code = r.contract_code
                  AND i.deal_subtype = r.deal_subtype
                  AND r.effective_date !=
                         DECODE (r.deal_subtype,
                                 'BUY', i.min_date,
                                 'SELL', i.max_date))
     WHERE     r.amount_type = 'UNREAL'
           AND r.DEAL_TYPE = 'BOND'
           AND r.TRANSACTION_NO = 1
           AND r.PORTFOLIO_CODE = :portfolio
           AND r.company_code = :p_fund
           AND r.PERIOD_TO > TO_DATE (:p_date, 'DD.MM.YYYY')
           AND r.PERIOD_TO <= TO_DATE (:p_end_date, 'DD.MM.YYYY')
           AND bi.AUTHORISED = 'Y'
           AND r.deal_subtype IN ('BUY', 'SELL')
  GROUP BY bi.SECURITY_ID
  

  David