WiFi doesn't have a valid IP configuration for windows 8

Similar Questions

• Windows 8 Wifi doesn't have a valid IP configuration

  Background:
  I've been a happy user of Windows 7.  I did the upgrade of Windows 8 and internet connection seems to work very well for two days. Then, a few days ago Windows made the usual software updates after I shut down my computer.  The next time that I opened it upwards (yesterday), it wouldn't connect to the internet no matter what.  I'm computer savvy so tried all suspects, but to no avail.   I used the troubleshooting tool that came with "WiFi doesn't have a valid IP configuration."    Please don't tell me to turn on/off the router.  Tried that and it doesn't work.  I also tried the following at the command prompt (run as administrator):

  netsh winsock reset catalog (reset winsock entries)

  netsh int ip reset reset.log hit (reset TCP/IP stack).
  

  Then rebooted and still no luck.

  I am inclined to think that there is a compatibility issue, perhaps pilots.   I have a Toshiba Satellite P750.   The main thing is that my computer is now a useless brick and it's cost me money by not being able to get online (for my work).

  Here's my ipconfig/all the information.  I hope that someone can have useful information to resolve this problem once and for all.  My only other option is to go back to Windows 7 (which actually does not work) and avoid Windows 8 until it becomes a relatively bug free and viable operating system. Thanks for your help.

  ipconfig/all the details below
  Microsoft Windows [Version 6.2.9200]
  (c) Microsoft Corporation, 2012. All rights reserved.

  C:\Windows\System32>ipconfig/all

  Windows IP configuration

  Name of the host...: WRS
  Primary Dns suffix...:
  Node... type: hybrid
  Active... IP routing: No.
  Active... proxy WINS: No.

  Local Area Connection wireless LAN adapter * 11:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft Wi - Fi Direct virtual card
  Physical address.... : 06-DE-2B-5E-3D-FF
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes

  Ethernet connection to the Local network card:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  Description...: Realtek PCIe GBE Family Controller
  Physical address.... : B8-70-F4-D6-8B-9D
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes

  WiFi wireless LAN adapter:

  The connection-specific DNS suffix. :
  ... Description: Qualcomm Atheros AR9002WB-1NG wireless network adapter
  Physical address.... : 74-DE-2B-5E-3D-FF
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  Address IPv6 local link...: fe80::c1b0:da1b:beff:2d85% 12 (Preferred)
  Autoconfiguration IPv4 address. . : 169.254.45.133 (Preferred)
  ... Subnet mask: 255.255.0.0.
  ... Default gateway. :
  DHCPv6 IOOKING...: 242540075
  DHCPv6 DUID customer...: 00-01-00-01-16-28-E4-18-74-DE-2B-5E-3D-FF

  DNS servers: fec0:0:0:ffff:1 1%
  FEC0:0:0:FFFF:2 1%
  FEC0:0:0:FFFF:3 1%
  NetBIOS over TCP/IP...: enabled

  Card tunnel Local Area Connection * 19:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Teredo Tunneling Pseudo-Interface
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Tunnel adapter isatap. {7AA3C48C-ECE2-45AE-B872-C6440FB89E60}:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Adapter Microsoft ISATAP #2
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  C:\Windows\System32 >

  This he healed for me:

  I kept having the same problem connecting to the hotel Wi-Fi. No problem at home.
  It may have been a coincidence of timing, but my Internet connection was restored from being "limited" by the following text:

  In Internet explorer, go to tools, Internet options, content, and click Clear SSL State.

  Good luck!

• WiFi doesn't have a valid ip configuration

  I have recently installed windows 8.1 and I was not able to connect to the internet since then. I tried different remedies, I searched on various forums such as using the command prompt, netsh winsock reset catalog and even tried netsh int ip reset reset.log hit , high ipconfig / renew andipconfig/release . But still nothing. I also tried to delete AVG, but still nothing. I'm sure that its also not a router related issue as all the other computers in my home connect to wifi and on top of that, I tried to connect the laptop to different routers and still nothing.

  Hi Ben Hmida,.

  I appreciate the efforts to try to solve the problem. If there is an IP address conflict you might face this problem. You can try to manually assign it the IP address and see if it helps.

  Set the IP address manually.

  1. Right click on the network icon located in the lower right of the screen, and then click Open Network and Sharing Center.
  2. Click change settings card present on the left side of the screen.
  3. In the Properties window for the Ethernet, select Protocol Internet Version 4 (TCP/IPv4) , and then click Properties.
  4. Click the radio button next to use the following IP address.
  5. It will give boxes to enter the IP address, you can type the address, for example, if you have a number of machines begin by setting the IP 192.168.1.100 then go to 192.168.1.101.
  6. The subnet mask has the default value is 255. 255. 255. 0 in most cases.
  7. Copy the default gateway of the network connection details window information.
  8. Copies information from DNS server in the details window - there will probably be two addresses to copy. Refer to the image given below to

  

  9. close all windows and test your internet connection.

  You can also see the steps in the link below.

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows/cant-connect-Internet#1TC=Windows-8

  Write to us at the State of the question. We will help you to come.

• "Ethernet" doesn't have a valid IP configuration!

  Apparently, a lot of people have had this same problem with the pre-release of windows 8. None of these solutions have worked for me. I use the overview of the developer to win 8 and still getting the same problem.

  In fact, the problem is that I can't access the internet via my wired Ethernet interface. I have a Realtek PCIe network card using the version 7.3.522.2009 of the driver in compatibility mode for Windows 8. I tried all the possible drivers available for the card and the problem persists, while the same card works fine with my Windows Vista. I am able to access the internet via my wireless adapter, but not via the Ethernet card. When I troubleshoot the network card it gives me just the error that "Ethernet doesn't have a valid IP configuration".
  The thing is that my network card is not able to automatically acquire an IP address, even if the DHCP client is active and running. I tried to use
  • ipconfig / renew
  • netsh int ip reset c:\resetlog.txt

  and similar things, but none of them worked. I think I tried literally everything possible to operate before posting here. I hope that someone of you can help me. Really looking forward to y. Thank you.

  Mandatory ipconfig/all is given below
  C:\Windows\System32>ipconfig/all

  Windows IP configuration

  Name of the host...: Qutab-PC

  Primary Dns suffix...:

  Node... type: hybrid

  Active... IP routing: No.

  Active... proxy WINS: No.

  ... DNS suffix search list: tontut.fi

  Ethernet Ethernet adapter:

  The connection-specific DNS suffix. :

  Description...: Realtek PCIe FE Family Controller #2

  Physical address.... : 00-00-00-00-00-00

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  Address IPv6 local link...: fe80::e95c:a986:9d:2ba2% 20 (Preferred)

  Autoconfiguration IPv4 address. . : 169.254.43.162 (Preferred)

  ... Subnet mask: 255.255.0.0.

  ... Default gateway. :

  DHCPv6 IOOKING...: 335544320

  DHCPv6 DUID customer...: 00-01-00-01-18-6D-0E-A0-00-24-2C-18-84-39

  DNS servers: fec0:0:0:ffff:1 1%

  FEC0:0:0:FFFF:2 1%

  FEC0:0:0:FFFF:3 1%

  NetBIOS over TCP/IP...: enabled

  Bluetooth network connection Ethernet card:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: Device Bluetooth (personal area network)

  Physical address.... : 00-24-7E-4C-58-26

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  Local Area Connection wireless LAN adapter * 11:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: Microsoft Hosted network virtual card

  Physical address.... : 12-24-2C-18-84-39

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  Wi - Fi wireless LAN adapter:

  The connection-specific DNS suffix. : tontut.fi

  ... Description: Qualcomm Atheros AR5007 802. 11 b / g WiFi adapt

  Physical address.... : 00-24-2C-18-84-39

  Active DHCP...
  . : Yes
  Autoconfiguration enabled...: Yes
  Address IPv6 local link...: fe80::61c7:6041:3469:cce8% 12 (Preferred)
  IPv4 address...: 94.237.67.97 (Preferred)
  ... Subnet mask: 255.255.252.0.
  Lease obtained...: Friday, December 28, 2012 10:01:29
  End of the lease...: Friday, December 28, 2012 14:58:02
  ... Default gateway. : 94.237.64.1.
  DHCP server...: 94.237.0.29
  DHCPv6 IOOKING...: 251667500
  DHCPv6 DUID customer...
  . : 00-01-00-01-18-6D-0E-A0-00-24-2C-18-84-39
  DNS servers...: 94.237.0.27
  94.237.0.26
  NetBIOS over TCP/IP...: enabled
  Tunnel adapter isatap. {EBBD9402-654E-4A1C-898F-33188E1CB182}:
  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft ISATAP adapter
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  Tunnel adapter ISATAP.tontut.fi:
  State of the media...: Media disconnected
  The connection-specific DNS suffix. : tontut.fi
  ... Description: Adapter Microsoft ISATAP #2
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  Card adapt 6TO4 tunnel:
  The connection-specific DNS suffix. : tontut.fi
  ... Description: Microsoft 6to4 card
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  IPv6 address: 2002:5eed:4361:5eed:4361 (Preferred)
  ... Default gateway. : 2002:c058:6301:
  2002:C058:6301:C058:6301
  DNS servers...: 94.237.0.27
  94.237.0.26
  NetBIOS over TCP/IP...: disabled
  Card tunnel Teredo Tunneling Pseudo-Interface:
  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Teredo Tunneling Pseudo-Interface
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  OK guys, I solved the problem! I post here if it helps someone who has a similar problem. I still don't know what was the main problem, but he probably was the pilot.

  So here's what I did to get rid of the problem
  1. Disable all IPv6 traffic (my ISP supports IPv6, so no need to turn it on). A very good link I followed to achieve this--> http://www.techunboxed.com/2012/08/how-to-disable-ipv6-in-windows-8.html
  2. Disable Microsoft Kernel Debug network card, which mysteriously appeared in my device manager. link to follow-> http://answers.microsoft.com/en-us/windows/forum/windows_8-networking/what-is-microsoft-kernel-debug-network-adapter/f72b8408-e4f7-4593-9e18-8cbb3e38a5ad
  3. I noticed that despite the fact that there is no physical address assigned to my NIC (probably a driver problem?), so I assigned a random MAC to my Ethernet interface using a mac generator. Link for the tool--> http://download.cnet.com/Technitium-MAC-Address-Changer/3000-2085_4-10554920.html
  4. Connected to the internet via the Ethernet interface!

  It will be useful.

• "Connecting to LAN" doesn't have a valid IP configuration

  Yesterday I just internet browsing and all of a sudden my connection died. I check on my ethernet connection and he says that he is not identified. I started to get many fixes and I couldn't find one that solves my problem. My ethernet connection was initially a public connection until I changed it to a working connection where it still does not work. I also tried to diagnose the "connect to the Local network' and it comes up with"Connecting to the Local network"doesn't have a valid IP configuration.

  IPconfig:

  No IP address is valid:

  Hello Alan,.

  Thanks for posting your question on the forum of the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  1. you made any hardware or software changes on your computer before the show?
  2. What is the brand and model of your computer?

  Thank you to provide detailed information on the issue and your efforts to resolve.

  This problem may occur because of corrupted or incorrect settings of Internet connection.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  IP address to renew and check. Please follow these steps:

  a. Click Start and type cmd in the start search box.
  b. right click on cmd , and then click run as administrator.
  c. type the following commands in the command prompt and press ENTER after each.

  ipconfig/release
  ipconfig / renew

  If this does not help, use method 2.

  Method 2:
  Reset TCP/IP and check.
  Refer to this article:
  How to reset TCP/IP using the NetShell utility
  http://Support2.Microsoft.com/kb/299357

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• my wireless network connection doesn't have a valid IP configuration

  Hello all I tried all the things after searching the Internet for hours trying to solve this problem.  my computer does not display the available wireless networks.  I tried to renew my IP with ipconfig and it did not work.  I have also reset IP/THC and flush the DNS.  This problem occurred when I tried to change the ip address of my router because it matched my modem so that I could change the security settings.  I was going back to my router ip 192.168.5.1 to correct what I did but I now can not connect to internet at all.  When I go to the command prompt and type ipconfig/all, I get media disconnected with active DHCP and autoconfiguration.  But I also noticed there is no IP listed for IPv4.  If anyone has any ideas on how to solve this problem, it would be greatly appreciated.

  Try to connect by Ethernet cable to your router.
  If this does not work either I suggest that you set your router to the factory settings and to reconfigure him.   I'm not sure what you did, but suspect he touched the routers DHCP service.  Most routers have a built-in reset that you press with a paper clip or similar button and hold for 10 seconds to reset.

• wireless network connection doesn't have a valid IP configuration

  tried to clean boot

  tried the ipconfig output

  netsh int reset

  tried to uninstall the driver

  nothing has worked

  Please help me

  Please download the app > run it > download the output to onedrive file or any other file sharing service http://1drv.ms/1FGQ0lU
  Please enter each of them in a command prompt high after you run the above and save the file

  ipconfig/flushdns

  ipconfig/registerdns

  ipconfig/release

  ipconfig / renew

  NETSH winsock reset catalog

  NETSH int ipv4 reset reset.log

  NETSH int ipv6 reset reset.log

  Output

• I can't print due to the "wireless network connection" doesn't have a valid IP address.

  Cannot print wireless

  I can't print due to the "wireless network connection" doesn't have a valid IP address.  How can I fix this problem myself (an absolute non-techie)?

  Hello

  -Did you change your computer, after which the question began?
  -Check if you are connected to the network?

  The question seems more like a network connection problem. I would like you to do the following.

  Method 1: run the Network Troubleshooter utility and see if the problem persists.

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

   
  Method 2: release and renew the IP (Internet Protocol) address and see if the problem persists.

  has. click Start. Type cmd in the search box and press ENTER.
  b. at the command prompt, type the following command and press ENTER:
  ipconfig/all (there is a space between ipconfig and /)
  The command ipconfig/all command displays for all your network adapters, TCP/IP in Windows settings.
   
  If your IP address of your Local network connection is 0.0.0.0 or 169.x.x.x (where x is a number any), then your computer is not getting an IP address from the router.
  If this is the case, try this:
  ·        enough ipconfig at the command prompt and press ENTER
  ·        ipconfig / renew in the command prompt and press ENTER

  Method 3:

  Network printer problems

  Note: The steps also apply to Windows 7.

• I have a valid product key for Vista Home Pemium. How can I get this drive?

  I have an Acer Aspire 5610 and my hard drive died.  I need to reinstall windows, but have no disk.  I have a valid product key for Vista Home Pemium.  How can I get this drive?  Acer sells not more the disc for this model.

  Hello

  Some manufacturers have more available Vista recovery disks.

  As Acer does not have them, you have to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• Want: My HP 460c & window 10 doesn't have a beautiful color as in window 8.1 driver is faulty

  My HP 460c & window 10 doesn't have a beautiful color as in window 8.1 driver is faulty

  HP please, you have to come with an update of the correct printer driver.

  Yes I tried the other operatring system and found that the would was due to a bad lack of yellow ink cartridge, run the tool clean uo always the same, I'm waiting on a new cartridge to confirm the resolution of the problem.

• Is there a way to get a copy of Windows Media Center 2005 french as I have a valid license key for a version of MC in XP

  Original title: media library

  I have a HP M7330 Media Center with a dead MB machine. Changed the MB & learned, too late, "Mo tattoo" as fact by HP & cannot use the recovery partition to reinstall. I'm looking for a way to get a copy of Windows Media Center 2005 french as I have a valid license key for a version of XP MC, this license does not work with my XP Pro drive & my better half - would like to get this machine in order for the moment.

  Thanks for any help before the machine answers my sledgehammer.

  Luke

  Hello

  Windows XP Media Center is available for OEM only and if you don't have a motherboard the OEM valid, it will not activate.

  The only option would be to get a newer version of Windows if your system supports or get an OEM motherboard (HP) that you can use the recovery on.

  You can see this article if you want to upgrade to Windows 7.

  Upgrade Windows XP to Windows 7

   

  The upgrade to Windows 7: frequently asked questions

• Hi, I have labview 8.6.1 for windows, but I switch to a Mac.

  Hello

  I have labview 8.6.1 for windows, but I go to a Mac desktop PC.  Can I transfer the license to a Mac version?

  Best,

  Eric Berkenpas

  Lead engineer-National Geographic Society

  Hi Eric,.

  The license for LabVIEW for Windows, Mac, and Linux are all separate, so you will not be able to transfer the license from a Windows machine to a Mac computer.

  Thank you

• I have Adobe Suite 5.5 for Windows. I recently changed on a Mac. I can't 5.5 for Mac?

  I have Adobe Suite 5.5 for Windows. I recently changed on a Mac. I can't 5.5 for Mac? I have plugins that I like to keep in their current form.

  Adobe offers 'Cross-notes' only for the current version of the application. See this page for more information: order product. Platform, language swap

• I have creative suite 5.5 for windows, I just brought a mac, how do I install creative suite?

  I have creative suite 5.5 for windows, I just brought a mac, how do I install creative suite?

  brook55 wrote:

  I have creative suite 5.5 for windows, I just brought a mac, how do I install creative suite?

  You can not install CS5.5 Windows on your Mac.

  You need to either buy a new copy of the CS6 for your Mac or join the creative Cloud (and pay monthly fees).

  If you join the cloud, you can then install CS6 (and soon the CC version) on your Mac and Windows for the same fee.

• don't have a valid IP configuration

  Hello

  I can not myself connected in wifi for several week
  quandde met solve the problem ca answers me don't have any valid configuration
  I don't know what to do nor strictly knowing nothing
  Thank you for your answer
  Please select your language from the drop-down menu at the bottom of the page to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find the desired language, support for additional international sites options are by following the link below:
  
  Please get your language in the drop to bottom of the page to post your questions in the language of your choice down. The forum you posted is fr English only. If you can't find the desired language, press the options of additional international destinations can be found by following the link below:
  

  http://support.Microsoft.com/common/international.aspx