WiFi has limited after upgrade to 8.1 windows connectivity

Similar Questions

• After upgrade from Vista to Windows 7 Ultimate home, no problem connecting to the internet when logged as an administrator, but cannot connect to the internet using the standard account. How to fix this?

  After upgrade from Vista to Windows 7 Ultimate home, no problem connecting to the internet when logged in as an administrator,

  but unable to connect to the internet using the standard account.  I have the latest version of the Solution Explorer.

  How to fix this?

  Glad to hear it.

  If the problem is resolved, mark the message as response, then it'll be useful for people with similar/identical problem.

• Pavilion laptop g6 - Wifi problem after upgrade to 8.1 Windows

  KIM

  I have a Pavilion Notebook - C3M29EA #AB7 g6 and upgraded to 8.1 windows yesterday.

  Since then, I was unable to detect my own wifi connection while I am able to detect my neighbours. (Everything worked fine before the update).

  Any suggestions?

  -Same here.

  After an hour of time I will ever come back that I solved the problem.

  (1) go on the internet via the wired LAN port

  2) update drivers for Ralink wifi adapter

  Go: Right click on the wireless network connection icon: properties/Configure/tab Driverr/update driver

  (3) after a minute or two of updateing the PC reports that the driver has been updated

  (4) pull the network cable and turn on WiFi.

  What a pain in the anus,

  Anyway, as I said, corrected!

  Dansda.

• Satellite Z930 - no more Bluetooth after upgrade to 8.1 Windows

  Hello

  After upgrade to Windows 8.1 of the Windows store, I discovered that my Bluetooth printer
  has disappeared. Looking at the wireless settings, no more option to turn on/off Bluetooth.
  How can I return my Bluetooth?

  If you updated the system of Windows 8 Windows 8.1 you must update the drivers too!

  You will find on the page of the Toshiba UE Windows Update 8.1 driver drivers
  There is also a statement of installation containing the installation order.

  1 Intel Wireless display uninstall
  2 uninstall Intel Proset
  3 Realtek Audio Driver uninstall
  Day 4 windows 8.1
  5 TOSHIBA Assist Desktop Upgrade
  6 Intel Display Driver upgrade
  AMD 7 Display Driver upgrade
  8 Intel Rapid Storage Technology driver upgrade
  Update driver Audio Realtek 9
  Update 10 ALPS Pointing Device Driver
  Upgrade of 11 Synaptics Touch Pad Driver
  12 Atheros Wireless LAN Driver upgrade
  13 Intel PROSet/Wireless WiMAX software update
  14 Ericsson 3 G driver upgrade
  TOSHIBA 15 system upgrade driver
  Upgrade of 16 TOSHIBA Service Station
  TOSHIBA 17 function key upgrade
  18 TOSHIBA eco Utility v2 upgrade
  19 TOSHIBA Fingerprint Utility upgrade
  TFPU 20 WBF deleting fingerprints tool upgrade
  21 TOSHIBA PC Health Monitor Upgrade
  22 TOSHIBA VIDEO PLAYER Upgrade
  23 CyberLink MediaShow 6 to upgrade TOSHIBA
  24 TOSHIBA Media Player by TrueLink + Upgrade sMedio
  25 TOSHIBA resolution + plug-in for Windows Media Player upgrade
  26 TOSHIBA HDD Protection upgrade

• Cursor disappeared on my IdeaPad after upgrade to 8.1 Windows

  Recently, I upgraded my Ideapad to 8.1 Windows with my graphics driver as well as another driver.

  After upgrading my pointer disappeared on restart. My mouse pointer appears always as usual at the login screen, but after I login, it disappears. The cursor is still active, so I can still run applications, but the cursor is not visible and it is very frustrating.

  If someone has encountered this problem with their upgrade and if so, would you be able to share something with me?

  Thank you

  Only, I have solved my problem. After upgrade to Windows 8.1, I noticed that the Pen & Touch option was no longer available in my control panel.

  For those of you who own a Wacom tablet, you need to reinstall you Wacom using the CD they provide and that should solve your problem immediately.

  Windows was going to charge me $160 to fix the problem, saying that my computer must be riddeled with the Trojans, which is the reason why my cursor was not show.

• Unable to connect after upgrade to 8.1 Windows

  I also have problems to connect to my computer. I've upgraded to 8.1 windows yesterday and cannot open a session today. I have reset my password and that does not work either.

  Its strange that this site recognize my new password but my computer doesn't work?

  They gave me a website to go on live chat - guess what it does not work or the other. I need a phone number to call to speak to someone.

  You can go to www.microsoft.com/support and choose your problem talking to this Department.

  The reason why the site recognize the new password, but your computer is probably due to your computer, not seen yet synchronized with the online system.  Your computer cannot be connected to the Internet or WiFi, meaning that he had a way to 'know' the new password.

  If you have another administrator level account on your computer, you can go to reset the password.

  If there is no administrator account on the system, you can start safe mode to access the built-in Administrator account.  Since this fail-safe account, you can force - reset your account password.

  1. BLAH, the logon screen, click the Power Options icon, then hold down the SHIFT key while you click the Restart option. Keep now shift until the screen shows it restarts.
  2. On the first screen that appears, select troubleshooting, and then select Advanced Options. Finally, choose the boot settings and click Restart.
  3. On the next screen, press the number 4 to choose Safe Mode.

  Now that you are in safe mode, you can use the backup Administrator account built for perform you a necessary recovery. Built in Administrator account should not be used for any other purpose, or it is not available in such situations when you need it.

  1. On the login screen, click on the arrow icon, and then select the administrator account.
  2. After the Safe Mode boot, press on + W and open the control panel / user accounts.
  3. Select manage another account, and then select the account you want to switch to an administrator account. You can also use the option change password here to reset the password of the other account.

  When finished, restart the computer normally.

• after upgrade to macOS sierra cannot connect to citrix receiver apps

  I use Citrix receiver apps to make my day to day work. The same citrix apps are also accessible via a web browser (Safari) and everything worked fine until the version IE Capitan.

  After upgrade to macOS sierra I can't you connect/launch of citrix apps. I tried with receiver and citrix via web browser as well, but its not connecting.

  Is anyone else facing the same issue or know the fix.

  Earlier, I thought that maybe some problem of connectivity, but after a lot of troubleshooting it still did not work and shows the same error "failed to initialize." (attached image).

  Then clicked on suddenly to mind that I just upgraded my MacBook OS. In order to confirm if his new problem of macOS or anything else, I have installed Windows 10 on vmware fusion and tried to connect to citrix receiver and it worked only! without any operation of additional troubleshooting, it is confirmed that the issue is again macOS.

  So as a temporary workaround, you can use virtual windows OS on top of the operating system Mac OS page sierra to launch citrix applications.

  But apple needs to fix in the Sierra.

  This seems to be, in part, a browser problem.

  Have you tried, since El Capitan or Sierra, another browser?

  And it would move from Citrix to make their applications compatible with OSX.

• No Bluetooth after upgrade to 8.1 Windows - model 1104TX (ENVY m6)

  Hello

  My system is HP Envy m6 1104tx. It came with Windows 8 (64-bit) preinstalled and everything was going well until I chose to upgrade to 8.1 Windows.

  After checking with CompMgmt.msc, I found that I had 3290 RaLink 802.11 Wi - Fi adapter. Just below NICs, I have "Other devices" and under "Bluetooth Controller" with a yellow exclamation mark on the subject. I tried to update the drivers, but it says "Windows failed to install the controller bluetooth"(pas pu trouver pilote logiciel pour votre périphérique). "»

  I've updated almost all possible device drivers, but this 'Bluetooth controller' still shows a yellow exclamation mark on it.

  Also in CompMgmt.msc I can't find "Bluetooth" or "Bluetooth Module" but on the contrary, there is a 'profiles Bluetooth device' and inside this 'Bluetooth Interface Driver profile '. I tried to update, but the result was still once, as mentioned above.

  So, how to solve this? How to make implementing Bluetooth on my m6 desire?

  PS And yes I ran Technical Assistance from HP, but it says everything is fine. And in reality it is not, Bluetooth does not.

  RENJ

  Thanks Makachaka,

  I really appreciate your time and your help. However your suggestion came a little too late.

  I had already solved my problem with Bluetooth using the instructions contained in the following web page:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-hardware/Bluetooth-systemthreadexceptionnothandled-blue/e9e410d4-ef73-40C2-9e4e-b05c5d604c6c?LC=2057&auth=1

  The gap only I took while troubleshooting from the procedure described in the page Microsoft above was that I didn't not apply the patch from Intel Bluetooth. The rest was exactly as described. Problem solved for me.

  @Makachaka: thanks and have a great year!

• Cannot set UEFI after upgrade to 8.1 Windows (P6 HP 2364ea)

  Hello

  I recently bought a HP P6 (Pavilion) 2364ea tower that came with Windows 8 is installed. When buying I could enter the parameters of UEFI at startup by pressing one of the function keys. Now that I have upgraded to 8.1 Windows no splash screen or UEFI settings are available when booting - any function keys I type.

  I tried to reboot to the Windows Advanced Boot-> troubleshoot-> advanced options-> settings for UEFI firmware road but the PC starts just to a white screen with no hard disk activity. I then reboot into Windows 8. The same thing happens if I try to change the windows startup options.

  Any help would be greatly appreciated!

  Thank you

  Gary

  I have now managed to access the UEFI settings using an old VGA monitor to start instead of my screen thanks to a post of dave2009 on another thread. For anyone having the same problem here is his message:

  I hope it will work for you or someone else. I felt the same way - try to access the settings of the PC UEFI firmware and got a screen empty every time. Tried the ridiculous press F10 every second. Nada.

  Fortunately, I came across this post that put me on my solution. It's actually the BIOS could not display on my monitor (s).

  The BIOS has been there all along, but I didn't know it.

  My setup is a HP Envy with Intel HD graphics office built in connected with DVI to HDMI cables to 2 HP w2338h monitors that have a native resolution of 1920 x 1080 or more. Solution? Unplug everything and plug an older monitor CRT HP with a VGA to DVI. Seriously. My new HP desktop cannot display the HP BIOS on my HP flat screens. Now, I'm not going to dig into this but I suspect even just plug one of the flat screens equipped with a VGA connector could do the trick.

  And wa - la. My firmware is not corrupt. I need not do anything crazy. I just needed to downgrade my video connectors in order to see the bios. And, now that I have my graphics card inherited here, I see this cute bootscreen of HP. Previously, black until the windows open. It's a whole new world!

• Windows install-"error 1325 - 'Documents' is not a valid short file name"; After upgrading from Vista to Windows 7, cannot load new software. ____

  After an upgrade from Vista to Windows 7, everything on the system seemed to work properly. up to what I tried to re - install everything deleted software or install new software.  As soon as Windows Installer starts the following error message appears: "error 1325 - 'Documents' is not a valid short file name.

  If this could have something to do with the new pads MSFT security permissions on folders (with padlock) during a upgrade as well as related hidden junctions by compared to the user by the system?

  I tried to install the update system of Lenovo and MSFT Windows Installer Clean Up clean in the hope that the software would help alleviate my problems. See below the link on advice from MSFT on the same error.

  http://support.Microsoft.com/%2Fkb%2F328162

  Unfortunately, I cannot even load the previously recommended THAT MSFT software to solve this error.  I also tried to install the software as 'Run as Administrator' and in 'Safe Mode '.  Even if I could not load the software recommended to MSFT, I was able to install iTunes to Apple through Apple Software Update, I guess, that they do not use Windows Installer.

  With the new structure of junction there is several files or links to the same folder across file system, if it is a folder authorization number which specific files/links are I need to remove restrictions?

  Any help would be appreciated, if not I'll have to do a clean install and individually reinstall each piece of software... Thank you.

  I think I found the solution for this point, because I have just encountered the same problem in our environment and here's what I did to solve it:

  -Create a higher level permissions at the root of the folder redirection (for example \\servername\mydocredirfolder): grant the Group authenticated users the following permissions and apply it to "this folder only" ALLOW: list folders/read data, reading, reading attributes, read extended attributes, create files / add data

  I think the MSI is trying to read the free space on the disk on the server, but it cannot because it tries to access the folder where your my documents redirection is sitting.

  Good luck!

• After upgrading my OEM of Windows 7 to Windows 8 Pro license, can I switch my license of windows 8 to a new pc?

  IF I upgrade my license OEM windows 7 to Windows 8 Pro, can I transfer my windows 8 pro license to new PC?

  If I need to re - install windows I have to install my copy of Windows 7 oem first and then install the upgrade of windows 8?

  I thought that the new license windows 8 would take the place of the old 7 oem?

  Well, it does, but you are moving elsewhere, but you cannot benefit from rights eligible OEM Windows 7 license to another machine, because the OEM for Windows 7 license was already tied to the first machine that it has been installed on.

  The machine that you transfer the Windows 8 license must have a previous qualification license (XP, Vista, Windows 7, or even Windows 7).

  The OEM of Windows 7 versions are identical to the versions commercial full license with the following exception:

  -OEM versions don't offer any free direct support from Microsoft technical support Microsoft

  -OEM Licenses are tied to the computer first you install and activate it on

  -OEM versions allow all hardware upgrades except for an upgrade to a different model motherboard

  -OEM versions does not move directly from an older Windows operating system

  What is OEM software? :
  http://support.Microsoft.com/GP/oemsupport_1/en-GB

  Licensing FAQ:
  http://www.Microsoft.com/OEM/en/licensing/sblicensing/pages/licensing_faq.aspx

• Lenovo Y400 HDD partition after upgrade to 8.1 WIndows

  I upgraded my Lenovo Y400 Windows 8.1, and I noticed that there are 8 partitions on disk 0. Is this normal?

  Otherwise, what partition I could merge/delete/resize without sacrificing the functionality of One (OKR) key recovery?

  

  I want to buy SSD in the near future (probably 128 GB) and want to use it as a system and my existing as data storage HARD drive. It is possible to clone my disk SSD with the always OKR works?

  Thank you very much!

  Here's the original scores, as seen in another way:

  

• creating recovery media after upgrade to 8.1 window

  Hello friends. I have a lot of confusion. I bought a laptop on December 2012 with window 8 preinstalled and created the recovery media about 6 or 7 months later. And now, I upgraded my system to window the window store 8.1. And now again I would create a recovery media for windows 8.1. So my question is if I create recovery media on a flash drive usb and if in the future I want to reset my pc or reinstall my system, I'll make window 8 or 8.1 on my system. I'm not a computer expert. If anyone can help me please. Thank you.

  Hello:

  You will get Windows 8.

  If you want to do a recovery W8.1 image you can do the following...

  You can create a system image in W8.1 and save it on a portable hard drive or set of DVD as you might in W7.

  Instead of making a bootable cd as in W7, you need a boot flash drive boot. You can use a flash drive to very small capacity (256 MB) for the startup recovery W8 flash player.

  Check out these links for more information.

  Create the image of the W8.1 system:

  http://www.hanselman.com/blog/CreateACompleteSystemImageBackupWithWindows81AndFileHistory.aspx

  Create bootable W8.1 flash player to access the system image.  Don't forget, you can use this drive, you can boot from it and access the system image you created on DVD or a portable USB hard drive.

  http://anewdomain.NET/2013/09/13/create-USB-recovery-drive-Windows-8-1/

• PC laptop Envy 15: WiFi keeps falling after upgrade HP Envy 15 laptop for Windows 10

  I asked HP remote support to fix the adapter Intel Dual Band Wireless AC 3160.  They uninstalled and reinstalled the driver to the latest version 18.30.0.9 dated dated 03-11-2015.

  WiFi connection a bit improved, but after a longer period of use, it is back to the previous state of connection loss after running for a few minutes.

  The error showed in troubleshooting is "the wireless works do not.  However the services indicated in the Task Manager are all performed correctly.  Sometimes, it can be retrieved with the troubleshooting procedure, sometimes not.

  HP has the right driver Wireless Windows 10 on the map?  I've exhausted every possibility by ensuring that the driver is up-to-date.  Connection Wi - Fi worked well in point 8.1 of Windows before upgrade.

  I discovered after the application of the "Cumulative Update for Windows 10 Version 1511 for x 64 systems (KB3116900)", dated December 8, 2015, the disconnection of wireless automation problem seems to go away.

  I've been running on continually of the Wi - Fi connection for the last 24 hours on different routers after the * beep * update.  The WIFi connection has not declined.

  It seems that Microsoft has fixed this issue with the version of December to win 10.  If anyone else can check?

  https://support.Microsoft.com/en-us/KB/3116900

• P4G35EA #A #CQ: wifi is lost after upgrade of the system

  My system alerted me to the HP update and after the update was done, my system can no longer connect to my wifi.what is the solution?

  Please help.

  Welcome to the HP Forums!

  If I understand your message that you have a problem with the WiFi on your HP laptop.

  Here is a list of steps that solve common problems with wireless connectivity.

  First of all, we have a step by step guide to guide you through the process of diagnosis here:
  Troubleshooting your wireless network and Internet access

  A second option is to try the following steps:
  Powercycle the network:
  1. turn off your laptop.
  2. unplug the power to your router.
  3. disconnect the power to your modem.
  4. wait at least 45 seconds.
  5 reconnect the modem and wait for it to come back online.
  6 plug in the router and wait for it to come back online.
  7. turn on your laptop and test your connection.

  Turn off the power to the adapter:
  1. open Device Manager. (Win Key + R > type devmgmt.msc > OK)
  2. expand the network adapters.
  3. right click on the Ethernet adapter / wireless, and then click Properties.
  4. click on the power management tab.
  5 remove the check mark next to allow the computer to turn off this device to save power.
  6. click on OK.
  7 test cycle.

  Reset the TCP/IP settings on your PC:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh int ip reset resetlog.txt" without the quotes and press ENTER.
  4 restart your PC and test.

  It can also help to reset the winsock catalog:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh winsock reset" without the quotes, and then press ENTER.
  4 restart your PC and test.

  Reinstall the NIC drivers:
  1. download the drivers from here , but do not run them again.
  2. go to your Start menu/screen and type Device Manager.
  3. expand network adapters.
  4. right click on the wireless adapter and choose uninstall.
  5 install the drivers downloaded in step 1.
  6. restart your PC and test.

  Test an ethernet connection:
  Explicit. Test if the problem persists on a wired connection to the adapter hardware troubleshooting wireless can be directed to the appropriate areas.

  Test another connection:
  Many people excluded their home network as a problem if another device working on the same network. Networking is not as simple as that. Each device interacts differently with your router or modem and it is impossible to exclude the settings for this device until the laptop has been tested on another network.

  If these steps do not resolve the problem, try this document published by Microsoft for network management issues: wired and wireless network problems. You can change the operating system with the drop-down list in the upper right of the document.

  Source

  Please let me know how it works.

  This is a great question other clients may also wonder; Please click the accept as Solution If you think that this message has helped you, or could help others.

  Thank you!