WiFi problem with case

Similar Questions

• WiFi problem with iPad 4 on first generation Airport Express

  Bad problem with iPad 4 / iOS9. It seems that it is connected to the wifi (my old airport express of first-generation lists my iPad as a connected device and in settings of the iPad, the connection has the usual blue tick). BUT Internet works only for a few seconds after a reboot (hard) and there is no icon of wifi signal on the status bar (to keep for the first few seconds after the eboot). All other devices (iPhone 6 on ios8.2, iPad 2, two Macs and a PC) work fine on the airport express (first generation). Stranger still, when I go into a public café with wifi on the road, the iPad 4 connects no problem at the station, on the status bar and the internet works, I see the usual wifi antenna icon. Final oddity, it suddenly stopped working and no software / firmware updates between the two. As mentioned, soft and hard that it recharges don't help in saving a few seconds DNS cannot be a problem because all other devices work correctly.  I also tried to reset the network settings. It is esoteric.

  As a test, temporarily change the wireless network name and password on the AirPort Express.

  Make the name of... well very simple wireless network, no special characters (like an apostrophe) and no space empty. Ditto for the password.

  Can the iPad4 connect that way?

• WiFi problem with Aspire VN7 - 791.

  Hello

  I have a problem with my Acer Aspire VN7-791.

  I reinstalled Windows 8.1 and I have some problems with the wireless card.

  I first tried to install the drivers I found on the Web site, and none of them could do work (the system still did not recognize the wifi card)

  Then I tried to install the driver from the official site and with this one:

  http://www.killernetworking.com/support/driver-downloads/standard-drivers

  The system has detected the wifi card and now I can see the SSID of the network around me.

  But when I tried to connect to my network, I couln t, I have one "can" do not connect to the network. Windows.

  I have a dual boot Linux and it works fine, I see the networks around me and I can connect to mine.

  My wireless card is a "Qualcomm Atheros QCA61x4 Wireless Network Adapter".

  However, I can still use the functionality of network hosted the wifi card, if this information could help.

  Also, for some reason, I can't use the Acer care center, he said that my PC is not supported.

  Thanks in advance for your help and sorry for my bad English.

  Go to control panel, programs and features and uninstall the wifi. Make sure that there is no other wifi of the installed drivers. Restart and install the latest driver for wifi Acer.

  As a last resort, book your personal date and do a cover of the plant.

• Problem with case

  What is the problem with the instruction box below. I have error when running. Can someone help me please. Thank you.
  

  SELECT CRR.ROUTE, CRR.PUBLICATION
   FROM  CIRC.CARRIER_ROUTE CRR, 
                   CIRC_RPT.VW_CARRIER_RATE_DRW VCRD 
                  WHERE CRR.PUBLICATION=VCRD.METHOD_PUB 
                       AND CRR.RATE_CODE=VCRD.RATE_CODE 
                      AND (case when  CRR.ROUTE IN('40011420','40012428') then VCRD.RATE_METHOD ='SBSTD' else VCRD.RATE_METHOD ='SCSTD'  END)

  Varun says:
  What is the problem with the instruction box below. I have error when running. Can someone help me please. Thank you.

  SELECT CRR.ROUTE, CRR.PUBLICATION
  FROM  CIRC.CARRIER_ROUTE CRR,
  CIRC_RPT.VW_CARRIER_RATE_DRW VCRD
  WHERE CRR.PUBLICATION=VCRD.METHOD_PUB
  AND CRR.RATE_CODE=VCRD.RATE_CODE
  AND (case when  CRR.ROUTE IN('40011420','40012428') then VCRD.RATE_METHOD ='SBSTD' else VCRD.RATE_METHOD ='SCSTD'  END)
  

  How can we help if we do not know the error?

  BTW, I find that a bit of discipline on alignment of code allows the readability

  SELECT CRR.ROUTE,
         CRR.PUBLICATION
  FROM CIRC.CARRIER_ROUTE CRR,
       CIRC_RPT.VW_CARRIER_RATE_DRW VCRD
  WHERE CRR.PUBLICATION=VCRD.METHOD_PUB
    AND CRR.RATE_CODE=VCRD.RATE_CODE
    AND (case when  CRR.ROUTE IN('40011420',
                                 '40012428')
              then VCRD.RATE_METHOD ='SBSTD'
              else VCRD.RATE_METHOD ='SCSTD'
         END)
  

  And now that I've lined it up, it sticks out... shouldn't the look of the CASE statement like this:

   AND (case when  CRR.ROUTE IN('40011420',
                                 '40012428')
              then 'SBSTD'
              else 'SCSTD'
         END)
  

  My personal rule is that each item in a list
  -the column names in a SELECT statement
  -a from the table names
  -the conditions in a WHERE clause)
  is listed on a separate line and aligned with the other elements in the list.

  But humans read your code don't care SQL.

• Problem with CASE expressions

  Using Oracle 10 g R2, plsql in SQL Developer (or TOAD). I have a question 'simple' with the criteria 'complicated' in where clause.
  So, it's something like this:
  
  Select the fields in a table
  where stuff like Upper(:CategoryId) | '%'
  and sub_category_id like Upper(:SubCategory). '%'
  and order_date > =: StartDate
  and order_date < =: EndDate
  and division_id =: Division
  
  Up to this point, the query works fine. Here is where is the problem:
  If there is a value in the following parameter field, it works very well, but it is possible that the parameter is null, then I have to test for this first, and if it is empty (or even assigned a 'false' value) then it must restore all settings. The following parameter field is titled: SKU. The reason why I do this first place is to spend several values in a field of single parameter - comma which is great as long as there is some values...
  
  (This works with the above)
  and INSTR (Upper(:SKU), table.sku) > 0
  
  And I have a similar problem with another field in the table entitled: catalogue and as: SKU, it works very well if there is at least one input value.
  
  What I tried (who doesn't) is therefore:
  and as table.sku (BOX WHEN: SKU = '1' AND '%')
  Of OTHER INSTR (Upper(:SKU), table.sku) > 0
  END CASE)
  Same thing with the catalog:
  and as table.catalog (BOX WHEN: catalog = '1' AND '%')
  Of OTHER INSTR (Upper(:Catalog), table.catalog) > 0
  
  There must be a way to make this work. I will be grateful for any suggestions that would help in my situation.

  What is

  select s.sku,
          s.std_cost_ea,
          s.unit_price,
          o.QUANTITY,
          o.order_no,
          o.order_line
  from f21.ffct_offer_product_sku s
  inner join f21.fmkt_order_detail o
         on s.sku = o.sku
         and s.company_id = o.company_id
         and s.division_id = o.division_id
         and s.offer_id = o.offer_id
         and s.offer_year = o.offer_year
  where s.category_id like Upper(:CategoryId) || '%'
  and s.sub_category_id like Upper(:SubCategory) || '%'
  and instr(Upper(nvl(:SKU,s.sku)), s.sku) > 0
  and instr(Upper(nvl(:Offer,s.offer_id), s.offer_id) > 0
  and o.order_date >= :StartDate
  and o.order_date <= :EndDate
  and s.division_id = :Division
  and s.version_no = 0
  

• WIFI problem with router WAG120N

  Hello
  I have a router linksys WAG120N upgrade 1.00.16
  and I have wifi problems that while I use wifi on my laptop or mobile then disconnected wifi (wifi on green router, but I can't connect) until I have restart the router
  Can you help me?
  Please, I beg you!

  It could be the firmware is damaged. Firstly, what you can do is set a channel fix (1, 6, 9 or 11). Customize settings wireless advanced: tag set to 50, interval threshold of Fragmentation 2306 & 2307 RTS threshold. If this does not help, make sure you reflash the firmware, reset the router and reconfigure.

• Satellite Pro A10 - Wifi problem with router ZyXEL

  Hello

  I recently acquired a Satellite Pro A10 (PSA15E - 0115Q - EN) off the coast of the friend. It doesn't have a wireless card installed, but I managed to take of a Lucent MPC13A-20 that was installed without any problem, and it is recognized as a Toshiba Wireless LAN Mini PCI Card. However, despite the computer being able to read my neighbors wifi (next door and in the apartment on the floor), he refuses to acknowledge my router, even if I'm in the same room. My router is a ZyXEL P-660HW-T1 v2 which works very well (I tested it with another laptop).

  Can someone please help!

  Thanks in advance,
  Fred

  Hello!

  Make sure your router is using a WiFi standard that supports your card. If you use 802.11n you should drop down to 802.11 g for the tests.

  In addition, you should check the channel of your wireless network card. It should be the same as the router.

  Good bye

• Satellite M100-126, Wifi problem with Blutooth on Vista activation

  Hello

  Installation of Vista Pro on my M100, I've got blue screen e if active when blutooth Wifi operational.
  No Blutooth problem if you use the Lan and Wifi card down.
  All the drivers have been downloaded from the website of Toshiba (Blutooth drv: 5.10.06 for Vista 32 bit).
  For now, using Wi-Fi with disabled Blutooth.
  Thank you very much for all your comments... :-)

  Alain

  What is the message of the blue screen (it mentions any driver name or device)?

• WiFi problem with router series old netgear wnr?

  my friend has the above router. I can connect but get no data transfer. My Tablet and my friends phones HTC incredible and the droid og work very well.

  We have made general troubleshooting and installed all the updates still same problem complete a connection, but no data. I must point out that my work wifi without flaw in all the other places work home other family friends etc. Any ideas would be appreciated. Thank you

  OK I thought I finally have solved the problem in a simple way. I downloaded WifI farpoc analayer (sp?) in the app store and found a clear channel, then changed the channel auto channel default routers wifi clearer in the House (5 in this case) at the moment I am cruzzing along. Won't be 100% not satisfied until he was at least a few hours, but this is the longest, I've never been able to connect to this router.

• Problem with case when try to alter the query from siimple

  Hello PL/SQL gurus and Experts.
  
  I'm stuck with a question (can be simple), but not gettings all headsway.
  

  select 365/day_num_yr Anul_Fact from Date where date_dt = trunc(sysdate -1) 

  value returns is as - 1.46
  
  need to write it in the form of case (I have to multiply it to some other outer query), I want to store variable ina and then use the same in an outside -.
  but when use the following syntax, then it always returns 0 and not the same output returned by the query above without the scabbard.

  select (case when date_dt =trunc(sysdate -1) then 365/day_num_yr else 0 END) Anul_Fact 

  Help kindly, I appericate your time and effort in advance.

  user555994 wrote:
  Problem is that I do not get the output as 1.46, even the output is coming like the 0 only if using the query - next

  select /*date_dt, sysdate - 1 prev_dt, trunc(sysdate - 1) trunc_prev_dt,*/
  case when date_dt = trunc(sysdate -1) then  365/day_num_yr
  else 0
  end num_day
  from date_dim;
  

  Completely, which seems to be a question of DATA. Have you checked if the table contains data for DATE_DT = SYSDATE - 1? Can you check if the data stored do not have hours and Minutes stored?

  Although I have provided examples of data, which is the same as the data in my main table and once I used the previous solution you provided and then also gives the result as same as those mentioned by you.

  I think it's something like -

  select date_dt, sysdate - 1 prev_dt, trunc(sysdate - 1) trunc_prev_dt,
  case when date_dt = trunc(sysdate -1) then  366/day_num_yr where day_num_yr=(select day_num_yr from date_dim where date_dt = trunc(sysdate -1))
  else 0
  end num_day
  from date_dim;
  

  Once we get the day_num_yr then he deviding by 366/day_num_yr :(
  but he does not like throwing an error ORA-95 - missing keyword

  Yes, it does not work

  -case when date_dt = trunc (sysdate-1) then 366/day_num_yr where day_num_yr = (select day_num_yr from the date_dim where date_dt = trunc (sysdate-1))

  due to a syntax of alien.
  I don't think that you really need. I already said, with the data in your Table, you will be having only * 1 * record with a Non - zero value. Thus, simply apply a filter to extract the corresponding record SYSDATE - 1 and you should get an output which is Non-zero. If you apply a where predicate, then would not need you a CASE statement. You can directly use something like below:

  select date_dt, sysdate - 1 prev_dt, trunc(sysdate - 1) trunc_prev_dt,
         365 / day_num_yr num_day
    from t4
   where date_dt = trunc(sysdate - 1);
  

  Published by: Jen K, September 7, 2012 16:00

• Problem with CASE statements

  Hi all
  
  I have a calculation in a report of Discoverer Desktop with 29 instructions BOX and still 2 case statements more to add. The problem is that my report freezes and fails to run due to the excessive number of case statements. I need to put the 31 statemnts cases in the report, how do I do this? Is there another way to do it without causing the report to freeze?
  
  Below is part of my instructions box just to show you what I'm doing:
  
  CASE WHEN Ex = 'MM' AND THEN of OTHER NULL result (', ')
  CASES WHERE Ex = "PP" AND result IN (40,35,30,25) THEN NULL OTHERWISE
  CASE WHEN Ex = he's ' AND result IN (' a ',' B', 'C', d ') THEN NULL OTHERWISE
  -CASE WHEN Ex = 'IO' AND THEN of OTHER NULL result ('Distinction', 'Merit')
  -CASE WHEN Ex IN ('ZZ', 'WW', 'SS', 'KK') AND ('PASS', 'P') THEN to ANOTHER NULL result...
  
  The last statement should be BOX WHEN... THEN NULL OTHERWISE 1 END END END END...
  
  Help, please. Thank you.

  Hello
  You have reached the limit of characters in a calculation.

  Try to set into a single statement as follows:

  CASE WHEN Ex = 'MM' AND THEN of OTHER NULL result (', ')
  WHEN Ex = "PP" AND as a result (40,35,30,25) THEN NULL OTHERWISE
  WHEN Ex = he's ' AND result IN (' a ',' B', 'C', d ') THEN NULL OTHERWISE
  WHEN Ex = 'IO' AND THEN of OTHER NULL result ('Distinction', 'Merit')
  WHEN Ex IN ('ZZ', 'WW', 'SS', 'KK') AND ('PASS', 'P') THEN to ANOTHER NULL result...

  The last statement should be BOX WHEN... THEN NULL OTHERWISE 1 END

  Another option is to combine all the statements of NULL in a series of gold options like this:

  BOX WHEN
  (Ex = 'MM' AND the result in (', am')) OR
  (Ex = "PP" AND result IN (40,35,30,25)) OR
  (Ex = he's ' AND translated BY (' a ',' B', 'C', ')) OR
  (Ex = 'IO' AND as a result ('Distinction', "according to merit")) OR
  (Ex IN ("ZZ", "WW", "SS", "KK") AND result IN ('PASS', 'P')) THEN ANOTHER NULL...

  Best wishes
  Michael

• WiFi problem with computer hp pavilion G6-2348SG

  Dear friends

  I just got a pavilion hp laptop G6-2348SG, with FreeDod OS and installed my windows and ubuntu on it, but my wifi connection does not work. The key of the keyboard also wireless dosnt work. I tried many drivers and all that but it is still not available. any idea please?

  NOTE: I have wired connection on ubuntu, but on windows I can't even connect to the wired connections.

  Concerning

  Kodjo

  Hello:

  Here is the link for the W7 driver you need:

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & cc = us & prodTypeId = 321957 & prodSeriesId = 5229455 & prodNameId = 5229457 & swEnvOID = 4059 & swLang = 13 & mode = 2 & taskId = 135 & swItem = ob-116957-1

  You can use all the W7 x 64 drivers and software of this model related g6.

  DO NOT USE ANY BIOS OR FIRMWARE FROM THIS LINK FILES

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063 & LC = on & CC = US & DLC = in & sw_lang = & Product = 5278311

• WiFi problem with my dv6 6c19tx

  I recently bought a hp dv6 6c19tx.i pavilion have upgraded its ultimate 64bit.i windows have installed all the drivers available at hp website but my network controller doesnot recoginize my adaptor.my bluetooth and wifi both not work.plz tell me that is used in this laptop, and that the drivers must be installed.
  one thing when installing th drivers gives an error that I have not installed correctly install it again with compatible settngs .i have tried again and again but unable to fix it.plz help me

  Hello:

  This is the latest driver for your PC wireless:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-99392-1&cc=us&DLC=en&LC=en

  I guess that's the bluetooth software you need.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-101178-1&CC=US&DLC=en&LC=en&os=4063&Product=5215558&sw_lang=

  You can try to reinstall W7 Ultimate or if that works simply do not, you will need to order a set of recovery disc for your PC by following the information at the link below >

  http://support.HP.com/us-en/document/c00810334

  Paul

• WIFI problem with all new Satellite C660

  Hello

  I just bought a new Toshiba Satellite C660-108, I found it won t pick up and hold the wireless, I returned to the store and they replaced, but same thing happened.

  It works when I plug on-line.

  Can you please explain exactly what you mean with he won t pick up and hold the wireless?

  Can you use WLAN or not?
  Have you tested with other wireless LANs?
  Have you tried to reboot your router, check the settings and try again?

• WiFi problem with smartwatch 3

  Hello

  I have a sony smartwatch 3 partner to a more x phone. I installed android wear on my phone.

  on my smartwatch 3 when I go in the setting tab, I don't have a wifi entry, I don't understand why.

  In addition some options do not work within the scope of right to left.

  wear android version: 1.4.0.2470307.gms

  the phone system version: oxygen 3.1.3-x, 5.1.1 android

  SmartWatch version: android porter 1.0.1.1537183

  Thanks in advance.

  On your Sony SmartWatch 3

  1 settings
  2. information on phone
  3. software update