WiFi still works

Similar Questions

• Sierra WiFi downloaded to restart ElCapitan OK on Sierra Message can not find material Wi - Fi, that it still works if I returned to ElCapitan?

  Sierra Wireless downloaded ElCapitan OK. Restart on the Sierra.  Message received! Computer can not find the Wi - Fi equipment? It still works if I returned to ElCapitan! Wi - Fi is not compatible, it is possible to access the internet if I use a cable a very long cable that extends the House and stairway access.

  What model Mac Pro?

  Wifi originally came with the Mac Pro?

• Omen of HP 15: Wifi stop working. Win10 shows only a single network and it connects to the WiFi

  Hi guys,.
  Since a few days my wifi stopped working.
  If I click the Wifi icon it shows only a SINGLE NETWORK (two maximum), but not mine!

  

  And I live in a building of 20 + networks, as you can see on the WiFi Analyzer (I'm the only red to the right)
  
  
  
  If I reactive / disable Wifi with fn + f12, it goes back in plane and Wifi mode mode and sees it eventually all networks:
  
  
  
  My Wifi is on top. If it is registered, Windows connects to it and then she abandons the connection; If it is not registered, and I try to connect, it says "you are not able to connect to this network.
  Is fun is that after a few seconds, each network disappears and alone is shown (probably the one next door... I don't know).
  
  I already tried to RESET the laptop MATERIAL by keeping the power button for 10-15 seconds with the laptop is turned off.
  I tried to follow these instructions (http://support.hp.com/us-en/document/c04649175) updated drivers (Intel 18.12.0.3, 18.12.1.2, 18.30.0.9 [10 default Windows], 18.32.0 [last drivers]) without success. Whenever I have install a new driver, I uninstalled the earlier software Wireless + restart.
  
  I tried to uncheked "allow this computer to turn off this device to save power" on my settings of Wifi hardware without success.
  
  HP network support said that I did not choose a Wifi (really? The problem is that I do not see my Wifi on the list!).

  This is unrelated to a new 10 Windows upgrade since I installed it months ago and this is the first time I have this problem :/ It has always worked
  
  I tried different settings too:
  I changed the channel, I put 802.11 g on my router, APSD off on the router.
  I put "Magic off packet, QoS ad hoc off, U-APSD off, fat wide channel, differential flow mode HT off" on the creation of the map without success. Nothing chaned.
  
  The hardware test detects any failure.
  
  Important note: If I close the router, it shows my network connection with full power and he connects to it. Then I come back in my room (probably 3/4 meters away), it MAINTAINS the connection for 30 / 40 min and he drops the connection and I cannot reconnect to it more. It has always worked perfectly in my room during these months (I bought it in March 2015), so the distance is not a problem, I'm 6 / 7 m away from the router.
  In this case, it shows my network (connected) and the nearby... and the other 20 networks +?
  
  The only way I have is USB tethering with my Nexus 5.
  
  Linux: I tried the WiFi on Freya elementary (Ubuntu linux OS base) and it displays 20 + networks available on the list. He has not the connection problem with my Wifi, but sometimes it stops working, Web pages stop loading and I have to restart Wifi to reconnect to the it (usually after 30/40 min of use it).
  
  -------------------------------------------------------------------------------------

  What is the problem? My Wifi card is broken? Should I call Italian support or if you have any suggestions?

  WAWood,
  I took a risk.
  I did a factory restore with recovery HP (I have a drive dedicated for her)... and it worked!
  I had to switch from Win8.1 to 10, but the Wifi problem is solved!
  
  I'm still guessing that was the problem...

  Now, I'm under Intel drivers 18.30.0.9 worm and all the networks work.
  
  In the next few days I'm checking the linux problem (reset deleted primary partition).

• Could not get WiFi to work on E1200

  My 1200 v 1.0 was working fine until I tried to link a wireless internet camera. Apparently I screwed up something in the configuration as I lost my WiFi connection to my laptop and a desktop wireless. Fortunately my wired connection still works. I tried to restore my system as a result of the procedure online, and while the Setup program seems OK is not a link. In the process, I have reset the router to factory affecting several times and have installed the latest version of the firmware. I contacted Linksys support and using telediagnosis, they have reached a point where they said something was wrong with my computer and to study further there will be a fee. I hesitated, because I had tried several different computers with Windows 7 and XP configuration. This dialog box has been severely compromised by my difficulty to understand the dialect of the tech support rep. Any help would be appreciated

  If the internet connection cable works fine with the router, then that is good. Since you're still able to see the network, router broadcasts ok. You have changed the network name or mode of wireless security or wireless security. What you need to do here is to eliminate favorite or saved your portable devices networks networks / wireless so that it prompts you to insert the password wireless. If you have phones or mobile devices, you must choose the network forget.

  Title: profiles of withdrawal or preferred networks wireless network

  Article ID: 23540

• WiFi stop working on my Inspiron 1525 after installing Windows updates

  Updates of Windows installed a few days and wifi, stop working. I uninstalled the windows updates since that day, updated the WLAN driver and even updated my BIOS, and nothing seems to solve the problem. He says I'm on local access only, but when I connect to a modem, I have still no internet to diagnose problems. Any help would be great!

  If possible, try to connect to a different wireless network and see if you continue to have the problem.  If you have other systems that connect to your network that aren't problems check everything their network settings and make sure that there are no differences on your system.

  Try the safe mode with networking, (hold the SHIFT key down while clicking on restart and then choose Safe mode with network) once in failure of Windows to see if you can connect.

  Check power settings, simultaneously press the windows key and x and select Device Manager, look for the wireless card and double click it, choose the power management tab and delete control "allow the computer to turn off this device to save power" and then try to connect.

  Change the power plan to high performance, press the Windows key and the X set button again and choose power options, power management has chosen and select high-performance, plug in the AC adapter and the wireless card test.

  Please reply back with the results and if you can what Windows updates has been downloaded.

  TB

• My Apple apps will still work when I switch to El Capitan?

  First of all, I apologize if it is published in an inappropriate category. I wanted to post in Mac applications, but it has been blocked.

  I have a late 2009 13 "MacBook Pro. I soon will be upgrading in El Capitan (saved on a bootable disc) to Snow Leopard (do a clean install on a new SSD). I know that new versions of Safari, iMovie, Garage Band and Photos comes with El Capitan. But my old applications 2009 as iMovie HD, iDVD and others still work when I upgrade?

  As for iTunes? I just checked it and it says that it is currently at version 11.4.

  Are there apps that I have to buy?

  I mean, I know that many people do not really care pictures from iPhoto. If I don't like a photo, can I just transfer on my current version of iPhoto to my Time Machine backup?

  Thank you for your help.

  You can check the compatibility of your applications and your OS here: http://roaringapps.com/apps

• I just took my ear dryer Flash pods. Also, they went through the complete wash cycle... and they are still working despite an elbow in the thread.

  I have no question... just an observation. I just took my ear dryer Flash pods. Also, they went through a full wash cycle. They still work despite a kinky twist in the wire. So with my test not planned, I find that they are watertight. Thank you Apple.

  I guess you will then test your new iPhone 7?

• The LAN on an Express port still works as a LAN port when in mode "extend the Wi - Fi network"?

  Assuming that the current versions of all units in the airport:

  If you have an extreme as your primary access point, and you have an Express "extend a Wi - Fi network" mode, the LAN on the Express port still works as a LAN port?

  Yes. You can connect any Ethernet device to that port.

• If I move from 10.7.5 to El Capitan all my software still work? Whatever it is will be lost?

  If I move from 10.7.5 to El Capitan all my software still work? Whatever it is will be lost?

  It depends on each application.  A great resource to check the compatibility of each version of the software you use is the following Web site:

  https://roaringapps.com/apps

• I think the evolution of my iMac OSX 10.8.5 El Captan. My old printer Stylus Epson colour 740 still work?

  I think the evolution of my iMac OSX 10.8.5 El Captan. My old printer Stylus Epson colour 740 still work?

  Check the Epson site to see if it is supported.

• Thunderbird will still work if I upgrade my Windows Vista PC to Windows 7?

  Thunderbird is installed and works fine on my Windows Vista PC. If I upgrade the operating system Vista to Windows 7, TBird still works as it is? Can I install a new version of TBird or make other changes to it?

  Good. You can then mark the thread as "Solved" Please?
  Thank you.

• I have now installed this last 37.01 on two computers of desktop PC and both are break much and giving message firefox still works?

  I have now installed this last 37.01 on two computers of desktop PC and both are break much and giving message firefox still works?

  Use "Firefox > output" (Windows: Firefox/file > quit;) Mac: Firefox > quit Firefox. Linux: Firefox/file > exit) to close Firefox if you are currently doing by clicking on the X close in the title bar of Firefox.

• IPhoto (no pictures) will still work with the update of v10.11.6?

  I want to continue to use iPhoto because he has a few features that doesn't have pictures, so I want to make sure that iPhoto will still work if I install this update.

  As long as it is already installed, mine still works (I don't know if an installer would still work). Skip the new Photos app that will be installed if you don't want to use it.

• Can no longer send people text messages without my Macbook iMessage - SMS for them still works on iPhone

  Can't send text messages to people without my Macbook iMessage - SMS for them still works on the iPhone - is there a setting changed it or something wrong with my software apps

  Hello

  For some people, the link between iPhone and Mac for Forwarding text (which works in both directions) can break.

  Things to check: -.

  (1) iPhone and Mac are still on the same LAN

  (2) that the iPhone displays the Mac which should get the sent items

  In case of doubt deletion the Mac in the list.

  Leave the little transfer of text then reset so that the Code number will appear again on the Mac.

  

  19:11 on Friday. July 15, 2016

   iMac 2.5 Ghz i5 2011 (El Capitan)
   G4/1GhzDual MDD (Leopard 10.5.8)
   MacBookPro (Snow Leopard 10.6.8) 2 GB
   Mac OS X (10.6.8).
   iPhone and iPad (2)

• Images are the scale is no longer with (img {max-width: 100% ;}) css from the 34.0.5 in firefox update, it still works fine in IE and chrome.})

  My site was working fine up until firefox updated 34.0.5. Now the images will not scale to fit the box more. I use flexbox so that the site is changing to adapt to the size of the browser. In css, I set img {max-width: 100% ;} and this would make the jpg file size automatically to fit the area they were in, but no more than Mozilla really screwed up this with updated 34.0.5.} My site still works fine with IE and Chrome, but 70% of my web traffic using firefox so I would really like this to work in firefox.
  Any help is greatly appreciated!

  I work by setting a special parameter in CSS for the images that I needed to scale and then I have it referenced by SPAN for each img in HTML, not quite how I wanted it to work since now images filling the box even with monitors really big format, which means that they could now be blurred on a 4 k monitor but firefox left me no choice. Looks like I have going to aid in future chrome like firefox really shit the bed on this 34.0.5 updated