WiFi turns off and then don't come back

Similar Questions

• Time Capsule A1355 no light, no sound? worked this morning now after connecting it, first go-ahead for colid quickly followed by the longest fixed Orange, which turns off and then nothing? He's dead now?

  Time Capsule A1355 no light, no sound? worked this morning now after connecting it, first green light solid, quickly followed by amber is more solid, which turns off and then nothing? I'm not in the airport or if directly connected to the Macbook air utility. It is running the latest firmware, updated 7 days ago and everything was fine until now. Tried both a soft and a hard reset factory but still nothing, but the same brief glow only after restarting each time before going dark again? Any ideas if it can be fixed or if it's as I read elsewhere dead now?

  Thank you

  Any ideas if it can be fixed or if it's as I read elsewhere dead now?

  He died... the fact that the main witness turns off is unusual in this model.

  It is common to the next... A1409 (gen4)

  What happens in the Gen3 is normally a few deaths on the Board... or a bunch of capacitors is low...

  See s/apple-time-capsule-repair/new-issue-with-a1355-gen-3-tc https://sites.google.com/site/lapastenague/a-deconstruction-of-routers-and-modem

  If yours is a very fine introduces Gen3 just before Gen 4, it is possible that the same fix on the Gen 4 could work.

  s/Apple-time-capsule-repair/GEN4-a1409-issues https://sites.google.com/site/lapastenague/a-deconstruction-of-routers-and-modem

  I found early Gen4 may fail as Gen3 but must admit that I am yet to see the Gen3 with welding problems.

  I doubt repair is worth it. The Gen3 is now about 6 years... give or take... This is way beyond the standard lifetime of a TC.

  If you want to play, I'm happy to help you... but I would not spend money on it.

• Whenever I restart Windows 7, I have to turn off and then turn on my network connection get Windows 7 to recognize my wired Internet connection. What is going on?

  I installed Windows 7 Pro on a system newly built using a motherboard Gigabyte Z77x-UD5H, Intel I7 - 3770 K CPU and 32 GB DRAM3, on a SSD OCZ Vertex 3. Everything went well. It is now about three days, since I installed the operating system. I've been adding on software and other general photo editing programs. The Internet would still work. NOW all of a sudden I lost my Internet connection.  Whenever I restart Windows 7, I have to turn off and then turn on my network connection get Windows 7 to recognize my wired Internet connection. What is going on?

  Hello is a network installed by Apple, iTunes more often software Protocol.  If you do not use iTunes * (or other Apple related programs streaming) you don't need.  If you do not use iTunes check if there are any available software updates.

• my Iphone 5 was automatically turned off, and then I couldn't go? What is the problem please help me?

  my Iphone 5 was automatically turned off, and then I couldn't go? What is the problem please help me?

  Have you tried to connect your iPhone to iTunes or the wall charger and let your iPhone for 5-10 minutes to charge its battery?

• WiFi turns off and have to constantly reboot

  WiFi turns off and have to reboot to recover.

  1. Windows version?

  2 mac model/year?

  3 driver Version?

  4 OS X work?

  5 Ethernet?

• Windows Update - it gets to the final stage of the update every time it goes to "Starting Windows" and then it all comes back to the update

  Original title: Windows Update keeps reseting

  My computer had a mandatory update that began when turned on. Happens to the last step of the update every time, it goes to the "starting Windows" and then it all comes back to the update. Turn on the computer and then next turn has not changed anything either, and I can't after that.

  Hi Reilly,

  Thank you for the update on that.

  Please follow the steps in method 1, by our Support Engineer Ganesh Achar B replied on 12 February 2015 on the last response.

  If you are able to start the computer in safe mode, take note of the number of KB updates which fails to install.
   

  Also you can restore the system in safe mode.

  Check out the link below to perform a restore of the system.

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  Warning: System Restore affects file system of Windows, programs and registry settings. It can also make changes to scripts, files, batch and other types of executable files created under any user account on your computer. System Restore does not affect personal files, such as e-mail, documents, or photos, so it cannot help you restore a deleted file. If you have backups of your files, you can restore files from a backup.

  Please answer us with the State to proceed to further troubleshooting.

• My Dell with xp has all the sounds. Sometimes I will leave and then it will come back on. However, not as strong, as it should be. The lights on the speakers are

  My Dell with xp has all the sounds.  Sometimes I will leave and then it will come back on.  However, not as strong, as it should be.  The lights on the speakers are

  Try:

  1. pair an inexpensive connection of headphones in the speaker of your DELL outlet and see if the problem improves.
  2. connect your Dell speakers to another compatible audio device to verify that the speakers are not defective.
  Also visit:
  http://support.Microsoft.com/kb/307918
  Caution:

  Absolutely no warranty express or implied is delivered with this post.  The poster will be held not responsible for any physical, mental, emotional, or financial loss resulting from the use of suggestions or information contained in this message.  Entities who follow the advice in this post are at their own risk.

• I have xp sp3. When I turn on my computer the screen turns off and then the screen is sometimes off shaped.whats evil?

  I have xp sp3. When I turn it on, it lights up and then the screen stopped occasionally. and after that I cut the screen off, then on again, it turns on but the screen is sometimes alittle bit off. who is wrong?

  Hello

  1. don't you make changes to your computer, after which the issue started?

  I suggest that you follow these steps and check to see if they help.

  Step 1:

  Update of your display drivers and check if this is useful.

  Step 2:

  Reinstall your display drivers, and check if that helps.

  http://support.Microsoft.com/kb/283658

• Restarting the computer automatically on its own. You never know how long the computer stays on. Your work and it just turns off and then return.

  I had a problem with my AcerPower F2 Windows XP Professional. You will work and it stops just and restart on it. What could be causing it to do this? A virus? I use this computer a lot for school I hope its something fixable. He has had this problem for at least two days that I am aware. Not sure when its going to do this again, its really hard to get anything done when you don't know how much time you have. This will be repeated this unexpectedly, without warning. It will work for awhile then do it again, back and fourth. I can't put up with this, I hope that someone out there has an idea. Thanks much :-)

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  Here is the Vista Forums.

  See you soon

  Mick Murphy - Microsoft partner

• "No material error installed" and sometimes the Wifi turned off and won't turn back on

  Hello

  I have a 15 2011 "Macbook Pro and recently for a week or 2 it is a. I started having problems with wifi. Wifi seems generally after 5 minutes of connectivity and I need to restart the computer sometimes, it suits it, but other times I get the notorious "no hardware not found" when I click on the wifi icon. It never happened to me before because the wifi worked well. I tried resetting SMC and the PRAM reset and I don't know what to do. One thing I noticed is that the Macbook Pro runs very well on flat surfaces, but when I say use on a pillow or on the bed he falls dead.

  jaymitra95 wrote:

  . One thing I noticed is that the Macbook Pro runs very well on flat surfaces, but when I say use on a pillow or on the bed he falls dead.

  This suggests a bad internal connection.  The best option is an appointment at an Apple store for a FREE genius bar.

  Ciao.

• HP Photosmart premium c310, Windows 7 (64 bit) series will not work afterit is turned off and then on again

  I have photosmart all-in-one c310 printer and whenever we have a power outage, the printer will not print at startup power upward. I have spend hours trying to download drivers or updates and check the printer that says it's fine and the computer that says it can't find the driver. The last 2 times I finally got running again, but I did something different every time and I don't remember what it was. I just spent 2 hours on a hamster wheel keeps back me for a download, after you download it twice, I finally understood was the SAME download (the 3rd time I was directed here) and the printer STILL does not work. I'm pulling my hair out and I'm about to throw this worthless piece of scrap metal by the window. Help!

  Are you connected wireless? If so, you will need to reconnect the printer to the network of the SCW wireless on the printer itself. When you have power, he can hit just the printer off of the network from the router and just reconnect.

• How can I disable a slideshow that continues to play? Apparently, I've not turned off and I don't know how. Output pressing against it.

  Apparently a slide show does not close correctly. I keep getting notified that there was an error with my slide show. I can play another slide show, but the original is apparently still not off. Output pressing does not help. You have any ideas?

  Hello

   
  Are you referring to Windows slide show?
  
  Method 1:
  If you are referring to windows slide show then, you can run the fixit and check.
  http://support.Microsoft.com/mats/windows_photo_and_slideshow_diag/
  
  Method 2:
  You can also perform a clean boot and check:
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the Knowledge Base article.
  
  Please provide us with more information to help you best.

• Why windows xp just turned off and then just restarts, repeatedly?

  Help, please! No apparent reason my pc under xp, everything stops and restarts. WHY?

  There could be several reasons.  Assuming that when she stops seems to be totally random and not caused by a particular program, the most likely cause is overheating.  Download and run ' CoreTemp"which will display your CPU temperature.»  You will see if it's not too hot.  If it turns out that you have a temperature problem, the two most common causes are a CPU fan that has stopped work and excessive dust inside the machine that coats the components and inhibits cooling.   Open your file and get. / clean the dust bunnies.

  Other causes include bad RAM.  While you are there, replace the RAM modules.

  HTH,
  JW

• Computer hangs on reboot must turn off and then restart windows vista 64-bit, how to fix startup log?

  Original title: computer hangs on restrting have to swich to then restart windows vesta 64 bit how to fix startup journal

  Restart the problem have disc windows do not know how to make a boot fix

  Hi John McAvoy,.

  (1) since when are you facing this problem?

  (2) you get an error message?

  I want to clarify if this happens when you start Windows after logging in or before opening a session on windows.

  Method 1: Disconnect all external devices (printers, scanner, USB (universal serial bus) readers, etc...) Except the mouse and keyboard > restart the computer and check

  If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue.  Then get any drivers\software update for the device.
  

  Thanks and greetings

  Ajay K

  Microsoft Answers Support Engineer
  ---------------------------------------------------------------------------------------------------------
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Apple TV light will not turn off and I don't have any service? The lights are still flashing. Tried new battery and still the same problem.

  MY Apple TV light is stuck on and I can not get a service or a screen.

  I would recommend restoring the ATV via iTunes...

  Restore your Apple TV with iTunes - Apple Support