Will be a key Windows Pro 8, work on a setup Windows Pro 8.1?

Similar Questions

• After modification of the material or adding hardware: will be the key to license still work?

  Hello. I have a dvd of Windows XP SP3. I was wondering what material I can add in the machine. Is there a limit? I would keep the motherboard.

  What I know or I was told when I called Microsoft sales at 1-800-426-9400 licenses: when I add/edit I think it's 3 or 4 pieces of hardware - Windows will ask me to re - install XP. I then do the updates again until the most recent date. I have to re - install my malware and programs again, etc. Is there a limit to the additions? Because the rep said the license key is not valid, and I have to call Microsoft to set up again to $10 and the tax. She did her better with me, but maybe thought that I meant an upgrade I'll mention below. My motherboard has 5 hard drives, 3 more hardware pieces at the front, 1 Pcie x 16, 1 Pcie x 1, 2 Pci. In theory: if I added all this stuff here, XP would work or do I have to call Microsoft? Is this considered a reclamation system and my product key will work?

  I asked if there was a limit of CPU?  I was told there are 2 changes: the rep said there is no limit.

  I saw on a website a video explaining how to change your hard drive on a Flash drive. If I change the HARD disk to another HARD disk or drive of Flashhard in my copy of Windows Office work? Another version (Vista or 7)? What if I changed everything, as in my above question/example? This would apply to a laptop? (In the video, it was for a laptop). Or should I contact the manufacturer of my laptop and ask? Can there be a driver problem?

  If I had to install a XP to Vista or a Vista upgrade to Windows 7 upgrade when it's compatible version: should I clean just install the upgrade? Or reinstall the original and then pure install the upgrade? Do I need the original updates to install upgrades? I'm under the impression just do a clean install and its good to go. But: If I've changed some hard-ware with the original OS, has been invited to re - install, validate the copy I have - so should I clean install upgrade? And I can do any hard-ware adds or changes later with the upgrade versions? The representative said no, validation would jump to the top explaining that the key doesn't work anymore.

  If I installed an upgrade to an existing operating system and there was a problem for me to have to re - install the OS upgrade: How can I do this? Woud I first install the original? I have to validate this OS? Then the upgrade? Or just pop in the dvd upgrade and it should install as a full version? The rep told me on the phone that a message saying: I can't use that key, I'll have to call the get that he regenerated for $10 and the tax. What happens if I had to re - install and I used something like Norton Ghost? I can re - apply my disk image?

  If someone had a motherboard with multiple sockets for processors (say two proessors can go there): can they change the processors? One or both? Maybe I've misunderstood this concept well.

  "Brian V V" wrote in message News: 7f167c4f-c0a7-48ae-8 c 61-fd3bf81c26d5...

  So just the product key? with the reactivation...?

  But is there a limit to how much I can add to internal?

  What switch the hard disk of laptop or desktop (in case of failure or a newer more/better).

  In the case of the OEM licenses, the license is valid only on the motherboard original (except in certain circumstances) - almost everything is up for grabs.
  In the case of retail licenses, everything is up for grabs :)
   
  I had a system that I built in 2002. He went through two motherboards, three (or was it 4?) processors, at least 5 hard drives and a variety of expansion cards up to what I finally put to rest a few months ago - I have never had to reinstall except when changing motherboards, due to the incompatibility between chipsets. The reason for which I put to rest was simple - I wanted to change was the case - and the motherboard in the cracking process. I'm saving for a new capable of running Win7 64 bit :)
   
  The laptop that I'm writing this on is due for a new HD - when I'm close to it (he is sitting on the table) - because the old man is too small. I'll just copy the complete installation through a new, plug it in and I'm leaving - at least in theory.
   
  Look here for details on the process of Activation, http://aumha.org/win5/a/wpa.htm , that article was written when XP came out
  but is updated according to the needs.
   
  --

  Noel Paton | Nil Carborundum Illegitemi | CrashFixPC | The lazy three fingers

• My key Windows VistaTM Starter will not work

  My laptop was bought after 3 years... and now I'm fighting through activation problems.

  When it is freshly installed by my uncle (in fact it has just changed), a technician was there to set up our component; He saw my notebook and asked if he wants me to degrade to XP because Vista is slow... since I'm naïve at this point, I just said yes, not knowing that my uncle made a lot of changes to the laptop.
  For about 1 year, I went through different reformat (after degradation 1 time, I asked him to update back); up to 1 times my license key has stopped working. It's a key Windows VistaTM Starter legitimate , I asked some elderly parents w / knowledge to my problem and said it could be that someone stole my key.
  I said 'No' because the key is known only to me and to the technician. I don't know if it uses it or what, but I can't activate it.
  My laptop does not now, and he's going to need someone to fix soon... but here is some information that might help:
  • I have the media recovery disk, all the stuff for Windows Vista and the LG drive (where you can install display, sound drivers etc..).
  • The laptop model is LG RD405.
  I hope someone could help me. PS; the call of my country cost much so I can't take the phone option especially since I have a bit in hearing deficit... and my position is on the Philippines.

  To analyze and solve problems for Activation and Validation, we need to see a full copy of the report produced by the MGADiag tool
  (download and save to the desktop - http://go.microsoft.com/fwlink/?linkid=52012 )
  Once saved, run the tool.
  Click on the button continue, which will produce the report.
  To copy the report in your response, click the button copy in the tool (ignore the error at this stage), and then paste (using r-click and paste or Ctrl + V) in your response.
  -* in your own thread *, please

  Please also state the Version and edition of Windows cited on your COA sticker (if you a) in the case of your machine (or inside the battery compartment), but does NOT quote the key on the sticker!
  http://www.Microsoft.com/en-us/howtotell/hardware.aspx

• SanDisk Extreme USB 3.0 unusable as Windows support install all other key 3.0 USB works

  Hello

  I've explained the problem that is described in detail in the following thread, please read full for understand what is the problem.

  http://www.wincert.NET/forum/topic/11021-SanDisk-Extreme-30-32GB-cant-go-on-at-install-destination/

  In short:

  The problem is in the stage of Windows where you select the partition to install it's unpossible click Next:

  An error message appears that says: cannot find any partition or create an install for... but the hard drive is visible and its also possible to create and delete partitions, so the error message is bull * beep *.

  My thougth is that sandisk stick is detected as disk sata hard and is internally by mistake folders as first hard disk, if I get out the stick at the stage where I select the partition, click Refresh, reconnect the key, other refreshment so I can install on the hard disk.

  What is the problem with your extreme poles? Any other key usb 3.0 works well.

  To pull the stick and so on is just a workaround dirty, I bougth the stick because of the speed!

  Greetz X 23

  Hello

  Nobody talked about windows to go...!

  You didn't read the linked thread right?

  To please you, and then you might think about your answer.

  You will find the most important information on page 3, if you

  don't have the time to read them all.

  EDIT:

  
      dotfusion, on 27 Feb 2013 - 23:21, said:
  
      @x23piracy,
  
      I have searched high and low for more more information ob this odd behavior. But all i can find is either not reliable or solutions such as the one tried. No real reason as to why or what is the problem.
  
      I suspect it has something do to with the way the partition tables are setup on the source media (in this case a san disk usb drive.) I would start there.
  
      amaltom61, on 01 Mar 2013 - 12:41, said:
  
      I had the same problem with a 2.0 8 gb drive. I found a fix on the net, Just create about 150 mb or more of unallocated space in the hdd or ssd you are trying to install windows
  
      Resizing a partition would do the trick but do a full back of the drive just in case
  
      Stimpy, on 01 Mar 2013 - 17:12, said:
  
      Windows setup will run a refresh on the USB bus at the point that you are having problems with.
  
      One way to get around it, is to pull the USB disk out, then put it back in, and go back one step of Windows setup, and try again.  This works in most cases with this error.
  
      bphlpt, on 01 Mar 2013 - 17:15, said:
  
      The questions remains.  Why is this happening with this particular brand/size of USB stick while it is not happening with others, and how to prevent this behavior?
  
      Cheers and Regards
  
      Stimpy, on 01 Mar 2013 - 18:46, said:
  
      It's a good question.  I also own the same drive, and have the same issue with it.
  
      I have a feeling that the controller in the stick is slow at initializing, and is simply not fast enough for Windows Setup.  If you watch the USB stick when Windows is setting up, you can see that it's being initialized, (just before setup asks what drive you want to install Windows on) as my mouse and keyboard also disconnect and reconnect at the same time.
  
      amaltom61, on 02 Mar 2013 - 13:05, said:
  
      Stimpy can be correct. One way i found to solve this problem is to create some unallocated space in the drive(150 mb or more). 
  
       bphlpt, on 04 Mar 2013 - 08:00, said:
  
      Even though you weren't talking about that, I don't know why it wouldn't work.  I've reformatted them before, Fat32 and NTFS.
  
      OK, I went looking for references.  Yes you can do it, but it seems it is not as easy to do as I thought, at least for everyone.  Some folks say the standard built-in Windows 7 tools do it automatically, some say they don't.  I still haven't tried it, since I don't have a USB stick available to partition at the moment.  Some references say that that you need to flip the USB removable bit so that Windows will see the stick as a fixed drive before you can partition it.  I also found  two different tutorials or how to partition a USB stick here and here.  So, yes, one way or another it can be done.
  
      Cheers and Regards
  
      Stimpy, on 04 Mar 2013 - 16:59, said:
  
      Yeah, I have looked in to this a while ago. And found that you cannot partition this USB stick. It needs to be seen by the system as a fixed drive, but for whatever reason, Sandisk are not interested in helping their customers out with this, as it is a simple change to the drives firmware, like you described. There is a rumour going round that Sandisk are going to realease an updated firmware that will make this drive compatible with Windows To Go, and turn it into a fixed disk. I think that's unlikely, but you never know!
  
      Have a look here, it seems Sandisk support simply does not care.
  

  Greetz X 23

• my laptop Compaq Presario C700 work W/vista to 1.1/2 years, seems, I launch my recovery disk 2. I need to know my identical key windows product or need to re-register

  my laptop Compaq Presario C700 work W/vista to 1.1/2 years, seems, I launch my recovery disk 2. I need to know my identical key windows product or need to re-register

  Hello

  Most laptops have the product key on a sticker on the bottom of the machine. If yours is not readable, you should contact Compaq support: http://www.compaq.com/cpq-country/cpq_support.html

  You will not need to register your software. Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• If I'm upgrading to an ssd will be my current windows product key book 7?

  I recently bought a new ssd to speed up my computer. Will the product key supplied with my PC work? Can I still activate?

  Yes, you will need to reactivate by phone as recommend it however:

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

  See also:

  http://techingiteasy.WordPress.com/2012/04/13/how-to-activate-Windows-7-OEM-license-using-a-retail-disc/

• Vodaphone VMB Lite will not install on Windows 8 Pro clean install

  Vodafone Dongle (Huawei K3770) advertising software. NetFramework 3.5 (versions 2 & 3 inc) must be installed via the internet - download 3.5 full version via Windows 7 will not install on Windows 8 Pro - tick Windows 8 Pro add features to install also calls to access the Internet - this own is almost useless without internet access and must be considered incompatible with Vodaphone Dongles and combination of dual-boot.

  The upgrade on Windows 7 H & P (providing 7 is fully updated) works ok but degrades to the operating speed of the Hp Pavilion dv7 3111ea

  Hi, I have activated. NETFramework 3.5 as explained above. The driver of the Vodafone Dongle loaded but when I connect, the PC gives the following error message and reboot: bad_pool_caller

  What can I do?

• Will be upgrading to windows 7 or 8.1 10, change anything on Adobe Photoshop and illustrator CS4 and Adobe 11 pro, which are installed on the computer?

  Will be upgrading to windows 7 or 8.1 10, change anything on Adobe Photoshop and illustrator CS4 and Adobe 11 pro, which are installed on the computer?

  I have Win8.1 and will NEVER switch to Win10 because some older programs simply do not work

  Cloud & Win10 https://helpx.adobe.com/creative-cloud/kb/Windows_10_compatibility_FAQ.html

  -In addition, only CURRENT products will be tested and updated for compatibility with Windows 10

  - so if you have an older program, update you to Windows 10 at YOUR risk of problems

  An idea that MAY work to install or run some programs in Windows 10 old... works for some, not for others

  -http://www.tenforums.com/tutorials/15523-compatibility-mode-settings-apps-change-windows-1 0 - a.html

• If iI better my window 7 window 8, will this affect my Windows 7 product key and how?

  If I upgrade windows 7 to windows 8, will this affect my product key of windows 7 and how?

  If I upgrade windows 7 to windows 8, will this affect my product key of windows 7 and how?

  you get a new product key for Windows 8, if something goes wrong and you need to go back to windows 7, as long as you have the product key for windows 7, you should be fine.

  If can not install windows 8 it will return you to Windows 7 with the windows product key 7

  Robin

• Do I need a product key after that I will be upgrading my Windows 7 Home Basic to Windows 7 Home Premium using Windows Anytime Upgrade?

  I am running Windows 7 Home Basic Edition on Dell Inspiron 660 s and want to update my version of Windows to Windows 7 Home Premium and then to Windows 7 Ultimate using Windows Anytime Upgrade.I'm confused that when I will enter the Windows Anytime Upgrade key, do I need to enter after my Windows product key updated?
  Another question which gives me a voltage, it is that I lose all my data on the hard drive, after that I will be upgrading my Windows?
  Looking forward to your response.

  There is no Windows 7 Home Basic to Windows 7 Ultimate Anytime Upgrade package.

  You have either buy an upgrade level or full version Windows 7 Ultimate retail package and use the product key as well as the Express in Windows 7 Home Edition Upgrade Wizard basic upgrade to Windows 7 Ultimate.

  If you use the upgrade wizard level Express with a touch of detail, your personal files, settings and installed applications will be kept.

• Windows 8 will be out very soon you're working on the update?

  Windows 8 will be out very soon you're working on the update?  I have a lot of problems with windows 7 64 bit. It was so easy at the beginning, but not now. After that I worked on my pages, I can't download it so my site is obsolete. I'm still paying your expenses while I can't update my information, I am considering using oher.

  You don't mention which program you use to work on your pages or how you download, in general terms any problem you have is unlikely to be caused by win7, but most likely your unknown program or your system.

  The upgrade to a different version of the victory, or anything else for that matter, will not cure problems that you might have to less than what you spend to specifically states that in particular a bug has been fixed

• Works Suite 2003 will not install on windows 7. compatibility issue?

  Original title: Works Suite 2003 will not install on windows 7. compatibility issue? If so how to solve it.

  I tried to install Works Suite 2003 on my laptop using Windows 7, 64 bit. He has a problem loading and wants to perform a clean boot. The boot minimal instructions do not apply to windows 7, so how can I get this Microsoft program on this computer running a Microsoft OS?

  Hello

  ·        Which edition of Windows 7 you are using?

  Works Suite 2003 is not compatible with Windows 7. Click on the link below.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&type=software&s=works%20Suite%202003%20&OS=64-bit

  You can try the byAndre.Ziegler suggested in his previous post suggestions, but note that XP mode will only work if you have Windows 7 Professional / Enterprise / ultimate.

  Apart from this, you can install the program in compatibility mode and check if it works or not.

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  See the article mentioned below for the minimum system requirements for the continuation of the work 2003.

  Works Suite 2003: Minimum system requirements for the Installation of Works Suite 2003

  http://support.Microsoft.com/kb/331105

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows key + tab combination stopped working

  I am trying to use the windows key + tab to switch between tab like alt + tab in windows 8. It was working just a couple of days and now it has stopped working for some reason. As far as I know, nothing has changed. I know that the key to windows itself is not broken, because pushing itself brings me to metro and once again back on the desktop. All other windows key combination works, like key windows + I + D + R, everything else tab.

  At least part of the answer is:

  Win + W (search Settings)-> srat typing 'Allow'-> allow switching between these last few Apps-> check App Switching is ON

• When the Samsung Ativ Smart Pc pro device will be updated for windows 8.1?

  I have Samsung Ativ Smart Pc pro device 64 based system XE700T1C-H01SA model number and I want to know when it will be updated for windows 8.1?

  A quick Bing or Google could tell you to October 18.

• When I opened every day Premiere Pro it always says that I should check my account and I will not be able to use the work in a few days...  But I checked ve and my account is fine, all payments have been made. I m afraid that I have not access more in fe

  When I opened every day Premiere Pro it always says that I should check my account and I will not be able to use the work in a few days...  But I checked ve and my account is fine, all payments have been made. I m afraid I won't access more in a few days... What should I do to stay with my access?

  Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud

  -Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

  -https://helpx.adobe.com/creative-cloud/help/sign-in-out-activate-apps.html

  -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  -https://helpx.adobe.com/x-productkb/policy-pricing/activate-deactivate-products.html