will be HP Officejet 6500 a more e-fax to

Similar Questions

• OfficeJet 6500 has more - black print cartridge will not print - other colors will be printed

  OfficeJet 6500 has more the black cartridge will not print.  I put in a new cartridge, so it is there

  ink.  The printer works, because the other colors of printing.  It worked very well and when

  printing, black has slowed and now does not work.

  I called technical support.  Megan has been very helpful to me through the steps to

  clean the print head.  Unfortunately, the black cartridge still does not print.  I have

  has ordered a new printer, the 6700.  I appreciate the help of Megan and will be happy to

  have a new printer.

• HP Officejet 6500 a more impossible to connect to the server

  My HP Officejet 6500 a more printer was connected to my wireless network and was attached to the ePrint service; and I had an email address to send prints to my printer. But today, when I go to the ePrint, it shows that my printer is NOT connected to the SERVER!

  He invites me to go to the Setup menu option / Services Web Setup / email address Panel on the printer display. And, when I do that, it shows me: "you can connect the printer to the itenrnet through a proxy server and touch the ENTER PROXY button! I do not know what Proxy Server, he is asked? And when I get soemthing, it then asks a PORT number! Still, I don't know what is the Port! My printer is still connected to my home wireless network.

  Then I went back to HP ePrintCenter page and REMOVED my printer and then tried to ADD a printer, but, now, he asks me to "enter the printing Code.

  When I tried to enter the print code I had on the file, it says that the code was not valid; the codes are ONLY good for 24 hours, and I have to get a new printing code to return to the configuration of the printer menu steps described above!

  Looks like I'm stuck in a vicious circle.

  I would appreciate your help. Thank you.

  To correct the unable to connect to a web server error. I'd start by power cycling the router and the printer. If still we get the error that I will then try to put a static DNS server built-in web printer (EWS).

  To power cycle the router:

  1. unplug the router (most do not have a power button) and then put
  the printer off using the power button
  2. wait 30 seconds
  3 plug in the router, wait until it is completely upward and the operation.
  4 turn on printer
  5. after the printer is completely top and operational reattempt to connect to web services

  If after that, you still get the error message, I had put the static DNS. To do this:
  1 get the IP address of the printer, and then make a browser (IE, Chrome, any browser you want) and enter
  IP address of the printer in the address bar. This will bring up the SEWS
  2. search for the network titled tab and click on it
  3. then click on IPv4 in the left column, wired / wireless depend on the connection, if connected by Ethernet
  Choose wired, wireless select wireless
  4. when loading this page watch the second part entitled 'Configuration of the DNS addresses' change this radio
  Manual button and change the DNS preferred manual to 8.8.8.8 and manual to auxiliary DNS
  8.8.4.4 and then click on apply.
  5. pay particular attention the following screen which appears this message usually is a way to undo changes only
  made by clicking on the OK"" button. Avoid this by clicking another tab
  or just leave it until you close it.
  6 turn the printer of the cycle and then turn it back on
  7. once the printer is back on and retry operation, activate web
  services and reprint information page so that you can get a new code and add your printer back to ePrint Center. You will need to create a new e-mail address for the printer.

• Why my hp officejet 6500 has more printer take ten minutes to four pages of fax?

  HP Officejet 6500 a Pus E710n-z series

  Windows 7

  Why my hp officejet 6500 has more printer take ten minutes to four pages of fax? No change has been made and no error message. This seems to be an extremely long time for only four pages!

  Firmware has been day t0 then did a hard reset and tested a fax. seems to be faster, but was not a very detailed page. will be able to say when I have more pages to send. If this is no better at this moment, will post back.

• How to print from my ipad to the officejet 6500 has more?

  I read that there may be something else than necessary. I want to print directly to the Officejet 6500 has more. Apple said ths is an Air Print printer able to do this. I don't take this monster out of the box until I know he will do what I want without a lot of trouble. Thank you.

  OK, so you were talking about requiring the update.  It is difficult to say that all depends on if it came with the new firmware or not.  It is not really relevant, however, because it will be updated as soon as Web Services.  This process takes a few minutes.  There is no computer necessary for the update of the firmware as long as the printer has internet access (which is directly connected to a router via ethernet or wireless).  Yes, a connection ad hoc, you will be able to print from the iPad, but you can use its 3 G connection instead of through your router.  It can only support a single WiFi also.  Go ahead and set up the printer and keep me posted on what happens.

  BTW - what is the problem with your PC that it cannot access the internet?

• How to set default COPY for HP Officejet 6500 has more quality DRAFT?

  How can I set default COPY quality to the PROJECT for HP Officejet 6500 has more?

  Hello

  Press on copy on the front panel of the printer, then press the settings button.

  Quality faucet and quick selection / project.

  Press on set as the new default settings, and then click Yes to confirm the changes.

  Later draft quality will be used for the copy unless any other quality is selected.

  Kind regards

  Shlomi

• HP officejet 6500 has more: press the button doesn't work is not on the right side

  Hi I tried to turn on my printer and it is stuck on maintenance mode and will not work my right from the touch pad is there a replacement for the touchpad or a way around the mainenance mode?

  Hello @jgrier1,

  Welcome to the forums of HP.

  I understand that your printer is stuck on maintenance mode and the touchpad is not responding.

  I would like to help.

  I'm sorry, but the display on the Officejet 6500 has more, is not a replaceable part by the user.

  Try to go through the document next to the touch screen.

  It also can you go beyond the question of maintenance mode.

  The touch screen is unresponsive

• HP officejet 6500 has more poster "original jam". There are no jams, how do I clear the message?

  HP Officejet 6500 has more poster "original jam.  Clear the jam, and then press 'OK' to continue. "There is no paper jam and the printer will print as long you don't try to use the automatic charger.  However, the error message continues interfering with scanning and other print jobs.  Any ideas on how to clear the error message?  I tried to reset, nothing helps.

  Thank you.

  Hello HPAllinOneSande,

  Perhaps there is a jam that is located somewhere on the printer. See if you can follow these steps to clean the error and the jam.

  ' Original jam: clear jam and press OK "Message displays on the all-in-one

• HP Officejet 6500 has more by using a different IP address than before

  I have a HP Officejet 6500 has more. Until yesterday, the printer worked wirelessly with my Mac OS 10.6.8 using the same IP address in IPv4 as the computer. I ran the HP Network Config page and it shows an IP address different today that it did. Is the message that I get when I send a document to print wireless: network host 192.168.1.101 is busy try again in 10 seconds.

  I checked the IP address of the printer and it is 192.168.1.100 (not 101). Therefore, they do not speak with each other. I treated all the solutions that I can find on the HP network to see if I can get the two survey periods to match and nothing seems to work. I turned off, turn off router, off modem, printer is off, turned off computer and lit them all back. No help.

  Any suggestions? Can I print using USB, but it's embarrassing.

  Something doesn't look good - maybe that I misunderstood... You say above, your computer and your printer had the same IPaddress and, when this is the case, you were able to print. Now, the printer and the computer have different IP addresses and now, you are not able to print. If this summary is correct, that then it seems to me that it should be exactly the reverse.

  If the IP addresses were the same, there is a conflict between devices, a bit like a mailman trying to deliver mail to two different locations which have the same addresses... What place receives the mail? It is normal for all network devices have their own unique IP address - how each device gets its own mail... or data packets.

  From the sounds of things, your printer is 100 but the MAC OS think its 101. Therefore, the print job is sent to 101 and never happens at the printer. You have two options... tell the OS that the printer is located at 192.168.1.100 or that, to avoid this problem in the future, on the IP address of the printer a static address, just guessing anything below 100, as 192.168.1.50 and then specify the operating system that the printer is located to 192.168.1.50.

  To make the choice of the latter, you must use your internet browser (Safari) and navigate to the 192.168.1.100 address. There is a web interface for your printer. Look for the network settings, then you can change the way that the IP address is obtained from dynamic (DHCP) static. And, after that, you need to find the IP of 192.168.1.50. It is also important to complete the subnet mask that will be 255.255.255.0. Finally, if your printer includes "web applications", you should also check the DNS addresses. You can use: 8.8.8.8 and 8.8.4.4 (Google's DNS servers) or 208.67.222.222 and 208.67.220.220 (OpenDNS servers)

  Note that when you save / apply the changes, you will lose your connection to the webinterface of the printer as the printer will have a new address. To return to the printer web interface, access the new static IP address.

  As far as to say where actually the MAC OS printer, the simplest option, as appropriate, is to use the HP tool to add a network printer or a device. To do this, AFTER you change the IP address. The HP software will scan the network printer and it should give you a result that shows the printer to the new static IP address. Installing and if possible, the name of the printer with a few references of "static HP or the"HPat192.168.1.50"set as default printer and remove the old definition of HP printer.

  The other option to speak the printer MAC must use Add a printer via system preferences > printer/Fax. I'm fairly certain that the MAC tools can analyze the LAN... in any case, it will be a more complicated procedure. Better for a user MAC more warned give assistance if you go this route.

  Hope this helps

• OfficeJet 6500 has more fax keyboard disabled

  Hello experts,

  I have a printer officejet 6500 has more, and I have questions sometimes when you send a fax.

  In some cases, after dialing the phone number of receiver, automatic voice ask redirect the fax to a number given (eg. "dial 26 Fax").

  Anyway, the keypad of the printer is disabled after dialing the phone number and I can not send the fax. How can I activate the keyboard when calling the digit numbers requested by automatic voice?

  Hi there ofblack, welcome to the forums

  I saw your post on the fax concern you have. First of all, I suggest you to check on the Page. 48 of the User Guide , which is to monitor dial to see if this information will help you. As long as you enter the numbers fast enough, the fax needs to work with the numbering screen, otherwise, you will need to use the phone to enter all the guests under send a fax manually from a phone.

  This guide is the standard troubleshooting for fax so that might help: I can't send or receive faxes

  Have a great Thursday

• Apple Airprint for HP Officejet 6500 has more via a wired connection to the router

  Hello

  So I did a considerable amount of research in this through the internet and this forum and I still struggle to find a satisfactory solution.

  I have a HP Officejet 6500 a more connected by ethernet to my BT Homehub 3.

  It is I understand that even if there is a wired connection, as long as my iOS device (iPad 2 or iPhone 5) is connected to the same router, I should still be able to see this Officejet thanks to ease of airprint.

  Unfortunately, this is not the case. I get the message "No Airprint Printers Found" on both devices. The only way I managed to get my Mac Pro (Mavericks) to connect has been add to mannualy by using the IP address of the printer.

  Can anyone provide guidance on what I might hurt? Certainly, the printer must connect internet I can print from my iOS devices using HP ePrint app for iOS.

  Some might say, well, what's the problem, just use the HP application, but is not the point. I think that if something has been set up to make things easier, then use it. I chose this printer specifically for this feature is a bit frustrating for her so difficult to get the desired results.

  Hope it is something simple and anyone can help you.

  Thank you

  Steve

  Following this request and reading the many more similar questions, I think I may have solved this.

  I'm not 100% sure but I read a few threads suggests that there are issues around BT Homehub 3 and Hello so this can be a problem.

  I tried the following in the past two days...

  (1) completely don't reset my router (wiped all settings and started)-no luck!

  (2) I tried changing to WPA2 to just WPA security - no luck!

  (3) tried to convey the Hello to the printer ports - no luck!

  (4) turn off the router, printer and all the devices iOS then fed back router, printer, then iOS devices - printer appears on iOS devices, but when printing was selected iOS device returned on several occasions not connected printer error.

  Finally, what seems to have made (at least for now) has been...

  (1) disconnected the Officejet ethernet and set up as wireless.

  (2) off voltage router, printer and all iOS devices then propelled upward in the order listed previously.

  (3) so far, I tried to print a mail and a web page of my iOS devices, and both have been successful.

  By the way I've been struggling also to airplay from my iPhone / iPad until I started messing around with the settings above, and now this question also seems to be resolved.

  Due to the variety of combinations (different printers, routers, etc.) people will have, it seems to be quite difficult to find a solution that solves a single problem but I hope some of my experiences and findings could help others in some way.

• HP Officejet 6500 has more EZ710nz

  I have a HP Officejet 6500 a more printer connected via the connecting cable from printer to my new laptop, in Windows 7 Home Premium.  This printer takes very, very long to "warm up" (2-3 minutes) and, in doing so, made a lot of noise. The sounds of noise like something spinning and moving inside and is pretty loud.

  I checked all the ink cartridges, etc., and everything works fine and seems to be in order.  Does anyone know if this LONG heating period and the NOISE that accompanies it is normal?

  The noise is normal and is the maintenance printer printheads to ensure that they will not be blocked when printing. See here for more information.

  To minimise this, do not remove the power of the printer, it should be plugged into a live outlet.  You can leave the printer turned on (it will automatically enter a low-power state when the don't print not) or turn off the power button on the printer.

• Problem with Officejet 6500 has more wireless on my Mac running Lion

  I just got the Officejet 6500 has more. I was able to make it work with my HP PC Windows XP (would not work with the radio, but it's probably a problem with this computer - connected very well with USB). But I don't see the option to add it on my Mac (main computer) running OS Lion. I'm completely updated on Mac software. I see my other printer as usual (also a HP) on Mac.

  Tried to reboot several times. I looked on the HP site to various articles and it seems that I might need to make an update of the firmware on the printer, but when I downloaded the software (on the PC), my printer is gray and so wouldn't let me - or does not need the upgrade. Then. I can't see the printer on the Mac and don't know what else to do. Ideas? Thank you... Is the printer on my wireless network - I can not see the IP address and others.

  I don't really know exactly what I did - added to the printer with its IP address and manually the software (added name - I also had a HP update tonight for the printer software, but that only did nothing), then printing I tried and it still would not work.  I used the adjusted IP address, which I found on the dashboard of Verizon. And for some reason, once I put that in manually on the printer, it remained there, even when in desperation I tried to put it back the "detect network" setting. Sorry - but this is not quite logical or in the order.

  Also, I restarted the router, then the printer. Somewhere among all the things I tried, to my amazement, it finally worked! At first, I saw the IP address as the name of the printer (which I had entered it), and then he asked to be changed to the actual model. I did it and it now seems to work. Here, I could tell exactly what I did, but perhaps in what I wrote, you will get a glow and know WHY it worked?

  I wanted to thank you again for all the time you spent to try and help me get this working. It is really really REALLY appreciated and I definitely click the congratulations for you! Thank you very much!

• Win7 x 64 install an Officejet 6500 has MORE. Cannot print

  Win7 x 64 install an Officejet 6500 has MORE. Printer is connected to the wireless very well. Win7 x 64 computer can ping and see the printer on the network.

  Get a message error everytime I try to print saying: "it cannot connect to the printer.

  Same computer can connect to the printer and to view and modify settings wireless very well.

  I guess it's a problem with Win7 x 64. I need to fix this before to decide to take back to Costco and exchange for the Canon I almost branch instead. HP you have always had driver problems, but still? Really!

  Has taken over the crappy HP. Picked up a Canon PIXMA MX882 instead. Impeccable installation, in 10 min I'm printing, scanning, fax wireless with not a single question.

  I am VERY disappointed with HP and its incompatibility with Win7 x 64 drivers. Don't advertise your crap software is compatible, when it is not! I lost hours of my personal time, trying to get HP to work then most of time taking the piece of crap back (I really like the hardware of the printer - software "guys really?"). I will never buy another HP printer. And on the Canon Wireless Setup was easier. A button called easy set up on top of the printer and BAM done. * beep * HP, * beep * indeed.

• OfficeJet 6500 a more connected to the MacBook is not found by the HP utility, although it prints

  I recently upgraded to a Photosmart C5280 All-in-one to an Officejet 6500 has more for use with my MacBook.  The installation process was much more difficult that it should have been, particularly wireless configuration stage (the input field to get the WEP code was not active).  Since the installation of the printer that I use a USB connection to print and scan - I prefer to print using a wireless connection, but this feature seems to not work, even if the onboard display indicates that the printer has connected successfully to our local wireless network.

  I installed the widget dashboard and it detects the levels ink correctly, but when I click on the button of the device to maintain on the widget the HP utility warns me that it is unable to detect the printer, even if the printer is offline, and I can print them out and scan using the USB connection.

  I am also unable to print double-sided, which is an important feature, I want to be able to use.  No double sided button "print" or the checkbox appears in the print menu with all the applications that I usually use (for example: Adobe Acrobat, MS Word, MS Excel, MS PowerPoint).

  OK, OK - progress!

  We will restore the print system:

  -Sys Prefs, Print & Fax
  -Right (control) click inside the box that lists your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign + to add again. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.