HP Officejet 6500 a more impossible to connect to the server

Similar Questions

• HP Officejet 6500 has plus: HP Officejet 6500 a more impossible to connect to the server

  My printer can detect my wireless network, but does not connect to it. Problem started with my MAC a few months ago, but he persists even with my new HP laptop.

  I thought I could have network problems, so upgrade my router (Linkys at Linkys))... still problem. Comcast upgraded my router (Linkys multifunction ARRIS) again and the problem persists.

  I tried cycling power offshore for the router and the printer.

  Even my scanner picks up signals from the printer. I don't know where's the disconnect?

  Help, please

  @mikkiglanvill

  Printer:

  HP Officejet 6500 a Plus e-All-in-One - E710n

  A few ideas

  If you have not done for awhile, you may download and install a new copy of the software full functionality.  Reference: install the full features software - printer

  If the printer is located where you can do so, you could try a wired connection to the router.

  You could try the printer of the assign a static IP address.

  Make sure that there is at least 1 meter / 3 feet between the printer and all wireless devices you want to connect.  Too much is as bad as too far away...

  Paw through all ideas / suggestions / information in the exceptional User Guide of this printer - network setup Section starting on Page 222.

  Try to use as not only a static IP address, but also a hard to connect to your ISP DNS information.

  Mount the power wireless on your receiving devices (PC)

  Help:

  Printer keeps no connection Wi - Fi

  Set the SSID printer

  Parameters to improve wireless connectivity

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  My answer-click accept as Solution to help others find answers.

• HP Officejet Pro 8600 Premium ceased to connect to the server to download applications

  After working perfectly for a few months, my printer is now "impossible to connect to the server" when I ask a crossword every day.  The printer receives and displays messages to my address eprint, and seems to work in all other means except Webscan.  I had to do a restore disc condition as supplied and a full restore of a backup complete recently, but downloading applications worked fine after that.  I have re-installed the software of the printer and all the cheques I seems good.  Any tips on what I should check or do?

  jerryq wrote:

  Same problem here. I have managed to disable the app function in the settings of the printer, but cannot access the settings of the application. Can we assume that this gadget is no longer supported by HP? It would be quite OK (noone really need), but then it should be an update of the firmware with the menu point deleted.

  -jerry

  @jerryq

  I could solve the problem by selecting "Delete of Web Services" in the printer.  This erases all your settings in hpconnected.com, so you will have to set up the printer again.  A bit tedious, but mine works again!

  When you select this option (located by touching the icon top left of the page 'Web Services' above 'Copy', then the 'Settings' button down), it resets the printer and display a new sheet "printer installation Instructions Important".  Take this sheet, because there the "request Code", you will need to add the printer to your existing hpconnected.com account!

  Log on to your account to hpconnected, and then press the devices tab.  Click on the button 'add a device '.  Enter the code to request the instruction sheet, and you should show active again.  The claim code is also the new email address for the printer, you can now change what anyone available.  Unfortunately, the e-mail address you were using previously is now unavailable, but you can simply add a single digit to make it familiar - i.e. "[email protected]" can be "[email protected]".

  Back in the printer and press the icon "Applications".  If all goes well, the apps should load up.  With mine, I had to turn off the power, unplug for 30 seconds, then turn it back on.  Tapping the Apps icon then (finally!) connected to the servers and all the applications reappeared!

  WyreNut

• photosmart HP b210a more does not connect to the server.

  I installed this new printer a few days ago and it works wireless laptop problem, phone and pad. So now all of a sudden I can't print wireless. The printer says does not connect to the server if the wireless works. The wireless working on my computer too. Repeatedly, I installed the installer hp for Lion, I installed the drivers from HP on the Apple site.

  Technical specification:

  iMac running Lion

  Mac Book under Snow Leopard

  iPad

  iPhone 3 g

  AT & T Uverse router

  Thanks to anyone who can help!

  The router rebooted, reinstalled again and it seems to work? Don't know what went wrong.

• BlackBerry Smartphones is no longer receive e-mail... impossible to connect to the server to update my password

  I have a Curve 8520.

  Carrier Movistar

  I received an email telling me that I had to update my password of my email that I was no receiving email any longer... I can't connect to the server to do this...

  Please help I need it for work

  Hello EmmaG3845

  Welcome to the Forums of the BlackBerry Support

  Leave a PC browser trying to access the e-mail account if necessary change your password for this e-mail account, restart your device, and then try to update this e-mail account on your device.

• OfficeJet 6500 has more - impossible to activate Web Services

  Any help would be appriated on this: I tried Google trawling without result!

  I'm trying to enable Web services on my printer to use apps, ePrint Airprint, e.t.c. When I press the setup of Web Services, I agree to the terms and instantly taking me to a product update checking. The display shows then 'no product updates available for this printer' with only 'OK' button to press, when I do I picked the terms and conditions. I am stuck in a permanent loop! All other services (printing, scanning) work very well and the printer is certainly connected to the internet.

  I tried:

  -Restore default settings

  -Turn off the router and the printer.

  -Modification of the DNS settings for the printer.

  Any other suggestions - I'm getting really frustrated now so would appreciate any ideas!

  Hello

  First of all, thanks for all the help when trying to get Web services facing up and running, it is appreciated. I tried partial reset without success, then decided to have another look at the firmware.

  It turns out that I had an older version of the firmware, but I couldn't access the Web services to upgrade, and when I tried to do it via the USB port, he told me that the new firmware will not apply. After a little searching around, I found this thread:

  http://h30434.www3.HP.com/T5/printer-all-in-one-install-Setup/can-t-upgrade-firmware-OfficeJet-6500a-plus/TD-p/874523/page/4

  After a bit of change the .ini settings, I managed to upgrade and, after a week of trying, finally managed to activate Web services! I can now access all the applications and use AirPrint, which is what I had originally set out to do!

  There is a big problem with the firmware of this particular printer as a lot of people have commented on the difficulty and had to basically 'hack' the firmware update to make it work. It is pretty poor on behalf of HP, as of course has been a recurring problem for some time. However, your help has been fantastic and despite considering myself to be pretty computer, I am kicking some of the stupid mistakes I did!

  In any case, Bravo to you and thank you for your help!

• OfficeJet Pro 8600 more impossible to connect with USB or wireless

  Using Windows 7.

  Printer was working fine on the wireless, then it ceased to be able to scan.  So I introduced to USB - all good.  Then stopped scanning.

  So I tried to unintstall and reinstall the software/drivers. Came to screeen where I'm supposed to create the USB connection, plugged into the USB port, plug-and-play software could not find two of the three drivers, nowhere to go.  Yet once uninstalled and tried Wi - Fi.  Printer is connected to the network without problem, but the computer cannot find the printer.

  Have you tried upgrading the drivers on devices - without success Manager, even though I directed it to the installation disc.  Then I tried to uninstall the printer on Device Manager and reinstall the software.  Nope.  Also several printer and computer, router reboots.  Nothing works.  If the printer at the moment doesn't help.  Thanks in advance for any help.

  Subsequently solved myself.  (Thanks for literally nothing to this forum of discussion.)  East went to the pages of HP.com support and firmware downloaded/installed, software, drivers and convenience store - everything I could find for this model.  In other words, I did not rely on plug and play to find the drivers for me, to which he seemed unable to do.  After installing everything that I ran to the resolution of problems and everything was good - computer could see the printer for a working network connection.

• Impossible to connect to the server (could not find library Shell of spring)

  Hi all

  When I run: sqlf > connect the client 'mysqlf:1527'; I get the following error:

  A failed after trying all available servers: [] for control URL: UbuSQLFire01 [1527]. (connection refused)

  A failed after trying all available servers: [UbuSQLFire01 [1527]], to the control host [port]: UbuSQLFire01 [1527]. (connection refused)

  I have done the following tasks:

  (1) I start the positioner with this line:

  Locator sqlf start - dir = index-counterpart-discovery-address = mysqlf-counterpart-discovery-port = 41111 - client-bind-address = mysqlf-client-port = 1527 - J - Dsqlfire.properties =... Locator.Properties

  Locator.Properties has the following sentences:

  License serial number = XXXX-XXXX

  Log-level = config

  statistics-sampling-enabled = true

  statistical sampling frequency = 1000

  (2) I start the server with this line:

  start the server sqlf - dir = server1-client-bind-address = mysqlf-client-port = 1528 - J - Dsqlfire.properties =... Server.Properties

  Server.Properties has the same meaning as locator.propertis more:

  Locators = mysqlf [41111]

  MCAST-port = 0

  and seams to be ok because I get:

  SQLFire Server pid: 1855 status: running

  Distributed system now has 2 members.

  Other members: UbuSQLFire01(1780:locator):63656

  But in server.log, I found this:

  Service order could not be initialized. Library order of spring which is necessary for CLI/gfsh in the classpath that is not found. Internal support for CLI & gfsh is not enabled.

  Any ideas?

  Thank you very much

  Damian

  Hi Damian:

  There could be a configuration problem with your machine's network setting. I see that when you start locator, the address of liaison is mysqlf. However, when you start the server, the message indicates that the host name is UbuSQLFire01. You can use the IP address as the link address, instead of the host name. And see if it works.

  Moreover, the message about spring Libray Shell is not the cause of your problem.

  Jianxia

• HP Officejet 6500 a: printer will not connect to the wireless network.

  I got this HP printer for a while and it worked fine.  Our old router is out and we had to get a new one.  Installed perfectly and printer continued to work properly.  The password for the router was ridiculous, that's why I changed it to something much more simple to remember.  Since then, my printer will not connect to wireless internet.  I have a ~ and reinstalled the printer but still have the same problem.  I thought maybe to try the former password would, but who does not work either.

  Anyone has any ideas that might help before chuck it and go and get a new one altogether?

  Thank you.

  Easy things first.  Turn off the router and the printer.  Turn on the router and wait 3 minutes.  Turn on the printer and see if it connects to your router.  Status?

  If no joy, temporarily disable all security in the router.  Now try to connect the printer to your SSID not guaranteed without password.  Status now?

  If OK, go back and add WPA2-AES with your simple password.  Status now?

• Problems with wild tangent error "Could not connect to the server."

  Original title: wrong with wild tangent

  I recently downloaded ie 9 latest version. If this has something to do with him or not. but I can't play all the games that I download from wild tangent. What happens, it is 'impossible to connect to the server', please check you internet connection again. but I'm connected to the internet, otherwise he would not have uploaded the game

  Hello

  What operating system is installed on the computer?

  The error is that she's trying to connect to wild tangent, but unable to complete the connection.

   

  Method 1: You can disable the security software and see if that helps.

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Reference:

  Disable the antivirus software:

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Method 2: Optimize the Internet Explorer browser.

  Reference:

   

  WARNING: Reset Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

   

  Internet Explorer is slow? 5 things to try:

  http://Windows.Microsoft.com/en-us/Windows/help/Internet-Explorer/slow-five-tips-to-boost-performance

• vCOP URl not start 'unable to connect to the server.

  I have deployed VMware vCenter Operation Manager version 5.7.1.0 on the ESXi 5.0 U2 Build #914586 host machine. Two virtual machines (VM Analytics & UI VM) are lit under the VAPP but vCenter URL of the Manager of the operation does not start and invites 'impossible to connect to the server' browser error message.

  Please help...

  Since it is a whole new setup I recommend the vApp redelpoy and try again.

  The other option is to connect to the vm user interface and check the logs for anything suspicious.

  Thank you

  Alex D.

• Apple Airprint for HP Officejet 6500 has more via a wired connection to the router

  Hello

  So I did a considerable amount of research in this through the internet and this forum and I still struggle to find a satisfactory solution.

  I have a HP Officejet 6500 a more connected by ethernet to my BT Homehub 3.

  It is I understand that even if there is a wired connection, as long as my iOS device (iPad 2 or iPhone 5) is connected to the same router, I should still be able to see this Officejet thanks to ease of airprint.

  Unfortunately, this is not the case. I get the message "No Airprint Printers Found" on both devices. The only way I managed to get my Mac Pro (Mavericks) to connect has been add to mannualy by using the IP address of the printer.

  Can anyone provide guidance on what I might hurt? Certainly, the printer must connect internet I can print from my iOS devices using HP ePrint app for iOS.

  Some might say, well, what's the problem, just use the HP application, but is not the point. I think that if something has been set up to make things easier, then use it. I chose this printer specifically for this feature is a bit frustrating for her so difficult to get the desired results.

  Hope it is something simple and anyone can help you.

  Thank you

  Steve

  Following this request and reading the many more similar questions, I think I may have solved this.

  I'm not 100% sure but I read a few threads suggests that there are issues around BT Homehub 3 and Hello so this can be a problem.

  I tried the following in the past two days...

  (1) completely don't reset my router (wiped all settings and started)-no luck!

  (2) I tried changing to WPA2 to just WPA security - no luck!

  (3) tried to convey the Hello to the printer ports - no luck!

  (4) turn off the router, printer and all the devices iOS then fed back router, printer, then iOS devices - printer appears on iOS devices, but when printing was selected iOS device returned on several occasions not connected printer error.

  Finally, what seems to have made (at least for now) has been...

  (1) disconnected the Officejet ethernet and set up as wireless.

  (2) off voltage router, printer and all iOS devices then propelled upward in the order listed previously.

  (3) so far, I tried to print a mail and a web page of my iOS devices, and both have been successful.

  By the way I've been struggling also to airplay from my iPhone / iPad until I started messing around with the settings above, and now this question also seems to be resolved.

  Due to the variety of combinations (different printers, routers, etc.) people will have, it seems to be quite difficult to find a solution that solves a single problem but I hope some of my experiences and findings could help others in some way.

• OfficeJet 6500 has more on windows home premium 7 ad-hoc connection loss

  OS: windows edition Home premium 7

  product: officejet 6500 has more

  We organize a festival and everyone has a mobile phone that needs to print to the printer...

  We don't have a network or a router and try to connect 6 ad-hoc laptop computers to the printer...

  I managed to install the software on three laptop computers and a print ad-hoc wireless, but now he says that he does not find the printer over, even though the wireless network connections that the pc is connected to the network HPE710n.E5E3C5...

  I can't connect to the http://169.254.227.197/ (printer server) of this laptop...

  so he went completely downhill...

  on this laptop, I was able to print a page...

  on three laptop I was also able to print a page...

  but now he also says he «cannot communicate with the printer...» »

  is ad-hoc only for a laptop at the same time?

  What solution do you propose?

  can we do a completely wireless network with utp cable wireless router? and do a homegroup? and connect the printer with utp?

  is the special designed to accept prints six different cell phones at the same time?

  Thanks for any solution! We need it's really bad!

  With ad-hoc connections, it is really intended more for printing in a pinch without going through the hassle of setting it up on a network.  Or, you have two computers and you have connected it via USB to an and a laptop which is wireless, you can print via ad-hoc of the laptop.

  Honestly, I recommend picking up an affordable standalone wireless router (Netgear, Linksys, etc.) and connect the printer (wireless or Ethernet, does not matter).  From there on, connect the computers on this network and you should be able to install and print without any problems.  You can find the router could be useful beyond just this configuration or may be good to have if you plan to do events like this on a regular basis.

  The printer itself is not a router and communicting with multiple devices simultaneously may create congestion in causing connection problems similar to what you experience when you use ad - hoc for as many devices.

• OfficeJet 6500 a more connected to the MacBook is not found by the HP utility, although it prints

  I recently upgraded to a Photosmart C5280 All-in-one to an Officejet 6500 has more for use with my MacBook.  The installation process was much more difficult that it should have been, particularly wireless configuration stage (the input field to get the WEP code was not active).  Since the installation of the printer that I use a USB connection to print and scan - I prefer to print using a wireless connection, but this feature seems to not work, even if the onboard display indicates that the printer has connected successfully to our local wireless network.

  I installed the widget dashboard and it detects the levels ink correctly, but when I click on the button of the device to maintain on the widget the HP utility warns me that it is unable to detect the printer, even if the printer is offline, and I can print them out and scan using the USB connection.

  I am also unable to print double-sided, which is an important feature, I want to be able to use.  No double sided button "print" or the checkbox appears in the print menu with all the applications that I usually use (for example: Adobe Acrobat, MS Word, MS Excel, MS PowerPoint).

  OK, OK - progress!

  We will restore the print system:

  -Sys Prefs, Print & Fax
  -Right (control) click inside the box that lists your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign + to add again. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

• HP Officejet 6500 A Plus E710n: HP connected connection

  I want to configure the printer on a Hotspot of Straighttalk. Is this possible?  Message of the printer is that it cannot connect to the network.

  Want detailed instructions, like what would be given to a newbee.

  Hello @rhousman45,

  Welcome to the HP support forums. I understand that you want to connect your Officejet 6500 has more on a Hotspot.

  This would be very similar to the printer connected to a wireless network.

  Follow these steps to connect the unit to your WLAN 802.11 wireless network.