Will my projects be exists after reinstalling first clip?

Similar Questions

• No audio imported after the first clip

  I have been dealing with this problem for about 3 weeks now. I can import the clip with audio when I import the first clip, but eventually all the clips have no audio imported into the project.

  It's weird. I have not found someone online with the same problem. I use Pro CC first.

  I'll probably have to delete the application and reinstall it, but I was hoping that there is an easier option.

  There are two messages. Don't know if they will help you. I thought I've seen messages like yesterday and the day before. The links do not look like they will work, but they are a copy / paste of the browser window.

  https://forums.adobe.com/thread/1572614?q=no audio after first clip

  https://forums.adobe.com/thread/1441198?q=no audio after first clip

• Video only, no sound after the first clip?

  When I put the first clip in a new audio sequence works fine but when I put the subsequent clips the video appears but no audio. It was not doint that when I used it the other day. I if this may be something wrong with the video files so I tried to use other clips I had just worked with the other day without problem and now they are doing the same. I really need to fix this quickly because I'm doing a video which is due in class tomorrow. If anyone has experienced anything like this or knows how to fix it please let me know. Thank you.

  Ensure one or more audio tracks source patch enabled.

  

• D7000 will not connect to internet after reinstalling

  Hello

  We moved our D7000 modem router from one room to the other and now it does not connect to internet at all. I spoke with our ISP and everything is fine on their end. I connected the modem and reset our ISP connection & the password, and the ISP did the same thing, without effect. The phone line has been tested, it's ok. I swapped the cables to make sure that they are not defective. I moved the modem to return to the old location, but now it does not work there either.

  WiFi seems to be ok and all our devices (phones, tablets, computer) recognize the wireless network and modem, but there is simply no internet connection. It is bizzarre! Nothing has changed, there is no new hardware, no updates or upgrades, the ISP is always the same, the only thing that differs is the location, in the same House.

  The lights on the router modem are as follows:

  Food - white

  Internet - amber

  DSL - off

  WiFi - white

  Any ideas what I could try to make it work again? Should I do a factory reset on it? This could be the cause? Move a modem do not stop working. We only had since November so it isn't old yet, and it has been working fine so far.

  Any help at all would be greatly appreciated!

  Päivi

  Hello

  It has been a while now, but I thought I would update this for anyone interested or affected by the same problem we did.

  After weeks of back and forth with the ISP and try and test anything and everything we could think, including the replacement of the D7000 in store warranty (not just once but), and nothing is helping, the ISP finally filed a foul for us and sent a CET. And what do we know? There was a flaw in the riding of Telstra which he had found, and which caused our internet connection fails. After that which has been set, we are online again. The line still falls here and there and the phone line is cute, but at least we are connected.

  And now I'm fighting with the ISP for refund during all these weeks we were disconnected while they refused to be a mistake for us and have someone out. Time for a new ISP, I think!

  Hope this helps someone else with the same problem there.

  Thank you

  Päivi

• video won't import after the first clip in timeline

  You just bought a new Mac Pro, and of course it comes with El Capitan :-(

  The only time wherever I can drag images at the same time is if I start without a sequence and drag images to the timeline to create a new sequence. A clip created the new sequence, no other cutting can be carried on it. This does not happen with the same files and the same version of the first pro on my Yosemite iMac running.

  I haven't read about this error on another subject of El Capitan, so could there be some other explanation?

  See you soon

  Alistair

  

• I tried EvevryThing! The "CREATED WITH ADOBE ELEMENTS 9 TRAIL VERSION FIRST" will not stop Displaying, even after I put in the serial number and Regerstered. Also the product does not show under my profile?

  I tried EvevryThing! The "CREATED WITH ADOBE ELEMENTS 9 TRAIL VERSION FIRST" will not stop Displaying, even after I put in the serial number and Regerstered. Also the product does not show under my profile?

  How can I fix it? Nothing in help or on the Site.

  Once you have registered the product, you should not see the banner of 'Trial' on NEW projects. This isn't the case, right? You only see on the project that you created before you register the product, right?

  That said, to remove the banner, go to the folder of directory on your hard drive where your project PREL files are stored and delete the folder called Adobe Premiere elements preview files.

• Firefox will open 4 or 5 thin legs, but then do not load any other sites after the first 4 or 5 or you can update one of these first tabs - including: config and the addon page

  Firefox 5 worked well. I installed Firefox 7, and when I ran, tabs just say «connecting to...» "and hang up. Rebooting did not help. Sites Web open correctly in IE and Chrome. Disabled all firewalls and antivirus, nothing helped. Uninstalled and reinstalled Firefox 5, everything has worked again. It was using Vista 64-bit.

  Upgrading to Windows 7, uninstalled Firefox 5, installed Firefox 7, had the same problem. Uninstalled Firefox 7 completely (including profile information, I saved this information in another file), restarted the computer and installed Firefox 7 using a clean profile. Do not install add-ons, checked to make sure that all plug-ins were updated and updated plugins up-to-date.

  Now when I run Firefox, I can load 3 or 4 or 5 tabs very well - after these first tabs bit are open, I can not open or refresh all other tabs - with about: config and the add-on Manager - I have to restart Firefox. The hangup does not appear to be associated with what websites I try to open, but it seems that the number is the problem. I ran through all the procedures of the FAQ, including changing the maximum number of connections to 48, and the problem does not seem to go away.

  As a side note, I had this same problem when I tried to go from version 5 to version 6 more. Version 5 is the latest version which worked on my system.

  The default value of the pref Network.http.Max - connections has been increased from 30 up to 256 in versions of Firefox 6 +.

  Try to decrease the value of the pref Network.http.Max - connections from 255 to a setting like 30 such as used in versions of Firefox 3.

  • https://support.Mozilla.com/kb/Firefox+never+finishes+loading+certain+websites

  See also:

  • http://blog.bonardo.NET/2011/09/30/is-your-firefor-freezing-at-regular-intervals
  • Maintenance: https://addons.mozilla.org/firefox/addon/places-maintenance/

• My norton 360 will not work after reinstalling. error 104 8504

  My norton 360 will not work after reinstalling. error 104 8504 norton crossed the settings there and said it was a problem of microsoft framework. any suggestions?

  Cannot be said with certainty, I do not use Norton, but a google found many reports like this, see - http://www.google.co.uk/search?hl=en&q=%22norton%20360%22%20%22error%208504%20104%22 for example.

  Usually like - http://community.norton.com/t5/Norton-Internet-Security-Norton/Error-8504-104/td-p/790378 or http://community.norton.com/t5/Norton-360/Norton-360-v6-Error-8504-104/td-p/672815

  If not, sorry, but after back with a little more information like the version of Norton 360, what OS W7 (starter home, home premium etc., 32 or 64-bit) and other clues that people Norton gave you as that "framework"? (For example .NET). The more information the better. So I hope someone can help.

  Good luck.

• iTunes will not open even after reinstall on windows 7

  iTunes will not open even after reinstall on windows 7

  Hello mamaKAT,.

  Read the Apple article listed here:
  iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits unexpectedly, freezes, or launch issues
  http://support.Apple.com/kb/TS1717

  If this does not help, you should contact Apple support or post in the Apple discussion forums.
  http://discussions.Apple.com/category.jspa?categoryID=149

  Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• My computer crashed and I reinstall first elements 7, but it will not recognize my serial number there are two on the CD case please help

  My computer crashed and I reinstall first elements 7, but it will not recognize my serial number there are two on the CD case please help

  When you ask a question you will need to provide some basic information

  Mac or Windows and EXACTLY what version of the operating system?

  Recent Mac AND Windows operating systems have been known to cause problems "weird."

  Lost information - response #1 in https://forums.adobe.com/thread/2008767

  Invalid License http://helpx.adobe.com/creative-suite/kb/error-serial-number-valid-product.html

  -http://helpx.adobe.com/creative-suite/kb/invalid-serial-number-cs4.html

  - and http://forums.adobe.com/thread/1038761

• Satellite P30 - blue screen after reinstalling OS

  I reinstall OS (Windows XP) on my old laptop Toshiba Satellite P30, but after the first (required to continue XP Setup) restart the BLUEBACK screen appear (System has recovered from a serious error).

  The laptop can not load Windows XP at all. Do you have an idea of what's going on?

  Thanks :)

  Hello

  It looks like a hardware problem. You should check the RAM and HARD drive.

  http://www.HitachiGST.com/HDD/support/download.htm#DFT
  With the Drive Fitness Test, you can test your HARD drive. Download the CD image, burn it to a CD and boot from it. You can then the HARD drive.
  On the same site is a user's guide if you want to know more.

  http://Memtest86.com/
  Memtest86 is a diagnostic tool to check the RAM. Here, you can also download a CD image.
  It s easy to use. Run the test of 3-4 hours and then you will see if the RAM has some errors.

  Good luck!

  Good bye

• How much time after reinstalling window 7 32 Home Premium it take before that receive updates?

  * Original title: update Windows 7

  How long after reinstalling window 7 32 Home Premium does it take before that receive updates.

  Should be immediately the minute that an Internet connection is detected. I would advise that you install updates Windows Update batch well. There are about 300 post SP1 updates, more if you have reinstalled the version Windows 7 RTM.

  My recommendation would be to install updates in batches, these 5 at a time, exclude the hardware/driver updates. Avoid installing a set of updates for Microsoft Windows and Office at the same time. Also, try to install the first small updates. Avoid installing things like the .NET Framework and SQL Express updates.
  Whenever you install updates (it's a chore, but it guarantees a more reliable experience). Try to start the Microsoft Office updates for programs such as (Word, Excel, Outlook, PowerPoint).
  Another thing, try to download the updates, and then install them. When you are prompted to restart, disconnect from the Internet and restart your computer.
  To proceed with the installation of additional updates.
  If the continuous computer to become unresponsive, try the following:
  
  You can reset the Windows Update components by running the Fixit on this page.  But if there is malware present, she will continue to reset the connection to the update servers:
  How to reset the Windows Update components
  http://support.Microsoft.com/kb/971058
  Suggest you download and save the Fixit.  Then configure the system before the clean boot by running:
  How to troubleshoot a problem by performing a clean boot in Windows Vista/Windows 7
  http://support.Microsoft.com/kb/929135
  Once the Fixit has been downloaded and the system is started in the pure State, check that the native Windows Firewall is now on if a 3rd party firewall has been used previously.  Now run the Fixit and choose the default mode.  Restart once it's done and see if the system can be connected to the update servers.  If he can't, then rerun the Fixit and choose aggressive mode.  Turn it back on when he finished the race and updates.
  I suggest before you stop and install the updates, disconnect from the Internet, first.

• URGENT::opening multiple files - i have 3 files in my directory... When I run the code I can open a file and read it... but the while loop get blocked after the first iteration... can someone me help or give some indications

  bbmChatDB of public database;

  public static FileConnection fconnRead = null;
  public static String fileReadData = "";
  public static InputStream is = null;
  data Byte [] = null;
  DataInputStream is = null;

  Here is my code...

  I have 3 files in my directory... When I run the code I can open a file and read it... but the while loop get blocked after the first iteration... can someone me help or give some indications

  try {}

  FileConnection fc = Connector.open("file:///store/home/user/documents/BSM/") (FileConnection); "

  If (fc.exists ()) {}

  Enumeration e = fc.list ();

  While (e.hasMoreElements ()) {}

  System.out.println ("files are:" + (String) e.nextElement ());

  play this file
  StringBuffer stringBuff = new StringBuffer();
  try {}
  System.out.println ("opening file")-;
  System.out.println ("file name is:" + (String) e.nextElement ());
  fconnRead = Connector.open("file:///store/home/user/documents/BSM/(String)e.nextElement(),Connector.READ_WRITE) (FileConnection);
  System.out.println ("data length")-;
  If (fconnRead.exists ()) {}
  is = fconnRead.openDataInputStream ();
  data = IOUtilities.streamToBytes (is);
  Ddd = new String string (data);
  fileReadData = ddd.toString ();
  System.out.println ("length of data:" + fileReadData.length ());
  System.out.println ("read data :" + fileReadData);

  }

  } catch (IOException ee) {}
  ee.printStackTrace ();
  System.out.println ("Exception in the read data :")
  + ee.getMessage ());
  }

  }
  }

  } catch (IOException e) {}

  e.printStackTrace ();
  }

  {Finally

  try {}
  If (is! = null) {}
  is. Close();
  }
  System.out.println ("is closed...");
  } catch (IOException e1) {}

  E1. PrintStackTrace();
  }

  If (fconnRead! = null) {}
  try {}
  fconnRead.close ();
  } catch (Exception e) {}
  System.out.println (try ());
  }

  }

  }

  You can recode this treatment so that it uses only:

  e.nextElement ())

  Once a loop iteration.

  Directly at the start saying something like:

  String fileName = e.nextElement ());

  and use fileName everywhere in your loop.

  Also be aware that printStackTrace() will do nothing in your situation, it only works if you catch Throwable.  So make sure you something output all your catches exception and also have a catch (Throwable t) to catch the things you miss, as follows:

  {} catch (Throwable t)

  t.printStackTrace ();

  System.out.println ("Eception exception:" + t.toString ());

  }

  I think your code is thrown an exception and you don't see it.

• Apps de Metro de Windows 8 Pro cannot connect to internet after the first reboot

  Hello

  I have recently installed Windows 8 Pro x 64 OEM, and I noticed after awhile that my store, Stocks, Weather, News,... cannot connect to the internet more. However, all other applications work.
  Even more strange, after installing all the updates, I noticed that I can navigate with my IE on the desktop, but not a single party of metro?
  Long story short, after several relocations (refresh option), I've noticed as a result of behavior:
  1. during the first start after installation, EVERYTHING WORKS PERFECTLY. I can browse, look at the weather, everything store.
  2. when I restart the computer and any time after that, is STOP WORKING.
  Another thing I noticed was that his (SoundBlaster Audigy) card didn't work the first time, but after rebooting, it worked, so I guess something happened after the first reboot?
  It was a clean install (OEM version) and Windows are activated, and I tried signing in with or without live account (no difference).
  Help me please, since this is quite irritating :(

  Hello

  I finally found the problem.
  The invisibility of the active network has pushed me towards the answer.
  biggest mistake I made was using the option refresh windows, because it was useless for my troubleshooting.
  By mistake I chose my first install, public internet connection and the course of the updating of the system did not ask see me that.
  In defining the private connection after clean installation (No refresh, brute force reinstall) makes everything work after reboot and completely solved the problem for me.
  Why the network does not disappear after reboot? It's something weird, and it shouldn't happen!
  The resolution of network problems found no problem, because the internet connection worked, but he had no problem with no network also appear or metro apps does not.
  This should be corrected, as it would be a great help in this scenario.
  TL; DR: Make sure you set your connection on the private sector, or windows becomes crazy and your metro applications do not work (and I also noticed that visual studio could not deploy projects in this scenario, but that's another story).

• Can't see the video after the first/Adobe CC update?

  Hi all-

  I know it might sound like a repetitive question, however I am confused through the forums and found no resolution to my current problem.

  I have used as my software video editing Adobe Premiere Pro CC for a year and have enjoyed the experience until a problem happened, I think after the recent updates to my first installation.

  I can't see one of the video for the projects that I work on, past and present - only audio.

  The original files play without problem in any available media player (windows, VLC, etc.). the projects I created in first time before you no longer see any video in the source monitor or project...

  I converted the. I am currently trying to work with MOV files. AVI through a .bat file through VLC, but I'm still without success.

  everyone knows about this problem?

  PC running windows 10 and exceeds the specification of min for Adobe premiere. This particular video file was captured with a contour HD POV camera (as much of the video I captured and published first in the past.)

  the. MOV codec is H264 - MPEG - 4 AVC (part 10) (avc1)

  Resolution 1280 x 738

  Screen resolution: 1280 x 720

  Frame rate: 59.940059

  Decoded format: Planar 4: 2:0 YUV

  I've deleted and reinstalled first pro CC and assured me that all CC content that may apply is up to date.

  Can someone point me in the direction of a patch? or more information I can include that could help me understand my problem? your help is greatly appreciated.

  Thank you very much.

  Justin D

  It seems that your computer has NVIDIA GeForce GTX 950 M + Intel HD 4600 Graphics embedded.

  Try this:

  Go to Device Manager > graphics and disable Intel HD graphics cards. That could solve the problem!

  Thank you

  Regalo