Will not read the imported video.  The controls are unresponsive.

Similar Questions

• Carpet * a DVD-RAM UJ-820 s will not read the cd rom cd-rom dvd

  OK, I read the other posts on these discs. Mine will play DVD movies and play them. It will not read the dvd ROM CD CD-ROM etc.
  This cannot be a hardware problem, it must be the software should not it?
  Can anyone help?
  Does anyone have information on how to remove these disks of the computer? Im sure I can install a new one myself if I really need to.
  Unfortunately the computer is just out of warranty

  Hi Robert,.

  Unfortunately, your problem sounds like a problem with the hardware with the optical drive. The player itself must be able to refocus its lenses to switch between DVD and CD formats, and also to pass the pressed DVD and DVD burned.

  I suggest you tyre remove the device from the Device Manager Control Panel, then restart your laptop so that the optical drive will be recognized as a new component hardware and Windows will then be re - install with standard drivers etc. If this does not work then it looks like a new drive will be necessary.

  Unfortunately you say not what model of laptop you have (the removal procedure is not the same in all cases), but in general if the car is equipped with in-house it is held in place with one or two screws accessible from the bottom of the laptop that should be removed first, then the optical drive can be slid out of its location.

  Kind regards

• I am trying to download Adobe Acrobat 8 Professional, because the disk drive on my computer will not read the disc. I can't link to this download.

  I am trying to download Adobe Acrobat 8 Professional on my PC, because the disk drive on my computer will not read the disc. How can I associate with this download?

  Available downloadable Setup files:

  • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | Suite X | 9,8 | 9 standard | 8 standard
  • Captivate: 9 | 8 | 7 | 6 | 5.5, 5 | 1
  • Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2
  • Lightroom: 6.4| 6| 5.7.1| 5 | 4 | 3
  • Photoshop Elements: 14,13,12,11,10 | 9,8,7 win | 8 mac | 7 mac
  • Premiere Elements: 14,13,12,11,10| 9, 8, 7 win | 8 mac | 7 mac

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• LR4.0 will not read the traces for iPhone App "Traces GPS"

  Hello

  I tried to understand, looking at this forum and another search on Google, why LR4 import tracklogs from the iPhone App GPS tracks.

  As far as I can tell, the tracklog information and format corect seems to me. Here is a sample of the app:

  <? XML version = "1.0" encoding = "UTF-8"? >

  < gpx version = "1.0".

  Creator = "traces GPS - " http://highorderbit.com "

  " xmlns: xsi =" http://www.w3.org/2001/XMLSchema-instance "

  " xmlns =" http://www.topografix.com/GPX/1/0 "

  " xsi: schemaLocation =" http://www.topografix.com/GPX/1/0 http://www.topografix.com/GPX/1/0/gpx.xsd' > .

  < time > 2012-03-18T 23: 20:59Z < / time >

  < trk >

  < name > Track Log 2 < / name >

  < number > 1 < / number >

  < trkseg >

  < trkpt lat = '+ 48.473296' lon = "-68.429246" >

  < model > + 65.511414 < / ele >

  < time > 2012-03-18T 23: 20:13Z < / time >

  < / trkpt >

  < trkpt lat = '+ 48.473379' lon = "-68.429238" >

  < model > + 63.738411 < / ele >

  < time > 2012-03-18T 23: 20:15Z < / time >

  < / trkpt >

  < / trkseg >

  < / trk >

  < / gpx >

  Any idea?

  Thank you

  Steve,

  The problem with the tracklog is the '+' in the specifications of the latitude. Remove the brands '+' the legible tracklog. Now, I'm not sure if a '+' is valid or not (http://developer.garmin.com/schemas/gpx/1.0/oxygen/index.html_h882410155.html), but for this time Jeffrey Geoencoding Plugin will not read the tracklog...

  Beat

• USB port from a digital Multiport card will not read the external SSD drive. Right USB - c for the USB adapter works fine.

  USB port from a digital Multiport card will not read the external SSD drive. Right USB - c for the USB adapter works fine.

  It's a new 12 '' MacBook

• Satellite A40-231: SD-R6112 will not read the DVDs I burned

  I finally got my DVD burner to work, but now the drive will not read the DVDs I burned, which, of course, defies the point of having a dvd burner in the first place... When I insert my dvd recently burned, "working" light lights and stays on. Same thing happens no matter how many times I take it out and put plug back in, restart my computer, etc... any ideas anyone?

  Hello

  @Magnus:
  Sometimes, CDs and burned DVD cannot be read with no closing sessions of engraving. You should check this option.
  In addition, this burning program did you use?
  I use Nero. Form is the program better combustion and I never had a problem.
  What you need to do is to test several DVDs. not all media work on the disc.

• I have a cd and dvd ROM on my computer but it will not read the discs and is not recognized on my computer

  Original title: no dvd

  I have a cd and dvd ROM on my computer but it will not read the discs and is not recognized on my computer

  Hi Lesliestones,

  ·         Did you do any change on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: I suggest refer you to the article in the Microsoft Knowledge Base and check if it helps.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  Method 2: You can run the fixit and check if it works.

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  I hope this helps.

• I want to completely empty my computer and start from scratch, but now my computer will not read the disk drive or the usb ports

  Help with my computer of dumping

  I have windows xp and I want to completely empty my computer and start from scratch, but now my computer will not read the disk drive or usb ports. How can I do this without the disc?

  If there is anything physically wrong with your hard drive, you can use Darik Boot and Nuke (DBAN aka) to make a scrub of the security of your HARD drive. Glance to download here.

• E T5226 machine will not read the SD,.

  E T5226 machine will not read the SD card, is there a driver for this problem? If I use a USB drive, the computer will read the card but when the SD reader support it don't read nor even appear in my computer screen.

  Using Microsoft windows 7 Ultimate

  Hi Larry,

  Thanks for posting your query in the Microsoft community!

  I understand that this E T5226 machine won't read SD card. I will try to help you with this.

  (1) did you make any changes before the show?

  (2) you receive an error message/code?

  1. check if the device is detected in Device Manager. Follow the steps to go to the Device Manager

  i. click on start, type devmgmt.msc and then on enter.

  II. research the name of the device

  If the device is not detected in Device Manager, and check if it is the hidden device.

  i. click on view under view hidden devices

  II. develop all winks in Device Manager

  III. there would be multiple entries in the device in gray Manager uninstall all entries shaded under all the winks and then restart the computer and connect the external device to the computer and check if it works.

  2. install the latest drivers from the manufacturer's Web site and even ensure that the driver is compatible with the version of the operating system installed on your computer. check if it works.

  Downloads & Documents - Support Desk / series T / T5226

  http://support.gateway.com/us/en/EMAC/product/default.aspx?modelId=1626

  Link: http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isn ' t-work properly

  Installing the driver in compatibility mode:

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  3. check with any other card SD one another if it is get recognized or detected or you can even check if the same SD card becomes recognized or detected on the other computer.

  Please post back if you have any questions about Windows. I will be happy to provide you with the additional options that you can use to get the problem resolved.

• Windows will not read the disc media

  For some reason, windows will not read dvd or cd or the floppy one and the flash drives or cards of the camera with a usb drive. What would cause this and how then I get back to work? All media works on the other pc.

  Always connect these devices to drive/USB card edge USB connection (for desktop Front panel USB ports); never use a connector of the control panel back or USB hubs.

  Read the page and manually or just download & run fixit MS; It just automatically all the steps

  http://support.Microsoft.com/kb/817900

  With regard to the FDD. I'll say change the player as FDD get very often defective & now a days it is difficult to get a new one. For the majority of them are now short lived to over-exploitation.

  Remember to answer.

  S.Chatterjee

• will not read the photo files

  When I download Canon 70 d to my adobe lightroom photos will not read anything else than .jpg files. Others are shown but foggy. When I try to import in lightroom, I get the impossible to read the message. Never happened before. Where am I wrong?

  For the 70 D to be supported, you must at least 5.2 LR: https://helpx.adobe.com/de/camera-raw/kb/camera-raw-plug-supported-cameras.html

  I suggest upgrading to LR6 (later). The upgrade is about 70 dollars and worth it - just my 2 cents.

• Satellite 2410-303 will not read the product recovery CD

  My satellite 2410-303 will not read my product recovery CD.
  When I turned off my pc with the drive in, I get messages saying that the disk is not formatted correctly.

  Hello

  It of weird, is your CD the other disc drive? Have you tried to read your cd of restoration with another computer? If the same error occurs on another computer system, then the cd is probably defective.

  Just a question: I guess you want to recover your machine, Don t you?

  See you soon

• Satellite P200D - will not read the Memory Stick Pro duo adapter

  Kia Ora
  My Satellite P200 will not read my Memory Stick Pro Duo adapter, both brand Sony.

  I am running Vista Home Premium. SD cards are read OK.
  The adapter works fine in my PC running XP Home premium. I tried two cards different pro duo. Help, please!

  Hello

  I think you should consult your user manual because this type of card is not supported:
  + Memory Stick Duo/PRO Duo and Memory Stick adapter are not compatible with the multiple digital media card slot. Do not insert the Memory Stick Duo/PRO Duo into the slot. Data lost or damaged if you use one card other than those supported. +

  Do you have more questions? ;)

• My E drive will not read the DVD-RW/DVD-ROM

  So here is the problem
  I have a vista Home premium 32-bit with sp1 computer laptop
  who will not read DVDs or games that are in DVD-ROM format (specifically, the game command andConquer 3: Tiberium Wars)
  but it will read the games more alumni who are PC - CD (such as Command and Conquer: Generals) well it will nt installs successfully

  I tried to clean my computer and reinstall using operaing system came with my laptop drive, but the drive E may not even read that
  the CD turns, stops, turns, makes a strong ' loading ', but stops then
  nothing happenes
  I restart my PC with the CD in there because he says I'm supposed to o, but nothing happens, my restartes just PC normally

  Help, please

  Hello, tyINtrouble

  The device is listed as a DVD player?

  You can check by clicking on start, click computer, and to check the label of the hard drive, he may mention DVD or DVD - RW etc.

  You can also check your connections are secure.

  If possible, you can try to test the drive in another machine, or another drive in your computer to see if it works properly.

  If your hard drive and DVD/CD player are on the same parallel cable connection, it can cause problems as well.

  We can't wait to hear back on your part.

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• CD/DVD-Rom will not read the CD

  I just upgraded from vista to windows 7 Home premium database on my laptop and now my CD-DVD-Rom will not read any CD I put in the drive. He reads that DVD very well so I'm up for a loop now. My drivers are all far better that I can find. I know it's a CD-DVD-Rom, because before I updated I had no problem reading CDs and DVDs. This is a problem because all my anti-virus and other programs are all on CD. I don't know how to fix this. Any suggestions would be greatly appreciated.

  -Thank you

  Thanks for the post with suggestions. I have tried it all and still had the same problem. I called Dell and got the laptop computer and an hour with a tech restarted my computer and try to fix it, they decided that something in the upgrade process damaged my CDRom and they sent me a new to replace my current one. I'll get it Tuesday and weather post or not, that is the question. Just in case where there are other people out there who might have the same problem.

  -Thank you again for your help

• Adobe Lightroom will not read the raw files

  I have a Nikon D3000 I was shooting in raw and using lightroom 3 for about 3 or 4 months, he has always worked very well, but today when I tried to download some pictures, he said that he could not read the files. I uninstalled then reinstalled lightroom and downloaded an update, but it still doesn't work. I don't know what to do to make it work, any ideas would be greatly appreciated.

  mbearden12 wrote:

  How would I copied the files from camera/card on hard disc using the Finder? I have not tried a different usb cable and yet, I do not understand why it suddenly stopped working.

  Connect photo/card reader to your computer and drag image files into a temporary folder (or your desktop).

  A cable/card reader/port can go wrong from one hour to the next, so you have to find the root of your problem using any other material.

  Beat