Win 7 Pro set up and use

Similar Questions

• I use win xp pro 32 bit and want to update for win 7 pro, how can I do? I have

  Hi I bought a new PC and need to upgrade all these years I was with win XP pro 32 bit, I need to switch to Win 7 pro. 64 bit...
  what I have to buy a new copy of license or just pay the amount of the upgrade to the new version of windows? If so how do I do that?

  You will need to purchase a new license, unfortunately, you can't buy just the product key, you'll need to buy the package, given that Microsoft is no longer selling just the key.

  Full version-

  Microsoft Windows 7 Professional

  Version upgrade-

  Microsoft Windows 7 Professional upgrade

  The upgrade to Windows XP?

  Please read these instructions carefully and completely before you begin installing Windows 7: there are important steps that you must follow to upgrade your PC from Windows XP to Windows 7 in order to preserve your files and settings.

  Before you begin, you'll need to backup all your data to an external storage device, and you will need all the installation discs for the programs that you want to keep. Please make sure that you have an external hard drive (see details below).

  More detailed instructions are available at windows.microsoft.com/upgrade-windows-xp. Here are the basic steps.

  1. start Windows Upgrade Advisor (windows.microsoft.com/upgradeadvisor) to see if there are known issues that may affect the installation and the question of whether you should install the version of 32 or 64 bit Windows 7.

  2 back up your files and settings on an external hard drive using Windows Easy Transfer (windows.microsoft.com/windows-easy-transfer). If you do not have an external hard drive, you will not be able to use Windows Easy Transfer. Alternatively, you can copy the files you want to keep on a USB stick, CD or DVD.

  3. you will need to manually reinstall your programs, such as Microsoft Office, after I installed Windows 7. Gather the installation for your programs and all partner/license product key discs. You may be able to download programs from the Internet. For example, Windows Live Messenger can be installed from the download.live.com/messenger.

  4. Insert the Windows 7 DVD in your PC. When asked "which type of installation you want. Click on "Custom (advanced)."

  5. when Windows 7 is installed, use Windows Easy Transfer to restore your files and settings.

  If you are not comfortable Windows 7 installation, check with a local retail or the services of the PC company store to see if they offer upgrade services.

  ----------------------

  Resources:

  http://www.notebooks.com/2009/10/13/WinXP-to-Win7/

• Win 7 Pro crashing gently and slowly!

  I use win 7 pro 32-bit. I am facing a lot of problems every day I log on that I don't know why it's happening but his frustration.

  My firewall from win 7 and the Defender is not woking. As well as autoplay, microsoft security essential suddenly crushed and now impossible to start.
  My action center is also not working.
  It seems that I need to reinstall windows 7 I don't want to do because I need to download and install the software and I do not have their configurations.
  Help, please!
  I tried fixing problem using sfc scan, but does not.
  Also I am not able to repair my system using the system repair disc.
  Waiting for answer!

  Hello Krishna,

  Perform the steps from the link below and see if it works.

  http://support.Microsoft.com/kb/2681286

  Good day!

• Edge 40-how set up and use the built-in Wecam? It is not listed in Device Manager.

  We just bought this new advantage 40 with the built-in webcam, but it does not appear in our Device Manager, or find how to use it or put up in assistance with this.

  How can we put in place and use it?

  Thank you

  Found the problem. The software has never been installed.

  I downloaded the software from yawcam and the camera has come magically to life.

• HP PRoBook 6550 b: HP Officejet J4540 Probook 6550 b 64 bit Win 7 Pro SP1 install - cannot use the sw HP Solution Center

  J4540 installation for 64-bit installations disc installs with success - although the works and so don't scan using the program "Paint" of Windows.  But the HP "HP Solutions Center 's" interface software that allows you to use any print-fax-scan function does not work - it does not install correctly.  This means that I can't scan multi page documents in 1 doc pdf.

  I had a similar problem to install this printer on my Win 8 Pavilion Desktop and am good help on the forum.

  HP PRoBook 6550 b

  Prod # WZ303UT #ABA

  s/n [personal information]

  Windows 7 Pro 64-bit Service Pack 1

  I've installed, uninstalled and reinstalled several times from the disk.

  I downloaded the windows updates

  The Ofc 2007 SP3, I downloaded and installed, in case that this would contribute to

  I downloaded the full feature software and driver for this model and tried to install from it.

  With the full functionality & pilots came "Error of Installation HP - Windows 7.hta" and I followed him with attention for the installation of USB, including disabling my Avast antivirus for one hour on each attempt, disabling a normal startup in msconfig

  After all this sw "HP Solutions Center 's" told me that the installation did not finish, so I uninstalled and retried twice, once the uninstall with the uninstall feature in the exe ' full functionality so & Driver "and once with the program control panel uninstall Uninstall System.  Same result after these attempts "not completely installed.

  Can't believe a HP product on a HP product installation can be this darn difficult.

  Do you have any help?     NB.

  First of all, thank you again for further upward.   I really appreciate your time and efforts.  I successfully completed earlier and tested the installation.  Here is what happened.

  I'm supposed to go again very carefully through your instructions and began uninstalling.  But as I went through this process, I came across problems of functionality - I mean, I could not get either the Windows uninstall or download of sw/driver uninstall function - nothing would happen.

  Then I found (surprisingly) I own the original supplied with the notebook disks (I got this for my son as he was headed for duty in Afghanistan in early 2011).  I therefore decided to back up and reinstall Windows & apps.  But the DVD player would not read discs or discs, although Bishop device says it works correctly.  My son used a lot of music and movies and had trouble with it in Af.  So the original disks were not do me no good.  I tried to create a repair on my GoFlex drive disc, but it does not work I think because the file system is not NTSC (initials right?), but is the Master Boot Record (sounds like the FAT).

  I discovered THE system BIOS before startup offered a recovery option - I used that and today tried to install it on the system and voila!

  I really didn't want to go this route to recovery because I wanted to overcome obstacles and make it work as it should.  Stubborn.  But retirement is only 7-8 years of absence and I had not a lot of time - ha!

  Now, I need to get a replacement DVD + RW and this laptop should be back to the original form, and the battery takes no charge so I guess it expired.  Since he does not need it, I have a pc to use so my wife can play Solitaire on the Pavilion.

  Awesome support both by you and others in the forum.  I am very grateful that you are here and it helped me to overcome the problems.  I learned a little, installs windows and this laptop.  At first I had no idea if I did something wrong, had the wrong approach, or what.

  Thanks again - I cannot exactly call your work a solution, but I was at the point where the complete reinstallation was the thing to do.

  Burton N

• Understand how to set up and use a sample FlexRIO clock

  Hello

  Following this discussion on inputs glitching, I learned that I need to use the area of the sampling clock to read nodes to HAVE it in my 5734 OR. So I right click 'FPGA Target'-> "New FPGA Base Clock" and selected "IO Module clock 0". In general, I followed the instructions at http://www.ni.com/pdf/manuals/375653a.pdf

  Issues related to the:

  1. I noticed that, regardless of the value I put in "Compile single frequency", timed loops using this clock works at 120 MHz. Should it?
  
  
  2. I want to gain at 10 MHz, no 120 MHz. is there a way to create a clock derived from the sample clock? (Right click on the clock gives me not the option "New FPGA derived Clock")
  
  
  3. In the example of the FIDL, engine of CQI on 5734 SMU - 7962R.lvproj, 'IO Module 0 clock' is configured to be compiled to "100 MHz" instead of 120 MHz. is there a meaning behind this value? (# 1, I understand that the value is ignored)
  
  
  4. The code example below, I get "error-61046 occurred to read/write control" unless I have excluded the "Reset" of the VI host node. This problem does not occur if I use on-board 40 MHz clock instead of the clock of Module e/s 0, (although I'd get glitched data). Am I wrong configured something?
  
  
  1. In my current, more complex program, I get the same error even with disabled node, if I stop and restart the host VI - but the next attempt would succeed.
  
  
  2. I have attached the sample file project, the screw and bitfile, where they are useful.

  

  

  Hi FKSH,

  You are right that you must Access your e/s on the 5734 NOR in the area of sample clock:

  

  (this information is by using LabVIEW for the CLIP of 5734 OR)

  It is a clock Module e/s 0 or sample clock based on your version of the FlexRIO driver you have installed. Based on your statements, looks that you use LabVIEW 2014, so be sure to have FlexRIO 14.0 or FlexRIO installed 14.1. If you have FlexRIO 14.0 or earlier, the sample clock will be IO Module clock 0. If you have FlexRIO 14.1 or later, it will be the sample clock:

  

  (also of the documentation NOR 5734 CLIP in help)

  The only support for sampling rate is 120 MHz, unless you use an external clock CLK in and it must be between 50 and 120 MHz (see page 9 of the Manual). If you wish to purchase to 10 MHz, the best thing to do would be to sample the e/s to 120 MHz and then decimate the data by a factor of 12 (keep all 12 data points only and throw out the rest).

  Regarding the FIDL, I'm guessing that you're referring to the configuration in the properties of the clock:

  

  This configuration is not actually change the frequency of the clock. The compiler uses this value so that the logic can operate at the specified frequency, but the real clock is provided elsewhere (in this case, the FAM).

  Finally, I saw error-61046 occurs more often because of the configuration of the internal clock. Make sure you use the clock on the right as the only cycle timed loop source as I mentioned above. In general, I do not recommend write directly on a 120 MHz indicator, as there are a lot of other logic that needs to be done in order to update the indicator. The data are sent to a domain different clock under the hood, so you can actually update the data and I suspect that there are some conflicts with the clocks. You also lose data as the host won't be able to read all the data before it gets crushed. Instead, I would use DMA FIFOs if you need all the data you acquire or to send the data to a different loop which will be responsible for the update of the indicator in a slower clock domain.

  In general, I recommend always that the start-up of the examples in the Finder as a good place to check if the equipment works properly and as a reference for the correct configuration. Once you compile the code, you should be able to run it natively to acquire some data. "" "These examples will be under input and output hardware" FlexRIO "Modules e/s ' NI 573 X ' NI 5734.

  Best regards

• How to set up and use two video cards at the same time.

  I have HP Pavilion a6150d desktop under Windows XP SP3 PC. My goal is to be able to use the integrated video card and GeForce 220 video card I just buy at the same time.

  The integrated video card and GeForce video card (connected to the PCI-E) are installed and usable, but the problem is that I think that my computer cannot detect a video at a time card, so I can't use 2 monitors at the same time.  The video only card detects my computer is what I chose as a primer in the BIOS. When you go to the Device Manager display adaptors I can only find an available video card and that's regardless of Setup as primary in the BIOS.

  My GeForce 220 have VGA, DVI and HDMI display connectors, but I don't have that VGA cables. So my only option at the moment is to use my video card GeForce with band single VGA connector and integrated everyone to use my two monitors.

  I hope someone can help me without spending more money...

  "You're not going to be able to use the graphics card integrated Intel and PCIe x 16 graphics card at the same time."

  Thanks Frank, this already answered my question, you help me already by saving my time searching for the fix (since there is NO solution), although it won't save my money I like always your quick response and your support. My monitor is HPw1907 with a DVI connector, so I'll just buy a DVI cable. My other monitor LCD SHARP that have a HDMI and VGA connector so I'll just use the VGA cable in this one.

  So I guess that my simple goal is not achievable using HP Pavilion a6150d. I love HP more than Dell, but it's doable in Dell, so I hope that HP will have way on how to make this thing work in the future.

• The error code automatic updates - Win XP Pro SP3 - 126 and 8007041 D

  I just got rid of a trojan/virus.  I'm clean now.  But WU has been broken in this clean-up operation.  Here's what I've done so far:

  1. I'm in Services.msc try to start the automatic updates service.  It returns an error code 126 - the specified module could not be found.
  2. Try to update via the Win Update Web site gives a 8007041D error.  BITS is running.
  3. I find a sequence of several - staggered for re-registration of components to WU.  Attempt to regsvr32 mshtm.dll, that fails with mshtml.dll was loaded, but the DllRegisterServer entry point was not found.  The file cannot be saved.

  I hope someone here can point me in some direction that everything I've tried so far heading an impasse.

  Thank you.

  H

  [1] q: A Norton free trial or a test of free McAfee [a] came pre-installed on your computer when you bought it? (No matter if you have never used or activated).
  A: No....

  [2] ... I notice Explorer (not IE) runs very slowly.

  A1. Did you do a clean install of Windows XP or Windows XP was preinstalled by the OEM when you purchased the computer?

  A2. How did you determine that Windows Explorer [EXPLORER. [EXE] "running very slowly?  It was sudden, new behavior or...?

  3. when (exact date) has been Updated for Windows XP (KB971029) installed in Add/Remove programs?

  4. is Firefox, Chrome or any other alternative browser installed?

  5. have you already had the opportunity to do a Repair Installation or a clean installation of Windows XP for some reason any?

  6. are you familiar with "Registry cleaners" (e.g., Registry Mechanic;) System Mechanic; RegCure; Advanced SystemCare. AVG PC TuneUp. Norton Registry Cleaner; PCTools optimizer; SpeedUpMyPC; CCleaner)?

  [note2self:FixIt & SScan]

• How to disable the touchpad on Dell Inspiron 1545 in Win 7 Pro SP1 when you use an external mouse?

  I would like for the touchpad on my Dell Inspiron 1545 are automatically disabled when I plug in my Logitech wireless mouse.

  Thanks to all who responded.

  I had this mess when I did a system update Dell routine and sent the new Alps driver, who immediately washed Select my previous settings.

  Yes, I tgried to return to the former pilot, who worked flawlsly for many a yearf without success.

  I finally solved the problem, at least on my machine.

  A. Click Start; in the RUJN area type: main.cpl

  B. click on the graph of a touchpad

  C. click DEVICE SELECT

  D. at the bottom of this window, you will see a "Disable touchpad" line preceded by a checkbox. Check the box and now the touchpad is disabled.

  It worked on two Dell laptops different, I've worked on both running Win 7 SP1 with the new driver Alps.

  Good luck to all and THANKS for the suggestions.

  E-mail address is removed from the privacy *.

• I am trying to load Photoshop CS4 of DVDs to computer I5 Win 7 Pro 64 bit and it has an error and will not be installed.  Serial number deleted

  How can I tell if it is a question of 32-bit / 64-bit?  It's an old copy of CS4, but it should work on Win 7, shouldn't it?

  [Please do not post your key to series on the forums]

  Hi Wizbang_100,

  Please try to re - download Photoshop CS 4 after turning OFF all security software, firewall and browser protection tools that are installed on your machine.

  Download Adobe Creative Suite 4 products

  See also, How to download, install and activate Adobe applications

• Tecra S1: Win XP Pro. Hibernation and Sleepmode no longer works?

  Hello

  If I try to activate the sleep or hibernation mode,
  in the 'Ereignisanzeige' where I can see XP-problems.
  Here, I get an entry that the program
  thotkey.exe
  order at the request of hibernation.

  Does anyone has the same problem? Or / and any idea?

  Hope you can understand me.

  THX a lot.

  Patrick

  Hello

  Have you tried to reinstall Toshiba Power saver utility?

• How to enable the memory full use in Win 7 Pro 64 Bit OS

  Hello.

  I have a desktop with Win 7 Pro 64 bit and its installed with 8Gigs of RAM above, but when I check in the properties of the computer it shows only 8 GM installed and 3.86 inuse.

  Can anyone suggest me how to get the memory of 8 GB in use. ?

  Concerning

  Ishaan

  Why do you need to use all of your RAM?

  Are you trying to find how to use "RAMDisk"? The link below is for one of the
  software available. A search can find a free version.

  http://memory.Dataram.com/products-and-services/software/ramdisk

  The first I've heard talk of RAMDisk was today in the thread below.

  "You not use RAMDisk?
  .

• HP Photosmart Plus B210e print is not on MacBook Pro running Lion and the use of Airport

  HP Photosmart more B210e

  MacBook Pro running Lion and using Apple Airport

  Cannot print

  Cannot find printer

  Printer reinstalled with no luck

  Help, please.  Thank you.

  Hi jpjones2,

  It worked before? If so, I suggest restarting the base station AirPort, Mac and the Photosmart. Then test it again. Ensure that the Photosmart works well autonomous - try printing a copy on the device.

  Is only the failing printing and analysis very well? Or you are not able to install the device on your Mac at all?

  Already check the Photosmart is connected to your network and has received an IP address?

• Re: Tecra R950-18F: win 8 Pro starts a new SSD drive

  Hello

  Having a few issues with the victory 8 DVD pro included with my laptop.

  BIOS is set as UEFI + secure boot, win 8 pro dvd starts and I can start recovery, after a while, he asks disc 2 and starts to recover win 8.

  After completion and reboot, it does not start and shows just the toshiba logo.

  Factory hdd with SSD OCZ VERTEX 4 is replaced by the bios.

  What could be the problem?

  > Drive HARD factory is replaced with SSD OCZ VERTEX 4 recognized by the Bios.

  You have the same start-up problems 8 win using the original HDD equipped Tecra R950?

  From my point of view, it would be possible that this laptop does not start successfully because of the new SSD.

  I recommend you check the previous HARD disk.
  If the laptop could start correctly, the problem is related to the new SSD drive.

  In some cases, it would be possible that the SSD firmware must be updated.

• P2 - 1321a: upgrade my win 8 pro to win 8.1 pro

  Hello

  my PC was win 8 pro. after upgrade to win 8.1, the 'pro' was gong. Why?

  my PC was another win 8 pro as well and had no problem to win 8.1 pro.

  Please tell me how can I upgrade my 8 pro victory to win 8.1 pro.

  Thank you!

  JZ - SYD

  From what I've read about the specifications of your computer, it had Windows 8 core and not Windows 8 Pro from the factory.  When you update the store Windows or Windows Update, Windows will search the version you have on the system and download the appropriate version.

  If you feel that the above is not correct, do a factory restore using the recovery or recovery that hopfully disks Manager, you created when you first got the computer and check the installed system.