Win 7 says module duplex printing not installed while it is installed
Windows 7 Ultimate 64 bit. HP Photosmart C6280 is connected to the USB port.
I followed the steps to set the option to print double-sided on "Installed" in the printer properties and automatic duplex printing in the book save the printer preferences section. However, when I print a document, I get a message that says:
"Missing automatic duplex printing module.
"The document has been configured using the Automatic Two-Sided Printing Module, but module is not installed in the device. The document will be printed recto. »
I know that it is installed in the printer, because I was able to print duplex when the printer is connected to a Windows XP computer. But since I've upgraded to a new computer with Windows 7, there is no more automatic duplex printing.
What can I do to fix this?
Kind regards
I whent to a UDP driver on the HP support site, but my model C6200 series printer does not appear in the list of supported printers.
in any case, I despair, I've not unhooked the printer and its drivers. When I connect the printer back, Windows installed the drivers and the duplex now printing.
Tags: HP Printers
Similar Questions
-
Vista / Win 7 Troubleshooting Guide duplex printing
Some users have problems using the automatic duplex unit in Vista or Windows 7. This guide addresses some of the common questions and provides solutions.
No option to duplex print. The selection for automatic duplexing two may be grayed out, or only manual duplex is available. This happens usually because the duplexer is not recognized as installed, or the driver can default to not installed. To fix this in Vista do the following: click Start, Control Panel, printers, right click on the printer, run as administrator, properties, (continue), parameters of the device, Installation Options, switch to "both sides Duplex" installed, OK. For Windows 7, the method is similar: go to start devices and printers, right-click on the printer, printer properties, together of settings, Installation Options, device the "two sided faces" to installed, OK.
Back side Prints Upside Down. There are several possible problems that can cause the back side print backwards. The first thing to check is the settings. Generally, there is a checkbox in the 'Finish' tab or 'Features' to select 'Pages Flip Up' or maybe 'bind on the short edge. You may find that some programs require this box to be the reverse of what you would expect. I've heard tell that some Adobe products requiring the creation of reverse. If changing the setting does not change the direction so you may need an updated driver or a fix. You can check the website of HP heredriver updates. Fixes for some ink jet models are available here. This problem has been corrected in most of the drivers for Windows 7 but can still occur on Windows 7 systems that have been updated to Vista. The patches for Vista works on Windows 7 as well if necessary. [Updated - HP has now fixed this problem in a lot of pilots. Check here before I continue with my patches, the HP solution is better automated to install the hotfix].
"Material duplexer is not installed". Some printers such as the Photosmart C7280 connected networks may incorrectly indicate that the material of the duplexer is not installed when you print two-sided pages. By clicking on 'OK' will cause the pages to print correctly. HP has released updates for the drivers to resolve this issue, see the HP driver page to see if updates are available for your model. If your printer does not have an available update there is a work around which may help: some users have reported that installing the printer as a connected USB device, and then restored in network after the installation will fix the problem temporarily.
Other questions. If you have other issues to print duplex on Vista or Windows 7 please post the questions as a response in this thread. Be sure to note what printer model, how the printer is connected, your operating system as well as the details of the issue you are experiencing.
It is a placeholder to mark the thread as an answer. (This makes more visible in search of the forum.) To see solutions read the first post on this topic.
-
WMP will play any WMA files say that it is not installed correctly
When using napster using WMP it won't play any WMA files say that it is not installed correctly, BUT it can play MP3 files.
I've used this for years and only by recent this problem started?Hello
Follow these methods and check if that helps:
Method 1:
Follow the exact steps in the article to remove Windows Media Player 11, and then try to install it and check if it helps:
How to uninstall Windows Media Player 11 in Windows XP
http://support.Microsoft.com/kb/934372
Method 2:
You can also read this article and check if it helps:
Resolution of the problems of reading in the Windows Media Player for Windows XP
http://support.Microsoft.com/kb/306317
See also:
FIX: update for Windows Media Player 11 for Windows XP
http://support.Microsoft.com/kb/939683
Resources for the resolution of problems in Windows Media Player
-
deleted the windows on windows defender and impossible to reinstall! Message comes out and says that I should not install windows defender, because it came with windows vista. How can I try to fix it when I have windows Defender on my computer?
You can not delete Defender in Vista.
It is part of the Vista operating system.
You can only activate / it:
http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Defender-on-or-off
Enable or disable the Windows Defender
Many anti-virus have conflict Defender (McAfee, AVG, etc.), and turn it out / conflict with it.
Microsoft Security Essentials, it turns off because it has its own version.
See you soon.
Mick Murphy - Microsoft partner
-
20225 port and printer not installed error
I installed Adobe Pro 7 on my new system with windows 7 on it and received an error 20225 port & printer not installed. How can I fix it?
Hi Grandpappy3,
Acrobat 7 has not been tested and is not supported on the Windows 7 computer.
Please view to buy the last Acrobat 11 subscription.
Kind regards
Rave
-
Error message "Duplexer" is not installed on J6480
I recently bought an Officejet J6480. The printer is connected wireless to my router so I can use the printer with my laptop, but I use a USB cable from my older desktop to the printer. I am running Windows Vista 32 on both computers. I had the "default of automatically in"soft stop"power mode" problem (I am aware of the solution to "push the button 'Cancel'" this problem) hoping to solve this problem, I have updated the original (BHM1FN0812AR) firmware to the latest version (BHM1FN0830AR) on the ONLY Office.
I still have the "failure to go into 'soft stop' power mode" problem with computers and am now getting the "duplex module not installed" error message when printing from the desktop (I'm aware of the solution 'click on the button 'Print' on the error message'). I don't get the duplexer message error when I print from my laptop which still has the original firmware.
Anyone know if the PS_AIO_02_110_008.exe (1/1, 15.97) Print Driver Update that resolves this problem in the 7280, would solve this problem on the 6480, without causing other problems? Uninstall the HP software on my desktop and put it back to leave the disc would return to the original firmware so solve the problem of error duplexer?
Thanks for any help you are able to provide.
The firmware is installed on the printer via a computer, but once installed in the printer there. Both computers will see the new firmware of the printer once it has been installed from any computer.
I suggest to install the updates available here and here. For the other printer models, I saw reports that temporarily to install the printer on USB and then change to the network connection can solve the duplexer not installed no error message. (I guess you went to the folder. printers right click on device J6480, properties settings, installation options, and then assign the duplexer installed, OK.)
Kind regards
Bob Headrick, Microsoft MVP printing and imaging -
Satellite C50-C023 - Win 8.1 PCI Device driver not installed
Hi This is my 1st post here
My friend bought the satellite above with 10 Windows pre installed on it. accounting software, it should run on it is not compatible with win 10.
He asked me to help downgrade to win 8.1. I called and they said yes everything will work, but Toshiba is no guarantee nor provide a decommissioning. That is to say, do so at your own risk.
So he decided to go forward and we bought 8.1 and I installed it. now, everything is ok except for 1 PCI device display as not installed in Device Manager. Any help in this matter would be greatly appreciated. It's one thing to chipset?
Kind regards
John
Hello
Recently, I helped a friend the low-grade sound C50-C023 to win 10 to 8.1 Win.
Everything went well except that now, I in Device Manager my PCI device not installed and no updates can be found anywhere. I have just completed do all Win 8.1 updates but still have this problem
Any help would be greatly appreciated.
Kind regards
John -
My disc will not install adobe on my air as they say apple do not support microdots?
You can use Acrobat, if you get the Mac version (or a subscription, which is independent of the platform).
-
Premiere Pro error saying Media Encoder is not installed (it is)
I am trying to export a sequence of first Pro CC 2014 to Media Encoder CC. After changing all the export parameters for what I want to in the first, I'm going to click on queue and the message "Adobe Media Encoder is not installed. Please download and install it to use this feature. Go to https://creative.adobe.com/apps".» I have Media Encoder open right now. No idea why they are not in communication? I use a Macbook Pro btw.
You need SOUL 8.0.1 to match this version first. The most up to date for both is 8.2.0. Try clicking on help-updates in each program rather than using CC updater.
-
I have a gateway lap top that gave me and it has windows vista. I train download XP Pro, but when I press on enter, after starting from the cd, he says he is not any hard drive & to check if it is enabled. If it can mean my hard drive is not good? I don't know where to look in the bios and see if it recognizes. He shows me the ram, but I don't see anything on a hard drive in the bios.
See the post of Bruce Chamber.
If you have a SATA drive, you
need to use a floppy disk to load the SATA driver (and the laptop probably doesn't have a floppy disk)
or
change the setting in the BIOS so that the drive uses "Legacy" or IDE compatibility"mode or disable mode"SATA Native. "
or
create an installation CD slipstreamed that integrates the SATA drivers. See, for example, http://news.softpedia.com/news/Install-Windows-XP-On-SATA-Without-a-Floppy-F6-47807.shtml if you chose this option, ImgBurn is a good free utility to create ('burn') the CD once you used nLite to create the ISO file.
-
I installed this on many machines from Win 95. I now running on several machines of Win XP Pro SP3.
INSTALLATION of Sage BJ. EXE has a creation Date of the Sep 1998 05, size 24 KB. I tried every compatibility mode selection, WinXP SP3 via Win 95 - Win 7 don't like him for any of them. So I can't even at first base to install it now.
Research online, I can't find clues for newer versions.
It would seem that, if it was "mission critical", I will follow a path to upgrade to Windows 7 Pro, so that I can install it "Win XP Mode". Maybe need arises for some other software, but not for running a game.The program was designed there is an earlier version of win years, cannot as such that it is supposed to operate an o/s, win7, what is fundimentally different from earlier versions of victory, even in compatibility modes.
Maybe that is a 16-bit program, and you are using a version of win7 64-bit?
Even the installation of Virtualwinxp is no guarantee it will install
-
I developed the app use BBM and using BBM dependecy check. Here are the steps that I put fallow
MyApplication, MyApplicationProxy I'm having.
(1) in the class MIN_BBM_VERSION = "6.0" dependecy Tester, I used
(2) updatejad MyApplicationProxy.jad MyApplication.jad
(3) I have unzippped all the MyApplication cod, MyApplicationProxy in a single cod
(4) now I have deplyoed in Server
(5) when I access the jad in the device which is having BBM version 6.0, makes his works very well
(6) but when I encouraged to access the jad in the device which is having BBM version 5.0, it gives me the following error.
This Application module reuires that wasn't installed then: net_rim_bb_qm_platform
Please help me.
I think that your problem is related to the solution you used for this problem:
In this issue, you have used UpdateJad as follows:
UpdateJad.exe myCoreApplication.jad myProxyApplication.jad.
I've never used a UpdateJad, (I do updates myself,) but I suspect that the operation takes the myCoreApplication.jad and add the required details of myProxyApplication.jad. This means he gets the name of the correct Application, but includes other details of the myCoreApplication.jad including the dependence.
If you do the opposite (I suspect that you used to):
UpdateJad.exe myProxyApplication.jad myCoreApplication.jad
then it was simply copy the relevant parts of myCoreApplication.jad in myProxyApplication.jad, and this did not include the dependency on BBM, but also means that he did not update the name of the Application.
In any case, I think you have two choices:
(1) you are using old order and edit the jad file created to update the name of the Application
(2) use the new order and edit the jad file created to remove the dependency: it's pretty obvious in the jad if you look at the content.
Try both and see who works and if they do, decide which method you want to use.
Let us know how you go.
-
Canon Imageclass D320 All - in - One Printer not install under Windows 7
My new laptop Windows 7 cannot install a driver for the Canon ImageClass D320 printer. The utility plug & play in Windows 7 has failed to find a driver for the D320. I have the installation disc that came w / the D320, but it is also a failure install a driver. (This installation disk includes drivers for only Windows 2000, Windows XP, Windows 9 X, and Windows Millennium Edition.) The Canon support site @ http://www.usa.canon.com/cusa/support/office/imageclass copiers/imageclass d320/imageclass d320? selectedName = DriversAndSoftware offers drivers the D320, but only for these same 4 OS (that is, only for Windows 2000, Windows XP, Windows 9 X, and Windows Me). Maybe the D320 needs a 64-bit driver?
Any information would be appreciated.
I certainly do not see 64-bit Windows 7 drivers for the D320 to http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/imageclass_series/imageclass_d320#DriversAndSoftware , and more operating systems you have listed they also show Vista and Vista 64-bit and Windows 7, Windows 7 64 bit.
I use Firefox as my Internet browser. However if I use exactly the same link using Internet Explorer 9, I see no Windows 7 driver. If I use Internet Explorer 9 and change it to compatibility view, I can see all the drivers. (To do this in IE 9 just click on the little icon that looks like a page torn paper in have - in the address bar to the left of the Refresh - button or go to the Tools Menu and select compatibility view)
This is the second time I've seen this problem with the site driver of Canon (where I saw a thing and the person I tried to help him was to see something else on the same link).
Here is a picture of what I see on the website of Canon, with the drop-down list to choose the operating system by selecting the driver 64 bit Windows 7:
-
Creative cloud says that I have not installed applications?
I have installed multiple applications, creativity, cloud launcher and Launcher now says I have nothing installed? How would I be able to solve this problem? If it helps, it happened after I installed Flash Professional, which doesn't seem to work properly.
Thank you
SamHello
This link might help: Panel Apps shows not pre-installed creative cloud applications
Kind regards
Sheena
-
I wonder if my Macbook must be sent to the trash since I can no longer get updates to the OS. I have 10.6.8. When I try it tells me that they will not be installed on this computer. It works fine but I do not receive security and other software updates any more. What can I do?
The computer has a value for someone who does not have a new OS X and does not use
the last iDevices; Thus the old app from iTunes and stuff would be a good deal, as it is.
Without more information on the model number and build year, propose any later version
OS X update (because there may be one or two; if nothing shows up on the Mac App Store)
However, without more information, such as the about this Mac can show you the
Details on my side that are not lacking.
• How to identify MacBook - Apple Support models
{This page to support old shows original - and also new macbook 12 in. of retina series}
What is your MacBook (13-inch, mid 2010) computer model?
This is the May 2010
Abandoned by July 2011
Model identifier MacBook7, 1
Model number A1342
EMC 2395
MC516LL/A order number
The link to the support page above also includes how to identify the details in a separate link in it
that tells how to find the serial number and other specifications. Sites such as the
http://EveryMac.com include most if not all Apple product specifications.
If the computer that you have is a MacBook 13-inch Mid-2010, he could run the new OS X
However, if the old hard drive is full, saved from the old stuff, you want to get an external
Hard drive and create an archive of it; Perhaps a clone of the complete system. However if you
use a time Machine, which can help in some cases. The original hard disk can be
have worn out, so it might be a good idea to replace it with a new larger capacity
hard drive. In addition, chips of memory could be improved to higher total capacity, too.
Those things would give the MacBook OSX current or most recent advantage.
If the computer is far from the trash. Those who are still worth something, too, if sold at
an individual and not some buy-TI - cheap.com. If you choose to be rid of the macbook:
• What to do before you sell or give away your Mac - Apple Support
• How to prepare your Mac for sale:
http://www.thesafemac.com/how-to-prepare-your-Mac-for-sale/
The browser upgrade: your model may use Mozilla's Firefox, he sees updates...
• How to download and install Firefox on Mac - Mozilla Firefox Help:
https://support.Mozilla.org/en-us/KB/how-download-and-install-Firefox-Mac
Anyway, the computer is new enough to be of good use.
Most of my friends is older than that!
Maybe you are looking for
-
Qosmio G40: Can I use the infrared receiver SMSCIR with other devices?
My Qosmio G40 was a "SMSCIR infrared receiver" to be used by the remote controller. I wonder if it is possible to use this receiver with other software. For my non polar, I need an infrared receiver to send data from the watch to the laptop. On my ol
-
Have no volume under windows, but a sound on speakers
Have no sound on computer, but be able to hear the sounds of static on the speakers?
-
Bus SM for Fujitsu T4220 Tablet controller driver
I had to replace a hard drive on a Fujitsu T4220 Tablet. We have installed Win XP Pro SP 3 and the final driver is missing is the SM BUS controller. How can I get the driver to do this and WIN XP PRO is compatible with this unit, or should she have
-
4530 s: Windows starts do not and the installation is also not be completed
My laptop was turned off when starting, once I'm not able to start again, I try to install windows 7 but it gives errors when installing when it comes to fill and repair also does not help. Kindly help.
-
The Devs creating their active Frame for a separate QML file covers? I'm stuck
Bit in trouble, I do my best to bring my Apps support 10.2.1 10.2.2 I practically everything by working the * beep * covers Active, I did do a check and create the file QML according to less than 10.3 or greater ComponentDefinition { id: creator; sou