Win 8 - PC Doctor has stopped working

Similar Questions

• Cannot use DVD BD Player: WIN DVD MFC application has stopped working

  Tried to install my old version of WinDVD and failed and in the process perhaps accidentally deleted a file,
  now every time I try and use DVD BD drive I get the following message:

  "WIN DVD MFC application has stopped working"

  I tried to use restore point, but still get it, can anyone advise please?

  It will be interesting to know what model of laptop you have.
  Anyway, in my opinion, there is a software conflict. I guess players use even modules or plug-ins, and there is a conflict.

  I put t know what solution can be, but maybe you should remove both players, restart your laptop and make own BD drive in the hope that it will work properly.

• P50 win 10 Pro - footprints digital has stopped working

  Hi all

  I just got my P50 (20EQS00600, M1000M, i7-6700HQ, 16 GB of RAM, 512 GB SSD) about a week ago and I quite like it. However, there is one thing that drives me crazy: after that I upgraded to Win 7 Pro 64 bit for win 10 Pro, the fingerprint feature has stopped working. This issue seems to be related to those reported in these two threads for the P70, but at the same time appears sufficiently different to warrant a new post:

  https://forums.Lenovo.com/T5/ThinkPad-P-and-W-series-mobile/P70-fingerprint-software-issue/m-p/22517...

  https://forums.Lenovo.com/T5/ThinkPad-P-and-W-series-mobile/fingerprint-and-sound-problems-P70/TD-p/...

  So, here is what I did:

  (1) I correctly installed Win 10 w/o retaining data/settings from the previous installation of Windows 7; I even reformatted the SSD drive.

  (2) for the initial installation, was asked by Windows Hello register prints I've done.

  (3) fingerprint worked during the first connection, but then disappeared as if by magic. Hello Windows is no longer appears as a connection option in the control panel of Win.

  (4) I found in Device Manager the Synaptics WBDI reported the following problem: "this device cannot start. (Code 10) ".

  (5) repeated uninstall and reinstall drivers are without success. I tried both have Win a driver and manual to install the drivers I downloaded from Lenovo page.

  (6) when I uninstalled the drivers and then wiped the fingerprints stored in the BIOS, I was again able to register fingerprints with Windows Hello. However, this time the fingerprints were not yet registered in Windows, and I had to cancel the procedure. Immediately after, the Synaptics driver stopped working, cf. 4).

  I am at a loss what to do. Strange thing is that I ran Win 7 for about a week, and the fingerprint reader worked fine all the time. (Due to the scaling of the questions on my 4 k screen, I bit the bullet and went to win 10, in case you're wondering.)

  So everyone out there has the same problem, does anyone have a solution?

  Thank you in advance and the best,

  A

  
  

• PC-Doctor module has stopped working, but do not know if I have it on my computer...

  In the last 3-4 days I get a window intermitant arise seems them to be a "Microsoft Windows" its origin in the upper left corner of the window saying: "PC-DOCTOR MODULE has stopped working. A prolem caused the program to stop working correctly.  Windows will close the program and notify or if a solution is available. "Then a box of"close the program ".  I find 'FIND' to search for a program of the PC-DOCTOR MODULE and can not find one on my system. and "googled" it and came up with some info, but I'm not sure if it's a real source of assistance of a scam 'spyware '!   What I treat, something real, or something trying to eat me alive somehow?

  In the last 3-4 days I get a window intermitant arise seems them to be a "Microsoft Windows" its origin in the upper left corner of the window saying: "PC-DOCTOR MODULE has stopped working. A prolem caused the program to stop working correctly.  Windows will close the program and notify or if a solution is available. "Then a box of"close the program ".  I find 'FIND' to search for a program of the PC-DOCTOR MODULE and can not find one on my system. and "googled" it and came up with some info, but I'm not sure if it's a real source of assistance of a scam 'spyware '!   What I treat, something real, or something trying to eat me alive somehow?

  Hey Toccet

  to be on the good side for malware scan

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem if it is malware before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If this does not work in normal mode only the above work in SafeMode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Walter, the time zone traveller

• kdbsync.exe has stopped working - win 7 64 bit

  I am running Win 7 64 bit on an HP Pafilion HPE h8 - 1360t.  After last week round of updates my computer can't play mp4 files, the Media Center will come is no longer (Message: "Windows Media Player has stopped working"), You Tube files will no longer play, the Web of magic HP also would not come to the top, and the mysterious "kdbsync.exe has stopped working" message when I reboot.

  After hours of reading the forums, I found that it seems to be related to the AMD graphics card update.  My computer has an AMD Radeon HD card 7570.

  On the AMD website it is listed as a legacy for XP computers adapter.  I don't know why HP installed in a computer running Windows 7 64 bit with an Intel Core I7 CPU.  It does give me confidence in HP equipment.

  The AMD utility correctly detected my card and told me that I needed a driver called:

  14-4-Win7-WIN8.1-64-DD-CCC-WHQL.exe

  But when I clicked the Down load button, I received the message, "could not conntect to the server.  Could not parse error. »

  I have not found such a driver on your Web site.

  How can I get my Media Center works again?

  The idea of turning off all non-Microsoft services, scares me to death that I now have my computer how I want it.

  I've also posted on the forums of AMD that I concluded that their Board of Directors has been offending material element:

  http://forums.AMD.com/game/messageview.cfm?CATID=454&ThreadId=173935&forumid=11 you can read my response to the agent who helped me.

  Basically, I had to uninstall all the drivers AMD and sotware using functions of control panel of configuration/programs & and then run the clean uninstall AMD program: http://support.amd.com/en-us/kb-articles/Pages/AMD-Clean-Uninstall-Utility.aspx

  Then install the drivers from here:

  http://support.AMD.com/en-us/download/desktop?OS=Windows+7+-+64#AMD-catalyst-packages

  I do not recommend installing this set of drivers unless you are SURE that they are correct for your hardware.  I could not use steps 1-5 on the AMD site because the last necessary step you choose the operating system that your equipment is running.  The HP installed in my computer 'last and best' video card a year ago was so old that the operating system that is only offered to step 5 have been XP and Vista!  Be aware that HP uses inherited in its latest PC hardware.

• Win 7 error "Windows Explorer has stopped working"

  Using Win 7 Home Premium, I get a pretty consistent message "Windows Explorer has stopped working" and the auto check routine does not come to the top with a solution.  I know for sure I can do it almost everytime with a right click on the Recycle Bin (I'm trying to empty).  My security program is Microsoft Security Essentials.

  None of the positions worked for me. However, I could use the logger and hunt down later.

  Here's how: go to the beginning
  where it says, "computer", right click and select 'manage '.
  under System Tools, select "Observer of events," look under "type of event" and find errors.
  Scan down the list - make sure that the window is quite large, so you can see the errors in the last day (or maybe it's time).
  When I did, I found many errors about "windows Explorer." When you click on one, it opens a box with details. All the ones I checked had the same details, more or less.
  Most of the details seemed incomprehensible, but, in my case, a particular .dll kept being mentioned, file called AFLDLL. DLL.
  what he said was: the name of the failing module: AFLDLL. Unloaded DLL or something to that effect
  So, I went to start, search and put in AFLDLL. DLL and I was able to determine it related to a program for iomega dvd writer cd burning.
  When I uninstalled this program from the Control Panel, add remove programs, the problem stopped.
  Maybe the causes are different for different people. but at least it will give you an idea.
  Maybe you can find some information on what is involved in your mistakes of "windows explorer".

  James H Waters
  E-mail address is removed from the privacy *.

  James h waters PhD.

• "itunes has stopped working" Win 10

  Hi all

  iTunes worked very well for me in Win10, until the last update. (12.3.3.17) now, whenever I run iTunes, I get the message "iTunes has stopped working" and the program stops. I tried to uninstall and reinstall the program as detailed here...

  Troubleshooting problems with iTunes for Windows updates

  .. .but the program still "stops working."

  My system Win10 House, 64-bit, all of the updates. iTunes is 64 bits, too.

  Any suggestion is appreciated.

  I had a lot of problem with my iTunes crashing / freezing - up after I've upgraded to the latest version also.

  In my case, the symptoms were different, but after trying many possible solutions, which had no effect at all, I discovered the following post useful here:

  Empty/corrupted library iTunes after upgrade/crash

  While the symptoms are different, because you have already tried to reinstall the software, perhaps the problem may be related to your library, iTunes, or (as in my case), seems to be a problem caused by the Apple's music, which only manifested itself during the access artists in iTunes that I have previously set to 'follow' Apple music!

  After that I've disabled showing music Apple (from the tab general in iTunes Properties) as suggested in this article, all of a sudden my iTunes stopped freezing / crashing.

  If your iTunes library is potentially corrupted, the following Apple article should be very useful:

  If you do not see your content once you update iTunes - Apple Support

  I hope this helps!

• HP Elitebook 8470 laptop PC - graphics Intel HD 4000 - GfxUI has stopped working - Win 7 x 64

  Hello!

  Since I installed the Intel video driver and Control Panel 8.15.10.2712 22 June 2012 (sp57420.exe) - later recommended by HP.com pilot for my Elitebook 8470 p / OS, I get the error message "GfxUI has stopped working" when you click on "Options and support" in the Intel graphics card and the Media Control Panel.

  Everything works well except this problem, forbidding me to access this menu.

  Some details of my system:

  -Laptop: HP Elitebook 8470p B6P90EA #B10 (16 GB of RAM)

  -OS: Windows 7 Ultimate x 64 (service pack 1)

  -J' have Microsoft.NET framework 3.5.1 active (default value of Windows 7)

  -J' installed Microsoft.NET framework 4.5.1

  Some attempts at solving problems (with no success), I did:

  -Uninstalled and reinstalled video driver;

  -Microsoft.NET framework 4.5.1 uninstalled and reinstalled the driver video;

  Can someone help me to solve this issue, please?

  Here is the response from the INTEL Support:

  I'm sorry to hear that have had problems with the Intel graphics driver.

  This problem has been reported previously, and Intel has fixed with the new drivers.

  Please see the link below for more information on your problem:

  http://www.Intel.com/support/graphics/sb/CS-009483.htm

  Here is the link for the latest video drivers:

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y & DwnldID = 23405 & lang = eng & OSVersion = Windows % 207% 20 (64-bit) * & DownloadType = drivers

  HP will update this version of the problem driver too, based on the INTEL update?

• using win vista sp2 64-bit overpriced home, the catalyst control center host application has stopped working

  Using windows VISTA Home overcharging sp2 64-bit, the catalyst control center host application has stopped working

  Hello

  You will need to download the correct drivers for the graphics card. You can also contact the manufacturer for assistance on this issue.

  Support for drivers &

  http://support.AMD.com/us/pages/AMDSupportHub.aspx

• All programs win explore has stopped working

  When I opened my pc that it says windows Explorer has stopped working, the trend has stopped rederz.exe work has stopped working and all programs stopped working what is the problem?

  Hello

  Start with, there is no file called rederz.exe in a Windows installation or any software that I can find in a quick search. If the file name is correct and that you have not created yourself, you are probably infected by a virus any. I start in safe mode and focus on the two deleting the file and boot entry that loads. Trend should not work in normal mode, because the bug is loading and actively holdouts, who could explain easily why he and the Explorer shell stop working.

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• My new records button has stopped working. How can I fix it? Win 7

  I run Windows 7 and my new records button has stopped working. How can I solve this problem

  Click Start
  Type: CMD, according to the results, right-click CMD
  Click on "Run as Administrator"
  At the command prompt, type: sfc/scannow

  This will check for any breach of integrity

  Restart your system

• After the update to the latest version of iTunes, it includes the error message 'Push Apple has stopped working' and ITune could not be started

  iTune cannot be started on Win 7 after recent update with error message "Push Apple has stopped working"

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach. Review other cases and a list of documents to support further down the page, in which case one of them applies.

  More information area has direct links with the current and recent if you have problems to download, need to revert to a previous version or try the version iTunes for Windows (64-bit-for old video cards) as a workaround for the problems of performance or compatibility with third-party software.

  Your library must be affected by these measures, but it is also related to backup and recovery advice if necessary.

  TT2

• Utility power management Portege A100 has stopped working

  The power management utility has stopped working and when I try to save the profile of Laptop/portable power management screen control panel I get a message saying that the power cannot be defined as two revision levels are incompatible.

  I tried to remove and reinstall the Power Management Utility and utility Toshiba but when reinstall I get a fatal error notice and the 0x51A error code. Can anyone help please?

  I suspect that this problem could have been triggered by an update XP or Norton Internet Security.

  Hello

  Maybe the registry is confused upward
  Try to clean and repair the registry using CCleaner. It the free tool.

  Firstly uninstall the energy saver, then clean the registry.
  Download page of the European driver Toshiba Portege A100 Win XP tools and drivers.
  You will need:

  Common module-> must be installed first!
  Energy-saving

  Good luck

• Parallel port has stopped working on my A30

  I have an A30 with Win XP pro sp2. Recently disappeared from my DVD player and also my printer has stopped working. I reinstalled DVD Tosh tools and it is now working again, but I am unable to get the parallel port works again. I have it active in the Bios (worm 180.) and also in the control panel. He started to drive me crazy.
  Is there a tool to test the Lpt1 port or someone else has found a solution to this problem?

  Hello

  If does not work reinstall the drivers, I think you should try to recover the entire system. But don't forget to backup your important data. Sorry I can't give you better advice.

  Good bye

• Satellite L770 - ethernet adapter has stopped working

  Hello
  I have three laptops all connectable to my home hub, but I seem to have serious problems with the latest model, L770-13D. The signal strength has never been as good as the older models, and most recently the Ethernet adapter has stopped working. I have updated drivers on the two adapters, but it did make a difference. I recently updated my connection and I wonder if the Ethernet adapter is not configured correctly because it was working fine before the upgrade.

  I also tried almost all the tests I can do - Toshiba config doctor returned a FAILURE on the verification of the material that I did, but the device manager says that the two network cards work OK. Also, troubleshooting reports wireless adapter that it "can be a problem", the evidence seems to be directed towards a hardware problem with this laptop.

  Any thoughts?

  Have you noticed this Ethernet problem on the first day? Otherwise, I recommend you to reinstall the OS using original recovery image and test once more with the factory settings. Recovery image contains the drivers right and tested. It is also configured to be used immediately after the first start, so it shouldn't be a problem.

  Have you ever done this?