Win 8 the Action Center Maintenance flag shows all the time.

Similar Questions

• Action Center is out of control

  I have reinstalled Windows 7 64 on my HPE-510 t.

  Everything works fine, including Laserjet P1006 and Deskjet 3050 printer and the USB controller.  Test the pages look beautiful.  Drive external drive has no problem talking to the computer.

  I have this icon of the persistent Action Center telling me the printer drivers and the USB driver must be installed.  So I installed the driver laserjet three times, twice deskjet printer driver and USB driver once. Everything works well, as far as I can tell.

  Why don't this recall Action Center and it's all small yellow triangle!  Go away?  I can't think of what I have to do.

  Does anyone have advice?

  Richard

  Hi rich,

  You can try this:

  Right click on the Center of the Action in your taskbar and open it > Change Action Center settings >

  Under 'Maintenance Messages' > UNCHECK "Device Software" > OK

  
  Disable any other thing that is bothering you.  The service here's help; If it makes you crazy, this isn't helping.  The smile.

• I can't use windwo Defender, my pc show if you use another application to find the unwanted malicious software, use action center to cheack app status

  "I can't use winddow Defender, my pc show' If you use another application to find the unwanted malicious software, use action center to cheack app status."
  Please help me solve. Thank you

  Hello

  If you use Norton, AVG, Avira, Microsoft Security Essentials, McAfee, etc. the default action is for Windows Defender must be disabled, that these AntiVirus programs have their own Antispyware Applications.

  There is nothing to worry.

  Using both programs at the same time can cause system conflicts, etc.

  If you are using one of the above AntiVirus programs, this Information from David O - Support Engineer shows you how to manually enable Windows Defender (disregard information from uninstalling; not possible in Vista):

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/how-do-i-manually-start-Windows-Defender-in-Vista/dab845b2-9ba5-47F3-9518-c4c6781e7d5b

  "Go to start, Control Panel, Administrative Tools, Services. Look for Windows Defender.

  Right click and select Properties , ensure that Startup Type is automatic.

  Once modified, click apply and OK.

  Quit and restart your computer. Check the back take the same path to confirm that Windows Defender has started"

  .

  If you want to have additional protection against malware using the version FREE of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  And for now, change startup Vista programs without using Defender, use one of these methods:

  "How to use MSCONFIG in Windows Vista"

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  Or the program Autoruns for FREE:

  "V11.21 Autoruns for Windows"

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  See you soon.

• In the windows 7 Action Center shows off windows Security Center

  In the windows 7 Action Center Watch windows Security Center disabled. I tried to turn it on, of SERVICES [automatically]. But after sometimes it becomes disabled automatically, use Antivirus, McAfee SecurityCenter. It is up to date and a license.

  Hello

  ·         You receive an error message when the windows Security Center is turned off?

  Method 1:

  I suggest to temporarily disable the Antivirus on the system and check if the problem persists.

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Once you disable the antivirus software follow the steps below to start the Windows Security Center service.

  one) to access the console type Services in the search field and press ENTER. You will need to click on continue if you are prompted to open the Services window.

  (b) in this window, you must locate the right-click Security Center service, now select Auto and select start. When the service fails to start, you will receive an error message.

  Note:

  Disable the software Antivirus is a potential threat to the security of the system, I suggest you to activate the antivirus as soon as you have completed the troubleshooting steps.

  Method 2:

  Try to perform a system online virus scan to check the malware/virus infections. The online virus scan will automatically scan your system and remove any potential threats caused by a virus/malware.

  See the link provided below to launch the Virus Scan online.

  http://OneCare.live.com/site/en-us/default.htm

  You can also use the center of McAfee Security installed on the system to check any infection of virus/malware on the system.

  Method 3:

  The problem may also be related to the damaged user account that so I suggest to create a new user account and check if that helps resolve the issue.

  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

• Warnings from Windows 8 Action Center that McAfee and the Defender is not activated after Windows update.

  In December 2012 after installation of the updates of Microsoft Windows on my machine Windows 8 and rebooting, my icon downtown Action system gave 3 warning messages:

  The spyware, antivirus and Firewall wasn't turned on do not.

  When I was in the center of the Action, he said time Windows Defender and McAfee have been disabled.

  I ran Mcafee checks as well as the defender and it states that my machine is virus-free.

  I clicked on Mcafee and it said all were lit.

  I called Mcafee technical support and they did something in December 2012 and has solved the problem and none of the messages is new. They do not just turn off messages in December 2012, they did something, but wouldn't discuss what has been done with me.

  However, today, Jan 8/13, another set of Windows updates have been installed by Microsoft and yet once again, the WARNING messages 3 came.

  I called McAfee support again and said that I didn't call each month when I install the updates of Windows to solve the problem and that there is a bug with Windows 8 and McAfee.

  I looked at the tech of McAfee as he did helpline (I work in technical support as well) and what he did this time was to turn off Action Center messages, thinking that I DINA realize that it was not really solved the problem.

  I told him, I understand that it seems that McAfee is not working properly, but I will not renew my McAfee Dell subscription this March/13 because that doesn't solve anything... it's just disable the warning messages. (I showed her that if I turn on the message, the warnings were still there... apparently he was shocked that I knew what I was doing).

  He said that McAfee is a problem with Windows 8 and McAfee and are working on a fix.

  The tech told me to get in touch with Dell and they would provide a fix.

  This problem does not occur with my Alienware Windows 7 pc and installation of Windows 8 I received is on my other pc from Dell.

  Is someone can you please tell me if there is a fix for this?

  I will not renew my McAfee subscription if it comes to the type of service that will be provided; I'll go with another antivirus program.

  Thank you

  

  

  
  

• Windows 7 Pro Action Center shows current backup permanently

  Windows 7 Pro Action Center shows current backup permanently, even if it's not, I don't have a backup set and Backup and Restore cannot find a backup.

  Why can't Microsoft find a solution to this problem with the network or the corrupted/missing files? My system works fine even with this problem of current backup. So, I learned to forget. But it would be nice if Microsoft would solve this problem.

  Hi flintnodule,

  Microsoft can and will fix the issue for you, but because it involves dircet contact with the troubled pc the only way to do it is through remote assistance. that is to call you Microsoft and allowing the tech Advisor take control of your pc directly. THS can lead however still other problems that not all advisers have the same stanard in cognition, (I'm talking about previous experiances). That's why I stated measures for any user to repiar this problem themselves in over the answer, but for some reason not to many are eager to make they perfer to ignore the help and just complian. the way I used overkill stages of difficulty was the following. 1. removal of devices connected, 2. back up the system and all the files, 3. Defragment os. 4, everthing unistall, which is the third part. 5, prepare an external hard drive for windows by labelling and re-formatting upward (note do not quick format). 6, clean, install windows 7 but use the options to format your drive first. 7, do not install anything just to configure windows 7 to your configuration (test performance and reliability monitor if all ok). 8, perform an upgrade and after what game action center full tuning IE levels all the recommended and send information to all users. and set performance and reliability thanks to (allow) windows firewall. 9, Center of action for perform a full upward and the image of the value system and set it to your external hard drive. 10, test of reliability and performance monitor, once everything is ok and the Action Center indicates that it is active and there is no problem, you are ready to reinstall all of your software for your backup you make early.

  hope this helps

  your

  ASHLEY No.: 1 FAN OF MICROSOFT AND WINDOWS 7 do not forget if you tick the response as correct, vote for him as useful to help other users find a solution faster

• How can I get rid of the small window of Action Center?

  How can I get rid of the window of Action Center? I read Center wants to tell me what action and you click on the x in the upper right of the window that appears when you open the center of the action, but I have a small window at the bottom right which is above any other window, and I want to get rid of it. It is not an x or a close button. How can I get rid of this horse?

  Before this problem, when I started to Win 7 me a choice of normal startup or a 'safe mode' start because he thought that I had recently installed a device that caused a problem. Windows tried to solve the problem but says have failed, and then I was able to start windows normally. I have not recently (last days) installed anything, but the PC is about 2 weeks old, and I have installed things like an external usb drive, a printer, a flash drive, an mp3 player and a wireless mouse.

  Maddog1381,

  Check out this TechNet article that describes how to disable the pop-ups Action Center:

  http://TechNet.Microsoft.com/en-us/magazine/dd492018.aspx

  I hope this helps!

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 7 action center > security > I can't change the uac user account at the level of the control window freezes / uac rest!

  PROBLEM: ACTION CENTER > SECURITY > USER ACCOUNT CONTROL FREEZES AND REMAINS OFF - I CAN'T CHANGE THE UAC LEVEL. When access to the center of the Action (Windows 7-32 bit) > Security > UNDER USER ACCOUNT CONTROL IS OFF > said UAC will be NEVER NOTIFIER > and below it in blue is the option to click on "Choose your level of UAC" > I click it and it opens a window "DECIDE if he MUST BE INFORMED of CHANGES to YOUR COMPUTER" with a feature of landslide to choose the level > I DRAG to ALWAYS NOTIFY ME AND EACH TIME the SCREEN is IT FREEZES LET ME HIT OK - so I can not change this setting. It won't let me change to always warn me - the recommended setting, and I can't go beyond that! The window closed either! I'm trying to close the window by clicking end task in Task Manager - it takes several attempts before / if it can close this frozen window... BUT THE KEY IS THAT I CAN'T CHANGE THE UAC LEVEL - THE SCREEN FREEZES AS SOON AS I GLIDE TO ALWAYS WARN ME - HELP? * NOTE: a few times after the Task Manager tried to close the window without success, I saw a box pops up that says: Manager of COM surrogate has stopped responding... he tries to fix - as if Windows stops responding, and he tries to recover or fix the problem. I would like any help or information please, as to why I can't change this setting, even after I give an administrator password, you are prompted, to say good make - when I am logged in as a standard user. Help? Thank you!

  Hi Shellzak,

  Thanks for posting this question in the Microsoft Community!

  I understand that you can not change the UAC settings on the computer and the system hangs. I'm sorry for the inconvenience caused to you. Rest assured that I will do my level best to help you.

  Did you of recent changes to the computer before the show?

  I suggest the following method and check if it helps to solve the problem.

  I suggest you try to activate UAC from the command line and check if it helps.

  (a) open an elevated command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  (b) run this command

  Reg.exe ADD HKLM/v EnableLUA /t REG_DWORD /d 1/f

  Registry warning: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://support.microsoft.com/kb/322756/

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

  Kind regards!

• Action Center says it has detected potentially harmful software and won't show me what it is or I solve.

  Action Center says it has detected potentially harmful software and won't show me what it is or I solve Windows defender is to come clean and so security micro scan

  Original title: Action Center

  I recommend that you run Disk Cleanup or cCleaner to remove temporary files as this will reduce the time to scan security software.

  Start the computer in safe mode with network and download and install Malwarebytes (free version for individuals only), updated definitions and run in normal mode. Disable other security software while you do the analyses.
  http://www.computerhope.com/issues/chsafe.htm

  http://www.Malwarebytes.org/products/malwarebytes_free http://helpdesk.Malwarebytes.org/Entries/21892442-should-I-Scan-with-Malwarebytes-Anti-Malware-in-Safe-mode-

  Download and run SuperAntiSpyware (Free Edition)
  http://www.SUPERAntiSpyware.com/download.html

• Cannot change anything in the action center error code and the blue screen and stops.

  I can't do anything on my computer with windows7 can not install updaets or sofyware of security I get an error code and the blue screen and stops

  OT:everytime I try to change anything whatsoever in the action center ndour windowws blue security and my computer shuts down

  Hey Chrisb,

  You did changes to the computer before the show?

  Step 1: I suggest to start the computer in safe mode and check if the problem persists.

  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2: If the problem is solved in safe mode, then I suggest you perform the clean boot and remove the program that is causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: Follow step 3 of section of boot KB929135 to reset the computer in normal mode.

  Hope this information is helpful and let us know if you need more assistance. We will be happy to help.

• How to restore Win7 backup on the new system and drive Action Center repair after disk crash

  I have a Dell which took a 64-bit disk crash.

  I created there is not long from the center of the Action, a disk repair and backup of the C: drive on a backup USB 1 TB drive.  These two events has been made by the Windows 7 Action Center.

  I have a new installation disk in the system to replace the one that crashed.

  Is it as simple restore system on the new drive that boot from the ERD and then recognizes the USB disk and backup file Action Center?

  My hypothesis is the combination of the ERD and backup Action Center will bring my system to date content calendar when they were created?

  Problems to watch?

  If your image is on a connected USB external drive, you may need to install a drive to the external hard drive in the installation process.  So you should find a driver for it and store it on a USB key so that you can install it when asked.

  Starting the system on the ERD is simple and still works.  Just press F12 at first then select the DVD drive and click Yes.

• Cannot open the message of solution in the Action Center in windows 7

  I got the solution in the windows 7 Action Center, but I can't open it. I don't know that my internet connection is good. How can I get the message of solution? Thank you.

  Same here, but I can have a work around.  Had a Windows 7 BSOD twice in a week.  Both times the Windows Action Center reported that he had a solution, but when I clicked on the link to view the solution, the Details of the Message screen says he was unable to download the solution and told me to check my Internet connection.  Clearly not the problem.  I clicked on the link "see all the problems that this applies".  Check-video equipment 2 errors and the other "stop unexpectedly" (BSOD).  Workaround: in an event random dumb luck, I clicked on the back arrow at the top of the Action Center to return to the display of the details of the Message, and as if by magic, instead of the same message on checking my Internet connection, it displays the solution!  Now, don't get excited too - the proposed '' solution '' is not really a solution for the BSOD or apparent problem with the NVIDIA graphics card.  Here you go:

  A problem with the NVIDIA graphics driver

  NVIDIA Graphics Driver has stopped working properly.

  An update of the driver, as appropriate, could prevent this problem does not happen.

  There are several ways to find and install the driver updates, but it's best to let Windows do it for you. Try the step below, which describes the process. If it does not produce a driver update that resolves the problem, try the remaining steps in the order shown.

  1. Look for the optional third-party updates

     Even if all the critical updates have been installed on your computer, the optional updates may be available for NVIDIA Graphics Driver, who have not yet installed. Here is how to use Windows Update to find and install the updates driver option:

     1. Click here to open Windows Update in Control Panel

     2. In the left pane, click check for updates to see if there are any optional updates available for your computer.

     3. If the optional updates are available, click the link to view and select the updates to install. (If you don't see this link, you may need to clickSearch online for updates from Microsoft Update).

        If no optional updates are available, go to step 2.

     4. Select the optional updates, you want to install (especially if they seem to be related graphics), clickOK, and then click install updates.

  2. Try to manually update the NVIDIA Graphics Driver

     If no optional NVIDIA Graphics Driver update was available in Windows Update, you can try the NVIDIA Graphics Driver update manually.

     Note
     It's best to let Windows automatically installs the drivers for your hardware, as described in step 1 above.

     If you decide to manually update the NVIDIA graphics driver, here's how:

     1. Click here to open the Device Manager if you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

     2. In Device Manager, double-click display adapters, and then double-click the name of the NVIDIA Graphics Driver device running.

     3. Click driver , and then click set to update driver.

• When asked how you want to search for driver software, click search automatically for updated driver.

• Windows locate and install a new driver, if available.

• See the NVIDIA Corporation Web site for driver updates

  If no optional NVIDIA Graphics Driver update was available in Windows Update, go online to the following site to check for driver updates:

  Click here to go to find out if a solution or an updated version is available online on the website of NVIDIA Corporation

How to upgrade manually a pilot using a file downloaded

1. Click here to open the Device Manager

2. In Device Manager, locate the device you want to update, and then double-click the device name.

3. Click driver , and then click set to update driver.

4. Click Browse my computer for driver software.

5. Click on the Browse button and look for the folder that you saved on your desktop.

6. Select the folder that contains the driver files.

7. Click OK, and then click Next.

8. Follow the instructions to complete the driver installation.

Note
If you run the latest version of the NVIDIA graphics driver and you still experience the problem, we recommend that you contact NVIDIA Corporation or by the manufacturer for support, and additional information.

• Visit the Web site of the manufacturer of your computer for driver updates

  If NVIDIA Graphics Driver was preinstalled on your computer, check the Web site of the manufacturer of your computer for driver updates.

  How can I find the manufacturer of my computer?

  Click on the Start button , typemsinfo32 in the start search box and press ENTER. The manufacturer of your computer is listed as themanufacturer of the system in the right pane of the system information window.

  Click here to go online to see the contact information for most of the computer manufacturers

  How to upgrade manually a pilot using a file downloaded

  1. Click here to open the Device Manager

  2. In Device Manager, locate the device you want to update, and then double-click the device name.

  3. Click driver , and then click set to update driver.

  4. Click Browse my computer for driver software.

  5. Click on the Browse button and look for the folder that you saved on your desktop.

  6. Select the folder that contains the driver files.

  7. Click OK, and then click Next.

  8. Follow the instructions to complete the driver installation.

What is a driver?

A driver is software that allows your computer to communicate with hardware or devices. Without drivers, the hardware you connect to your computer (for example, a video card or a webcam) may not work properly.

• Action Center keeps telling me that Bullguard firewall or antivirus AI swiched off the power.

  Action Center keeps telling me that Bullguard firewall or antivirus AI swiched off the power. I check bullguard and everything is ok. What is going on?

  Dear rt00

  Please note that when you start your computer, it loads first your operating system (Windows), then other applications that are set to run at startup. Depending on the amount of RAM that your machine and also on the number of programs that need to be loaded, this process can take a long time to complete.

  Because at the start of Windows Security Center modules of BullGuard are still waiting for Windows to load them (through the svchost process), it signals that you are not protected. This warning should fade after a few minutes.
  If this isn't the case, I recommend that you contact us at http://www.BullGuard.com .
  Best regards
  BullGuard support team

• The action center that says software potentially harmful detected

  Original title: error message of the action center

  I get a message in the center of the action that said potentially malicious programs detected - when I click on see details or fix, nothing happens

  Hi Sru,

  I appreciate the efforts that you put to publish the query on this forum.

  You did changes to the computer before this problem?

  This could be due to malicious software or viruses present on the computer.

  I suggest you analyze your computer Microsoft Safety Scanner, it will help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Important: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Please let us know about the results. We will be happy to help you come.

• Problem with the Action Center

  I have a problem with my NVIDIA Graphics Driver and Action Center said he found the solution, but it cannot be downloaded because it could not connect to the internet. The message is this:

  "Your computer was unable to download the solution at this time. Make sure that your computer is connected to the Internet and then try to download the solution later. »
  Of course, I'm connected to the Internet, so I don't know what to do. In any case, the problem is that whenever I play Starcraft 2 or Skyrim, the program crashes and I don't know why. I have already installed the graphics driver, but it keeps crashing.
  Thanks for your help :)

  If you have a large box PC machine, Dell/HP or laptop, for example graphics drivers are obtained from this manufacturer of PC, not Nvidia or windows Update