Win7: I want a total and absolute control on my Admin account. It seems impossible.

Similar Questions

• Place the Parental control over the Admin account

  I use a Macbook Pro with El Capitan 11.1 2012

  Today, I put Parental controls on my admin account, which resulted in the managed account. I can now use my normal administrator username / combo of password to remove it. I tried everything I found on the Internet, including into single user mode and create a new account to change to leave, but the code didn't work in my case.

  I was wondering if there is any easy solution or new thoughts there for this OS...

  Also why it not easier? Or at least a warning? Looks like Apple could have come up with something after that it was produced for the years.

  Please take these steps to restore the privileges on your account. This somewhat tedious procedure is only necessary if you have verified that no work administrator account exists on the system.

  If you do not already have a current backup of all your data, you must back up before taking any of the steps below. Ask if you need advice. You won't need the backup unless something goes wrong, which is always possible.

  Step 1

  Start in recovery mode. The OS X Utilities appears.

  Step 2

  This step only if you use FileVault 2. Start utility disk, then select the icon for the volume FileVault startup ("Macintosh HD", unless you have given it a different name.) It will be nested under another icon of the disc. Click the Open button in the toolbar and enter your login password when you are prompted. Then quit disk utility must be returned to the main screen.

  Step 3

  Select

  Utilities ▹ Terminal

  in the menu bar. In the window that opens, type this:

  resetp

  Press the tab key. The partial order you entered will automatically end this:

  resetpassword

  Press return. Opens a window to reset the password. Select your boot if not already done volume. Pull down the menu option

  Select the user account

  and select

  Administrator (root)

  Follow the prompts to set a password. It is safer to choose a password that includes only the characters a - z, A - Z and 0-9. I suggest that you write the password. If you don't write it down and forget about it, you will start again at step 1.

  Select

   ▹ Reboot...

  in the menu bar.

  Step 4

  This step, as step 2, applies only if you use FileVault. Sign up as usual, then select

   ▹ Disconnect...

  from the menu bar or press shift-command-Q key combination. Do not restart. You go back to the login screen.

  Step 5

  On the login screen, click on the other... Enter 'root' (without the quotes) in the name field and the password set in step 3 in the password field. You should now be logged in as root. It is a potentially dangerous situation. Do nothing by being logged in as root except as indicated below. You'll be fine as long as you don't dismiss the plan.

  Open the preferences users and groups window. Select your usual administrator account from the list of users and check the box marked

  Allow the user to administer this computer

  You will be prompted to restart. Do this and log in as yourself, not as root. Your administrator status should now be restored.

  Step 6 (optional, but recommended)

  Follow the instructions in this article to support under the title "disable the root user. You must authenticate in directory utility as a 'root' with the password set in step 3. As another administrator authentication will not work.

  Credit for this idea of NCP member wessongroup.

• Parental control on the Admin account problems

  A few months ago, I created a new account on my computer for work only.  I set the parental controls on the new account and only the work account.  I got by without my computer for work then off the parental control.  Now, I'm unable to download games without him asking for a password.  I don't know what password I had used since I don't end up need it and none I've tried have worked.  So, how can I, as an administrator, disable this feature?  I have consulted the parental control and done everything I have seen/read that was recommended, but it won't allow me to change the settings on my own admin account without establishing a second admin account.  So, how can I remove this feature from the admin, only the admin?  It does not accept any next to the admin account, and even then it won't take my password.

  I work at it for a few weeks now and tried everything I can think of.  Today I spent most of the day trying to get this thing to work.

  More details on what is happening-
  -I'm going to download a game on the net while connected to my admin account
  -Everything works until the final stage when he usually asks for a general permission to my antivirus
  -A pop up appears which reads: you do not have the necessary permissions to use all the features of the program you are about to run.  You can run this program as a different user or continue to run the program as long as the current user.
  -Click on the current user and it closes, download fault.
  -Enter a password for the administrator and it says I have a user name or password invalid.
  -Enter my username and password and it closes, download fault.

  Can someone please help with this?

  Hello KS. GAL.86,

  Is the problem with the account of the work that you had created that has activated the Parental control? You can only configure Parental controls on a standard account and not an administrator account.

  If so, then create a new account that has not activated the parental control.

  Is the issue that you are experiencing that you can not download programs as an administrator?
  What is the exact error you get when you download a program?

  It cannot have anything to do with Parental control.

  Please answer back with more details and information.

  Thank you

• Cannot change the parental control to my admin account. Error message

  When to my admin account, I was able to turn parental controls for UAS oin my children, but when I try to change the programs and other whatnot (so my 5 & 3 years can not access to Quickbooks, etc!) I get an error message saying ' impossible changes to parental controls settings. "  If the problem persists, see your system administrator. "Computer is not on a network and with hunting 4 children I just can't find the time to sit down and understand the problem.  Help!

  http://www.bleepingcomputer.com/tutorials/tutorial139.html

  Link above has a very good tutorial on how to set up Parental controls.

  http://www.Vistax64.com/tutorials/95139-parental-controls-Setup-use.html

  Also, read the tutorial above and the 'Related links' tutorials to vistax64.com.

  Both of the above are very good tutorials for any problem with Parental control.

  See you soon.

  Mick Murphy - Microsoft partner

• I want to access and control my other laptop with wifi.

  * Original title: remote access

  I don't know anything then please help me from 0. I want to access and control my other laptop with wifi. I don't know where to start? Please?  Reference Dell w7 while the other is toshiba w8.

  (Moved from devices and drivers)

  You can do this with Remote Desktop.

  These can be useful:

  Remote Desktop connection: frequently asked questions

  The application of remote desktop help

  Remote Desktop in Windows 8

  John

• Satellite A200-1VP - Trackpad and the control volume

  Hello

  for the first time posting here so apologies in advance if I posted this topic in the wrong place or have not included all relevant information.

  My question is about a Satellite A200-1VP I bought recently from a friend. Model number PSAE6E-08D02YEN. The laptop has been completely annihilated and installed Windows 7 Ultimate before being redeemed.

  This seems to have brought the track pad and volume control to stop working.
  Are there drivers available that I could try to help to solve this problem?

  Thanks in advance.

  Hello

  I checked on http://www.toshiba.eu/innovation/download_drivers_bios.jsp Toshiba download page, and as I can see it, your machine is fully supported for Win7 32 bit, so you need to do is install all available drivers, tools and utilities.

  What version of operating system are you using (32 or 64 bit)?
  You have installed all the drivers?

• Management of user accounts and Parental control in Windows 8

  Hello

  I'll post a thread on how to manage the user accounts and Parental control in Windows 8.

  A user account allows you to connect to Windows 8. By default, your computer already has a user account that you have been
  needed to create when you configure Windows 8. If you want to share your computer, you can create a separate for each Member of your household or office user account. You can also choose to associate any user account with a Microsoft account. Signature with a Microsoft account will bring all your SkyDrive files, contacts and more in the start screen. You can even connect to another computer that has Windows 8 and all your important files will be there.

  Here is a video on how to manage the user accounts and Parental control in Windows 8.

  Also, here is a document showing you how to manager Our user on Windows 8.

  If you have any questions let me know.

  THX

  I hope it's useful.

  THX

• How can I move these indicator and the control to another page?

  How can I move these indicator and the control to another page? I page Kontrol and those on Installningar page, move!

  Or I want to hide them Kontrol page, how can I do

  Thank you

  Hi q8.

  move: select the controls, move them out of the container tab, drag them into the appropriate page of the tab container

  Hide: Terminal controls (!) right click, select "hide"...

• I built in webcam but you want to install and use a second. Is it possible to where both are used at different times?

  I am wanting to install and use a different webcam sometimes but I have a already built in. I installed the other cam.but it says device cannot be used or already in service; I'm guessing that because I already have a cam. Is there a way I can do and use them both at different times?

  Hi Texaslovely

   

  You cannot capture images using two webcams at the same time. You can try to disable a webcam from the Device Manager, and then try to use the external webcam. See the steps below to disable a device-

  a. go to Device Manager, open the Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation

  b. in Device Manager, look for the device and if you want to disable, and then double-click the device, and then click Driver tab and click on disable.

  I hope this helps.

• I want to update the digital control by pressing a button

  Hey,.

  I'm in Labview 7.1

  So I have a problem that seems like it should be very simple, but I have questions.

  I want to increment a digital counter when the user presses a button to save their data, but labview allows only a digital output counter and not all take to the.

  I want the variable a numeric control so that the user can increment/decrement it themselves if they feel the need to revive or ignore a number of test.

  All solutions?

  Thank you

  
  

• Limit the control panel and IE for the Standard user account

  I'll set up a new computer for a 91 year old customer in a retirement home, who don't use the computer for e-mail and an occasional Wordpad document.  His son wants to put computer in place so that it cannot get to the Internet Explorer browser, or go to control panel, because he bumbles around the keyboard causing all sorts of problems requiring frequent service for me calls.

  The operating system is Windows Vista Home BASIC, so gpedit.msc is not installed.  I have activated the system administrator account for my use when I am called to repair the computer and set the Standard user to user account.  The problem is that the only way I found to disable IE and the Control Panel causes them be turned off in BOTH accounts.  I wish I could disable them ONLY in the user account.

  The only solution I found to disable the control panel is a registry hack in HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\Current versionpolicies where I put a DWORD 32-bit "NoControlPanel" with a value of 1.  I tried to do that in the HKEY_CURRENT_USER hive, but it had no effect.  This kind of work, but there are two problems then; Mises_a_jour Windows 1) won't install and 2) when I have to go to work on the computer, I first change administrator user, then change the DWORD value to 0 and finally to restart the computer, causing additional assignments, lengthen my time at work.

  Second, the only solution I could find to disable IE was in the default protrams Panel, which disables the administrator as well.

  Can someone tell me if there is another way to achieve this, while IE and control panel are disabled only for the user?

  Change the security to the IE executable rights? Remove 'Users', while you keep the administrator rights.

  For control panel see 'Method Two' in this link:

  http://www.Vistax64.com/tutorials/120951-Control-Panel-show-specific-icons-only.html

  "creacontech" wrote in the new message: * e-mail address is removed from the privacy... *

  Thanks for your response, but will not solve problem of this "gentleman". The object is not so much to limit internet access, as it should restrict access to programs.  He is 91 years old, has small hands and types rapidly with two fingers, but made many mistakes.  Disability is before everything to prevent clikety snap everywhere, because he creates sort of a zillion copies shortcuts of the webpage on his desk, until everything hangs and I have to go a push up on his mess. The same reason applies to the Contorl Panel.  We don't want it to be able to get to the Panel "printers."  When a document will not be printed for a reason, he go, dummy click around and created a bunch of copies of the printer, with a gazillian of documents clogged up in the queue of the coil.  I had to cclear up to 100 documents from the spool on 50 copies printer queue.  It's really an economic problem for his son.

• Troubleshooting slow running under a user account from Win7 machine and normally with the other user accounts on same (or other) third-party app

  Hoping that this is not too off-topic, but I'm really running out of ideas...

  I have this trading program full license (TMPGEnc MPEG Smart Renderer 4.2) who has worked on my Win7/64 for several months, and in recent weeks, has become excruciatingly slow for every user interaction (but not for real computing), making it essentially unusable (1'30 to launch vs 3 normally, 30 "seconds waiting to launch a 'new project' vs.)<1s normally,="">

  When 'pending' launch application or respond to a command, 12% of the full CPU (8 logical cores on CPU Core i7 third Gen) is used by a single process: the offending application (look at the Task Manager, 1 logical core is used to +/-80%, a second for about 15% of this process). All other processes are still at 0% CPU usage.

  Of course, I tried & tested many things including full-/ re-installation of the application with a careful cleaning etc., corresponding registry entries software disabling AV (Avira free), .net Framework Repair Tool, etc... no change! The disc has been checked and is OK.

  Some interesting tips:

  This app worked fine for several months before the problem started abruptly a few weeks; I tried to uninstall .net Framework 4.5 updates to a date prior to the date of beginning of apparent problem, does not; I came back to an earlier version of the offending software: no change.

  But the most interesting observation is that the app works well at the launch of any other user account on the same machine Win7/64 (whether with the normal credentials or admin), so for me that means there should be no conflict of software on the computer, only something in my profile of the main user who causes the app behave so slowly.

  At this point, the Helpdesk of the seller looks distraught - too.

  Suggestions for troubleshooting?

  BTW: I consider that this computer is well managed, and no rogue or untrusted app sleeps there. my main profile is fairly heavily customized for my work, so I want to avoid workaround last resort would be to create a new user account as work environment main (besides the fact that I hate not to find the root cause of the problem)

  Hello

  Given that this problem is specific to the user's profile. I suspect that some programs that are installed or some settings in the profile translates into this problem. You can fix a corrupted user profile by following the steps in this article:

  http://Windows.Microsoft.com/en-us/Windows/fix-corrupted-user-profile#1TC=Windows-7

  I hope this helps.

• I want my standard account work and delete the Admin account.

  When I got to the computer a portable windows 7 I did the daughter of a user name maxewell my keyboard got wet and I had it repaired my password was Danielle livick when I got my laptop back I added Danielle 28 and it of a standard user and deleted maxewell daughter well, in the search bar it shows up , but not in the control panel to remove it, so I don't know why it's there and how to remove and also I made an account administer Danielle 29 and every time I do something on my computer a thing with Danielle 29 and he asks me a password then when I did the admin account , I didn't put a password I tried to remove it and it won't let me all I want my standard account 28 Danielle and delete the admin account, but I can't help me please

  Original title: Hi I have a windows 7

  You must be at least one account Admin on the PC.  It's just the way that Windows 7 works.

  The account that you used to make the new Admin account must also be an administrator full - account only administrators can make new accounts.

  Of running Windows 7, it is recommended to use a user account Standard for all daily activities.  In addition to that, make two password protected administrator accounts & write passwords.  Make a password reset disk for each account on the PC.

  On the removal of Maxewell girl - the account is deleted [this is possible by an Admin]

  1. go to the daughter of C:\Users\Maxewell's and copy all the files of this user that you want to continue

  2 using Control Panel, user accounts, manage another account.

  3 you can then remove the entire Panel Contorl system, advanced system, Advanced tab settings user profile, select user account profiles - settings button - then click on the button Delete

  4. go on girl C:\Users\Maxewell's and verify that the files are deleted

• In the mail app, if I try right click and open the attachments of the JPG files that I received, I get the message 'we are unable to open this file. You want to save and try to open with another application? »

  I received an email with 3 accessories, 2 images and 1 PDF.  I am trying to open larger photos and I get the message, "we are unable to open this file.  You want to save and try to open with another application? »

  Why can't click a picture in the mail app and have it launch a photo viewing application. ?

  What you need to do is to go to control panel > programs > by default of the programs > set your default programs. Or search for programs by default, which must raise I have right as well (just start typing on the splash screen or slide from left to right and click on the search button). Go to the photos and select set this program as default. This fixed it for me.

• Only for the repetitive Elements I want to total

  Dear all,
  Please help me in this report
  
  ONC Est.Amt paid Amt
  C1 150 125
  C2 800 710
  C2 100 100
  C3 200 190
  C4 150 130
  C4 350 225
  C4 500 380
  C5 750 680
  
  I want the total for item only periodic just below the item as below
  
  ONC Est.Amt paid Amt
  C1 150 125
  C2 800 710
  C2 100 100
  total of 810 c2
  C3 200 190
  C4 150 130
  C4 350 225
  C4 500 380
  c4 735 total
  C5 750 680
  
  Thank you
  REGI

  Hello

  In your data model, you will need to have the request of master / detail.
  At the master, you will have: ONC. In the details, you will have the rest of the fields.

  You can create a function in the master, which counts the number of records for each NOC and another which calculates the sum at the level of the ONC.

  In the page layout for the entire field of ONC, add a trigger of format like this:
  If: count_function > 1 then
  Returns true;
  on the other
  Returns false;

  This will achieve what you want.

  Kind regards
  Alex

  If someone useful or appropriate please mark accordingly.