Win7 not genuine-now what are my options?

Similar Questions

• First peut Elememts 3.0 for Windows XP running on Windows 7 or 8? If this is not the case, what are my options?

  First peut Elememts 3.0 for Windows XP (which I have again in the box) running on Windows 7 or 8? If this is not the case, what are my options?

  Nevermind, I figured it with the help of 1 855 556 6777.

  The answer is YES it will work.

• portable computer does not support. Yet battery monitor says "plugged in, not support.» What are some options?

  my laptop is connected, and yet power monitor says "plugged in, does not support." What are some solutions?

  Hi Joseph,.

  Something similar just happened to me. The first time they fixed it, they have replaced the adapter and the problem is solved. 5 months later it started to happen again and this time they replaced the battery, the motherboard and the milling table (thanks to heaven, it is still under warranty). Fortunately, thanks to the new adapters, battery started to load and the experience does not seem to damage it in any way (but you should keep your eyes on it anyway just in case).

  How they were able to say on my laptop - a Dell E1705 (other than just experience and common sense) was to go into the BIOS (starts, it should be a brief Flash on the screen telling you how to enter the BIOS setup or menu of the BIOS (usually F2) and check the battery information. He showed that the power adapter 'unidentified' instead "90W" list which should be when it is working properly and that the battery was not complete and not charging well plugged. They changed the motherboard and the roll the second time because it could also cause the adapter is not being recognized by the battery (or battery not not recognize the adapter).

  The beep is caused by power and its configured settings to warn you of a low and critical battery condition. In a normal situation, the computer will work right next to the power adapter and does not the battery (it is a way to help maintain the battery life is to run periodically and refill if we leave normally plugged in most of the time). If you remove the batttery entirely, the laptop will power? If this isn't the case, it is certainly at least the adapter or the motherboard. Eventually the battery will get if low, that he's going to sleep or hibernation, or the system stops (you should shut down normally before him to cold shutdown like that). If If, then I expect the tone to go further because it will detect is no longer a low battery charge, because there is no battery - but then you'll want to be sure to use either a battery backup UPS, or at least a surge protector otherwise already in place because if you lose the laptop battery will crash hard and this is not good for her.

  I'm using 32 bit Vista Business SP2 and in Control Panel / sounds / Sounds there is an option for low battery alert. The default to have this. In this case, you can turn off to avoid the beep. In addition, you can go into Control Panel / Power Options, click the plan settings and click on battery. It will provide you with levels of low battery and critical battery and you provide measures to be taken in such a case. If you are unable to operate the system without battery and it is so weak that the alerts began, you probably fell to 11-5% remaining. You can adjust actions to nothing for bass and stop to criticism that 5% is about as close as you want to get to the point where you can hang. Then, you just need to wait until it is repaired and the appropriate parts are replaced.

  Even if you have still some life in it, it is best to contact the manufacturer (they the some have the right parts) or a computer of reputable workshop to get a good diagnosis (perhaps by phone at first), a determination of what must be fixed, the applicable fees, schedule, if it is still under any kind of warranty , and what needs to be done in which order of repair. They can find the adapter is OK and it is just the battery (or vice-versa or two or more). But that's essentially where you need start.

  I hope this helps.

  Good luck!

• No product key for Windows 7 Ultimate on laptop second hand. Windows 8 not compatible. What are the options?

  A friend of mine bought a computer with Windows 7 Ultimate laptop second hand on it and it has not been activated, and it is not a product key (even the old one is worn and unreadable). It was originally a XP system and it cannot be upgraded to Windows 8 because it is not compatible. Is it possible that he could buy a product key so that it is activated and genuine? I don't want him to enter in some affliction, and I feel partly responsible because I was the one who told him to do and was not with him to look over the first! I feel really bad, because it doesn't have a lot of money and I should have been there when it was sold. I have a Windows 7 professional full version box, but I really need for my own system. Are there any alternatives? Please give me some GOOD news because I feel really rotten over this. ) :

  Thank you

  BAT

  The only alternative would be to buy a license Windows 7 Ultimate full version or a version complete edition cheaper such as Windows 7 Edition Home Premium and make a custom installation:

  Full version-

  Microsoft Windows 7 Home Premium

  Full version-

  Microsoft Windows 7 Ultimate

  Apart from that, the only other option would be to contact the computer manufacturer for a Windows XP Recovery disk. Which I doubt they still provide.

• I had to clean my computer & now want to re - install Photoshop, but I can't find the serial number, so don't let me download the program. What are my options if I can't find the number?

  Hello... I had to clean my computer, & would like to reinstall photo-shop. I bought several months ago and can not find where I put the serial number, so I can not download the program. If I can't find what are my options?... Thank you!  :-)

  Your subscription to cloud or serial number to show on your account page?

  https://Accounts.adobe.com/ , then click on Plans & products above to find a list of your programs and your serial numbers

  If the link above does not help you, and you haven't written your serial number on paper to store in your office, I don't know any way to help

• I paid for creative cloud photoshop & lightroom, but it won't let me download because of the incompatibility of the system. NA not ask before payment. I have mac os lion 10.7.5. What are my options?

  I have paid for creative cloud photoshop & lightroom, but can not download because of the incompatibility of the system. I have Mac OS Lion 10.7.5. What are my options?

  1 - upgrade your Mac OS to something compatible

  Requirements for programs of cloud... scroll down and check each program

  -http://helpx.adobe.com/creative-cloud/system-requirements.html

  2 - return to https://helpx.adobe.com/x-productkb/policy-pricing/return-cancel-or-change-order.html

• After careful consideration, today I decided to join Adobe Photoshop CC only to find out that it is not available to me that my laptop has Windows Vista.  What are my options other than having to buy a new computer or an older version like Ps5 or 6?

  After careful consideration, today I decided to join Adobe Photoshop CC only to find out that it is not available to me that my laptop has Windows Vista.  What are my options other than having to buy a new computer or an older version like Ps5 or 6?

  1 can't read on a Windows "upgrade version" which, in my experience, does NOT require you to format your drive... updated on what you have, without disturbing programs installed... at least that's what happened the ONLY time wherever I installed an upgrade version, so I can't give a 100% guarantee that it will work with your computer in this way... search link for all the things Microsoft http://search.microsoft.com/search.aspx?mkt=en-US&setlang=en-US

  2 - depending on the hardware you have, you may not be able to run programs CC well, or not at all

  3 CS6 is 3 years and is the ONLY non - CC version always sold... unless you can find a "legal" somewhere CS5

  Old or used software http://www.emsps.com/oldtools/

  http://forums.Adobe.com/message/1636890 warns of a purchase on eBay

• disk not certified: what are the options

  I just installed a spare drive in my 2900 PERC 5 / i I thought me certified, but is not. It needs to be a hot spare for a RAID 5 configuration. What are my options? It shows as 'foreign' is the physical drives. The only available tasks are blink and unblink.

  Thanks for any advice.

  PS Maybe I should go ahead and order a CERTIFIED disk...

  WD blue is a desktop drive and not would not have been configured on the server of Dell.

  If it's showing foreign and you do not have the option to turn it off, then the drive is bad or the drive is not compatible.  If your other are indeed blue (same firmware), then it's probably a bad drive.  You won't be able to do something with her in a foreign State.

  Maybe you have already disabled the foreign configuration.  It is displayed when you try to configure a new VD?  Is it always show on the screen of physical disks after doing a refresh on this page?

• Now that the utility install cleanup is no longer available, what are my options to uninstall a program that cannot be uninstalled using the standard method?

  I have three programs which cannot be uninstalled using the standard method (Control Panel > Add / Remove Programs); they are Adobe Reader 9.3.4, update of Java 6 and Java 6 update 24. What are my options for removing these programs from my system? I did a search on the internet and all the answers say to use the standard method, or they point to the Microsoft Installer Cleanup (msicuu2.exe) utility. I found sites that claim to have the software available for download, but I am wary of loading the software of a site, that I don't know.

  I have three programs which cannot be uninstalled using the standard method (Control Panel > Add / Remove Programs); they are Adobe Reader 9.3.4, update of Java 6 and Java 6 update 24. What are my options for removing these programs from my system? I did a search on the internet and all the answers say to use the standard method, or they point to the Microsoft Installer Cleanup (msicuu2.exe) utility. I found sites that claim to have the software available for download, but I am wary of loading the software of a site, that I don't know.

  Revo Uninstaller (free): http://www.revouninstaller.com/revo_uninstaller_free_download.html

  The MS Installer Cleanup Utility is available at http://majorgeeks.com/Windows_Installer_CleanUp_Utility_d4459.html , that it is a safe to download site from.  Based on warnings from Microsoft on the cleanup utility, however, you might well advised to make a backup disk image or at least a backup of the registry before using it.  C:\WINDOWS\ERUNT is an easy to use free registry backup tool.

• Given that you have blocked Adobe Flash and I uninstalled as suggested by many commentators, what are my options to see the content I want to see?

  Yet once, now that Adobe's Flash problems are everywhere the news what are my options to display the content on the sites that were previously used by Adobe Flash? I uninstalled Adobe Flash, but need an alternative. Thank you!!!

  Mozilla had 'soft-blocked' version 18.0.0.203 and earlier, which still allowed you will activate Flash on websites of that trust.

  If you are not accustomed to using the "Request to activate" feature with any of your plugins, here's what to expect:

  When you visit a site that wants to use the Flash, you should see a notification in the address bar icon and one of the following: a link in a black rectangle in the page or an information bar slides between the toolbar and in the page area.

  If you see a good reason to use Flash, and the site looks trustworthy, you can go ahead and click on the Lego-like icon in the address bar to allow Flash.

  But some pages use Flash only for tracking or play ads, so if you do not see an immediate need for Flash, feel free to ignore the notification. It will just sit there in case you later want.

  Until this ordeal of previously unknown security flaws shakes, you might want to try this and see how it fits. To set the Flash "Ask to activate", after you have reinstalled it, open the page modules using either:

  • CTRL + SHIFT + a
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click on Plugins. Search 'Shockwave Flash' and always change 'enable' to 'ask to activate '.

• What are my options or what I am doing wrong?

  I have a HP Pavillion A4000. He is supposed to have windows 7, but it was not a new OS installed yet because the motherboard messed up right after the replacement of the HD. He has a new HD and the new MB. My cousin gave up it because he couldn't turn it on after replacing the MB. So I fortunately except the challenge. I got it, and I'm trying to use the recovery disks, as said, except the screen bed "system recovery disks do not support this computer. You are not able to restore this system with these discs. The two replaced where parts HP also. What can I do? Or even better, what are my options with that? This pc is almost brand new, I would really like to get it up and running from my 7 year pc and several completely crashed on me. I am now at my daughters pc and SHH I do not at all! Thanks for any help.

  Hello:

  Yes, you will need to purchase a full version of Windows 7.

  You can go two routes:

  1. a full OEM version that will be good for this PC

  It will cost you less than a full retail version, but once again, once you install it on that PC you will not be able to transfer.

  2. a commercial version that you can remove from this PC and transfer it to any other PC you want.

  W7 Home Premium will be less expensive than W7 Pro or Ultimate for OEM versions complete or full retail.

  The ride. I like NewEgg me.

  Paul

• What are the options for 3 bit for Hw_Arm_Sel in PCI-6601 field

  Hello

  I'm programming our own driver to operate the PCI-6601. For our application, we need option arms material. I know, it is possible to use 2 counters for this, but NEITHER-TIO also supports hw_arm. Although it is not explained in the registration document at all, after some tedious verification in the DDK examples I found that the pieces are in the Gi register metering mode. I know that the position of the HW_enable as well as the position of the 3 options sellect bits PIN. What I don't know is what are the options of 3 bits for Hw_Arm_Sel field. I contacted the support NEITHER, but received no support. How can NEITHER sell boards and when a customer who doesn't use LAbview or Measurement Studio, or DDK, but implements its own driver is then so arrogant at least of NOR? Also, how can OR publish only a part of the records of the Board of support and when a customer contacts and request for some records do not get supported at all? I can't predict the missing records, and he is professional enough to document comes in part from records of 660 x Instruments. And, upon request, you have nothing.

  I hope that someone from the community are aware of this Hw_Arm_Sel 3 pin option. Otherwise, there is just one option of the error and the trial. Or simply throw away the jury.

  Dr. Kirco Arsov

  Hey, sory for the delay in my response. It works and it works very well with the description of Joe and Joe, thanks for your great help. I greatly appreciate. Now we finally also have this option as we wanted it and it works fine.

• I don't have my product code for Windows XP and my Windows 7 disc is an upgrade. I need to install an operating system on a disk without one. What are my options?

  Problem repair a windows installation

  My installion of XP no longer after infection by the virus of Security Center. Without really thinking about it, I decided to do a repair and released my xp disc. It righ through circulated by car and began, which, in my view, was to install a new, not a repair. obtained point of asking the code from the sticker on the computer, I realized that the code provided for an OEM installation not for the disc I inserted and and a code is not generated. I decided to try and install an upgrade to windows 7 that I had on place and needless to say who won, what are my options? and please, do not buy a new install or "linux lol."

  OEM product keys will usually be active even if you use a retail disk to install XP. Simply skip entering product key when prompted and activate later.

  How to activate Windows XP
  http://support.Microsoft.com/kb/307890/en-us

  See the section titled: "how to activate Windows XP by phone.
  Also, make sure that you do not confuse the product key numbers and letters
  (number 8 for the letter B, etc.)

  Blank page to activate Windows in the wizard of Windows Product Activation
  http://support.Microsoft.com/kb/314935

  How to contact a Microsoft Product Activation Center:
  http://support.Microsoft.com/default.aspx/KB/950929/en=us

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Once Windows activated / Genuine Advantage Notifications:
  http://www.Microsoft.com/downloads/en/details.aspx?displaylang=en&FamilyID=afd45b36-3d77-4259-801c-d31a9a90cdcf
  (This tool will confirm that the copy of Windows installed on your PC is genuine and authorized)

  J W Stuart: Http://www.pagestart.com

• What are my options in regard to the validation of my account to send to my alternate e-mail address, but never receieved?

  I use my account Hotmail for years to connect but now Microsoft requires avalidation by code sent to my email address but have not received a verification code. What are my options?

  Hello

  If still problems create a Support case using the link "I have problems receiving or using a security code".  Microsoft support will contact you and help with the issue.

  Contact technical support

• Change HDD to the SSD, what are the options?

  Hi guys, new to the forum, I just bought a thinkpad x130e during a sales event on one of the local retailer, pretty excited, because I like the rugged design.

  I am looking to upgrade to 320G HDD for one SSD 128G... but I have no installation disc 7 windows very practical, so, what are the options for me to install the operating system (windows 7).

  I don't know if there is a way to transfer the whole of the SSD HARD drive? is there a trick to perform? or quite simply, I just bought the new copy of windows?

  COS, I noticed that I have a windows7 pro product key at the bottom of my thinkpad, I kinda don't want to lose money.

  Help, please...

  You don't need to buy another copy of Win7. You will need

  1 SSD. It has to be is not 7mm thick, the most common 9.5 mm thick.

  2 USB box for your HARD drive,

  3. software to "clone" the content of your disk to your SSD. Acronis True Image is a well-respected package that does this. There are also a few free utilities that can do this, however, I'm not familiar with them.

  Procedure:

  1. move the HARD disc on the outer envelope.

  2 put the SSD in the X130e.

  3 reboot from the HARD disk. (You need to interrupt the boot with the blue ThinkVantage button to specify).

  4. install Acronis (or equivalent).

  5 RIP clone disk. You will have to tell the software how you resize partitions because you go to a smaller drive.

  6 restart from SSD.