WIN8.1 & Server 2012R2 resizing disks when Clone - Possible?

Similar Questions

• Language Packs Server 2012R2

  I'm unable to install language packs on the server 2012R2, I no longer get the 775 error using dism, or no valid language pack that is found when you try to use the language pack install tool.  I downloaded the language of 2.6 GB with all languages pack.

  This issue is beyond the scope of this site (for consumers) and to make sure you get the best answer, we need to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• Very slow to load on a Windows Server 2012R2 PowerCLI

  Hi all

  PowerCLI 5.5 is very slow to load on my Windows 2012R2 server, I did a few tests

  Test 1 - load the snap of PS on my worstation (8.1 for Windows 64-bit - SATA hard drive)

  PS C:\Users\MyUser > Measure-Command {Add-PSSnapin vmware.vimautomation.core}

  Days: 0

  Hours: 0

  Minutes: 0

  Seconds: 1

  Milliseconds: 871

  Ticks: 18717065

  TotalDays: 2.16632696759259E - 05

  TotalHours: 0.000519918472222222

  TotalMinutes: 0.0311951083333333

  TotalSeconds: 1.8717065

  TotalMilliseconds: 1871.7065

  Test 2 - snap of PS of load on a 2012R2 Windows Server not connected to the internet, check on CRL

  PS C:\Users\MyUser > Measure-Command {Add-PSSnapin vmware.vimautomation.core}

  Days: 0

  Hours: 0

  Minutes: 0

  Seconds: 51

  Milliseconds: 603

  Ticks: 516030768

  TotalDays: 0.000597257833333333

  TotalHours: 0.014334188

  TotalMinutes: 0.86005128

  TotalSeconds: 51.6030768

  TotalMilliseconds: 51603.0768

  
  

  
  Test 3 - support software component PS plug-in on a Windows Server 2012R2 not connected to the internet, check CRL disabled

  PS C:\Windows\system32 > Measure-Command {Add-PSSnapin vmware.vimautomation.core}

  Days: 0

  Hours: 0

  Minutes: 0

  Seconds: 16

  Milliseconds: 323

  Ticks: 163238507

  TotalDays: 0.000188933457175926

  TotalHours: 0.00453440297222222

  TotalMinutes: 0.272064178333333

  TotalSeconds: 16.3238507

  TotalMilliseconds: 16323.8507

  As you can see there is an improvement when I disable CRL checking in accordance with this article: http://blogs.vmware.com/PowerCLI/2010/01/troubleshooting-slow-startup-with-powercli-40-u1.html

  But I still have 16 seconds to load the snap against 1 second on my workstation (which has much less computer resources!)

  Any help is appreciated.

  Hi LucD,

  I've found a workaround:

  When I run the import-PSSnapin I noticed (with wireshark) a lot of traffic failed to WAN addresses, so I set myself, in Internet Options a false proxy (127.0.0.1), excluding the proxy DNS of my domain active directory name (so I can connect to the virtual center without going through the wrong proxy)

  Now is the time of execution:

  Windows PowerShell

  Copyright (C) 2013 Microsoft Corporation. All rights reserved.

  PS C:\Users\MyUser > Measure-Command {Add-PSSnapin vmware.vimautomation.core}

  Days: 0

  Hours: 0

  Minutes: 0

  Seconds: 2

  Milliseconds: 774

  Ticks: 27745259

  TotalDays: 3.2112568287037E - 05

  TotalHours: 0.000770701638888889

  TotalMinutes: 0.0462420983333333

  TotalSeconds: 2.7745259

  TotalMilliseconds: 2774.5259

  Not bad! Execution time lowered 16 sec at 2.8 sec

• IaaS distributed installation error every time that the server 2012R2

  I've tried literally all on google and even some things that not relate when you try to resolve this problem... but basically install fails to half way through and this is the part of newspaper where starts the error: someone has any ideas? There are no firewall anywhere.  The database is created on the server whenever I run the present.  Each pre - req is installed, everything appears in the auditor of pre - req.

  News: 2015-02-09 02 50 13 182 PM: "C:\Program Files (x 86) \VMware\vCAC\Server\Model" MoveRegistrationDataToDB - file name "C:\Program Files (x 86) \VMware\vCAC\Server\Model" s "dbvraiaasprd" d "vcac" - v

  News: 2015-02-09 02 50 17 385 PM: command completed successfully.

  News: 2015-02-09 02 50 17 PM 401: registration with the service catalog

  News: 2015-02-09 02 50 17 PM 401: construction project is "C:\Program Files (x 86) \VMware\vCAC\Server\Model" (InitializeRepo Target.

  News: 2015-02-09 02 50 17 PM 401: build succeeded.

  News: 2015-02-09 02 50 17 PM 401: 0 warning (s)

  News: 2015-02-09 02 50 17 PM 401: error (s) 0

  News: 2015-02-09 02 50 17 PM 401: time 00:00:27.36

  News: 2015-02-09 02 50 17 416 PM: execution of C:\Windows\Microsoft.NET\Framework\v4.0.30319\MsBuild.exe "C:\Program Files (x 86) \VMware\vCAC\Server\Model Manager Data\DeployRepository.xml" /t:InstallRepoModel /p:RepoUtilDir = "C:\Program Files (x 86) \VMware\vCAC\Server\Model Manager Data '; AssemblyDir = "C:\Program Files (x 86) \VMware\vCAC\Server\Model Manager Data" /p:DBServer = "dbvraiaasprd"; DBName = 'vcac"/p:DBConnectParam =" "/p:InstallType = 'Install'"

  News: 2015-02-09 02 50 17 432 PM: version of Microsoft (R) Build Engine 4.0.30319.34209

  News: 2015-02-09 02 50 17 432 PM: [Microsoft .NET Framework, version 4.0.30319.34209]

  News: 2015-02-09 02 50 17 432 PM: Copyright (C) Microsoft Corporation. All rights reserved.

  News: 2015-02-09 02 50 17 PM 448: Build started on 09/02/2015 14:50:17.

  News: 2015-02-09 02 50 17 463 PM: project ' C:\Program Files (x 86) \VMware\vCAC\Server\Model Manager Data\DeployRepository.xml "on node 1 (Target InstallRepoModel.

  News: 2015-02-09 02 50 17 463 PM: InstallRepoModel:

  News: 2015-02-09 02 50 17 463 PM: #InstallRepoModel # install repository models

  News: 2015-02-09 02 50 17 PM 479: "C:\Program Files (x 86) \VMware\vCAC\Server\Model Manager Data\RepoUtil.exe" Assembly-SqlInstall - f "C:\Program Files (x 86) \VMware\vCAC\Server\Model Manager Data\DynamicOps.Core.Common.dll","C:\Program Files (x 86) \VMware\vCAC\Server\Model Manager Data\DynamicOps.Core.External.dll","C:\Program Files (x 86) \VMware\vCAC\Server\Model Manager Data\DynamicOps.Core.Licensing.dll","C:\Program Files (x 86) \VMware\vCAC\Server\Model Manager Data\DynamicOps.ManagementModel.Common.dll. , "C:\Program Files (x 86) (x 86) \VMware\vCAC\Server\Model \VMware\vCAC\Server\Model" s - dbvraiaasprd d 'vcac' - crush - v

  News: 2015-02-09 02 50 33 089 PM: command completed.

  News: 2015-02-09 02 50 34 729 PM: "C:\Program Files (x 86) \VMware\vCAC\Server\Model" model-Install - f "C:\Program Files (x 86) \VMware\vCAC\Server\Model Manager Data\DynamicOps.ManagementModel.dll" s "dbvraiaasprd" d "vcac" - c "C:\Program Files (x 86) \VMware\vCAC\Server\Model Manager Data\ManagementModelSecurityConfig.xml"-v

  News: 2015-02-09 02 51 42 513 PM: System.Net.WebException: the underlying connection was closed: the connection was closed unexpectedly.

  News: 2015-02-09 02 51 42 513 PM: to System.Data.Services.Client.BatchSaveResult.BatchRequest)

  News: 2015-02-09 02 51 42 513 PM: to System.Data.Services.Client.DataServiceContext.SaveChanges (SaveChangesOptions, options)

  News: 2015-02-09 02 51 42 513 PM: to DynamicOps.Repository.RepositoryServiceContext.SaveChanges (SaveChangesOptions, options)

  News: 2015-02-09 02 51 42 513 PM: to DynamicOps.Tools.Common.SecurityHelpers.InstallSecurityConfig (config securityConfig, String httpRootRepository)

  News: 2015-02-09 02 51 42 513 PM: at DynamicOps.Tools.Common.ModelHelpers.InstallModel (String assemblyFileName, String securityFileName, String server, catalog of, string userName, String password, String httpRootRepository)

  News: 2015-02-09 02 51 42 513 PM: to DynamicOps.Tools.Repoutil.Commands.ModelInstallCommand.Execute (CommandLineParser Analyzer)

  News: 2015-02-09 02 51 42 513 PM: Warning: return nonzero code. The command failed.

  News: 2015-02-09 02 51 42 559 PM: C:\Program Files (x 86) \VMware\vCAC\Server\Model Manager Data\DeployRepository.xml (624,5): error MSB3073: the command "" C:\Program Files (x 86) \VMware\vCAC\Server\Model "model-Install - f" C:\Program Files (x 86) \VMware\vCAC\Server\Model Manager Data\DynamicOps.ManagementModel.dll "s 'dbvraiaasprd' d 'vcac' - c" C:\Program Files (x 86) \VMware\vCAC\Server\Model Manager Data\ManagementModelSecurityConfig.xml "-v" came out with code 1.

  News: 2015-02-09 02 51 42 559 PM: construction project is "C:\Program Files (x 86) \VMware\vCAC\Server\Model" (InstallRepoModel target - has FAILED.

  News: 2015-02-09 02 51 42 559 PM: Build FAILED.

  News: 2015-02-09 02 51 42 559 PM: "C:\Program Files (x 86) \VMware\vCAC\Server\Model" (target InstallRepoModel) (1)->

  News: 2015-02-09 02 51 42 559 PM:(InstallRepoModel target)-->

  News: 2015-02-09 02 51 42 559 PM: C:\Program Files (x 86) \VMware\vCAC\Server\Model Manager Data\DeployRepository.xml (624,5): error MSB3073: the command "" C:\Program Files (x 86) \VMware\vCAC\Server\Model "model-Install - f" C:\Program Files (x 86) \VMware\vCAC\Server\Model Manager Data\DynamicOps.ManagementModel.dll "s 'dbvraiaasprd' d 'vcac' - c" C:\Program Files (x 86) \VMware\vCAC\Server\Model Manager Data\ManagementModelSecurityConfig.xml "-v" came out with code 1.

  News: 2015-02-09 02 51 42 PM 591: 0 warning (s)

  News: 2015-02-09 02 51 42 PM 591: 1 error (s)

  News: 2015-02-09 02 51 42 591 PM: time 00:01:25.12

  For all of you who read this, I was able to solve the problem.

  Through all the blogs I read, I did sort of a stupid Setup 4.5.2 on server 2012R2 error.  DON'T, DON'T.

  To uninstall the 4.5.2 version of server 2012R2 if you install like I did, go to programs and features, switch view installed updates and remove the update for Windows KB2934520

  After doing this, I was able to smooth sailing through the installation.  I realized that halfway through my troubleshooting, but considering the compatibility of .net usually I don't think it would be a huge problem and I though that surely there would be a vmware KB on such a stupid mistake but apparently not.

• Server 2012R2 Lenovo ROK fails to intsaller to vmware

  I'll put up the new RD630 with 2012RD (lenovo ROK) on Vmware server

  If fails to install as recognized Lenovo hardware... support sent a link to change the data store. I'm relatively new to Vmware, does anyonehave step by step instructions to change the configuration?

  Here's what they sent:

  https://support.Lenovo.com/us/en/products/servers/ThinkServer-rack-servers/ThinkServer-RD630/solutio...

  It's getting into vmware, choose the virtual machine and change the configuration settings, add a line, and enter SMBIOS.reflecthost = "TRUE". It was my steps:

  1. Launch the hypervisor
  2. Click on Virtual Machine
  3. Click on change Virtual Machine properties
  4. Click Options, click general
  5. Click on Configuration settings
  6. Click Add a line
  7. Enter SMBIOS.reflect.host the right pane in the left pane and TRUE
  8. Click OK

  You will now be able to install the version of Lenovo ROK of the server 2012R2

• Œuvres SQL query to MS SQL Server 2008, but not when you use the database kit

  I have this SQL query:

  DECLARE TABLE (@DataTypeTable)
  Name varchar (128).
  TypeID INT)

  -Add comma delimeted type data in the temporary table names
  INSERT INTO @DataTypeTable (name)
  SELECT * from WhatWeShouldDoRead.func_Split (@DataTypeTrimmed, ',')

  SELECT the name OF @DataTypeTable

  That takes a comma delimited by the string and returns the string as a table.  It works correctly in Microsoft SQL Server Management Studio.  When I run this as a stored procedure I return nothing.  There are no errors, SQL or otherwise.  I checked that I am connected to the correct database and the stored procedure is responsible without changing any error chain which is reported of this stored procedure (that code is not shown in the example above).  Has anyone seen this problem before, or have experience with SQL/Labview interfaces to tell me what I am doing wrong?

  Thanks in advance.

  
  

• Server 2012R2 Standard Remote Desktop redirected printer stops printing 372 Win32 error 2147500037

  All of a sudden that all users RDP cannot print on any redirected printers on Windows Server 2012R2.  Printers appear on printers and devices on the server.  Print jobs appear in the queue on the server, click local device, but disappear without printing queues.  Same behavior for multiple computers, Windows 7, se8, all users, including administrators.  Easy Print installed.  Work on it for hours without success. For any help or suggestions appreciated!

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Windows Server 2012R2 Task Manager

  We have a question about the Task Manager in Windows Server 2012R2.

  We have a client running on a Terminal Server, they want to use the Task Manager to kill a task that is not responding.

  By default, only the user can see all taks running, also other users.

  Is there a way to partially block it? Perhaps in a GPO?

  Hello

  I suggest that you post the application on Microsoft TechNet forum because we have experts working on these issues. You can check the link to post the same query on TechNet:

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home

  Please do not hesitate to contact us if you have other questions related to Windows.

• Trial of ISO Windows Server 2012R2 not start

  I downloaded Windows Server 2012R2 trial ISO file - named 9600.17050.WINBLUE_REFRESH.140317 - 1640_X64FRE_SERVER_EVAL_EN-US-IR3_SSS_X64FREE_EN-US_DV9. ISO.

  After burning by 12 Nero (and even Windows 8 image burning tool), I had only a README file. TXT file on the DVD disc,

  with the content of the text:

  This disc contains a "UDF" file system and requires an operating system
  This specification of the system supports the ISO-13346 "UDF" file.

  I tried first to boot from this drive to install Windows server 2012 R2, but I got the error message:

  Cannot find the BOOTMGR

  How can I solve this problem?

  Kind regards

  Zvi

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Why remove the Terminal Server on Windows Server 2008 Standard Server HKEY_USERS\S -? When one connects users off?

  Why remove the Terminal Server on Windows Server 2008 Standard Server HKEY_USERS\S -? When one connects users off?

  I have a setting wrong?
  I can't find a setting that relates to this in either Terminal Server Config or Terminal Server Manager...
  Any help would be much appreciated.

  Hi Richard,

  Thanks for posting your question on Microsoft Community!

  I suggest you to ask your question in the section service Terminal Server TechNet forums for assistance.

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  I hope this helps.

• Change my Win 2008 and SQL Server on the server with SATA drives to the server with SAS disks

  I need to change my disks on my HP Server. Disco SATA Raid 1, I have to pass it to a server with SAS disks

  I haver Windows 2008 Server 64-bit installed SQL

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited to the audience on MSDN. Please post your question in the below link:

  http://social.msdn.Microsoft.com/forums/en/category/SQLServer

• How to install updates without the disks when he asks?

  I am trying to install an update for Microsoft Word 2002, which is preinstalled on my computer. I did not all software on the disks when I bought the computer again. I have the certificate for Windows which accompanies it.

  In the installation of the update for Word, he gets up then invites me to insert the disk for Word because he needs a certain file. It is rather impossible for me to do.

  Any suggestions? Thank you

  http://www.Microsoft.com/Office/Community/en-us/flyoutoverview.mspx

  Office newsgroups

  http://www.Microsoft.com/Office/Community/en-us/default.mspx?DG=Microsoft.public.Word.docmanagement&lang=en&CR=us

  Discussions of general issues of Word.

  They will help you with your Word question in the newsgroups Office above.

  See you soon.

  Mick Murphy - Microsoft partner

• I want to reinstall Windows Vista, but I do not have a disk when I bought the laptop; I don't have product key, however; What should I do?

  My old laptop is now very slow performance, no doubt because it is hopelessly cluttered with unwanted stuff, viruses etc.. So I have tried various methods of cleaning without success, I decided to reformat (all data on it has been transferred to a new laptop) and start from scratch by reinstalling Windows Vista Home (installed when I bought it). But no installation disc has been delivered, although the product no key. is located on the underside of the laptop. What should I do? I could ring you, but I don't have a land line, and a long call on my cell phone would probably cost a fortune. It would be great if you were ringing me to talk me through the process (07760 101610)

  Greetings - Graham Durbin

  Hello

  Sorry, this is not Microsoft and we don't do phone calls that we are for the most part, Windows users help each other here...

  Here are the different ways that you can reinstall Vista.

  See which is more easy for you.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  And if you do not score a manufacturer of recovery on your hard drive, you should be able to make your own recovery from her disks to reinstall the operating system.

  Go to programs > name of the manufacturer of your computer > then their system or recovery tools software topics for them, depending on how it is formulated.

  If you can't find any reference to it, contact the manufacturer for advice on how to make these recovery disks.

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• I need to reinstall Windows Vista, but it's come with a disk when I bought my computer

  I need to reinstall Windows Vista, but it's come with a disk when I bought my computer.  How can I get a copy of it?

  I need to reinstall Windows Vista, but it's come with a disk when I bought my computer.  How can I get a copy of it?

  1. call the manufacturer of your computer, ask a set of recovery disks. The entire cost is low and the money is well spent.
  The game allows you to restore your computer. Ask a manul on how to use the recovery discs.

  2. While the site of the computer manufacturer, ask to speak to a technician. Ask the person to teach you how to access your computer, Partition Recovery and utilization of the partition to restore your computer to factory State.

  3. see if you can find a friend who has a Microsoft Vista Installation DVD. Borrow it and reinstall Vista using your product key from the computer.
  If you are lucky enough to a friend, here's the tutorial for pure install using the Installation of MS DVD:
  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  4. this link may be useful...
  How to replace Microsoft software or hardware, order service packs and replace producthttp://support.microsoft.com/kb/326246 manuals

  Good luck.

• HP Officejet 7500 has compatibility with Windows Server 2012R2

  Dear team,

  I would like to know if the HP Officejet 7500 a is compatible with Windows Server 2012R2 since there is no drivers for this OS.

  Thank you

  Mega-Support,

  Thanks for posting.

  Under Windows, you can connect a printer to a computer via USB and be able to print. However, since there is no software for it on the HP site it's all what you can. Unfortunately, you will only be able to print using the USB method.