WINDOW 7 is infected by the Trojan virus! -now get the message "Application notfound" at the opening of the programs
My PC has been infected by Trojan. I cleaned it with Windows Defender but my windows and operating system do not work as usual. I can't update, install or restore anything from the internet or CD. Whenever I did it will direct me to other programs e.g. eplorer IE, Windows media player or words, etc or say thatf "not askingfound"! . "» I can't change anything in my computer now. Grateful if someone can help.
Hello
You send messages in the Forums of Vista even if you mention Windows 7 so it would be
be the best in the future, to post in the correct forum.
Answers - Windows Forums
http://answers.Microsoft.com/en-us/Windows
=================================================================
If you need search malware here's my recommendations - they will allow you to
scrutiny and the withdrawal without ending up with a load of spyware programs running
resident who can cause as many questions as the malware and may be more difficult to detect as the
cause.
No one program cannot be used to detect and remove any malware. Added that often easy
to detect malicious software often comes with a much harder to detect and remove the payload. Then
its best to be thorough than paying the high price later now too. Check with them to one
extreme overkill point and then run the cleaning only when you are sure that the system is clean.
It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
the regular windows when you can.
TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
It will display all the infections in the report after you run - if it will not run changed the name of
TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
check with the other methods below.
http://support.Kaspersky.com/viruses/solutions?QID=208280684
Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
(If Rootkits run UnHackMe)
Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Malwarebytes - free
http://www.Malwarebytes.org/
Run the malware removal tool from Microsoft
Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.
You should get this tool and its updates via Windows updates - if necessary, you can
Download it here.
Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
(Then run MRT as shown above.)
Microsoft Malicious - 32-bit removal tool
http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en
Microsoft Malicious removal tool - 64 bit
http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en
also install Prevx to be sure that it is all gone.
Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
here or use Google to see how to remove.
http://www.prevx.com/ <-->-->
http://info.prevx.com/downloadcsi.asp <-->-->
Choice of PCmag editor - Prevx-
http://www.PCMag.com/Article2/0, 2817,2346862,00.asp
Try the demo version of Hitman Pro:
Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
(viruses, Trojans, rootkits, etc.). who infected your computer despite safe
what you have done (such as antivirus, firewall, etc.).
http://www.SurfRight.nl/en/hitmanpro
--------------------------------------------------------
If necessary here are some free online scanners to help the
http://www.eset.com/onlinescan/
-----------------------------------
Original version is now replaced by the Microsoft Safety Scanner
http://OneCare.live.com/site/en-us/default.htm
Microsoft safety scanner
http://www.Microsoft.com/security/scanner/en-us/default.aspx
----------------------------------
http://www.Kaspersky.com/virusscanner
Other tests free online
http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1
--------------------------------------------------------
After the removal of malicious programs:
Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
system files.
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228
Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html
-----------------------------------------------------------------------
If we find Rootkits use this thread and other suggestions. (Run UnHackMe)
======================================
If necessary AFTER THAT you are sure that the machine is clean of any malware.
How to do a repair installation to repair Windows 7
http://www.SevenForums.com/tutorials/3413-repair-install.html
I hope this helps.
Tags: Windows
Similar Questions
-
Then I get a message that it cannot be opened. It started with Office Word 2007, now it seems to touch almost all Windows programs.
Looks like you may have a virus or other malware. Get your updated antivirus program and boot into Safe Mode. Note that some viruses can hide from your normal antivirus program, so you really need to scan in Safe Mode. To enter in Safe Mode when you turn on first, press F8 on every seconds until you get the menu, and then select Safe Mode. Then run a complete system scan.
Microsoft has suggestions and offerings to
http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus
Moderator Forum Keith has a few suggestions along this line to
If that suits him fine. If this is not the case, use system restore to go back to an earlier date at the beginning of the problem. To run system restore, click Start-> programs-> Accessories-> System Tools-> system restore. Click on the box that says show more restore points.
You can check the corrupted system files. Open an administrator command prompt and run SFC if the above does not help. Click START, and then type sfc in the search box, right-click to SFC. EXE and click run as administrator. Then, from the command prompt type sfc/scannow.
Finally if all else fails, you can look at the rather cryptic system event log. To make, click Start-> Control Panel-> administration-> event viewer tools. Once in Event Viewer system log-click and scroll entries looking for these "error" with indicator see if you can find guidance on where the problem may be.
I hope this helps. Good luck.
-
original title:wiaacmgr.exe
I found a lot on the Internet about wiaacngr.exe not opening not or refuses to recognize the camera. My problem is almost the opposite! Whenever I connect my Canon camera, by USB, my current laptop (Windows XP Pro SP3 of v5), wiaacngr.exe opens a window asking me to select the program to start. But it offers only two options: M/S Office Word and scanner and camera assistant, neither of which I want to use. If I close the window... Not much, but it's a nuisance. I would be happy if she has proposed to launch work stations. I then click on the box "Make this every time" and will never see the window. Otherwise, I'd be happy to remove the program completely. Can someone tell me how to achieve one of these? S ' Please!
JimHello
I suggest you to return the item and check if it helps:
Change the programs that Windows uses by default
http://Windows.Microsoft.com/en-us/Windows-Vista/change-which-programs-Windows-uses-by-default
See also:
Change default programs using Set Program Access and computer defaults
-
How to install the Windows Vista equation editor? The program is already installed?
How to install the Windows Vista equation editor? The program is already installed?
http://en.Wikipedia.org/wiki/Microsoft_Equation_Editor
'Equation editor was developed by Design Science and is included in all versions of Microsoft Office'
Read the above info.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Office:
http://answers.Microsoft.com/en-us/Office/default.aspx
Office at the above link forums
Theywill help you with your office questions when repost you in the Office Forums above.
See you soon.
Mick Murphy - Microsoft partner
-
Where in Windows 7 Pro to release the program does not run all computer starts?
Where in Windows 7 Professional to release the program is not to turn on and start any computer starts?
Hello
Thank you for contacting Microsoft Community.You can go to start-> click on all programs-> select start. You can find all the programs that run at startup, here. Deleting will stop them from running at startup.You can also open the System Configuration to disable all programs running during startup. Go to start-> type msconfig.exe-> press ENTER. IF UAC prompts, click Yes. Opens the System Configuration window. Now go to the Startup tab and disable all applications (to remove the tick) you want to stop from running at startup. Click on apply and then OK. Restart the PC, once done. -
By double clicking on a file in Windows Explorer it only starts the program it does not open the actual file. 1 program, all the others still work ok.
This option is used to work, I installed a viewer of this program option (it's a based CAD program) and after that I uninstalled the viewer that he would not even start the program, he was trying to launch the viewr. I noticed that the file association was still for the Viewer so I changed it back, but he now throws only program. Under right click, properties, file Type: it is said the extension only where it used to say the name of the program.
Thank you
Sam
Hey Sam,
Default configuration program.
http://Windows.Microsoft.com/en-us/Windows7/change-which-programs-Windows-uses-by-default
If this does not work, then contact the Help Viewer support.
All the best!
-
Application of program compatibility does not start
I use a database program in a number of previous versions of windows and windows 7 does not allow the program to launch denial of service. What gives?If you have Windows 7 64 bit without BACK program can run because there is no 16-bit subsystem to run it.
Try dosbox http://www.dosbox.com/. If that won't work your program, you'll need either a new database or run the BACK or on a 32-bit version of Windows in a virtual machine like VirtualBox https://www.virtualbox.org/.
-
I have a new computer with Windows 10 and I use Acrobat 9.0 Standard of my old computer (Windows 7). I download the program from Adobe, and when I install it then I put my serial number and get the response "is not a number valid serial. What should do? I have an account at Adobe with all my serial number
Hi rolfb13339293,
I would like to inform you that acrobat 9 is not compatible with windows 10.
You can check system requirements here: Adobe Acrobat required configuration
The latest version is Acrobat DC.
Please let us know if you need additional assistance.
Concerning
Sarojini
-
I use Lightroom 5.7, 64-bit with Windows 7 Professional. Without apparent reason, I now get an error message when I export a photo, say a raw image to a JPG. However, the exported image seems to be OK. But now, I noticed that my repertoire records in library view LR does not show images correctly: If there is a folder with subfolders, the folder contains 0 images, but sub records show the correct number of images. What happened and is there a solution? I tried to uninstall Lightroom and re - install, but the problem persists.
Here is a screenshot of the error message:
Post edited by: Joseph Costanza, Jr.
See here for a solution.
-
Problem to apply the profile! "How to fix
Hi, my laptop is connected to the internet before, but now when I want to connect I get this message "Application Profile problem!" how to solve this problem.I search in Google allot, but I a not end an answer to solve my problems. Can someone help me?Thank you.Hello
· Using internet connection wired or wireless?
Follow these steps:
Step 1:
Updated driver for your network card to the last. Also updated the firmware on the router as well. Follow the steps in troubleshooting section and check if that helps:
How to troubleshoot possible causes of Internet connection problems in Windows XP
http://support.Microsoft.com/kb/314095
Step 2:
Follow the form of measures troubleshooting article and check if that helps.
Windows wireless and wired network connection problems
This behavior is generated by the Manager of Intel wireless cards. This feeder is usually loaded with the Intel Wireless card drivers. If that's the problem, you can try Intel support and check.
-
After a virus scan I now get this message when I go to my Outlook Express... I can't bring in mail or send... Thanks a lot for all the help... Dave
The server responds with an error. Account: "pop.embarqmail.com', server: 'pop.embarqmail.com', Protocol: POP3, server response: '-ERR cannot establish TLS with POP server 208.47.184.129:110, SSL_connect error 5', Port: 110, secure (SSL): no, Server error: 0x800CCC90, error number: 0x800CCC90
In addition to the suggestion of Firedog, after disabling email scanning (see www.oehelp.com/OETips.aspx#3) you may need to remove your e-mail account, close and reopen OE and then add it back back.
Steve
-
Code 8024200 D Windows Update has encountered an unknown error. I get this message for both updates and windows failed to install. Can someone help me?
Hello SammyFlo,
Take a look at the following thread:
Let us know if that helps.
Best regards
Matthew_Ha
-
I have Photoshop CS5.1 (bought in 2011). The photoshop Camera Raw plugin is not recognize the format of my new Nikon D610. I've updated the version of my Camera Raw plugin and still get this message when you try to open pictures in photoshop. Help, please.
This link shows that 8.3 ACR supports the Nikon D610 and 6.7.1 was the final version for CS5.
Camera Raw plugin | Supported devices
If you can switch to CS6 and ACR 8.7.1
or using the DNG converter, convert your Nikon raw files to DNG to open in CS5.
Here is the download link: Adobe - Adobe Camera Raw and DNG Converter: for Macintosh: Adobe DNG Converter 8.7.1
or Windows: Adobe - Adobe Camera Raw and DNG Converter: for Windows: Adobe DNG Converter 8.7.1
And here's a great video tutorial on how to use the converter.
https://www.YouTube.com/watch?v=0bqGovpuihw
Gene
-
I get this message when you try to open Mozilla: the procedure entry point sqlite3_db_status could not be located in the dynamic link library mozsqlite3.dll.
Do a clean reinstall.
Download a new copy of Firefox and save the file to the desktop.
- Firefox 5.0.x: http://www.mozilla.com/en-US/firefox/all.html
- Uninstall your current version of Firefox.
- Do not remove the data of a personal nature when you uninstall the current version.
Delete the program folder Firefox before installing newly downloaded copy of the Firefox installer.
- It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.
Your bookmarks and other profile data is stored in the Firefox profile folder and will not be affected by a relocation, but make sure that you do not select delete data of a personal nature if you uninstall Firefox.
-
My LR6 in Windows10 was arrested following a software without correct closure error. When the reopening, LR6 gives the message "your catalog is always opened by another program. Please close this program "." But no other program is open. How early to solve this problem?
There is a file with a name ending in. BLOCK in the same folder as your catalog Lightroom.
Remove this item. LOCK file. Do not remove anything else.
-
I just downloaded the Muse CC of the creative cloud trial version. But I got the following error message when I try to open my muse program. "This file Adobe Muse of the site requires a newer version of Adobe Muse. Please upgrade to the latest version. "But the system keep telling me that my version is up-to-date. Help, please.
Hi Mandy,.
Please check the system requirements for Muse system requirements | Muse , if you are on a 32-bit system, it is possible to use the old version of Muse.
Kind regards
Akshay
Maybe you are looking for
-
El Capitan on MacBook (early 2008 White paste) 4.1
Hi all I just want to preface this post by specifying that I'm completely new in the Mac game. I googled my problem and did not find a similar problem. But I'm sorry in advance if I am not good enough. That being said, I recently acquired an Early 20
-
Laptop Dock trackpad stops working intermittently, everyone
The trackpad stops intermittently and it does not appear to be linked to a particular application or action. Closing and reopening of the laptop lid (screen) seem to fix, but I'd rather the cause. Does anyone else know this?
-
Removal of Windows credentials
When I try to delete the crendentials for old PCs, will not save the change - from the PC is still displayed in the list. How can I remove them permanently? Thanks in advance!
-
my print job is stuck in the print that... i have tried everything from turning the machine off to add the printer again... and Yes, I have a Mac... printer was working fine 2 days ago. I checked the wireless connection and it says 'connected', but a
-
getEntityByReference VApp Metadata
I have a workflow that is able to start by Workflow-runner"by Christophe. The workflow I write must update the metadata of a vApp before returning to the blockingtask.I have a code that shows me that I have a metadata object[18:39:04.052 2012-04-11]