Window a lot of installation errors in the event log, model of the printer incorrectly installed

Similar Questions

• Windows Vista x 86, and Windows 7, losing by default settings of the printer after install updates day or end of remote session.

  We have been troubleshooting this issue for a while and we didn't have a patch even if it's a known issue.  When a workstation is set up as a network printer, even if the default settings of Windows (xps document writer) has been removed, the workstation will lose the default settings of the printer after that remote desktop sessions or windows updates have been installed.

  We tried MS FixIT and a registry mod that changes the order of the printers without success.

  We are hoping that there is a fix available before finalize us our Windows 7 image for deployment.

  [HKEY_CURRENT_USER\Software\Microsoft\Windows NT\CurrentVersion\Windows]
  "DebugOptions" = "2048".
  'The documents '=' '
  "DosPrint' = 'no '.
  "Load"=""
  "NetMessage' = 'no '.
  'NullPort' = 'None '.
  "Programs"="com exe pif bat cmd.
  "device"="no printer name1, winspool, Ne01:

  In our reg mod, we have changed the position of the device at the same time Ne00 and Ne01 without having an effect on the loss of the default printer.  The mod set the default printer, but the settings do not stick.

  I hope there is a fix for this, in addition to a logon script, because our users are on several remote sites.

  ISA1 MCSE

  Hello

  The issue of Windows 7, you have posted, suitable for the IT Pro TechNet public. Please post your question in the TechNet forum. Please post your question in the below mentioned link:

  http://social.technet.Microsoft.com/forums/en-us/w7itproinstall/threads

  Kind regards

  Gaurav Prakash - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problem area: windows update; Error: TRUST_E_NOSIGNATURE (0x800b0100) __Message: installation error prevented the service pack 2 windows systems (KB948465) _

  Problem area: windows update; Error: TRUST_E_NOSIGNATURE (0x800b0100)
  Message: Installation error prevented the service pack 2 windows systems (KB948465)

  http://support.Microsoft.com/kb/956702

  «Error message when you try to use Microsoft Update or Windows Update Web sites to install updates: «0x800B0100»»

  Method for Windows Vista or Windows Server 2008 to resolve this issue, run the tool (Checksur.exe) system update. To do this, follow these steps:

  1. Download and run the system update tool. This tool runs an ad hoc analysis of inconsistencies that might prevent future maintenance operations. For more information about how to download and run the Checksur.exe tool, click on the number below to view the article in the Microsoft Knowledge Base:
     947821 (http://support.microsoft.com/kb/947821/) Description of the update readiness tool for Windows Vista system
  2. Try to install updates again.

  http://support.Microsoft.com/kb/947821/

  "Description of the preparation tool system update for Windows Vista for Windows Server 2008 and for Windows 7"

  If the above solves the problem:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack update Vista Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include this error Code, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• When a program is loaded, an error message Apparait-c:|windows\winsxs\---.dll is not compatible with windows or there is an error in the file.

  When a program is loaded, an error message Apparait-c:|windows\winsxs\---.dll is not compatible with windows or there is an error in the file. What should I do?

  Hello

  always check the compatibility of vista programs on the link below

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  If a program is compatible with vista you can try right click on the setup.exe, and then selecting run as administrator

  It is not compatible with vista, you can try running it in a previous operating system mode

  This does not work for all programs

  read the information below

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

• Whenever I boot Windows XP Professional I get the message: error 7026 system event log

  Original title: 7026 event log system error

  Get an error in the error 7026 system event log the following boot-stat or system-stat driver could not load DCDisk.  I get this log entry each I boot XP Pro.  It doesn't seem to be the cause of failure, other than the log entry.  The only app that has a dcdisk.exe I can find is Farstone I installed on the system

  Uninstall and reinstall the program that you have installed that has created the entry

  http://consolecopyworld.com/DC/dc_utils.shtml

  Alternatively, you can remove the redundant entry using Autoruns.

  To identify what loads when you start using Autoruns (freeware from Microsoft).

  http://www.Microsoft.com/technet/sysinternals/ProcessesAndThreads/Autoruns.mspx

  With Autoruns, you can deselect an item which disables startup, or you can click with the right button on an item, then remove it. If you clear the check box that you can check back for re - activate the element. It is an approach much safer than editing the registry and better than using msconfig.

  Another useful feature of the program is that you can click with the right button on an item and select search online to get information about the selected item.

• now, I have no audio device, tried to download the realtek drivers but failed: class installer has refused the request to install or update the device?

  Original title: the class installer has refused the request to install or update the device?

  now I don't have a device audio, reinstalled windows xp with recovery disk, tried to download the realtek drivers but failed.

  Hello

  1. What is the status of the sound card in Device Manager?

  The following article might be useful: no sound in Windows

• Error in the printer for 16-bit application that runs in Windows7 32 error "caused a floating point exception in hpcui121.dll to 0x5b39caea.

  Original title: Error in the printer for 16-bit application that is running in Windows7 32

  I have a 16-bit application. I'm running Windows 7 32. All of a sudden, I can't print my application. I have two messages: "caused a floating point exception in hpcui121.dll in 0x5b39caea" and "caused an access violation in WOW32. DLL to 0x6dc50421. Any help to solve the problem would be greatly appreciated.

  Hello

  Have you tried the methods suggested in my previous post dated August 29?

  Response to help you further.

• When I try to print anything in Firefox, email or the Internet, I get a message that says: error in the printer and nothing prints. Tried the stuff even printing from the Internet

  When I try to print anything in Firefox, email or the Internet, I get a message that says: error in the printer and nothing prints. Tried to print things even to Internet Explorer, it works fine.

  Hello bdoolen, please try to reset firefox and see if that can solve the problem...

• Want 4500: Connection error! The printer could not connect to the server

  Connection error! The printer could not connect to the server!

  Cannot set up eprint or update the driver. Ever been on the forums and do not understand what to do!

  I am successfully connected to my router and can print from my pc and my ipad with airprint.

  PC "will not find"the printer either for purposes of updating

  What I need to change the DNS. If so, I don't know what it is or how to do it!

  I went to the ip address but was unable to click on "wireless (802.11)", as recommended by a last response forum, as the next low 'status '.

  Can anyone help?

  Very frustrated customer :-(

  Hi @roopuk,

  Thanks for getting back to me.

  Sometimes the manual DNS 8.8.8.8 / 8.8.4.4 won't work in some configurations of network users.  Try the same steps as described above, but this time use the following parameters:

  Manual preferred DNS Server: 209.244.0.3
  Auxiliary manual DNS server: 209.244.0.4

  If you encounter the error, as before, we take our proverbial gloves off to try a more intensive troubleshooting.

  What is happening, it is that your router allows your printer connection that to enable wireless, but not a secondary connection to Web services.  In order to get these devices to 'shake hands' a second time, you may need to enable DMZ mode on your network through the router's built-in Web server.  HP does usually not this configuration for its customers as errors can cause serious network problems, but I can certainly post the info you need on your router or the ISP of the staff support company so that they could help you directly.

  Here is the information that you need for your provider service to open ports on your router/modem...

  -Multicast must be enabled
  -Hello enabled for AirPrint (relevant for iOS and Mac OS users)
  -Mac filtering should be disabled
  -Also, make sure that your router's firmware to date if
  necessary
  - The dmz on the router mode and turn it on to the printers IP address: _

  Ports to open are: Eprint and Apps

  Incoming Ports.

  UDP
  80
  443
  ------------------
  Outbound ports

  TCP
  5222
  5223
  -------------------
  Once they are open, you should have no problems connecting to services web eprint on your device.

  I would like to know how it works for you.

  Kind regards

• C4780 - error in the printing system

  C4780 worked without incident for months until recently - now I find randomly in status 'offline '.  Today has been visited by "error in the printing system.  Any ideas?  I already deleted the printer and the software which then does a re - install using the downloaded software from the HP site (can't locate the original install CD).

  OK, I'll assume that this printer is connected wireless to your router.  I would like to know if it's USB to your PC.

  First of all, don't use WEP.  It is not safe and can cause connection problems.  Use WPA with a password of 13 + character that you create yourself!  Much easier and safer.

  From the front of the printer: [Scan] Setup > network > wireless network Test.  It will be radio of the printer self-test.

  When the printer is offline, run this utility.  It will tell you what is happening.

• When you print it out paper HP PSC 1507 just repeat the error in the print job

  Hi im on MAx OS X 10.6.4 and I got it all in one HP PSC 1507 printer... I don't know why but I have intralled all the drivers n etc. but it keeps just coming with error in the print job just stay

  Any help would be appreciated

  Thanks George

  Good question.  Although it is listed as being supported under Snow Leopard, there is not another print and scan all drivers.

  We will restore the print system and just use the built-in support for your printer:

  -Sys Prefs, Print & Fax
  -Right (control) click inside the box that lists your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign + to add again. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

• The new XP installation error. The signature for the family Windows XP Setup is not valid. The error code is fffffc0d

  I'm doing a fresh install of Windows XP Edition family on a new hard drive.  I get the same error message indicating that the product catalog can not be installed. I reformatted and retryed with the same result. I tried a different HARD disk, but got the same trouble. I also tried installing XP Pro after a reformat and got the same error. The first error window says "the signature for the family Windows XP Setup is not valid. The error code is fffffc0d", and the second says" error: the system cannot find message for message number 0xfffffc0d text in the file for syssetup.dll fatal error messages: Setup failed to install the product catalogs. " Any directive or ideas would be greatly appreciated. THX

  Hello

  I suggest you try the steps from the link below and check if it helps.

  http://support.Microsoft.com/kb/307153

  Hope this information is useful.

• Code 646 error, windows update encountered an unknown error during the installation of Office updates.

  Original title: 646, windows update error code has encountered an unknown error.

  I tried several times to allow the updates to install on my computer but I keep getting the above error message.  Here are the following updates are not transferred to the system

  Security for Microsoft Office 2007 Suite KB2596785 update,

  Update for Microsoft Office system 2007 KB2553089 security,

  Update of security for Microsoft Office 2007 System KB2553090,

  Update of security for Microsoft Office 2007 System KB2584063,

  Update for Microsoft Office Excel 2007 KB2553073 security,

  Update for Microsoft Office Powerpoint 2007 KB2596764 security,

  Update for Microsoft Office Powerpoint 2007 KB2596912 security,

  Update for the 2007 Microsoft Office System KB2553074 security

  Update for Microsoft Office 2007 suite KB2596651

  Update for Microsoft Office 2007 suite KB2596789

  Update for Microsoft Office Excel 2007 KB2596596

  I installed the update of Windows SP2 and ran the 'Fix It' program, but updates above will be not installed this over the last 2 weeks.

  PLEASE HELP ME!  Not an expert computer operator, but I can follow the clear and direct instructions on how to solve the problem.

  Hi Monicas,

  What Fixit did you run?

  You can read the following article and try the steps.

  http://support.Microsoft.com/kb/2258121?WA=wsignin1.0

  Note: If running the Fixit to resolve your problem, then you must try the steps for Windows Vista users solve the problem.

  Important: The above article contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, follow the steps from the link below:

  Back up the registry

• Windows Update Standalone Installer: error 0x80073afc the resource loader failed to find MUI file. Windows 7 64 bit

  I have a desktop PC running Windows 7 Professional 64-bit.  There is an update which is unable to complete, causing the PC to undo changes to before the update.  It usually takes an extreme amount of time, and of course, I've always updates installed.  I tried to use the Microsoft Fixit tool, which came back with error 0 x 80070057.  I saw in a community forum that I could try the tool of microsoft SURT, but after the long scan he came back with the following error:

  Windows Update Standalone install

  Setup has encountered an error: 0x80073afc

  The resource loader failed to find MUI file.

  Please help.

  Hello

  Thanks for posting your question on the Microsoft community.

  Thank you for details on the question and your efforts to resolve.

  This problem can occur because of corrupted Windows Update files and components.

  I suggest you to reset the Windows update components and check if that helps.
  Refer to this article:
  How to reset the Windows Update components?
  https://support.Microsoft.com/en-us/KB/971058

  Note: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://Windows.Microsoft.com/en-us/Windows/back-up-registry#1TC=Windows-7

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Microsoft updates for Windows XP, Office 2007 - Installation Error Code: 0 x 80246008

  I try to install 21 updates from Microsoft Update security.  I get a window that says 'download and install '.  The list fills.  Immediately, I get a screen that says "some updates were not installed."  I tried several times over the last week.  I am running Windows XP and Windows 2007.  Any suggestions on how to overcome this problem are appreciated.  Thank you.

  Here are the updates will not install.

  Installation error error code: 0 x 80246008

  Update security for Windows XP (KB2862152)
  Update for the filter of junk e-mail in Outlook 2007 (KB2825642)
  Update of security suites for Microsoft Office 2007 (KB2760415)
  Update of security for Microsoft Office Outlook 2007 (KB2825644)
  Update security for Windows XP (KB2868626)
  Update security for Windows XP (KB2876331)
  A security update cumulative for the stop bits ActiveX for Windows XP (KB2900986)
  Update for the filter of junk e-mail in Outlook 2007 (KB2850085)
  Update security for Windows XP (KB2893294)
  Update security for Windows XP (KB2892075)
  Update security for Windows XP (KB2893984)
  Update of security suites for Microsoft Office 2007 (KB2817641)
  Update security for Windows XP (KB2898715)
  Update for Windows XP (KB2904266)
  Update of security suites for Microsoft Office 2007 (KB2850022)
  Update security for Windows XP (KB2914368)
  Update of security suites for Microsoft Office 2007 (KB2837615)
  Update of security for Microsoft Office Word 2007 (KB2837617)
  Windows malicious software removal tool - January 2014 (KB890830)
  Update security for Windows XP and Windows Server 2003 (KB2917500)

  I try to install 21 updates from Microsoft Update security.  I get a window that says 'download and install '.  The list fills.  Immediately, I get a screen that says "some updates were not installed."  I tried several times over the last week.  I am running Windows XP and Windows 2007.  Any suggestions on how to overcome this problem are appreciated.  Thank you.

  Here are the updates will not install.

  Installation error error code: 0 x 80246008

  Please see this thread marked as answer that describes a problem similar to yours:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/Windows-XP-update-doesn