Window update will be not all updates

Similar Questions

• Update Windows in Windows 7 will be not updated. Error code 80244008. Troubleshooting report says 'device or resource (web proxy) is not configured to accept connections on port "8080".

  Update Windows in Windows 7 will be not updated.

  Error code 80244008.

  Troubleshooting report says 'device or resource (web proxy) is not configured to accept connections on port "8080".

  You may encounter temporary connection errors [for example, 0 x 80244008] when you use Windows Update or Microsoft Update to install updates
  http://support.Microsoft.com/kb/836941

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  A (another) Norton or McAfee application has already been installed on the computer (for example, a free trial version which is preinstalled when you bought it)?

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows Live Mail does not all my emails and does not synchronize with another e-mail account.

  Windows Live Mail does not all my emails and does not synchronize with another e-mail account.

  Hello

  Unfortunately the answers is a site of support of peers supported and has no real influence
  with Windows Live.

  Check with Windows Live Support and Forums

  Windows Live Mail Forums
  http://www.windowslivehelp.com/forums.aspx?ProductID=15

  Windows Live Solutions
  http://www.windowslivehelp.com/solutions.aspx?ProductID=15

  Windows Live Solution Center
  http://www.windowslivehelp.com/

  Compromised account - unauthorized account access
  http://windowslivehelp.com/solution.aspx?SolutionID=6ea0c7b3-1473-4176-b03f-145b951dcb41

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Because I downloaded the update of firefox I have more the firefox screen and will work not all of my favorites. Why?

  After I downloaded the latest update firefox I knew he disappeared. The opening of the screen is no longer the fox logo. The area of search in the toolbar indicates that leads research. And I find that not all my favorites still work. Example-I have to go to att to access my e-mail. That's fine if that's the way it is supposed to work, but if so I would like to know how to change my home screen - or at least the first thing I see when firefox opens on the site of att that I usually use my computer for e-mail. I'm also used to use google search and I'm an old lady of cat crazy I'm not really ready to change the way that I am familiar with my computer.
  Ideally, I get photo fox with the google search screen and click on the marked bookmark mail back on my computer?
  I'm not computer unless it is as it always has. Thank you, dawn

  Hello dawn, please be aware that there are malicious sites that will trigger the update of fake reviews/popups that try to get you wrong download software bundled with adware. never click on such websites or run these files offer - updates are managed automatically by firefox and do not download any file to it (always manually, you can check if you're up-to-date by going to firefox > help > about firefox).

  Please try these steps to find your firefox:

  1. Reset firefox (this will keep your bookmarks and passwords)
  2. then go to firefox > addons > extensions and where there are still extensions listed there, disable them.
  3. go to the windows control panel and remove all installed software recently where you don't know what he has or other suspicious looks.
  4. Finally, run a full scan of your system with security tools like the free version of malwarebytes and adwcleaner to ensure that adware is not present in other parts of your system as well.

  Fix Firefox problems caused by malicious software

• Windows 7 will be not updated after clean install

  I recently acquired a Vista laptop that I improved with a SSD and Windows 7 Professional.  After installation without incident on a new SSD and activation, I discovered that Win7 does not refresh the console update continues just search for updates and the CPU activity revolves around 50%.  I've linked several fixes on this site and others with no luck.

  I'm not a PC expert, but I (FINALLY) know what caused this problem and how to solve it!  , But first of all note that this is the solution for my WINDOWS 7 64-bit Home Premium just after a clean installation.  I don't know if this plan works for 32-bit systems or other 7s to win, but novel with minor changes and some research...?

  The part of Windows 7 that search updates would normally take 24 to 48 hours to complete his research.  You can tell that you have this problem, while you are waiting for the update search by CTRL-ALT-DEL, start the Task Manager, then watch TAB PROCESS, then click: show processes from all users.  Look down the list until you find a SVCHOST. EXE running by the SYSTEM which uses 50% or more of CPU and a large piece (73%) of memory.  Then, go to the window Windows Update of the control panel and it say to never look updates.  Then return to the Task Manager and KILL the big 50% fat process that you just found.

  MS produced a patch (patches of 2 k) that you can't normally without an update.  There is a way to download these files from 2 k, but then...

  You cannot install them normally without using WUSA (the stand-alone installation of Windows Update program).  And if you try to use it to install the patches, WUSA must begin a new search for 48 hours for updates before installing anything.  It is a circular trap!

  Click on the following link to download Windows6. 1 KB3102810-x 64.msu

  https://www.Microsoft.com/en-US/Download/details.aspx?ID=49540

  Use the registration option, DO NOT RUN IT!

  Click on the following link to download Windows6. 1 KB3112343-x 64.msu

  https://www.Microsoft.com/en-US/Download/details.aspx?ID=50023

  Use the registration option, DO NOT RUN IT!

  Look for these two files in your DOWNLOADS folder.  Copy them to your DESKTOP.

  Now to install them, you must use the stand-alone Installer, WUSA, BUT you must FORCE IT to do quite simply without looking for always.  Here's how:

  First of all, copy the following line exactly and completely:

  'C:\Users\Edmund\Desktop\windows6.1-kb3102810-x64.msu' /wuforce

  Click the start planet;

  Click in the search programs and files;

  Type: RUN

  (Make sure that you run as administrator)

  Click on the RACE to the top of the page, then right click on it and select PASTE;

  Replace Edmund regardless of your username;

  Press ENTER and let it roll.  After the installation is done, then...

  Copy the following line exactly:

  'C:\Users\Edmund\Desktop\windows6.1-kb3112343-x64.msu' /wuforce

  Click the start planet;

  Click in the search programs and files;

  Type: RUN

  (Make sure that you run as administrator)

  Click on the RACE to the top of the page, then right click on it and select PASTE;

  Replace Edmund regardless of your username;

  Press ENTER and let roll again.  Once the installation is complete, RESTART your computer.

  You should now be able to install the updates in the control panel and search for updates.  10 minutes or less, you should have a huge list of KBs to download and install.

• Windows 8 will be not updated

  My hard drive had to be replaced in my computer. He was initially under windows 8.1, and all updates were up-to-date.  It is on a 64 bit system. The seller has not received my disc of windows 8 and windows 7 pro has been installed.

  I have re-installed windows 8 pro and begun the process of updating the widows to restore to windows 8.1.  I was not able to be updated, as when the updates are installed, I am instructed to restart the computer. After the reboot, the updates are configured. During the configuration process, I get the message "configuration of the Windows updates failed, changes back, do not turn off your computer."

  Updates get to where all of a sudden, a message appears updates failed, he could go back to before you try to install the updates.

  I tried unchecking and manually install the updates. This latest effort, I unchecked all but the 5 latest updates, but where they installed quickly, and the computer must be restarted, a new message says "keep your pc connected until this is done, and it has started to install again to install all updates 171.» After he installed all the updates 171, at a time gave a message says "configuration of Windows updates failed, changes in recovery, do not turn off your computer."

  It is a vicious circle, and I can't get windows 8 update to 8.1 as before. Any help would be appreciated.

  Please run a check of system files (SFC) & DISM (if necessary) If you are on Windows 8 or higher 

  
  

  All instructions are in our Wiki article below...
  If you have any questions please ask us for .

  Check the file system (CFS) Scan and repair system files

• My applications, including Windows Store, will be not open.

  I would like to help to try to fix these problems if that is possible since this is the first question, I met with this computer a year and a half of owning. System Restore was the first thing I wanted to try, but after running of the it, it didn't work. Afterwards, I ran the troubleshooter to see if it could find said problems, but I don't know how to fix them. Here are the messages that I received in the report:

  (1) cache of Windows store may be corrupted - no not fixed

  Reset and open Windows Store - complete

  (2) search for the missing or corrupted - files detected

  Repair missing or corrupted - files completed

  Output of the SFC

  Released: Windows Resource Protection could not start the repair service.

  (3) configuration Windows store may be damaged - detected

  Reregister Windows Store - complete

  (4) display card drivers may be outdated - detected

  Search for updated drivers-finished graphics card

  (5) registration for the Service is missing or corrupt - fixed

  Sign up for the service Reset - completed

  I'm on a 64 bit system and at a loss to know what to do as all of these applications have been working well a few days ago. To see the message "Update to 8.1 free" now, but to be able to do anything about it or may not be able to view my photos as I had been is quite frustrating. Any ideas on what to do from here?

  Hello

  I would like the links and check if that helps.

  WIN8: App: modern: Apps do not start if the default registry permissions or the file modified

   

  http://blogs.technet.com/b/askperf/archive/2013/10/11/what-to-do-if-your-Windows-8-modern-app-fails-to-start.aspx

  To do: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  Back up the registry: http://support.Microsoft.com/kb/322756/en-us

  Please update with the status of the issue.

• Files and images folder in Windows Vista will be not open?

  For some reason, my program Windows Vista images files and folders

  will not open or view more?

  Only some are open not all. ??

  You need help

  Thank you

  Hi Laura,

  1. do you get an error message when you try to open?
  2. don't you make changes to the computer before the show?
  
  I suggest you perform the clean boot and check if you are able to open the pictures folder.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: follow step 7 clean boot KB929135 article to reset the computer in normal mode.

• Turn on or off does not not the functionality of the window. It shows not all programs.

  Original title: window function Turn on or off does not.

  In my laptop turn on the features of the window or disable does not.

  When I open it... It shows not all programs... When I bought the laptop for this function, I installed IIS... but now after year not able to see the function...

  System:

  Processor: Intel Core 2 Duo T6400 @ 2 GHz

  RAM: 4 GB DDR3

  System type: 32-bit

  Installed OS: Vista Edition home premium.

  On VMWare - Ubuntu 10.10

  Hello

  I suggest you to try the steps outlined in the article below and check if this help.
  http://support.Microsoft.com/kb/931712

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Windows Explorer - my files not all be listed when I search a file or a picture while working on the web.

  I see all my files in Windows Explorer, but they disappear when I search for them so that in the websites where I want to attach a document or a picture, such as Facebook or Craigslist.  I can see 'Libraries' and 'Users', but in these cases, not all my subfolders and files are available.  This has changed a few days ago.

  Hi Bill,

  To provide the proper resolution, I would need more information on your side.

  1. what web browser do you use?

  2. are you having the same problem on other web browsers?

  3. did you of recent changes on the computer before this problem?

  This problem can occur because of incorrect browser or following problem with some Web sites.

  Method 1:

  Copy some images or files on the desktop and try adding files and images now. Check the status of the issue.

  Method 2:

  Check the status of the issue by doing the same task with different Web site.

  Method 3:
  If you are using Internet Explorer, try disabling add-ons. Check if it helps.

  How to manage add-ons in Internet Explorer 9
  http://Windows.Microsoft.com/en-us/Windows7/how-to-manage-add-ons-in-Internet-Explorer-9

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• Windows Live will remain not connected

  Original title: won't remember

  My account will remain not connected, whenever I go to my email that I resign, even when I check the box to keep me signed.

  Hello

  -What browser are you using to access Windows live?

  -If you use Internet Explorer, then what is the version?

  I suggest you try the following steps if you are using Internet Explorer.

  1. open Internet Explorer, click the Start button. In the search box, and then type Internet Explorerin the list of results, click on Internet Explorer.

  2. press the ALT key then press click on Tools and then click Internet Options.

  3. click on the content tab.

  4. under AutoComplete, and then click settings.

  5 Select or clear checkboxes address bar, Forms, usernames and passwords on formsand ask me before saving passwords .

  6. click OKand then click OK again.

  For more information, visit the below mentioned link:

  http://Windows.Microsoft.com/en-us/Windows7/fill-in-website-forms-and-passwords-automatically

  If the problem persists, I suggest you to ask your question in the windows live forum

  http://windowslivehelp.com/

  Let us know if it helps.

• Xbox on Windows RT music does not all photos in my Home Server Library

  I have about 1 500 CD, torn from the \\homeserver\Music on my Windows Home Server part. The CDs are extracted using the standard - names naming convention and are stored in WMA Lossless format. When I use other music programs (Squeezebox, J.River, Zune, Xbox Music on PC Intel) to analyze my music library, they find all the CD. However, in music of Xbox on Windows RT (I use the RT Surface of first generation 32 GB) is (900 or almost), but not all CD in my music library. Is it possible to force the Xbox Music to re-scan my music library?

  Thanks in advance for any help or advice!

  Hi Odin,

  Problems with Windows Home Server are supported in the TechNet Forums. I suggest you send the request in the TechNet Forums.

  http://social.technet.Microsoft.com/wiki/contents/articles/4287.media-streaming-known-issue-and-workaround-with-Windows-Home-Server-2011-and-Windows-Storage-Server-2008-R2-essentials.aspx

  Hope this information helps.

• When I Boot from my USB key to install Windows XP, it will appear not ALL my partitions to install on... Help!

  Yo yet another problem here: S recently, I copied files XP on USB and all that stuff etc... It will start fine after changing the order of boot on USB but when it asks me which partition to install on, it will say "PARTITION1 - LGUSB (3742MB)"... that's all for me, he said, even after making a new partition called "Windows XP Pro"... any help would be appreciated and I thank you guys for help :) especially when I only just registered to MS Answers... Thank you again :)

  -Program used to copy files from the installer:
  WinToFlash (New Version, beta version)
  ------------------------------------------------------------------USB Used:
  Unknown model - LG USB Flash Drive 4 GB
  -----------------------------------------------------------------
  Computer:
  Acer Aspire One D257

  Your User Guide can be downloaded here:

  http://global-download.Acer.com/GDFiles/document/generic%20UG/generic%20UG_Acer_1.0_A_A.zip?acerid=634394037714025697&STEP1=NetBook&Step2=aspire%20ONE&step3=AOD257&OS=all&LC=en&BC=Acer&SC=PA_7
  Once you unpack, you will have your User Guide:
  GUG_ACER_1.0_ALL_AOD257.PDF
  As you can see, there are different ways to restore your Acer. Yes, one of them involves a USB key. Please indicate what method you use.
  Note it is also a method where you would press Alt + F10 at startup (before Windows has the ability to load) to access the partition of the hard drive recovery.
  Yet once, have backed up all your data?

• Windows AIK will install not even if MSXML 6.0 is installed.

  I need to modify a Windows PE image that I created for the deployment of the image.  Unfortunately I had to reinstall Windows because of a hardware failure and were not able to reinstall Windows AIK.  When I try to install it, I get the error message "before installing the Automated Installation Kit, you must install MSXML 6.0.

  Naturally, I tried to install MSXML 6.0 DVD.  The installation program will not continue because a newer version already exists on the machine.  In fact I already have MSXML 6.0 installed.  The msxml6.dll file version is 6.20.1103.0.

  I think that all this comes from a 'fix' of Microsoft who was required to install Visual Studio 2008 (or MS SQL Server 2005 to be precise).  Due to conflicts between updates of MSXML 6.0 and XP SP3, I had to run some script that they had provided to the SQL installer thing thinking that MSXML 6.0 was not installed (reference KB968749).  I think it is also initially WAIK thinking that it is not installed.

  I tried to contact MS representative gave me the solution, but I have yet to hear back on their part.  Someone at - it ideas?

  Hello
   
  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public.
  Please ask your question on the TechNet Windows 7 Installation, Setup, and deployment forum.
   
  I hope this helps.
   

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• New monitor will display not all resolutions

  Recently bought a new HP monitor # 2210 m, and am running HP Media center m7334n Desktop, Windows XP sp3, ram 2 GB, 2.0 G cpu.

  Problem: that's like half of the resolutions listed in the monitor sheet (there are 11 presets).
  I want to put it in 1280 x 768, but it is not listed as a choice in the display properties.

  I lost several hours with HP technical support (Overseas), and their final decision was that the computer is too old (5 years) to support the new monitor. After I hung up, I realized that the monitor has been able to run on its native resolution of 1920 X 1080. So, how is it not possible to run at a lower resolution?

  Graphics are integrated on the motherboard, so I can't find care about resolution so that it doesn't matter where.
  I've updated the graphics driver and the driver for the monitor.
  I uninstalled the driver for the monitor, computer rebooted, everything is recognized, without yellow exclamation, but still no option for the setting of 1280 X 768.

  How can I get the monitor to display the resolution that it is capable of?

  Thanks for your help

  o.k.

  all tracks have been explored and exhausted.

  the integrated graphics card & monitor drivers have been updated.

  the desired resolution does not always appear in the display properties or the available ATI ads.

  I go to the idea that this particular resolution (1280 x 720) only is simply not supported by the graphics card.

  Thank you for your time & assistance