my software oracle 32 or 64-bit on Windows 2008 server (64-bit)

Similar Questions

• Installing Oracle database 11g Release 2 on Windows 2008 server

  Hi all
  
  Please can someone tell if Oracle 11 g 2 is installable on windows 2008 server? or Oracle plans to release a specific version for the Windows 2008?
  
  Thanks in advance.
  
  Bilal

  http://download.Oracle.com/docs/CD/E11882_01/install.112/e10843/reqs.htm#CHDHGGFE

• Connect to the server, Oracle, 11.2.0.1.0, Windows 2008

  There are two Windows 2008 Server: SIGA (database server), SIMBA (application server).
  
  On GIS, Oracle 11.2.0.1.0 database has been installed. It's tnsnames.ora reads as follows. Execution "TNSPING SIGA" works very well. TNSNAMES is used to resolve the name.
  
  
  GIS =
  (DESCRIPTION =
  (ADDRESS_LIST =
  (ADDRESS = (PROTOCOL = TCP) (HOST = SARABI.lionsland.local.de)(PORT = 1521))
  )
  (CONNECT_DATA = (SERVICE_NAME = ORCL))
  )
  
  The SIMBA, Oracle Client 11.2.0.1.0 has been installed. It's the tnsnames.ora is identical to the above. Running "PING SIGA" works very well. The name is resolved to 192.168.1.201. However, execution 'TNSPING SIGA' fails "12535 TNS Timeout". The track is given below. I don't understand where is the problem.
  
  Michael G. Schneider
  
  
  
  AMT Ping Utility for 32-bit Windows: Version 11.2.0.1.0 - Production on 23-OCT-2010 11:37:11
  
  Copyright (c) 1997, 2010, Oracle. All rights reserved.
  
  -TRACE CONFIGURATION INFORMATION FOLLOWS-
  New flow path is C:\temp\oracle\tnsping.trc
  New trace level is 16
  -CONFIGURATION OF THE TRACE INFORMATION ENDS.
  -THE INFORMATION SOURCE PARAMETER FOLLOWS-
  Attempt to load system pfile source C:\Programme\Oracle\admin\product\11.2.0\client_1\network\admin\sqlnet.ora
  Source of the setting successfully loaded
  
  -> PARAMETER TABLE BURDEN RESULTS FOLLOW < -.
  Load table parameter successful
  -> PARAMETER TABLE has THE CONTENT FOLLOWING < -.
  TNSPING. TRACE_LEVEL = SUPPORT
  NAMES. DIRECTORY_PATH = (TNSNAMES)
  TNSPING. TRACE_DIRECTORY = C:\temp\oracle
  SQLNET. AUTHENTICATION_SERVICES = (NONE)
  -THE SOURCE INFORMATION ENDS PARAMETER-
  -THE CONFIGURATION LOG INFORMATION FOLLOW-
  The log stream will be 'rudder '.
  Validation log stream has not requested
  -LOG CONFIGURATION INFORMATION ENDS-
  
  nlstdipi: entry
  nlstdipi: output
  nnfun2awanm: entry
  nnfgiinit: entry
  nncpcin_maybe_init: default name server's domain is [root]
  nnfgiinit: installation read the path
  nnfgsrsp: entry
  nnfgsrsp: get the path of names.directory_path parameter or native_names.directory_path
  nnfgsrdp: entry
  nnfgsrdp: path of configuration:
  nnfgsrdp: check TNSNAMES element
  nnfgsrdp: defined path
  nnfun2a: entry
  nlolgobj: entry
  nnfgrne: entry
  nnfgrne: will read if path adapters
  nnfgrne: switching adapter TNSNAMES
  nnftboot: entry
  nlpaxini: entry
  nlpaxini: output
  nnftmlf_make_local_addrfile: entry
  nnftmlf_make_local_addrfile: failure of the construction of the local names file
  nnftmlf_make_local_addrfile: output
  nlpaxini: entry
  nlpaxini: output
  nnftmlf_make_system_addrfile: entry
  nnftmlf_make_system_addrfile: file system names is C:\Programme\Oracle\admin\product\11.2.0\client_1\network\admin\tnsnames.ora
  nnftmlf_make_system_addrfile: output
  nnftboot: output
  nnftrne: entry
  nnftrne: original name: SIGA
  nnfttran: entry
  nncpdpt_dump_ptable:---C:\Programme\Oracle\admin\product\11.2.0\client_1\network\admin\tnsnames.ora TABLE has THE CONTENT FOLLOWING.
  nncpdpt_dump_ptable: SIG = (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP) (HOST = SARABI.lionsland.local.de)(PORT = 1521))) (CONNECT_DATA = (SERVICE_NAME = ORCL)))
  nncpdpt_dump_ptable:-TABLE of END C:\Programme\Oracle\admin\product\11.2.0\client_1\network\admin\tnsnames.ora---
  nnfttran: output
  nnftrne: using address tnsnames.ora (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP) (HOST = SARABI.lionsland.local.de)(PORT = 1521))) (CONNECT_DATA = (SERVICE_NAME = ORCL))) for name sarabi
  nnftrne: output
  nnfgrne: output
  nlolgserv: entry
  nnfggav: entry
  nnftgav: entry
  nnftgav: output
  nnfgfrm: entry
  nnftfrm: entry
  nnftfrm: output
  nnfgfrm: output
  nlolgserv: output
  nlolgobj: output
  nlolfmem: entry
  nlolfmem: output
  nnfun2awanm: get the path of the sqlnet.ora
  nnfun2awanm: getting the name of the adapter
  nnfun2awanm: output
  nscall: entry
  nsmal: entry
  nsmal: 216 bytes to 0x2cdfe08
  nsmal: output normal
  nscall: connection...
  nlad_expand_hst: expansion SARABI.lionsland.local.de
  snlinGetAddrInfo: entry
  snlinGetAddrInfo: output
  snlinGetNameInfo: entry
  snlinGetNameInfo: output
  nlad_expand_hst: Add IP 192.168.1.201
  snlinFreeAddrInfo: entry
  snlinFreeAddrInfo: output
  nlad_expand_hst: result: (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST=192.168.1.201) (PORT = 1521))) (CONNECT_DATA = (SERVICE_NAME = ORCL)))
  nladini: entry
  nladini: output
  nladget: entry
  nladget: output
  nsmal: entry
  nsmal: 104 bytes in 0x2ce0390
  nsmal: output normal
  nsc2addr: entry
  nsc2addr: (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST=192.168.1.201) (PORT = 1521)) (CONNECT_DATA = (SERVICE_NAME = ORCL)))
  nttbnd2addr: entry
  snlinGetAddrInfo: entry
  snlinGetAddrInfo: output
  nttbnd2addr: using the IP host address: 192.168.1.201
  snlinFreeAddrInfo: entry
  snlinFreeAddrInfo: output
  nttbnd2addr: output
  nsc2addr: output normal
  nsopen: entry
  nsmal: entry
  nsmal: 996 bytes to 0x2ce0800
  nsmal: output normal
  nsopenmplx: entry
  nsmal: entry
  nsmal: 2120 bytes to 0x2ce0bf0
  nsmal: output normal
  nsiorini: entry
  nsbal: entry
  nsbgetfl: entry
  nsbgetfl: output normal
  nsmal: entry
  nsmal: 84 bytes to 0x2ce1580
  nsmal: output normal
  nsbal: output normal
  nsiorini: exit (0)
  nscpxget: entry
  nscpxget: output normal
  nsopenalloc_nsntx: nlhthput on mplx_ht_nsgbu:ctx = 2ce0800, nsntx = 2ce0bf0
  nsopenmplx: output normal
  nsopen: transport of opening...
  nttcon: entry
  nttcon: toc = 1
  nttcnp: entry
  nttcnp: creates a socket.
  nttcnp: output
  nttcni: entry
  nttcni: Tcp conn timeout = 60000 (ms)
  nttcni: TCP Connect TO active. Switch to the n. b.
  nttctl: entry
  nttctl: definition of connection in non-blocking mode
  nttcni: try to connect you to 528.
  ntt2err: entry
  ntt2err: output
  ntctst: NTTEST list size is 1 - survey not call
  sntseltst: WRITING tests on socket 528
  sntseltst: FOUND: write on socket 528 request
  ntt2err: entry
  ntt2err: soc error 528 - operation = 1, ntresnt [0] = 505, ntresnt [1] = 60, ntresnt [2] = 0
  ntt2err: output
  nttcni: output
  nttcon: output
  NsError: entry
  NsError: nsres: id = 0, op is 65, ns = 12535, ns2 = 12560; NT [0] = 505, nt [1] = 60, nt [2] = 0; ORA [0] = 0, ora [1] = 0, ora [2] = 0
  nsopen: cannot open transport
  nsiocancel: entry
  nsiofrrg: entry
  nsiofrrg: actu = 2ce153c
  nsbfr: entry
  nsbaddfl: entry
  nsbaddfl: output normal
  nsbfr: output normal
  nsiofrrg: output
  nsiocancel: output
  nsvntx_dei: entry
  nsvntx_dei: output
  nsopenfree_nsntx: mplx_ht_nsgbu nlhthdel, ctx = 2ce0800 nsntx = 2ce0bf0
  nsiocancel: entry
  nsiofrrg: entry
  nsiofrrg: output
  nsiocancel: output
  nsmfr: entry
  nsmfr: 2120 bytes to 0x2ce0bf0
  nsmfr: output normal
  nsmfr: entry
  nsmfr: 996 bytes to 0x2ce0800
  nsmfr: output normal
  nsopen: output error
  nsmfr: entry
  nsmfr: 104 bytes in 0x2ce0390
  nsmfr: output normal
  nscall: output error
  nscall: entry
  nscall: connection...
  nsclose: entry
  nsclose: output normal
  nladget: entry
  nladget: output
  nsmfr: entry
  nsmfr: 216 bytes to 0x2cdfe08
  nsmfr: output normal
  nladtrm: entry
  nladtrm: output
  nscall: output error
  nlse_term_audit: entry
  nlse_term_audit: output
  
  Published by: michael.schneider on the 23.09.2010 02:42

  Hi Michael;

  Please check below notes:
  Troubleshooting Guide-TNS-12535 or ORA-12535 or ORA-12170 error [ID 119706.1]
  TNS-12535 / ORA-12535 about connecting to the database [ID 214122.1]
  Open port 1521 on firewall but cannot connect due to errors: ORA-12535, TNS-12203 [ID 361284.1]

  Respect of
  HELIOS

• Slow access to the virtual machine network (Windows 2008 Server 64-bit) Windows 7.

  Hello.

  I have a problem when you access files shared on a Windows 2008 Server 64 bits on a client computer to Windows 7. It takes a long time (up to a few minutes) to for example open a Word file from the network share. It is not always, but quite often.

  This also happens on two different servers client with almost the same equipment. Which is a basic IBM x 3400 with hard drives in RAID. I disabled the feature of unloading TCP/IP on the network inside the VM card.

  Someone has an answer for this? Have I missed something, a configuration perhaps? I'm totally lost here...

  Kind regards

  -Jean-

  Try this fix:

  http://support.Microsoft.com/default.aspx?scid=KB; EN-US; 982860

  Enrico Giacomin

• Failed to open oracle functions after R12 installation on windows 2008 64 bit

  Hi guys
  I installed oracle R12.1.1 on windows server 2008 R2 64-bit, then the application opens but all forms of oracle functions cannot open, the message appear frm-92101, I try the solutions in the net, but no effect and I get another windows which and this message appears when trying to open an another oracle functions
  ""
  program currently running on this computer is attempting to display a message, then
  title of the message:
  E:\oracle\VIS\apps\tech_st\10.1.3\appsutil\jdk\bin\java '-serv ".
  
  
  This problem come when a program is not completely compatible with windows
  ""
  This message when you start windows too, but the path of java inside files of oracle applications, please help me if oracle r12.1.1 compatible with win 2008 64 bit or not?

  I installed oracle R12.1.1 on windows server 2008 R2 64-bit, then the application opens but all forms of oracle functions cannot open, the message appear frm-92101, I try the solutions in the net, but no effect and I get another windows which and this message appears when trying to open an another oracle functions

  Direct installation of R12 on Windows 2008 64 bit is not supported. You install it on a Windows 32-bit operating system, and then migrate to Windows 64 - bit.

  Oracle E-Business Suite installation and upgrade version Notes 12 (12.1.1) for Microsoft Windows Server (32-bit) [ID 761567.1]
  Migration Oracle E-Business Suite R12 to Microsoft Windows Server 2008 R2 [ID 1188535.1]

  Thank you
  Hussein

• Oracle 9.2.0.8 on windows 2008 R2 64-bit client installation

  Dear expert database;
  
  for specific needs, we need to install a client 9.2.0.8 to have connectivity with various databases.
  
  As I am a beginner in Oracle, can you tell me if it's good?
  
  1st part of client install Oracle 9.2.0.1 full (in architecture 32 or 64 bits?)
  
  2. install the patches 9.2.0.8 Group (in the same architecture as the first installation)
  
  3. install Patch 30 with O-Patch
  
  I have a lot of problems to find good sources for the OS/Architecture (windows 2008 R2 64-bit) version, I'm not sure that the old version of Oracle can be installed on this configuration.
  
  Can someone help me and tell me that it is possible to do?
  
  Thank you very much.
  
  Kind regards
  
  Thibaud.

  Salvation;

  I suggest to you please read on

  Client / Server / Support of interoperability between different Oracle Versions [ID 207303.1]
  Note to master for the Installation of the Oracle database [ID 1157463.1] Client

  Respect of
  HELIOS

• Oracle 10g R2 on iScsi Drive (Windows 2008)

  Hi all

  Information about the database

  Version: Oracle Database 10 g Enterprise Edition Release 10.2.0.1.0 - 64 bit

  Operating system: Windows 2003 Server 64-bit Service Pack 2

  Environment: Virtual Machine

  The Oracle database software, and database files are on the IScsi disk. It is recommended to install the software of Oracle database on an iScsi drive. ? Please let me know.

  We are faced with iScsi Drive losing connection problems which lowers the Oracle database and the listening Service.

  Thank you

  Salih

  Oracle does not care what type of storage, it is installed on. PL check the logs of systems for the details of the problems you are having with your choice of storage.

• Oracle 11g client install on crashes windows 2008

  Greetings,
  
  I'm trying to reinstall the client of Oracle 11 g on a Windows 2008 R2 Ent. Server and the installation hangs on the back windows where the last message is:
  
  From Oracle Universal Installer...
  
  Monitor: must be configured to display at least 256 colors greater than 256.    65536 real past
  Preparations for the launch of Oracle Universal Installer from c:\temp\2\OraInstall2012-07-19_12-04-18PM. Please wait...
  
  At this point it just hangs.
  Is there a setting I'm missing?
  I cleaned up the previous installation (directories etc., after you run the deinstall script)
  
  The installActions log file under c:\temp\2\OraInstall < timestamp > display just the first two lines above.
  The installation program creates a < single value > dd_vcredist under c:\temp .txt file that contains the following lines at the end, it seems to stop at this point always.
  Any help would be much appreciated.
  
  + [07/19/12, 12:04:18] finished version checking of Windows Installer. Return code 0 +.
  + [07/19/12, 12:04:18] enter CNavigator::Start +.
  + [07/19/12, 12:04:18] executes all controls +.
  + [07/19/12, 12:04:18] Running system controls.
  + [07/19/12, 12:04:18] SYSTEM CHECK: one instance of Setup running Passed.
  + [07/19/12, 12:04:18] SYSTEM CHECK: rights administrative check Passed.
  + [07/19/12, 12:04:18] SYSTEM CHECK: Minimum NT Version 5.0 spent +.
  + [07/19/12, 12:04:18] SYSTEM CHECK: not runing on 9 x check Passed.
  + [07/19/12, 12:04:18] Running prereq controls +.
  + [07/19/12, 12:04:18] verification of Windows Installer version... +.
  + [07/19/12, 12:04:18] msi.dll loaded ok +.
  + [07/19/12, 12:04:18] looking for: 2.0.2 +.
  + [07/19/12, 12:04:18] Found: 5.0.7601 +.
  + [07/19/12, 12:04:18] Windows Installer version ok +.
  + [07/19/12, 12:04:18] finished version checking of Windows Installer. Return code 0 +.
  + [07/19/12, 12:04:18] PREREQ CHECK: Microsoft Windows Installer 2.0 spent +.
  + [07/19/12, 12:04:18] PREREQ CONTROLS: past +.
  + [07/19/12, 12:04:18] race block controls.
  + [07/19/12, 12:04:18] CHECK BETA: past +.
  + [07/19/12, 12:04:18] enter CNavigator::WindowCreation +.
  + [07/19/12, 12:04:18] enter CNavigator::LoadPages +.
  + [07/19/12, 12:04:18] enter CMsiInstaller::IsInstalled +.
  + [07/19/12, 12:04:18] enter CMsiInstaller::GetProductCode +.
  + [07/19/12, 12:04:18] leaving CMsiInstaller::GetProductCode +.
  + [07/19/12, 12:04:18] leaving CMsiInstaller::IsInstalled +.
  + [07/19/12, 12:04:18] entered Maintenance Mode.
  + [07/19/12, 12:04:18] created page: Page of Maintenance +.
  + [07/19/12, 12:04:18] created Page: Progress Page +.
  + [07/19/12, 12:04:18] created page: final Page +.
  + [07/19/12, 12:04:18] leaving CNavigator::LoadPages +.
  + [07/19/12, 12:04:18] enter CMsiInstaller::RegisterUIInterfaces +.
  + [07/19/12, 12:04:18] leaving CMsiInstaller::RegisterUIInterfaces +.
  
  Thank you
  Alex

  PL, ensure that there are no directories with spaces (e.g. ' install files') being specified or use any where for installation.

  HTH
  Srini

• 64-bit Windows 2008 server host ESX3i

  have a special service that is its own LAN being created.  Completely isolated from the rest of our VI3 infrastructure.   The Department has a host of Dell 32 bit and bought a 64-bit host.   They put on 64-bit host Windows 2008 Standard and that you want to install ESX3i on their 32-bit host because it has 16 GB of memory and the 600 GB drive.   They do not want to spend a lot of money, but it takes a business continuity solution.  Their idea is: use the 32-bit host as a host VMware ESX3i and clone the Windows Server 2008 64-bit as a VM on the 32-bit host ESX3i.  They will do it on a regular basis.  However, there is another idea which they are seized - to buy a license to protect Platespin and perform conversion to protect from the physical server 64-bit to host 32-bit ESX3i on a regular basis (am said that this is possible through PlateSpin).

  Apart from the possibility of Platespin, the real question is: a 64-bit Windows 2008 host can be cloned as a virtual machine to a 32-bit host ESX3i?  If so, this may be a solution for them.

  ESXi can be installed on a x 32 hardware host little but if you need to virtualize x 64 virtual clients, then your material must be x 64 bit compatible.  I'm curious to know if this Platespin product would mask the x 64 requirements that would be cool.  You have to confirm with Platespin sales about your situation before that you want to allow?

  If you found this information useful, please consider awarding points to 'Correct' or 'useful '. Thank you!!!

  Kind regards

  Stefan Nguyen

  VMware vExpert 2009

  iGeek Systems Inc.

  VMware, Citrix, Microsoft Consultant

• Oracle 12 c Standard Edition on Windows 2008 R2 64 bit 12.1.0.1.0

  I have a funny problem here. I installed on Windows Standard edition 12 c and I can connect without any problems by using the command prompt or SQL Developer. The problem I am facing is that, after some time, I can't create a new connection and I am getting a timeout in SQL Developer or nothing happens by using the command line. Connections I created before work always and I see that the database is available - I can run queries in SQL Developer old sessions and everything seems to be there. If I take the database using windows services, then I can create new sessions, reconnect and everything works well. It is the first time I see something like that. Is there something I need to put? A kind of connection pool or something similar.

  Thanks in advance,

  Denes Kubicek

  You need a support account to access the son of MOS. Anyway, I looked in the MOS KB and it seems that the thread has been transformed into a Note:

  Non-anglais 12 c on Windows: by listener connections fail after 2049 attempts (Doc ID 1610310.1)

  And the linked bug is (at 12.1.0.2):

  BUG: 17846528 -CONNECTIONS VIA LISTENER HANG AFTER 2049 ATTEMPTS ON SERVERS NON-ANGLAIS

  The proposed workaound is to create the local "Administrators" Group on the machine.

• Can I download windows 2008 server R2 64 bit Bill through the Internet.

  I bought the copy at retail of windows server 2008 R2 64-bit x. and I send out countries but Server 2008 Media Server is here in India. I want to install this product on this server what can I do. ? can I download the support from the operating system through the internet in its place. ?

  media is here and server in the other place and he wants intallation with in 2 days and I can send media can I download os across the net.

  Help me for this matter.

  No, you can't downloadit. You must purchase the appropriate version.

  Windows Server forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• 4.2 ACS running on Windows 2008 Server 32-bit?

  I have an old 4.2 ACS running on an old Windows Server 2003.  I bring out of the Windows Server 2003 for security reasons.  I know that 4.2 is not supported any longer.  Unfortunately, I don't have time now to migrate from 4.2 to 5.x - and the 4.2 documentation states that it can not operate on any 64-bit OS.

  Did someone knows if ACS 4.2 will be or will not be, running the 32-bit version of Windows Server 2008?

  Of the installation guide States that 2008 standard edition is supported.

  http://www.Cisco.com/c/en/us/TD/docs/net_mgmt/cisco_secure_access_contro...

  Thank you

• After the installation of the driver software my windows 2008 Server gives a blue screen. How can I go bak to original configuration?

  I get a blue screen after installing the drivers for my TM-T88IV from the internet. So I now can't log on because of the blue screen.
  How to return to the original state.

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for Windows Server on TechNet. Please ask your question in the Windows Server général assistnce more far.

• Reports 6i called from Forms 6i, on Windows 2008 (R2) 64-bit

  I installed 6i forms and reports (6.0.8.26.0) on a 64 bit windows 2008 Server. Everything works well except one thing: a form to a preview report or output screen, using Run_Report or Run_Report_Object. The two commands start successful reports database engine. The reports database engine also makes a good connection to the Oracle 11.1.0.7 database. The only thing that is not the case, run the report. In the pane, see the journal of the background reports engine, nothing appears, so the engine is not running only one thing.

  Is there someone who has the same problem and found a solution for this?

  I searched the forum and found a few link below:

  http://66.163.168.225/BabelFish/translate_url_content?.Intl=us & LP = es_en & trurl=http%3A%2F%2felfeme.googlepages.com%2fnn60.zip

  and

  http://66.163.168.225/BabelFish/translate_url_content?.Intl=us & LP = es_en & trurl=http%3A%2F%2felfeme.googlepages.com%2fnnb60.zip

  but I'm not able to download nn60.dll and nnb60.dll.

  Please help me find the nn60.dll and nnb60.dll patch oracle 6i number 3 or before version.

  Thanks in advance.

  Rakesh

  Here:

  DLL - download - 4shared

  Concerning

• Need software driver for Windows 2008 R2

  Pavilian dv6:

  HP Pavilion WB386PA/A5Z91PA #AP

  Recently, I bought this laptop with integrated OS and software Bundle. I wanted to install windows 2008 R2 for SharePoint 2010.

  After the Windows 7 Home Premium I have uninstall and installed a Windows 2008 R2, I could not able to connect the USB or the network.
  It says "Windows doesn't detect a network for this driver." When I checked all devices through the computer to manage menu. All devices are yellow color except the DVD player,

  I tried to update the drivers for my laptop now. How/where/what download?

  GUID me please.

  Hello:

  If you go into your BIOS under the system information window, you should get a model number.

  Or you can use this scan to HP tool to see if you can automatically detect your model number.

  http://h20614.www2.HP.com/ediags/GMD/welcome.aspx?LC=en&cc=us

  Paul