Windows 7.0 Professional, continues to crashing producing Pink Screen of Death with blue go on every start of my PC? any help please?

Similar Questions

• Blue Screen Of Death with Windows Vista

  I am running Windows Vista and after trying to update a NVIDIA Geforce driver, my computer will not start at the top and comes up with the "blue screen of death/Disconnections. Initially it started, but icons were very large and I could finally get the right size. Thought that there was a problem with the driver compatibililty and deleted driver (I think), not knowing that I would not be able to find the original driver. Restarted and it is when I got the dreaded "BSOD" and knew with my computer knowledge, I was in trouble. Tried to reboot and then restart with the Windows disk, with the same results. Past to start in safe mode, normal mode, etc... and does not boot in any mode, when eneter is pushed (of your choice) Unit acts as if it starts successfully, with the small bar down Center of screen scrolling as it should, but then the BOSD rises. Support, not much luck, worked with NVIDIA replaced card video, restarted, same result. Need help please.

  Hello

  Here's a problem similar to yours that I help a CO-OP with.

  See if it helps you too.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system/unable-to-successfully-boot-syste-after-trying-to/14523396-5c88-4460-A29E-87d03fa00074

  See you soon.

• I bought a Windows 7 Home Premium software on disk, however my product inside the box key does not work. Any help please?

  I have recently reinstalled windows 7 Home premium from the disk after deleting the existing partition.  During installation, I entered the key of product inside the box, but I get a message saying that this key cannot be used to activate wondows on this computer.
  Any help please?

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

  or

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• I have a hp scanjet 3400C, but im running windows 7 and can't find the drivers anywhere any help please?

  I have a hp scanjet 3400C, but im running windows 7 and can't find the drivers anywhere any help please?

  I have a hp scanjet 3400C, but im running windows 7 and can't find the drivers anywhere any help please?

  Hello

  It seems that the latest HP published for this model scanner drivers were for Windows XP.

  Software & Driver Downloads Scanner HP Scanjet 3400C - HP customer service:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&lang=en&LC=en&product=61835&task=&

  You can check in the HP Forums for other users who may have solved that problem.

  HP Support Forum - HP Support Forum: http://h30434.www3.hp.com/

  24/7 Online supports for the House and special products of HP:

  http://h10025.www1.HP.com/ewfrf/wc/siteHome?lc=en&cc=us&DLC=en&lang=en&product=top

  Concerning

• I keep losing my internet connection and then my windows firewall was disabled when I reconnect. It doesn't to everyone at home who also use the same connection. Help, please

  I have a wireless router at home and everyone using it without any problems... except me! I continue to get purged from the connection and then I have to turn my windows firewall whenever I have reconnect. It can be very annoying, especially if I'm in the middle of a transaction. Any ideas please?

  Hello

  (1) do you have made no changes before this problem?

  (2) you receive an error message?

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  "Network connection is intermittent (periodically disconnects).

  Network connection problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  If you are able to connect to network after having turned off the windows firewall, and then add an exception in the windows firewall.

  http://Windows.Microsoft.com/en-us/Windows-Vista/open-a-port-in-Windows-Firewall

  Additional reference:

  http://Windows.Microsoft.com/en-us/Windows-Vista/why-is-my-Internet-connection-so-slow#section_2

  I hope this helps.

• Sonic Mutli - media appears at the beginning of windows. Why what happened? How can I get it to stop? It's very annoying! Tnanks for any help.

  Multi-Media Sonic appears at the beginning of windows. Why is this happening? How can I get this to stop? It's very frustrasting!  Thanks for any help.

  Hi Diamondcane,

  This is the startup item or the service of a program that is installed on the computer.

  I suggest you try the following steps to resolve this problem:

  The computer in the boot and a test

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Continue with the remaining steps to pin-point the program that causes this problem.

  After you determine the startup item or the service that is causing the problem, contact the manufacturer of the program to determine if the problem can be solved. Or, run the System Configuration utility, and then click to clear the check box of the element of the problem.

  You may need to update or install a newer version of the program; If you rarely use this software you may want to consider uninstalling.

  Important: n ' forget not the computer to start normal follow step 7 in the link.

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Installed Windows 10. Now cannot open a Word attachment. Microsoft is not going to help with what they say, it's a Firefox issue. Help, please?

  See the question above.
  I have recently upgraded to Windows 10. I can open is no longer Word attachments, sent to me by the customer in their emails. I called Microsoft support and they said they don't support Outlook as and email client. I had hoped the problem was widespread and would have been fixed now, but I do not see again for any help.

  Thanks for any advice that anyone can have.

  Dominic deFazio

  I followed your suggestion, but when he asks what to use to open the doc it gives two choices, 'Word' and 'other '.
  Where is the 'other' and 'Browse' you suggest?

  See pictures attached - they are for the pdf, but 'The other' and 'Browse' the options are the same.

  Location should be here:
  C:\Program Files\Microsoft Office\root\Office15\Winword.exe
  Note: If you use a 64-bit version of Windows with the 32-bit version of Office, the default location includes (x 86) in the path.
  for example: C:\Program Files (x 86) \Microsoft Office\root\Office15\Winword.exe

  However, if you open an another doc word received by email, it is likely that Matt is correct and the word attachment document has been corrupted somehow by scan before opening.

• After you have reinstalled windows 7 on my computer hp laptop, internet wireless does not work. Any help please?

  I have a HP Pavilion g7 - 1205ev laptop with Windows 7 64 bit Home Premium edition.

  I bought a new hard drive, so I had to reinstall Windows.

  After installation, the laptop cannot connect to internet by wifi or Ethernet. After trying the troubleshooting it says that windows do not detect a network card installed properly.

  In the Device Manager, I see that there is an exclamation to these exact components:

  Standard VGA graphics card

  BCM20702AO

  Ethernet controller

  Network controller

  PCI device

  PCI Simple Communications controller

  SM Bus controller

  Download all these somewhere? And of course I'll upload them to another PC that my laptop will not at all online.

  I also tried to run Ubuntu from a flash drive on my laptop and the Ubuntu uses the Internet very well. (If this information is useful at all)

  Can someone tell me what to do? I'd appreciate any help. Thank you.

  Hello:

  Here are links to the drivers you need...

  First, install the smbus controller driver and restart.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-94402-1&CC=US&DLC=en&LC=en&os=4063&Product=5169977&sw_lang=

  Then, install the graphics driver and restart.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-99756-1&CC=US&DLC=en&LC=en&os=4063&Product=5169977&sw_lang=

  Ethernet controller:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-100017-1&CC=US&DLC=en&LC=en&os=4063&Product=5169977&sw_lang=

  Network controller:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-95652-1&CC=US&DLC=en&LC=en&os=4063&Product=5169977&sw_lang=

  BCM20702AO:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-101140-1&CC=US&DLC=en&LC=en&os=4063&Product=5169977&sw_lang=

  Comms Simple PCI:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-94325-1&CC=US&DLC=en&LC=en&os=4063&Product=5169977&sw_lang=

  Dev PCI:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-100467-1&CC=US&DLC=en&LC=en&os=4063&Product=5169977&sw_lang=

• Error 0 x 80070079 windows 7 x 64 win7 - when you try to copy large files to USB. The semaphore timeout period has expired. Help, please!

  Any file larger and begins to copy and Quen stops about 95 to 98% before its finshed. This is some time and comes back with an error 0 x 80070079: the semaphore timeout period has expired. If I boot in safe mode, I get the same thing. I applied http://support.microsoft.com/kb/976972 and it did not help me. Help, please!

  I have Dell XPS9000, Win7 Premium, x 64, I7/920, Nvidia 260, 12 GB of RAM

  Hello

  Thanks for the reply Thahaseena. I think a lot of people have the same problem and it's partially the fault of Microsoft. It is the solution of the problem that works for most people if the heart of the problem is corrupt USB driver (s). The USB driver might get damaged due to defective USB device. This was my case. I bought the 16 GB Sandisk USB which has serious problems. It seems that it is real default, rather than fake. However, I am still investigating.

  This is what happens:

  -Start the copy of the file and at one point gets stuck. After all, you get that infamous error 0 x 80070079. If you try to shoot this defective USB before the error pops out, it's really dangerous abduction of USB that could cause corruption of the driver for the USB controller. This happened to me. So, after this point, none of the USB devices will be capable of the greatest copy files 1 GB +, because my USB drivers are now corrupt and and the transfer is slower. Fast devices and more small files work great, but if you have low speed USB 2.0 device it will not be able to complete the transfer of files at one time and you will receive the error.

  Solution:

  -Stop using the defective device to avoid a repetition of the problem (if you know who is defective). If you do not know, must be eliminated one by one.

  -Disconnect all USB cables except the keyboard cable (at least that is not based USB)

  -Use tabs and the arrows on the keyboard to get to Device Manager

  -Remove all usb drivers, including the one that is connected to the keyboard

  -You may need to force the closure - the dawn of the computer.

  -Do not turn on computer. Get on your knees and unplug the power cord. If you forget this step, the process of booth PC will load faulty driver again. (faulty or bad it depends on the scenario)

  -By unplugging the power cord and let it stay for at least 5 minutes, you force your PC to renegotiate the devices and drivers

  -Connect all USB cables

  -Check the usb status icon in the status bar. Sometimes, you may need to restart the computer if windows asks you to do. Restart the computer if you are not sure what I'm talking about.

  - and... Here we are. Bingo!

  Now, if you plug the faulty device once again, you will need to repeat the process. However, in my case I return to the seller or the manufacturer for repair. You can use this procedure to force the outcrop of USB drivers. That's why I say I blame partially Microsoft for that matter because there is no utility or command available to force this action automatically do that when the problem occurs. This could potentially help people with the question when a few USB ports stop working if its pilots involved.

  If it worked for you, please press useful Votes.

  Thank you.

  Ntongo

• Windows 7 32 bit continues to crash (Blue Screen of Death) during various activities of Internet Help!

  Maybe a few Facebook pages or other pages with lots of images and when you use the services of torrent.

  Here are a few crash dump files do not know if this helps:

  https://www.dropbox.com/s/aagjglokvol938j/071614-20420-01.dmp

  https://www.dropbox.com/s/zxn751d8brlgnh4/071714-22588-01.dmp

  also, I managed to get a peak at one of the BSOD:

  

  JPM

  These were related to RTL8187Se.sys RTL8187S PCIE NDIS Driverr of Semiconductor Corporation.  Yours is 4 years and more.  I'd install the most recent driver available.  If he doesn't step most recent drivers you must reinstall anyway as drivers become corrupt it.

  Microsoft (R) Windows debug 6.3.9600.17029 AMD64 Version
  Copyright (c) Microsoft Corporation. All rights reserved.

  Loading dump file [C:\Users\Ken\Desktop\071714-22588-01.dmp]
  The mini kernel dump file: only registers and the trace of the stack are available

  Symbol of validation of the path summary *.
  Location of response time (ms)
  C:\Users\Ken\Desktop OK

  Symbol of validation of the path summary *.
  Location of response time (ms)
  Deferred SRV * H:\symbols* http://msdl.microsoft.com/download/symbols
  Symbol search path is: SRV * H:\symbols* http://msdl.microsoft.com/download/symbols
  Executable search path is: C:\Users\Ken\Desktop
  Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) free x 86 compatible
  Product: WinNt, suite: TerminalServer SingleUserTS
  By: 7601.18409.x86fre.win7sp1_gdr.140303 - 2144
  Computer name:
  Kernel base = 0x82e05000 PsLoadedModuleList = 0x82f4e5b0
  The debugging session: Thu Jul 17 01:03:26.051 2014 (UTC - 04:00)
  System Uptime: 0 days 0:07:46.643
  Loading the kernel symbols
  ...............................................................
  ................................................................
  ..............................
  Loading user symbols
  Loading unloaded module list
  ......
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  Use! analyze - v to obtain detailed debugging information.

  Bugcheck C2, {99, 8d156ce0, 0, 0}

  WARNING: Unable to verify timestamp for RTL8187Se.sys
  ERROR: Module load completed but symbols can be loaded for RTL8187Se.sys
  Probably caused by: RTL8187Se.sys (RTL8187Se + a50d)

  Follow-up: MachineOwner
  ---------

  3: kd >! analyze - v
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  BAD_POOL_CALLER (c2)
  The current thread is doing a bad pool request.  In general, it is an IRQL bad or double freeing the same allocation, etc.
  Arguments:
  Arg1: 00000099, try free pool with invalid address (or corruption in pool header)
  Arg2: 8d156ce0, free address
  Arg3: 00000000, 0
  Arg4: 00000000, 0

  Debugging information:
  ------------------

  FAULTING_IP:
  NDIS! NdisFreeMemory + 16
  8b0a3135 eb23 jmp ndis! NdisFreeMemory + 0x3b (8b0a315a)

  BUGCHECK_STR: 0xc2_99

  CUSTOMER_CRASH_COUNT: 1

  DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT

  Nom_processus: firefox.exe

  CURRENT_IRQL: 2

  ANALYSIS_VERSION: 6.3.9600.17029 (debuggers (dbg). 140219-1702) amd64fre

  DPC_STACK_BASE: FFFFFFFF8D157000

  LAST_CONTROL_TRANSFER: from 8313bf03 to 82ee3bfc

  STACK_TEXT:
  8d156bdc 8313bf03 000000c 2 00000099 8d156ce0 nt! KeBugCheckEx + 0x1e
  8d156bfc 82ef5247 8d156ce0 8d156cd8 000001ff nt! VerifierBugCheckIfAppropriate + 0 x 30
  8d156c10 82f25ff9 8d156ce0 000008 has 8 00000000 nt! VerifierFreeTrackedPool + 0 x 24
  8d156c80 8b0a3135 8d156ce0 00000000 8d156ca8 nt! ExFreePoolWithTag + 0x53e
  8d156c90 d 9949950 8d156ce0 00000000 00000030 ndis! NdisFreeMemory + 0x16
  WARNING: Information not available stack unwind. Sequence of images may be wrong.
  8d156ca8 994a10c4 8d156ce0 00000030 RTL8187Se 8d156ce6 + 0xa50d
  8d156cd8 994bc4ef 852798b 0 86 b 36386 86b 36386 RTL8187Se + 0x120c4
  8d156d00 994bc61c 86e32000 86b 36386 RTL8187Se 86e32673 + 0x2d4ef
  8d156d1c 994be8ba 86e32000 86e1b708 86e32000 r8187se + 0x2d61c
  8d156d38 994 has 0543 00000080 RTL8187Se 00000000 867380e0 + 0x2f8ba
  8d156d50 8b0ec89a 86e32000 8d156d7c 00000000 RTL8187Se + 0 x 11543
  8d156d8c 8b0ce1bd 86b36e4c 00b36e38 00000000 ndis! ndisMiniportDpc + 0xe2
  8d156dec 8b09dfbb 86b36fd0 8d156e70 00000000 ndis! ndisQueuedMiniportDpcWorkItem + 0xd0
  8d156e08 82e7e4d9 860abfe0 70fa6ece 00000000 ndis! ndisPeriodicReceivesTimer + 0xce
  8d156e4c 82e7e47d 8 d 136120 8d156f78 00000001 nt! KiProcessTimerDpcTable + 0 x 50
  8d156f38 82e7e33a 8 d 136120 8d156f78 00000000 nt! KiProcessExpiredTimerList + 0 x 101
  8d156fac 82e7c4ce 000074d 8 9bdc9d34 00000000 nt! KiTimerExpiration + 0x25c
  8d156ff4 82e7bc9c 9bdc9ce4 00000000 00000000 nt! KiRetireDpcList + 0xcb
  8d156ff8 9bdc9ce4 00000000 00000000 00000000 nt! KiDispatchInterrupt + 0x2c
  82e7bc9c 00000000 0000001 has 00d6850f bb830000 0x9bdc9ce4

  STACK_COMMAND: kb

  FOLLOWUP_IP:
  RTL8187Se + a50d
  9949950d?              ???

  SYMBOL_STACK_INDEX: 5

  SYMBOL_NAME: RTL8187Se + a50d

  FOLLOWUP_NAME: MachineOwner

  MODULE_NAME: RTL8187Se

  Nom_image: RTL8187Se.sys

  DEBUG_FLR_IMAGE_TIMESTAMP: 49a5fef3

  FAILURE_BUCKET_ID: 0xc2_99_RTL8187Se + a50d

  BUCKET_ID: 0xc2_99_RTL8187Se + a50d

  ANALYSIS_SOURCE: KM

  FAILURE_ID_HASH_STRING: km:0xc2_99_rtl8187se + a50d

  FAILURE_ID_HASH: {ff80d01c-91aa-4873-3e2c-7354a38e41a0}

  Follow-up: MachineOwner
  ---------

• Windows Explorer crash at the start of my computer. Help please.

  I use Windows Vista. I created a folder for school stuff and now whenever I start my computer, it says repeatedly that windows Explorer has stopped working and tried several times to restart. Its a cycle without end I would appreciate help on this issue and in advance, thank you.

  Hi Schrödingers, cat

  ·         Do you have a task scheduler to restart the computer?

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: I suggest you perform the clean boot and check.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: If the problem persists then try the SFC (System File Checker) scan on the computer.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

   

  I hope this helps.

• I seems to have lost the window "cut all my photos" by sending a photo. This of course means that the pictures take more time to download and use a lot of my internet time. Any help please?

  I tried to fix this feature running again the installation disc.  However if I had continued with that Ihad completely and then reinstall XP and I didn't do

  Hi iriskitchen,

  ·         What email program are you using?

  ·         What is Microsoft Outlook? If so, which version?

  Check out the following link and see if it helps.

  Reduce the size of pictures and attachments - Outlook - Office.com

  If this is related to Microsoft Office Outlook, then I would suggest that you post your question once again on the forums of Microsoft Office Outlook here.

  If this isn't the case, reply with more information, so we can help you best.

• With Windows XP SP2, when 1996 install Greetings Workshop, I get an evil with the database error. This program works on any system there including other XP systems. So what's so weird on this one office computer?

  Has anyone seen this before problen? Thank you.

  Set memory size to 786 mb or less, 787 MB or superior does not. You can find more information here:- http://bit.ly/biEeTv

  Try setting virtual memory to 786 mb or less.

  Windows XP

  1. Click Start, right-click my computer, and then click Properties.
  2. In the System Properties dialog box, click the Advanced tab.
  3. In the results pane, click settings.
  4. In the Performance Options dialog box, click the Advanced tab.
  5. In the virtual memory section, click change.
  6. Change the initial size value and the value of the maximum size to a value above, click onthe valueand then click OK.
  7. Click OK to close the Performance Options dialog box, and then click OK to close theSystem Properties dialog box.

• I use Windows 7. The CPU usage is almost constantly at 100% causing comp running very slowly and often freeze? Any help please?

  model of a few months. Using Bullguard as an anti virus protection.

  Sunday, October 10, 2010 10:28:47 + 0000, merley29 wrote:

  model of a few months. Using Bullguard as an anti virus protection.

  I've never heard of Bullguard, and he certainly isn't one of the
  best antivirus products.

  My guess is that you are infected with malware.

  For an anti-virus program, I recommend eSet NOD32, if you're ready
  to pay for it. If you want a free anti-virus, I recommend one (are not
  run several) of the following three:
   
  Avira AntiVir
  Avast
  Microsoft Security Essentials
   
  You also need anti-spyware software. I recommend that you download and
  (both freeware) to install MalwareBytes AntiMalware and
  SuperAntiSpyware.

  Ken Blake (MS-MVP)

• I'm trying to upgrade a computer to windows 7 32-bit to windows 8. However, he tells me to uninstall Trend Micro before, but I can't find espadrilles to uninstall. Any help?

  I can't find any reference to the espadrilles.  I remember never install a copy.

  Hi Billy,

  I think you mean Trend Micro (or the fact that I could not find any "Trend Micro").  Please see if the following is helpful: http://esupport.trendmicro.com/solution/en-us/1056551.aspx.

  If this does not work, then please try http://www.appremover.com/ and use the two methods if necessary to find and remove the AV programs on your system (which should include everything that is).

  Good luck!

  Kosh