Windows 7 64 bit 6 GB of Ram but only 3GBs of ram can be used

Similar Questions

• I installed windows 7 32 bit on my computer. But I want only to 64-bit

  I installed windows 7 32 bit on my computer. But I want only to 64-bit. But unfortunately I lost the installation disc. How can I upgrade?

  For 5 years, Microsoft made it fairly easy for users of the Windows 7 operating system to get reinstall media. If you have lost your support disc or installation retail collection; either it has been damaged or defective; You can download a copy of the edition that you have licensed from a membership site called Digital River. More recently, Microsoft ended the availability to reinstall media that you can download as a. File ISO in Digital River, which is a digital reproduction of an optical disc.

  It was particularly convenient for people who could not easily get the manufacturer's recovery media, did not want to pay the fees required to get or preferred a clean configuration without the software packaged manufacturers or even a recovery partition does not work. It's easy to use, all you had to do was reinstall and reactivate using the product key located on the certificate of authenticity and download all the drivers on the manufacturers website.

  Given that this option is no longer available, what are your options? See the article for more details:

  How to: What are my options for Windows 7 reinstall media?

  You will need to do a clean install, there is no place on the way to upgrade Windows 7 32 bit to 64 bit.

  Using the disk of 64-bit Windows 7, install Windows 7 Windows Easy Transfer Utility from the DVD (to find it, simply navigate to x:\support\migwiz, "x:" is the name of your hard drive. (In this case, you will see a collection of files, the important"that you must search for and double-click is 'migsetup'.) run it and create a DAMP (Windows Easy Transfer file), if you have an external hard drive, you can access it later when you perform a clean install of Windows 7 64-bit disk so you can stored there.

  Once you have done this, just do a clean install of Windows 7 64 bit disc. In Windows 7 64 bit disk, start Windows Easy Transfer, follow the wizard screen, tap on which is stored the WET file (external hard drive) and it will restore your personal files and settings. Reinstall the applications needed.

  http://www.notebooks.com/2009/10/07/using-Windows-easy-transfer-in-Windows-7/

  Boot from the Windows 7 DVD
  Click Install now
  Accept the license agreement
  When the option is displayed to select a type of installation, click (Custom advanced)

  Select the disk partition where you want to install Windows 7 click Next.

  You will receive the following warning:

  The partition you have selected may contain files from a previous Installation of Windows. If so, these files and folders will be moved to a folder named Windows.old. You will be able to access the information in Windows.old, but you will be able to use your previous version of Windows.

  (At all costs, do NOT click on anything in Format, deletion or Partition name.) So even do a custom installation, your personal files are still kept. Click OK

  The installation program will now begin installation. During installation, your computer will be restarted several times.

  Once the installation is complete, you can complete the Out of Box experience as the choice of your laptop, create a username, password, your time zone. You can then proceed to download the latest updates for Windows and reinstall your applications and drivers.

  You can then retrieve your personal files from the Windows.old folder and reinstall all of your applications and drivers.

  http://notebooks.com/2010/11/09/how-to-recover-documents-music-and-email-after-upgrading-with-the-Windows-old-folder/

• 15 - n066us the amount of ram can I used.

  How much ram can I use about 15-n066us.

  As you can see in the image below, it depends on the wheher, the OS is 32 or 64 bit. There is no explanation in the guide of what HP means by some models in this case.

  Maintenance & Service Guide

  

• my laptop is hp 3020ee I update the hard disk of 500 GB to 6 GB patriot ram can I use recovery disk

  my laptop is hp 3020ee I update the hard disk of 500 GB to 6 GB patriot ram can I use 5 recovery disks

  Yes, you should be able to use the recovery discs.

• use 64-bit for what is faster our pc or games? using 64-bit 4 GB ddr3 ram can I fast performance or using 32-bit 4 GB ddr3 ram also gives the same speed?

  Hello!

  I am a bigger fan of microsoft and want to work with you all but my age is not perfect for working with you all, so, for now I just know every thing about windows...

  (1) use 64-bit 4 GB ddr3 ram me gives better performance than 32-bit...

  (2) is of 32-bit is good for the day of work and game performance...

  (3) I am using windows 7 ultimate

  Thanks for the answer...

  With only 4 GB it is not to change to 64-bit because it actually uses the more than 32-bit ram.

• My HP Pavilion dv6 on occasions stops to avoid overheating. My OS is windows 7 (64-bit), I cleaned the vents and the fan. How can I check cooling fan is working correctly

  My laptop HP Pavilion dv6 shutsdown to avoid overheating. My OS is windows 7 (64-bit). I cleaned the vents and cooling fan, but I continue to have problems with closing to avoid overheating.

  Is there a test I can perform to verify that the cooling fan is working properly. All of the suggestions. Thank you

  You can use speedfan http://www.almico.com/speedfan.php

• Satellite M70-192: what modules of RAM can I use?

  I would like to know what type of RAM I could use with my M70-192. I need to add another 512 MB module. So, for example is compatible kingston more or Micron or what?

  I can't find Toshiba around the House me...!

  Hello

  The unit uses DDR2 memory strips and you can use this module:
  512 MB DDR2-400/533 (PA3412U - 1 M 51)

  What you can do is google for this module, or you can order from the Toshiba service partner.

• Do a right click on desktop freezes computer, Windows explore and Dr. Watson as time stop working. Only Ctrl + Alt + Delete can be used to reset the computer

  original title: right clicking on desktop freezes the computer, Windows explore and Dr. Watson times stop working.  Only Ctrl, Alt, Del to reset computer

  Make a right click on desktop freezes the computer.  Explorer Windows and Dr. Watson stop working. Only Ctrl, Alt, Del restarts computer

  Hi Ken1948,

  1. did you of recent changes on the computer?

  2. you receive the error message?

  3 when was the last time it was working fine?

  Check if the problem persists in safe mode.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

• Satellite C660 - Windows 7 64 bit BSOD after upgrade RAM

  Hi guys

  my laptop Specs: Satellite C660-1JG
  -Genuine Windows® 7 Home Premium 64-bit (pre-installed, Toshiba-HDD recovery)
  -Intel® Celeron® Processor T3500
  -2048 MB of RAM DDR3 (800 MHz).

  recently I increase my RAM to 4 GB (2 + 2 GB), since its installation, as soon windows7 64 bit beginning of loading, finished with BSOD. load BSOD Windows sometimes very well, but in a minute or two appears. I can confirm that it does not read the total RAM of 4 GB, I checked while the laptop was about 2 to 3 minutes ON. then I go out 1 RAM stick laptop is fine, no BSOD!

  so question raises if the RAM is at fault, incompatibility etc, but I have the dual boot OS and other OS is Ubuntu 11. who reads the 3.84 GB RAM and without crashing or BSOD or any question.

  Then I installed Windos 7 32 bit to see if that still has problems with 4 GB of RAM, but NO, 32 bit reads RAM 4 GB (usable 2.8 GB). without crashing or BSOD with 32, only problem with windows 64-bit version!
  I checked the specification it says Max RAM 4 GB Ram and yes it supports 4 GB RAM with Linux and win7 32-bit.

  I tried to update BIOS version 1.20 (currently on 1.40), but still got error: Firmware has no support of Flash (AFUWINGUI).
  I was wondering if any of you can guide me to the right direction.
  Thanks in advance
  Concerning

  I can't say for sure, but perhaps BSOD due to a compatibility issue.
  What RAM you bought as add-on (brand and specification)?

• 3 1 GB / 8 GB of ram can be used on Windows 7 64 bit

  Hello

  I recently bought a new W510 with windows 64-bit, and 8 GB of ram, however, both in the Task Manager and resource monitor, the available RAM is said to be about 3 GB. In the resource monitor, a massive 5 GB is "reserved equipment." The W510 has a discreet graphics card, I doubt that any amount of material would require 5 GB of memory reserved.

  Does anyone know how to remedy this?

  So, I'm a bit disappointed by the fact that the computer came with 30Gb (!) already used hard drive, and which excludes the 10 GB recovery partition. I wasn't aware that Lenovo tends to install on computers.

  Finally, the left click is very sticky and often will be stuck down. The computer is new, and frankly I'm a little disappointed that the mouse does not work properly.

  Dfarce

  The memory is a known issue with the bios.20 and has been resolved if you install the latest version of the bios (.24 I think)

• Tecra A9 - shows only 2.99 RAM can be used on Windows 7 64 bit

  Great running except the RAM machines show only 2.99 GB usable on a total of 4 GB installed. I know it must re-mapping of memory, but I can't find any information to enable this or even if this machine can support?

  Can it be supported natively, or with an update patch or BIOS/driver, I think that the BIOS is 1.6.

  Thanks in advance.
  John.

  Hello

  The amount of RAM is recognized in the BIOS? It shows the full capacity of 4 GB?

  Theoretically, updating the BIOS could be worth a try. I put t know which model you have exactly but European models the BIOS update can be downloaded here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

• HP 650 with 4 GB of Ram can be used with Windows 7 32 bit installed showing 929 MB

  Hello Admins, please I have a 650 Hp Notebook PC with 4 GB of Ram installed but its usable MB 929 display are the following details of my PC.

  Graphics card: Intel HD Graphics 3000

  Chip type: Intel(r) HD Graphics Family

  Amount of video memory available: 272 MB

  Dedicated video memory: 64 MB

  Video memory: 0 MB

  Shared video memory: 208MB

  Please help solve this problem, this article is somewhat like linked to a correction of a problem on the support on this link Center

  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/KB/docDisplay/?sp4ts.Oid=5296216&SPF...

  Thank you and waiting for your urgent response.

  Kind regards.

  Hello

  With respect to the link below, this problem is reported to have been fixed by the version of the Bios F.36 of bios (see revision history) - updates are cumulative, so you should be able just to Flash the latest version (F.39).

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5225013&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_135015_1%257CswEnvOID%253D4061%257CitemLocale%253D%257CswLang%253D%257Cmode%253D5%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  Kind regards

  DP - K

• I'm starting to see the error message js / ff_browser:203 that appear. It is random. It is a PC with Windows 7, 64 bit and firefox 7.01. the only recent change is a download of an update to Java. is there an easy way to fix it?

  as explained in the question, this is an instance of the ransom and requires me to click on "continue" or "quit". Select 'continue' just seems to allow firefox to do what I wanted to do.

  I am running windows 7 Professional 64 bit and Firefox 7.01.

  Probably caused by an add-on.
  
  What is the rest of this message chrome://...js/ff_browser:203 ?
  
  Tell us of what Add - it is involved.

  Otherwise, you can do some troubleshooting to find out the cause.
  
  http://support.Mozilla.com/en-us/KB/troubleshooting+extensions+and+themes

• I want to install my photoshop 5.0 but limited edition pc screens, I have to check if it is a 32-bit or 64-bit application. I changed my windows XP to win7 64-bit operating system (I think that's the problem) how can I use my photoshop on this system?

  I want to install my photoshop 5.0 but limited edition pc screens, I have to check if it is a 32-bit or 64-bit application. I changed my windows XP to win7 64-bit operating system (I think that's the problem) how to install and run my photoshop 5.0 the on this system?

  It is no longer available via adobe and if buy you it to someone else, that you will probably have problems running.  I think that it is compatible with win 98 but I don't know if it's available for you using compatibility mode.

• Why not my full amount of RAM can be used in my 64 bit OS?

  

  Here the properties of my graphics card...

  

  I want to know what are the things using my 0.1 GB of RAM? If graphics card uses shared memory shared memeory > 0.1 GB how it happened?

  Some memory is allocated to material resources, you can not change this