Windows 7 (64 bit) - smartmenu does not

Similar Questions

• Mr PRESIDENT, MY WINDOWS 7 32 BIT PC does not support to open 'Copy trans drivers install' to copy doc, to the iphone

  Mr PRESIDENT, MY WINDOWS 7-32 BIT PC does not support to open 'Copy trans drivers install' to copy doc, to the iphone

  Please help me solve this problem.

  Hello

  Thanks for posting the query on Microsoft Community. I'm happy to help you on this.

  I appreciate if you could answer a few questions to refine the question and provide you with better assistance.

  • Did you change the system before this problem?
  • Do you receive an error message when you try to open it?
  • Have you checked in uninstalling and reinstalling the application?

  If this isn't the case, I suggest you to uninstall the 'trans driver install' and reinstall it again and check if it helps.

  Meet us with information, so that we can better help you.

  Thank you.

• Windows 7 64 bit, Winupdate does not.

  Hi, I asked to make a new specific thread for my question.

  I have an Acer Aspire 5741 G computer laptop that I bought 3 days ago, I had Windows 7 Home premium (64-bit), and I can't use windows update. It came with Mcafee antivirus and some internet Norton Security, I uninstall both right to the race start, I don't like one of them.

  I don't have any other firewall or antivirus on the computer, except windows defender that I don't know how to disable.

  1. download and Save AppRemover

  2. Although this page States that the Fixit does not apply to Windows 7, this is the case, download and Save it.
  http://support.Microsoft.com/kb/971058

  3. once download completed, read this - using AppRemover

  4. Configure the boot cleaning system

  5. once the system has been rebooted to clean boot state, run AppRemover, choose remove a security application and remove any debris detected McAfee and Norton.

  6. now run MicrosoftFixit50202.msi and choose his Aggressive mode with the system connected to the internet.
  Restart the system for the clean boot state, once it is completed.

  7. see if the system can search for and detect the updates needed now by opening Windows Update in Control Panel.

  8. If the system can find and detected the necessary updates, you can either try to download and install while remaining in the clean boot state, or configure the system to boot into normal mode of Windows and see if she can find, detect, download, and install necessary updates.

  9. you must always install antivirus software. Avast and Microsoft Security Essentials are both free, reliable and works well with Windows 7.
  Then create a Standard user account in order to avoid most malware infections that are caused by vulnerabilities in the OS (approximately 64%).
  Configuring Windows 7 for a limited user account

  MowGreen Services update - consumer safety

• Why windows 7 (64 bit) download does not work for a hp officejet 5610 all-in-one?

  I changed operating systems from XP to Windows 7 (64 bit) on a new Toshiba Portege laptop and downloaded the new drivers from the HP site for my all-in-one Officejet 5610.  Nothing went well.  I can print but not scan, and often copy is extremely slow for no apparent reason.

  I deleted the driver downloaded several times and re-uploaded to start from scratch, but get the message "Fatal error during installation."  I used HP correction for this, did everything it says and ran the download as an administrator.  When the "USB connection" screen, I connect the USB as requested, and I hear my computer accepts this connection.   But the HP installer does not accept or acknowledge inserting the USB key.  It hangs at that time here, and keeps installation disc FOREVER chasing the USB connect screen.

  When I open the HP Solution Center, he informs me that he cannot work because the download of device is not complete.

  There is no file 'help' in the menu 'start '.

  I'm running out of ideas on how to make my printer work properly with the new Windows 7 system.

  Someone at - it suggestions?

  In the case where you hear the ding that the USB cable is connected and that the software does not recognize it, it means that at any given time you connected to the computer via the USB port before running the software. When you do so, Windows takes over and tries to install their own drivers. That causes problems later, when you try to use the software, as it will then not connect when you use the USB cable.

  In this case, you must connect via the usb port and go into Device Manager and remove everything related to your printer. After you do this, unplug the USB cable and restart your computer. When starting BACK, run the software FIRST and then when he asks the USB cord this time, it should recognize the connection.

• I have a Windows XP Home Edition, which does not list if it's 32-bit or 64-bit

  I have an OEM Windows XP Home Edition, which does not list if it's 32-bit or 64-bit. How do I know what

  To check if your XP operating system is 64-bit, you only have to right click on "My computer" and select 'Properties' to display 'system properties '.   If your XP operating system is XP Professional 64-bit, 64-bit will be indicated in the information displayed in the general tab.  However, XP 32 bit operating systems won't have 32-bit, there is no information about this particular point at all.  The XP Home Edition will be 32-bit, but this information does not appear.  XP Professional, however, can be either 32-bit or 64-bit.  If it is 64-bit, it will be indicated on the general tab of the system properties. However, if it is XP Professional 32-bit, nothing is there to indicate that the operating system is 32-bit.

  Vista and Windows 7, unlike XP, OS will indicate if they are 32-bit or 64-bit.

• Try to install Indiana Jones and the infernal Machine, Windows (8 / ME) compatibility mode does not

  I try to install Indian Jones and the Doomsday Machine on my computer.
  I tried using the compatibility mode for windows 98 / ME, but it does not work. When I run the program splash arrives, but when I click on install it closes then nothing happens. There are no errors.
  I am running Windows 7 64 bit.
  Also I install the original CD, and it has worked before in older computers (running Win 98 of course).
  Any help would be appreciated.

  The game should run fine under Win7 64 bit. The problem is that the installer is only 16 bit and is no longer supported in Windows. Just use a different Setup program. Try www.markusegger.at. I'm running the Doomsday Machine, Alliance Xwing, Xwing v's Tiefighter, and Grim fandango all on 64 bit Win7 all using custom Setup programs.

  I also used the original X-wing, Tie-fighter and fate of Atlantis via Dosbox.

• 0x802d007 WinUpdate and BIT error does not work - nothing is fixing.

  0x802d007 WinUpdate and BIT error does not work - nothing is fixing.

  Hello

  (1) what is the exact error code that you get?

  (2) service pack you have installed for XP?

  Method 1: Verify that the services are started
  Make sure that BITS and the automatic updates service are started. To do this, follow these steps:1.Click Start, click Run, type services.msc, and then click OK.
  2. in the list of services, click on automatic updates, and then click Properties.
  3. in the startup type list, click Automatic, and then click on apply.
  4. If the service status is stopped, click Start, and then click OK.
  5.right - click Background Intelligent Transfer Service, and then click Properties.
  6. in the startup type list, click Manual, and then click on apply.
  7. If the service status is stopped, click Start, and then click OK.
  Method 2: You receive an error message "Windows Update has encountered an error and cannot display the requested page" when you try to install an update

  http://support.Microsoft.com/kb/883614

  Method 3: You cannot install updates from Windows Update, Microsoft Update, or by using the auto update after a repair of Windows XP after installing Windows XP SP3 immediately after a clean installation of Windows XP SP2 or

  http://support.Microsoft.com/kb/943144
  
  For reference:
  How to troubleshoot a service that crashes in Windows XP
  http://support.Microsoft.com/kb/934650
  How to resolve problems connecting to Windows Update or Microsoft Update
  http://support.Microsoft.com/kb/818018
  Method 4: How to reset Windows Update components?
  http://support.Microsoft.com/kb/971058
  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  322756 (http://support.microsoft.com/kb/322756/)
   
  Note: You may need the XP disc for some functions in the steps above.
  I hope this helps!

• Modeless window by using the "palette" does not remain upward in CS5

  I have a problem running a modeless dialog box with CS5 (on 64-bit Windows).  My own script does not stay in place and either don't extract of SnpCreateDialog.jsx that comes with the ESTK and is supposed to demonstrate modeless dialog boxes.  I tried:

  1. From the Scripts panel
  2. Add #target photoshop
  3. Be sure that the drop down menu says Photoshop, no CTSK

  as suggested in an older discussion at http://forums.Adobe.com/message/3008230#3008230 .  (I decided to make a new discussion as this one was marked answered.)

  It also does not stay in place when moved to the folder of Photoshop Scripts and run on the file menu in Photoshop.

  The corresponding code in SnpCreateDialog.jsx is:

  function SnpCreateDialog() 
  {
       this.windowRef = null;
  }
  
  /**
   Functional part of this snippet. 
   
   Create a window of type "palette" (a modeless dialog) and display it.
  
   @return True if the snippet ran as expected, false otherwise.
   @type Boolean
  */
  SnpCreateDialog.prototype.run = function()
  {
       // Create a window of type palette.
       var win = new Window("palette", "SnpCreateDialog",[100,100,380,245]);  // bounds = [left, top, right, bottom]
       this.windowRef = win;
       // Add a frame for the contents.
       win.btnPanel = win.add("panel", [25,15,255,130], "SnpCreateDialog");
       // Add the components, two buttons
       win.btnPanel.okBtn = win.btnPanel.add("button", [15,65,105,85], "OK");
       win.btnPanel.cancelBtn = win.btnPanel.add("button", [120, 65, 210, 85], "Cancel");
       // Register event listeners that define the button behavior
       win.btnPanel.okBtn.onClick = function() {
            $.writeln("OK pressed");
            win.close();
       };
       win.btnPanel.cancelBtn.onClick = function() {
            $.writeln("Cancel pressed");
            win.close();
       };
  
       // Display the window
       win.show();
            
       return true;
            
  }
  
  /**
   "main program": construct an anonymous instance and run it
    as long as we are not unit-testing this snippet.
  */
  if(typeof(SnpCreateDialog_unitTest) == "undefined") {
      new SnpCreateDialog().run();
  }
  
  
  

  If I put a breakpoint on the "return true;" line, then I see that the dialog box, in fact, was created and is visible, but he came back to win.show () and will disappear as soon as the script continues.

  Any help would be appreciated.

  Kenneth Evans wrote:

  The advantage of a modeless dialog box, is that you can continue to do things in Photoshop while the dialog box is in place.  At least, I suppose, since I don't have to work, including the example ESTK.

  Sorry but no, most of the Photoshop UI is disabled while a script is running even if the script displays a palette window.

  A dialogue window waiting for show() end. This is what makes the modal dialog boxes. A palette window does not expect show() end. He runs the rest of the script.

  In the example you posted the entire script after the window display is return true, then ends. That is why there is no blink the window. If you put a line of $.sleep (1000) before the real return line, that display the windows until sleep wait times then the script will exit and the window will close. That's why with Photoshop palette windows are really only useful progress bars or other type of script status windows.

  Although windows palette can allow the user to intreact with application UI while the window is displayed and does not work with Photoshop. The window shows only while the script runs and Photoshop UI interaction limited a running script.

  I tested windows palette in CS2, CS3, CS4 and CS5 with the same results. The window shows only while the script is running.

  With Photoshop if you want the user to interact with the user interface you will need to create a Panel.

• Two Windows 7 64 bit updates do not. (KB977074) (KB976972)

  Two Windows 7 64 bit updates do not.

  Update for Windows 7 for x 64-based systems (KB977074)

  Update for Windows 7 for x 64-based systems (KB976972)

  Error details: code A 80071, 90

  It's the third day, they fail to install.

  OS is Windows 7 64 bit

  Processor: Intel Core 2 Quad CPU 2 .40GHz

  Installed memory: 4.00 GB

  How can this be repaired?

  Hello

  Copy the file "C:\Windows\Logs\CBS\CBS.log" (otherwise you can not open it) in your documents folder and open it with Notepad. Now I get errors. Errors that you see?

  André "a programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

  It is correct. I found the answer here http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/6ee6ede7-7f6a-47dc-9562-acd08615532b
  I had to install updates one at a time.

• I have Windows XP Pro on my computer but have now tried to load Windows 8 but I need to remove it again to load Windows 7 Home because most does not

  I have Windows XP Pro on my computer tower but have now tried to load Windows 8 but I need to remove it again to load Windows 7 Home because most does not

  How to perform a new Installation of Windows 7:
  http://pcsupport.about.com/od/OperatingSystems/SS/Windows-7-clean-install-part-1.htm

  How to do a clean install with Windows 7:
  http://www.SevenForums.com/tutorials/1649-clean-install-Windows-7-a.html

  Migration from XP to Windows 7 Easy Transfer and a USB key:
  http://www.howtogeek.com/HOWTO/3179/migrate-XP-to-Windows-7-with-easy-transfer-and-a-USB-drive/

  Windows Easy Transfer for transferring from Windows Vista or XP:
  http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-easy-transfer

  If the family Windows 7 product key was already activated, you need to activate by phone. Both your XP COA / product key and Windows 7 very practical key product and then activate by phone following the steps below.

  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) explain your problem clearly to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  Activation and registration of a Microsoft product
  http://support.Microsoft.com/?kbid=326851
  Windows activation: (888) 571-2048
  (888) 725-1047 or 800-936-5700

  J W Stuart: http://www.pagestart.com

• I have re-installed Windows XP. My wireless does not, any more than my ethernet connection. What should I do?

  I have re-installed Windows XP. My wireless does not, any more than my ethernet connection. What should I do?

  original title: why isn't my laptop recognize the eathernet link?

  Go to your computer manufacturer's support web site
  and search for the Windows XP drivers for your specific computer or motherboard model number.

  If there are Windows XP drivers, then download to a folder on your hard drive and burn it to a CD/DVD.
  Then, after installing XP install all device drivers, start by installing the card mother/chipset driver first,
  then the SATA, Audio, USB, LAN, etc, drivers.

  List of computer manufacturer support sites:
  http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturers

  If you have an Intel motherboard, you can try the Intel driver update utility: http://www.intel.com/support/detect.htm?iid=dc_iduu

  Graphics/video drivers:
  Check the download site of the manufacture of the graphics card for the newer Windows XP drivers for your card.
  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
  NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us

  J W Stuart: http://www.pagestart.com

• I have an acer with SP3 and Windows XP machine. It does not recognize a DVD - RW in my TSST Corp. CD/DVGW TS - L632D

  Original title: DVD problems

  I have an acer with SP3 and Windows XP machine. It does not recognize a DVD - RW in my TSST Corp. CD/DVGW TS - L632D what is the solution. I tried the fix and I also used the Center 'Fix it '.

  Hello

  1 how long have you been faced with this problem?
  2. don't you make changes on the computer before this problem?
  3 are. what patch you referring?
  4. this happens to you with some specific discs?

  Reinstall the drivers for DVD player and check.

  1. click on start > run
  2 type devmgmt.msc and press ENTER. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
  3. in Device Manager, expand CD-ROM/DVD-ROM drives, right click on the device CD and DVD and then click on uninstall.
  4. When you are prompted to confirm that you want to remove the device, click OK.
  5 restart the computer.
  6. when the computer restarts, the drivers will be installed automatically.

• I have a new laptop with Windows Media Player 10, which does not recognize my MP3 player: this has happened once before and I was able to download Windows Media Player 9. Where is he now and can do it again?

  I have a Samsung YP - U2J MP3 player and until I had to buy a new laptop it worked fine with Windows Media Player 9.  The new laptop comes with Windows Media Player 10, which does not recognize my MP3 player that my COMPUTER recognizes it and says everything is fine.  Can someone help me?

  Hello Amaliada,

  Thank you for your message.  We will add your MP3 device manually.  Please follow the instructions below:
  Plug in your mp3 player and open Windows Media Player.
  Click in the empty space (next), then select 'Tools' > select 'Options '.
  Select the "Devices" tab (you see yourself mp3 palyer?) If not, click on "Add" > select "portable music players.
  From there, you will receive information about the addition of your device.

  Please let us know if it did or did not help to solve your problem.

  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• the windows boot configuration data file does not contain a valid entry os

  Hello

  I got this message when recovery... I can't get the windows... I have the CD recovery, but when I boot it... It gives me this message

  the windows boot configuration data file does not contain a valid entry os

   

  
  How do I solve this problem

  Hello

  Assuming that it's just a problem with the recovery media, here's another solution, you can try.

  Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

  An example of a COA label can be seen here.

  You can create a Windows 7 installation disc yourself using another PC - just download the good Disk Image ( it must be the same version that originally shipped with your laptop - IE if your laptop comes with Windows 7 Home Premium, that is the file you need to download ) from the link below and use an app like ImgBurn to burn the ISO correctly file on a blank DVD - a guide on the use of ImgBurn to write an ISO on a disc is here.  The source of the Image is - Digital River.

  Images of Windows 7.

  Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  All pilots additional and the software you may need are located by entering your full model number or Nr here.

  Kind regards

  DP - K

• When you try to import a .mp4 file in windows movie maker, the program does not list the file when I search for it in his file.

  When you try to import a .mp4 file in windows movie maker, the program does not list the file when I search for it in his file.  Help, please.

  As I suggested previously, conversion to a format like
  . WMV before you import it into Movie maker may be the solution.

  The free Converter from Microsoft can be a place to start:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Download Microsoft Expression Encoder 4 with Service Pack 1 (SP1) (freeware)
  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=24601
  (runs under WinXP SP3 / Vista / 7)

  When you install the program...
  Start Microsoft Expression Encoder 4
  (Start / programs / Microsoft Expression /)
  Microsoft Expression Encoder 4)

  On the "Load a new project" screen...
  Left click... "Transcoding project '...

  When the program opens, click on... File / import...

  (If at any time you get lost while browsing
  the program of... to... Window / active Reset
  Type or workspace... CTRL + SHIFT + R)

  Look for the file/s that you want to convert.
  (If files do not appear... open the fall
  window and choose... All files)

  Click (highlight) left the files and the left on the Open button.

  You can see the files in the "Multimedia content" pane

  In the right column... left click on the tab "Output"...

  Open the drop directory window and choose an output folder.
  (This is where you will find your converted file)

  On the left, click on the button "encode".

  Wait... video encoding CPU intensive and can
  be a slow process. It is always best if you do not have
  multi-task while files are encoded.

  Now... try import you again. File WMV in Movie Maker.

  More converters:

  There are to many converters available on the net...
  the following links are some examples. You can
  need to experiment to find the best result.

  Proceed at your own risk *.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  (1) format Factory (freeware)
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster)
  (the file you want to download is: > FFSetup270.zip<>
  (FWIW... installation..., you can uncheck
  'all' boxes on the last screen... even in this case, it may
  install the Ask toolbar on your system)
  (Windows XP / Vista / 7)

  First, you will need to decompress the file or just open the
  Drag FFSetup270.exe out of the folder
  and drop it on your desktop. To install left click.

  (2) Freemake Free Video Converter (freeware)
  http://www.Freemake.com/free_video_converter/
  (Windows XP / Vista / 7)

  (3) Koyotesoft Free Video Converter
  http://www.koyotesoft.com/indexEn.html
  (2000/XP/2003/Vista/Seven)

  (4) Sothink Free Video Converter
  http://www.Sothinkmedia.com/video-converter/
  (Windows XP / Vista / 7)

  (5) hamster Free Video Converter
  http://www.PCWorld.com/downloads/file/FID, order 155794, 4 pages, 1/download.html
  (Windows XP, Vista, 7)
  (If you choose Custom Installation
  You can uncheck additional modules you
  do not want to install)

  (6) quick Media Converter
  http://www.Cocoonsoftware.com/
  (Win XP, Vista, Win 7 Home Premium)

  (7) SUPER © Simplified Universal Player Encoder & Renderer
  http://www.videohelp.com/tools/Super
  (the download mirror site is faster) (Windows XP / Vista / 7)

  (8) Xilisoft Video Converter
  http://www.Xilisoft.com/video-converter.html
  (not freeware but receives good reviews)
  (Windows XP (SP2 or later) / Vista / 7)

  Good luck...