Windows 7 64 bit without Audio problem - completely lost and incredibly frustrated.

Similar Questions

• Completely lost and confused about this thing of VM...

  Hello... I'm eager to try this thing any virtual machine so that I can try windows 10. I can't just update windows 10 because I use my laptop for school and there are too many conflicts, glitches, or whatever you want to call them between the programs that I use for school and windows 10. in any case and through my school I have access to the Dreamspark site and downloads (if you are not familiar with what is, I think that its really irrelevant necessarily anyway). Well, I burned the iso image to a disc and I have a folder of virtual disk on my computer so I think that means that I have downloaded the program, but when I open it and try to run it it always says that to restart or insert media that tells it where boot them from. so I try to run the components of integration of the iso image and he tells me the same thing. I am completely lost and totally frustrated and hope that someone can better explain the proper procedure, I should take to do this "thing"!  the operating system running on my laptop at the start is Windows 7 Professional 64-bit. Don't know what other info would be relevant, so if I left out anything important, just ask and I will specify.  Thanks in advanced for any help.

  I'm not familiar with the Microsoft Dreamspark program, but install Windows 10 on a Virtual Machine on a host Windows 7 is pretty simple using VirtualBox, a free application.

  The following link can walk you through it step by step:

  http://www.groovypost.com/HOWTO/Windows-10-install-VirtualBox/

• No output hdmi for hpe 580t Windows 7 64 bit. Audio driver: Realtek 6.0.1.6196; Date: 9/7/2010

  Windows 7 64-bit. Audio driver: Realtek 6.0.1.6196; Date: 9/7/2010

  There is no realtek hdmi output in his choice.

  In its Panel:

  Speakers

  Headset

  Realtek Digital Output

  Pls help

  Hello detroithp, you could try going to this link and see if the information is what you need.

  This seems to be a common problem. The link shows the solution to this problem is for Vista,

  but it should be the same for Windows 7.

• HP dv6-2150us + Windows 7 64 bits + quick launch problem

  I have a new install of WIndows 7 64 bit on my HP dv6-2150us, and now there is a problem with the Quiclaunch buttons. Before my reformatting to get a clean install of windows 7, the quick launch buttons has worked, after the installation of the new, I have a problem. The problem is that pressing the volume buttons or button mute are not any notification on the screen. I can adjust the volume from the keys, but no statement is displayed (I need to check the volume slider in the bar of tasks to see how I increased or decreased it). Mute works also but still no notification.

  I installed all necessary drivers and the problem does not reolved. I wonder if windows 7 is somehow blocking notifications or if it's a problem with the application of buttons?

  Install 3RVX,

• Can I move from 32-bit to 64-bit without doing a full wipe and the re-installation?

  Can I move from 32-bit to 64-bit without doing a full wipe and the re-installation

  original title: 32-bit to 64-bit XP upgrade

  Can I move from 32-bit to 64-bit without doing a full wipe and the re-installation

  Sorry, but no, you can't. A new installation is required.

• Laptop bought with windows vista installed, the hard drive was completely cleaned and windows 7 installed, I have to uninstall it and install a genuine windows xp pro - how do this please.

  Laptop bought with windows vista installed, the hard drive was completely cleaned and windows 7 installed, I have to uninstall it and install a genuine windows xp pro - how do this please.

  On Sunday July 25, 2010 10:11:30 + 0000, pc_novice wrote:

  Hi Gordon

  I just downloaded drivers from the Dell website in support of xp

  I have tried to reboot from the XP cd but got the following message when I tried to install

  "This program is blocked due to compatibility issues"

  Program - the installer of Windows

  Editor - Microsoft

  Location: D:\1386\winnt32.exe

  Setup cannot continue because the version of Windows on your computer is newer than the version on the cd. If you decide to remove the version latest Windows that is currently installed the files and settings cannot be recovered"

  I don't want Windows 7 at all so I'm ready to lose all data, so how can I do to remove it?

  You say that you have started from the XP CD, but something is wrong with that
  you do. Just boot from the CD and follow the prompts for a
  clean install. A new installation by formatting the
  drive and does not care what version of Windows is installed (or
  even if any version of Windows is installed.

  Ken Blake

• How to install windows xp 32 bit on hp dv6-6117tx lodge and application download driver on windows xp

  How to install windows xp 32 bit on hp dv6-6117tx lodge and application download driver on windows xp

  Hello

  Please read the XP downgrade useful guide at the link below

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and/General-XP-downgrade-Guide-for-HP-laptops/TD-p/83267

  The guide details for your series model are in the section called 3. Dwas Modelisation

  Paul

• Dell Inspiron 3520 under Windows 7-32 bit wireless card problem

  Hi all

  I just bought a new Dell Inspiron 3520 (service code: ) that came with Ubuntu.

  Although I had to install windows 7 32 bit and I am facing a problem with wireless adapter driver.

  When I try to connect to the preferred network I get "unidentified - No. Interntet network access.

  I know it's a driver issue because it works fine on Ubuntu.

  So that the original configuration of Dell site lists:

  "WIRELESS: DELL WIRELESS CARD 1703.

  so I downloaded this driver: http://www.dell.com/support/drivers/us/en/19/DriverDetails/Product/inspiron-15-3520?driverId=K21VK&osCode=W732&fileId=3126779147

  without success.

  Is there something I can do?

  Sorry for the long post.

  Thanks in advance

  Hello and thanks for your reply.

  Discovered that the solution was Device Manager-> ECS-Dell Wireless 1703 b/g/n-> properties >-> Advanced-> 802 .11n changed bandwidth of 20 MHz / 40 MHz automatic.

  

• Legal upgrade (and activate) for Win7 64-bit Windows XP 32-bit WITHOUT overwriting current (replacing) Win XP 32-bit install?

  I use version OEM Windows XP HOME 32 bits on a Gateway desktop computer - with no problems.  However, the hard drive is to reach the end of its planned life expectancy, and approaching the period of support for XP.

  To solve the problem, I installed a new (small capacity) hard drive, with the intention to install Win 7 Pro (64 bit) on the new drive.  I read and reread ALL instructions on different help pages (for installation) (http://windows.microsoft.com/en-us/windows7/)... and avoided all of the common problems.

  Currently I have the old (Win XP) and the new hard drive physically assigned to DH0 DH1 - as a CUSTOM, run Setup. -leaving me with a choice of dual-boot to initialize the top between "Earlier version of Windows" (on DH1) and Windows 7 (on DH0).  They both starts without any problem.

  HOWEVER - during inspection, I see that the folder "OLD Windows" on Windows 7 drive in a VACUUM.  This indicates that installation of Windows 7 does not recognize the existence of my current installation of Windows XP on the other hard drive?  Upon activation, I get the dreaded
  "Windows 7 activation error: 0xC004F061.
  because "a previous version of Windows wasn't on your computer when Windows 7 was installed. To install an upgrade version of Windows 7, Windows Vista or Windows XP must be installed on your computer. "

  The new Windows 7 must be installed on the same drive as the old Windows XP  In order to activate the 'upgrade '?

  I have no problem with the drudgery of migrating my data and install applications from one drive to another with an empty directory "OLD Windows" - as long as both car are mounted.  My only question is to know if the 'new' Win 7 64 - bit OS SHOULD replace the old XP 32-bit operating system in order to Activate the newly installed operating system Win 7 64 bit.

  Is there an 'Official' Microsoft document that answers this question?

  Thank you
  John Jr

  Perhaps we should see what we all like to talk...

  To analyze and solve problems for Activation and Validation, we need to see a full copy of the report produced by the MGADiag tool
  (download and save to the desktop - http://go.microsoft.com/fwlink/?linkid=52012 )
  Once saved, run the tool.
  Click on the button continue, which will produce the report.
  To copy the report in your response, click the button copy in the tool (ignore the error at this stage), and then paste (using r-click and paste or Ctrl + V) in your response.
  -* in your own thread *, please

  Please also state the Version and edition of Windows cited on your COA sticker (if you a) in the case of your machine (or inside the battery compartment), but does NOT quote the key on the sticker!
  http://www.Microsoft.com/en-us/howtotell/hardware.aspx

• Windows 7 64 bit VPN client problems

  Hello

  I am running Windows 7 Professional 64 bit and Cisco VPN client 5.0.07.0240. I am able to connect to my corporate network and work ok but connection is very slow!

  Connection time is distributed as follows:

  Client program VPN Opening: 70 seconds.

  Click on connect and wait for the user credentials dialog box: 30 seconds.

  Enter the credentials, and then click ok then 'user authentication': 90 seconds.

  "Negotiate security policies": 60 seconds.

  User area credentials if poster again, re - enter the credentials that the dialog box is empty, and then click ok: 90 seconds.

  "User authentication", then connection established: 120 seconds.

  I have a colleague running 64-bit Windows 7 (ultimate edition) which uses the same version and does not have these problems.

  Any ideas anyone?

  See you soon,.

  Gary

  Gary, thanks for the update. If disabling the firewall and restart vpn service did not help. Could you please try and install the 5.0.07.0290 version?

  Before do you, I would like to know if you import .pcf for the VPN Client files. If so, please try to re-create a file .pcf on the PC and try and use this file to connect. Also, I see that the existing .pcf file you are using is a file read-only. Could you change this and give permissions to write to the file, and try to connect. If th does not help the two steps will then install the 5.0.07.0290 version.

  Thank you

  Delvallée

• Windows 7 64-bit PNP monitor problem, can I remove it?

  I have problems with my dell 1749 windows 7 64 bit. I had to do a fresh install of windows and this PNP monitor is appeared that is causing me problems with resolution and no 3d available. Can I remove the PNP monitor and use PC of Linda. IM on a 17 inch

  Thank you

  PS., still under warranty

  

  

  Install .net 4.0 (if not already done)

  www.Microsoft.com/.../Details.aspx

  Then the driver AMD

  www.Dell.com/.../Studio-1749

• My Windows 8 "your pc fell on problem, collecting information and restart."

  Helloo everybody

  I had a problem with my pc today though:

  yesterday, I unplugged my PC power and changed the place of my PC and everything.

  This morning when I pluged everything I pressed the power button on my PC, it boots up it shows me the logo of the screen and then "your Pc on a problem, collecting information and restart for you" I have installed 2 a 8 and the other 8.1 windows, none of them is ready to start

  but before that I unplugged my PC, it worked very well.

  I tried to do the automatic repair and it says 'auto repair Failled' I also tried to "restore my system" and still the same problem

  I downloaded these girls to dump, please check the

  I'm really grateful if someone can help me

  idon't want to lose those 2 windows, and I don't want to format :(

  Thank you!

  dump girls:

  https://SkyDrive.live.com/redir?RESID=54C1809ED8225CC1%21501

  Salim98

  The crash more recent was November 29 and was tied to a stake of fatal power which might have killed the HD

  have you tried booting in safe mode?  Tried to start the victory 8 dvd?

  INTERNAL_POWER_ERROR (a0)
  Power policy manager has encountered an unrecoverable error.
  Arguments:
  Arg1: 000000000000010, the disk subsystem has no properly read or write the part of hibernation
  file.
  Arg2: 000000000000000a
  Arg3: fffffa8005a39340, POP_HIBER_CONTEXT
  Arg4: ffffffffc0000185, NTSTATUS error code

• Windows Media Player 11 - without audio

  Hi all

  I'm running WMP 11 on Vista Basic (32 bit) and I have the video but not the audio. If I run the DVD on the same laptop computer using Acer Arcade Deluxe, I have no problem.

  What can I do about it?

  Thank you.

  Hi Kitkat,

  • You have a third-party codec pack installed on your computer?
  • What is the format of the video file?
  • It happens with all the video files?

  Step 1

  If you have any third-party codecs pack installed, you can try to remove all the third-party codec pack on your computer and reinstall the same to check if it works very well.

  Follow the steps below to remove the Codec pack:

  a. Click Start.

  b. click Control Panel.

  c. click on programs and features.

  d. check for any codec pack installed on the computer (for example K-Lite Codec Pack).

  e. uninstall the Codec pack.

  f. restart the computer and verify if you are able to play movies.

  g. try to re - download the Codec pack and install it.

  Also, let us know if you are able to hear the audio during playback of videos using Windows Media player on your computer

  Step 2

  You can also try to disable all improvements and check if you can hear audio during playback of the video.

  Improvements to todisable:

  a. access control panel from

  b. nattering

  c. Select the playback tab

  d. Enter select speakers/headphones

  e. click Properties

  f. Select enhancements tab

  g. disable all improvements

  I hope this helps. Let us know the results.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 7 64 bit without recognizing an SD card or SDHC card through the bult in the card reader.

  12/15/10 my computer Desk Top read SDHC and SD cards without problems through the media built in card reader, but the small import window to the lower right of the screen wouldn't do anything, I have to disconnect & reconnect to get rid of it.
  Then, on 18/12/10 if I inserted the card SD or SDHC card & NOTHING happen on the monitor. It was as if nothing was plugged. It would appear click on the Start button > computer as a removable storage but it wouldn't ask to import the photos. No window pop up or anything.
  If I have a SD or SDHC insert card in a USB adapter so that connected on a USB Port, it works fine. I tried with four different memory cards.
  Why the computer OS does not recognize that the inserted card & even the computer itself would know that it was inserted because there is a small light that flashes when something is plugged. But he doesn't want to import and MARK photos directly from the construction in the card reader?
  I was on the phone with gateway 3 times by train to update ALL the drivers & try the system restore on the eve of thatI know it actually worked.
  I even spent an hour and 45 minutes on the phone with a Tech. Microsft via the remote control and still could not solve the problem. Everyone wants to blame others, but I see a lot of people have very similar problems.
  My computer was purchased there are 4 1/2 months. It's a gateway FX6840-03e. It is a very powerful platform but suddenly something happened and now it will not import pictures from the card reader. I have to import via USB!
  The strange thing is that my sister told me that exactly the same thing happened to his computer about a week and half ago. It is configured to download & install updates automatically. I'm set up just to be notified to download and install myself.
  Why backup restore & would still work on a date that we both knew for positive that our computers were working very well?
  So we need help! Anyone have any solutions or suggestions? The only assistance we have received so far was "Re-install the entire operating system."

  Well Finally I found the problem of not being able to import images. After so much work and all try, same re-install windows7 operating system
  It turns out this is one brass bit inside the construction tabs in the card reader was not working properly! Just a. That's all it took. It would show that the card has been installed, the light on the computer itself would show a card has been installed, but he wouldn't ask to import.
  THANK YOU ALL for your help and suggestions! It was great.
  The computer is fairly new but it had a flaw inside the card reader. So, if anyone knows the same check the connection problem.
  Once again thatnk you for your help!

• Windows Live Movie Maker High Audio problem

  It seems that when I put my files on Windows Live Movie Maker Flip camera, audio quality is looking to make her high top. That the audio is done, and the fact only Windows Live Movie Maker.

  I edited the video files on a mac without problem, and I can watch my videos on Windows Media player without problem.

  Hi Brandon,.

  Please go to the Microsoft Community Forums.
  This problem would be better suited in the Windows live forum.
  Please visit the link below to find a community that will support what ask you
  http://answers.Microsoft.com/en-us/windowslive/Forum/MovieMaker?tab=all
  I hope this helps. If you have any other queries/issues related to Windows, write us and we will be happy to help you further.