Windows 7 and Toshiba Tablet issues and Smart Board

Similar Questions

• Windows 7 and Smart view

  Hello
  
  SmartView is compatible with windows 7. We have Hyperion 11.1.1.3. I searched through the forums and found a link where it says that smartview is not supported in Windows 7.
  
  Re: Info of SmartView
  
  Is it a different version of smartview that works with windows 7 or do I have to install a patch? Please advice.
  
  Kind regards
  Brig.

  You should be fine with Windows 7.

  The thread you referenced is for HFM 4 and 7 of SmartView (there was a SmartView 7? Who would have thought?).

  If you have any questions regarding compaitibility, Oracle product this nifty set of Excel workbooks with everything you always wanted to know about certified platforms:
  http://www.Oracle.com/technetwork/middleware/bi-Foundation/Hyperion-supported-platforms-085957.html

  Kind regards

  Cameron Lackpour

• Want a Smart Touch 23-065: I've upgraded to Windows 10 and now my bluetooth devices do not work

  I have a Smart Touch 23-065 envy that I have upgraded to Windows 10 and now my bluetooth devices do not work. They are detected, but not pair

  OK, line background peripheral bluetooth is not supported until the vendor provides a Windows 10 driver which is not yet and my never be available. Suppose if I want to use bluetooth, I'll have to get a usb adapter

• I try to install the McGraw Hill software and get an access denied error message. I have contacted the software company, they tell me it's a compatibility issue with Windows Vista and to contact Microsoft.

  I try to install the McGraw Hill software and get an access denied error message.  I have contacted the software company, they tell me it's a compatibility issue with Windows Vista and to contact Microsoft.

  Right-click on the setup.exe > run as admin.

  See you soon. Mick Murphy - Microsoft partner

• Upgrade to Windows 7 and would like to know if all my tablet/pen functions still work?

  Original title: Windows7 and Tablet PC

  I have a Gateway Tablet PC.  He who is like a laptop, not these new without a keyboard.  For some reason, she has two model numbers: TA1.0 and M280E.  At the moment it has Windows XP (gateway) Tablet PC edition 2005 Version 2002 Service Pack 3 on it.  It has a processor Intel Pentium M 1.73GHz, 1,999 GB of RAM or processor if you look in the BIOS, 2048 MB of RAM.  I think it's the RAM Max will take this particular PC.  The processor is scalable?  I know that I have contributed to a maximum of one of my doors from the other monitor has collapsed on me one day and is unusable, so I think this is one.  The ugly manual, I downloaded did not about the Max RAM, a Fujitsu 37.2 GB HD and a CD - RW Optiarc.

  Because Windows XP is longer supported, no. updates (although I find it odd that a pop-up saying updates are ready for your computer is fun) and for some reason it will run is more than some previous programs I ran over it, such as MSE and Windows Media Player 11, and I don't know I'll find others.

  The important question is: I want to upgrade to Windows 7 and would like to know if all my tablet/pen functions still work, since it's the main reason I want to use?  And of course running WinXP is a safety hazard as well.

  I use my ASUS X54C now and you want to reset to factory settings and reformat the HD, so I want a computer to use while I'm this, as well as using his pen to create a clip art image and also many other things.  Is there anything else I should know?

  The first thing to do is to check the support web site of the gateway to see if there are drivers for devices on Windows 7 for your model. If there is no record of specific device in Windows 7 listed then you will not be able to run Windows 7 correctly, or it may not work at all.

  Gateway driver support web site: http://us.gateway.com/gw/en/US/content/drivers-downloads

  Note: There is an "Auto Detect" option that can help you determine the right model you have.

  M280 using as a guide I tried to see what is available and found only XP / Vista and Windows 2000 drivers, so you may be out of luck, but try to auto detect and see if you have Windows 7 drivers listed.

  J W Stuart: http://www.pagestart.com

• Help a update my computer resembling windows 95 and document issues! :(

  Hi I have not used my computer in about two weeks. I just turned on my computer and configured an update, rebooted and then proceeds to set up. He went to my screen which showed a background image of hello kitty that I placed there connection. But once you ID and waiting for my computer fully load the bottom black screen that must be an image, my startup toolbar looks like windows 95, all my documents does not appear when you click documents early upward (images, word, etc.), when you click on the download folder it gives me an error saying that I need a program , it shows that all my documents (images words, downloads, etc.) when I click on the name of my computer in the start menu up, which is strange, my computer mouse can be an animated hello kitty but now its back to normal, I lost all my favorites and I must now re-implementation to date of what was updated. Anyone have any ideas on how to help me with this? Or is it a new update of all HP computers have? I have a Windows 7 Home Premium HP.

  Thank you!

  P.S. When I say my computer it looks like Windows 95, I mean, fonts, and everything changed. The only thing that miss me is the challenge of chips and chimera, then it wouldn't be so bad lol.

  Hi I have not used my computer in about two weeks. I just turned on my computer and configured an update, rebooted and then proceeds to set up. He went to my screen which showed a background image of hello kitty that I placed there connection. But once you ID and waiting for my computer fully load the bottom black screen that must be an image, my startup toolbar looks like windows 95, all my documents does not appear when you click documents early upward (images, word, etc.), when you click on the download folder it gives me an error saying that I need a program , it shows that all my documents (images words, downloads, etc.) when I click on the name of my computer in the start menu up, which is strange, my computer mouse can be an animated hello kitty but now its back to normal, I lost all my favorites and I must now re-implementation to date of what was updated. Anyone have any ideas on how to help me with this? Or is it a new update of all HP computers have? I have a Windows 7 Home Premium HP.

  Thank you!

  P.S. When I say my computer it looks like Windows 95, I mean, fonts, and everything changed. The only thing that miss me is the challenge of chips and chimera, then it wouldn't be so bad lol.

  Hello

  Are you sure it is an update of Windows and not an update of HP?

  If an HP update, you will need to contact them.

  _____________________________________________________

  Do a Safe Mode if necessary system restore to prior problems.

  "In Windows 7 system restore:

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  'Advanced options boot (including safe mode).

  http://Windows.Microsoft.com/en-us/Windows/Advanced-startup-options-including-safe-mode#1TC=Windows-7

  "The Advanced Boot Options screen lets you start Windows in advanced troubleshooting mode. You can access the menu by turning on your computer and pressing the F8 key before starting Windows (press F8 at the rate of about once per second)"

  _____________________________________________________

  If graphics problems persist after that:

  Go to the website of your computer manufacturer > drivers download Section > then key in your computer model number > find your operating system > find two graphics / video or from the Chipset drivers and download and install.

  ______________________________________________________

  Microsoft gives sometimes you updates for the 3rd party hardware: graphics, network cards, etc.

  You should only get the latest drivers for them to real hardware manufacturer's website, as Microsoft normally does nor those have the most recent drivers available as Microsoft relies of the 3rd party hardware Manufactuer to provide.

  But unfortunately, the only way to know which is the update of the problem is to install them one by one, until you find the 'wrong' for your installation.

  You can do a system restore to get back until it has been installed (which is NOT the best way to remove an update) or follow this method:

  'Remove an update'

  http://Windows.Microsoft.com/en-us/Windows-Vista/remove-an-update

  'Remove an update - Windows 7'

  http://Windows.Microsoft.com/en-us/Windows/remove-update#1TC=Windows-7

  When you have found the issue of update of the list of updates which is presented > then right click on the update problem > select Hide update > and it will not be available to you once again

  "How to hide or show an update of Windows Vista"

  http://www.Vistax64.com/tutorials/72491-Windows-Update.html

  "How to hide or restore the updates of Windows hidden in Windows 7 and Windows 8"

  http://www.SevenForums.com/tutorials/24376-Windows-Update-hide-restore-hidden-updates.html

  _____________________________________________

  Here's how to chanage update settings, if you think it is necessary to:

  "Understanding Windows Update and Extras in Windows Vista and Windows 7.

  http://www.bleepingcomputer.com/tutorials/Windows-Vista-updates-and-extras/

  Or the other of these two update settings will give you the chance to see what you want to install through Windows updates;

  Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

  But remember you normally only have problems with hardware 3rd party drivers. Other updates are to improve the Performance and security of your system

  See you soon.

• Anyone know of any compatibility issues with Windows 8 and RV series routers?

  I have a small network with a laptop computer, Windows 8, Windows XP desktop computer and a network MyBookLiveDuo storage device. I have sharing enabled between these devices. Everything worked well on a network switch. I replaced the switch with the RV110W VPN Firewall Router to add better security to my network before I have expand it. Since then, I have a laptop Windows 8 intermittent connectivity while the connectivity of the XP desktop computer shows no problem.

  On the laptop Windows 8 I ran network troubleshooting, and he complained that two devices on the network are (NAT) network address translation and the symptoms he describes is what I see. Problem is that I don't have a network Analyzer to look at the network in more depth. I looked online for the RV110W documentation and if NAT is listed as one of the characteristics, there is no discussion in the documentation on how to manage this feature in the router.

  I can connect to the Windows 8 laptop from Office XP and access shared content. I can connect to the Duo since Office XP without difficulty. However, except when they reappear periodically under the heading of my network in Explorer on the laptop Windows 8, I can't access the Office XP or the Duo of the laptop Windows 8. Curiously, however, I have a part of the Duo mapped as a network drive on the laptop Windows 8 and I can access it even when everything else has gone. Also, the interface of management for the Duo appears on the laptop Windows 8 and I can access the Duo to manage. Only, I can't access the shares on the Duo. Then all of a sudden they reappear under network in the file Explorer and I can then access. I think it must have to do with NAT, but I can't find anything out about it.

  If it's something I can turn on the router long enough to see if the problem goes away I would like to try, but I can't find it in the documentation, and I can't find it when I look aroiund in the management interface.

  The fact that I am not having the form of the XP desktop computer problem makes me think that a compatibility issue with Windows 8. Does anyone know if Windows 8 did anything with NAT? I try to get help from Microsoft Technical Support, but their level 1 tech told me to call Tech Support Pro when they open later this morning. Support cat Cisco won't open until Monday at 09:00.

  Also, throughout this connection problem Internet from the laptop through the router is never interrupted. It's strictly connectivity with other devices on the internal network that comes and goes.

  Hi Gregg,

  NAT must not play unless your applications on the internet. The "port Internet" or "WAN port" is a NAT port that converts your public IP address from ISP to your LAN subnet addresses. NAT allows multiple computers on a network to use 1 public IP address.

  If your devices are connected to the Ether "LAN ports" they are not affected by NAT unless they are Web applications. 4 'LAN ports"are 2 layer switch ports. This means that all local requests are forwarded by the switch ports.

  This device did replace exactly? The XP computers, DUET and window 8, make these products using the static IP address or you allow the RV110 to assign an IP address automatically? What IP address you are using on the LAN of the RV110?

  -Tom
  Please mark replied messages useful

• I have a Toshiba Satellite P845-Canada-S4310 with Windows 8. I want to delete Windows 8 and install Windows 7 Professional.

  I have a Toshiba Satellite P845-Canada-S4310 with Windows 8.  I want to delete Windows 8 and install Windows 7 Professional.  So I can run programs of

  XP and Vista and use msn.com instead of msn.com for windows 8.

  Then you need a commercial version of win7, or any other win versions that you want to run, assuming that Tosh provides drivers for these win versions

• Webcam CNF7051 toshiba laptop; I installed windows 7 and webcam has never worked since.

  I installed windows 7 and webcam has never worked since. What is the solution for this problem?

  Hello

  Since you upgraded to Windows 7 have you run Upgrade Advisor and verify with the
  Compatibility Center (for the compatibility of the device)?

  Windows 7 Upgrade Advisor <-- please="" run="" this=""> http://www.microsoft.com/windows/windows-7/get/upgrade-advisor.aspx

  Also check the Compatibility Center (for the compatibility of the device)?
  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Check with the system and peripheral manufacturers for updated drivers and many have special
  instructions to help the upgrade to Windows 7. You should also check with the system
  Machine to ask in their forums (if any) for known problems and solutions and support.

  Toshiba - Forums
  http://laptopforums.Toshiba.com/

  Toshiba - Contacts
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  Toshiba - drivers - access your model
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba - Support
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  ==============================================================

  If the system is compatible Windows 7 AND there are drivers for your WebCam
  (and other devices).
  
  Vista references apply to Windows 7.

  You probably need to reload the drivers of the device and the camera'IF' control software
  There is for Windows 7.

  Login as an administrator.

  Control Panel - Device Manager - Imaging - write down of the brand and the model of camera - double
  Click on it and on the tab of the driver is version. Now, click on update drivers (who cannot do anything
  that MS is far behind the drivers of certification). The RIGHT CLICK on the camera - UNINSTALL-
  REBOOT - it will refresh the driver stack.

  Now, go to the system manufacturer's website and download the latest driver of the camera and other partners
  the camera software (if not more recent get the same).

  Download - SAVE - go to them and RIGHT CLICK - RUN AS ADMIN - reboot after each driver.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers to 7 (updated drivers manually using the methods above is)
  to ensure that the latest drivers from the manufacturer of system and device manufacturers are are preferably)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  ==============================================================

  If there are no Windows 7 drivers:
  
  You can try loading the latest driver available in Compatibility Mode which sometimes
  work however, it isn't anywhere near a sure thing.

  Exhausted all other methods in the Troubleshoot utility above before trying these.

  Logon as ADMINISTRATOR for all of them.

  You can try Compatibility Mode but this rarely works on the device drivers.

  Right click on the driver executable (.exe) file - select Compatibility Mode

  In the drop-down menu choose XP or Vista and Service Pack (if it is the version
  "you try the drivers).

  Click OK, and then let the race to see if it will install.

  =================================================

  It also rarely works on the device drivers but it is worth trying:

  Another method to try is to run the .exe (if self extraction) or Unzip (if it is compressed) to a folder:

  How to open a high in Windows 7 command prompt
  http://www.SevenForums.com/tutorials/783-elevated-command-prompt.html

  Open an elevated command prompt : (probably looks like this)

  C:\Windows\System32 >

  CD \the path to this folder as C:\User\Your user Name\Camera_Folder or something else
  the path is the folder where the driver is unpacked.

  So in this case it would be \User\Your User Name\Camera_Folder CD and the prompt
  look like:

  CD \User\Your user Name\Camera_Folder >

  This in type at the prompt and press ENTER.

  -I - one *.inf PnPUtil

  It will take a little time to respond.

  If it does not (error) use the full path to the driver, for example (which can be used
  any guest):

  PnPUtil-i - one C:\User\Your user Name\Camera_Folder\*.inf

  Still wait to see if it will install.

  How to open a high in Windows 7 command prompt
  http://www.SevenForums.com/tutorials/783-elevated-command-prompt.html

  The PnPUtil command syntax
  http://msdn.Microsoft.com/en-us/library/ff550423 (vs.85) .aspx

  PnPUtil.exe - operating instructions
  https://www.faultwire.com/file_detail/PnPUtil.exe * 28200.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Windows 8 and IE 10 Smart advertising cards frequently PIN

  I have a new installation of Windows 8 and 10 of the EI. When I try to access my Outlook Web Access using my smart card I constantly wonder my PIN code. I can't find a setting allowing me to cache the PIN code for any amount of time. Very distracting sound at the point of being almost unusable.

  Hello

  Welcome to the Microsoft community.

  According to the description, seems that you are unable to access Outlook Web Access by using your smart card that it asks for the Pin code.

  The question that you are running the best to the following Forum:

  http://social.technet.Microsoft.com/forums/en-us/w8itprosecurity/threads

  Please report if you're still having problems. We will be happy to help you further.

• re Windows 8 and Aol 9.7 compatibility issue

  Preiously, I installed and used AOL on this new ASUS desktop computer (do not remember what version and have now uninstalled) with Windows 8, but has recently gotten error box: aolsoftware.exe - bad image.  Text says: C:\Windows\SYSTEM32\samdi.dll is not designed to run on windows or it contains an error.  Try to reinstall...   0xc0000020 error code.

  I uninstalled the previous version and downloaded AOL 9.7 as it is supposed to be compatible with Windows 8.  Have downloaded OK but at the start of the installation I got above message again.  Then he started to install, but VERY slowly (about 30 minutes).  Finally stopped at 99% and a box came up saying there is a compatibility issue and I should try to get help online.  Microsoft could not fix the problem, and I found myself on this forum.  Is there a better version of AOL on Windows 8, and if yes what is it?  Any notice received with gratitude.

  First do a clean boot:

  http://support.Microsoft.com/kb/929135

  Remove all AOL files to C:\Program Files or C:\Program Files (x 86)

  Temporarily disable your Antivirus

  Restart your computer, right-click on the AOL Setup file and click "Run as Administrator"

• Issues of compatibility windows 7 and acrobat 6.0

  issues of compatibility windows 7 and acrobat 6.0

  You have a question? AA6 is not fully compatible with Win7, probably not at all to a 64-bit system. The recommendation is to buy AAXI. If you manage to install AA6 on Win7, you can optionally change the port of the Adobe PDF printer to FILE and then print to file. It is a PS file and will then be run through Distiller to obtain a PDF file. This may or may not work for you. I've experimented with AA5 and managed in this way for a Win7 32-bit system. Not a great solution, but it may meet your need.

• Compatibility issues with windows 7 and maplestory

  I have windows 7 32 bit, I downloaded maplestory and when I clicked it, he jumped to the top with a box that says it has compatibility problems.  I tried to go to the properties of switching it forms XP SP3 and windows vista and rebooted but none of this seems to work.  I also went to troubleshoot compatibility and put it in my specefic problems, but it comes back with an error in Japanese.

  Help?

  Hello

  MapleStory has no information on the Windows 7 Compatibility Web site. The origin of the game specifications are for Windows 98 - XP.
  It is possible that they did not have it compatible with Windows 7 yet.

  You can check with the support of Maplestory for all hotfixes that may be needed to play the game on Windows 7.

  http://MapleStory.NEXON.NET/support/downloads.aspx

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Internet Explorer 9 problems with Vista and Windows 7, are there known issues that are causing to freeze or crash completely computers?

  I was warned of updates via Windows Update Internet Explorer is available (important update) for my desktop running on Windows Vista and my laptop running on Windows 7.

  I had to go back to Internet Explorer 8 on Vista because it keeps freezing. Is that what someone else has experienced this problem because I'm not going back on until I know it is safe to do so. Can someone advise me on this please?

  Window 7 is on my computer, but my laptop but since Internet Expplorer 9 installing my computer has an accident and I received a message saying that windows had closed my computer to save my files etc. also since the installation, I get a black screen, does not last a long time but its worrying because that's what happened before the crash. Can someone advise me on this please?

  I am a real novice, not to speak of mind at all and I was wondering also if someone else knows the problems that I am and if you is microsoft aware of these problems and try to solve a problem for them. I think they have out there soon.

  Are you worried? Yes. any aid granted by a person would be much apreciated. Thank you

  I was warned of updates via Windows Update Internet Explorer is available (important update) for my desktop running on Windows Vista and my laptop running on Windows 7.

  I had to go back to Internet Explorer 8 on Vista because it keeps freezing. Is that what someone else has experienced this problem because I'm not going back on until I know it is safe to do so. Can someone advise me on this please?

  Window 7 is on my computer, but my laptop but since Internet Expplorer 9 installing my computer has an accident and I received a message saying that windows had closed my computer to save my files etc. also since the installation, I get a black screen, does not last a long time but its worrying because that's what happened before the crash. Can someone advise me on this please?

  I am a real novice, not to speak of mind at all and I was wondering also if someone else knows the problems that I am and if you is microsoft aware of these problems and try to solve a problem for them. I think they have out there soon.

  Are you worried? Yes. any aid granted by a person would be much apreciated. Thank you

  I am I have the same situation, because I installed Internet explorer 9. The only thing that differs with us is that I kept IE9, and I'm dealing with it full of hope that MS will return with a patch soon!

• Windows Vista and especially performance issue with M/B AsRock P4i45GV R5.0

  4 years ago, I bought AsRock P4i45GV-M/B 5.0 R, with Intel Pentium 4 processor with 2.40 GHz, 1 MB of L2 Cache.

  I have installed Windows Vista, since Intel 82845 G onbaord graphics does not support Windows Vista, I havd to installed an add - in AGP card. I installed NVIDIA GeForce FX 5500 and I also tried NVIDIA GeForce FX 5200, but my system does not at all. It's really slow.

  Is this due to add - on card AGP?

  I installed 2 GB of RAM, which is the maximum amount of RAM my M/B can support.

  I also tried with Windows 7, but it works worse than Windows Vista on my PC.

  Please, help me to boost the performance of my system. I don't want to go back to Windows XP.

  The problem may be because my M/B does not support Windows Vista and higher?

  Rannvijay Kapoor

  The processor and the graphcis card are old and not the fastest.

  Buy a new basic system of AMD (Athlon II X 2/X 3, at least 2 GB of DDR3 RAM, a mainbaord with AMD 880 G chipset (integrated graphics card), you can use the old HARD disc), it is not too expensive, but gives you a boost huge performance.
  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/