Windows Vista and especially performance issue with M/B AsRock P4i45GV R5.0

Similar Questions

• Im trying to upgrade to sp2 for windows vista and it keeps fail with the error code 80070017

  Im trying to upgrade to sp2 for windows vista and it keeps fail with the error code 80070017

  error 0 x 80070017 data ERROR_CRC des 2147024873 (cyclic redundancy check).

  The files may be damaged or missing. Make sure all files required for installation are available, and restart the installation.

  Clean the system (compensation to all Temp/Tmp folders and included the content delete all offline, the TIF browser, Cookies, compensation do a disk cleanup.)

  Click the Start button. In the search box, type Disk Cleanup, and then in the list of results, click Disk Cleanup.

  Maybe some interviews, try to run the "chkdsk/r" command at the command prompt

  Check disk or Chkdsk is disk error checking in VISTA. It can be used to verify orruption and optionally repair errors and bad sectors on the hard disk.

  How to run Checkdisk at startup CHKDSK

  http://www.Vistax64.com/tricks-n-tips/67612-checkdisk.html?LTR=C>

  Run SFC/scannow

  File system (CFS) auditor checks all files in Vista are where they should be, and that they are not corrupt.

  WHY: You want to ensure that the base operating system files have not been damaged or changed.

  How to fix and check the integrity of system files of Vista with the System File Checker: SFC/scannow

  http://www.Vistax64.com/tutorials/66978-system-files.html>

  04/01 / 1107:15: 20:00

• I reinstalled Windows Vista and can not reactivate with my key now... What do I do?

  Hello. I own a copy of Windows Vista Ultimate x 64.  It's the Builder pack and I used this license for 2 other computers I built bringing the total number of machines to 3 that it runs currently on.

  My question is this... I did a clean install on my PC twice since the original version, and now I can't reactivate Windows, what should I do?

  I don't have anything in the original documentation that came with the program which provides a limit to how many times this key could be used to register Windows.

  Any help with this is greatly appreciated... Windows expires today if I can't find a way to activate it :(

  If it's a plain OEM version is good for 1 activation, there is "Generator of Packs" as similar to Amazon I post that are good for 3 activations: http://www.amazon.com/Microsoft-Windows-Ultimate-32-bit-Builders/dp/B000LP5EMS

  How to activate Windows 7 or Vista manually (activate by phone)
  http://support.Microsoft.com/kb/950929/en-us

  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) explain your problem clearly to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  Activation and registration of a Microsoft product
  http://support.Microsoft.com/?kbid=326851
  Windows activation: (888) 571-2048
  (888) 725-1047 or 800-936-5700

  ----------------------------  Alternatives -------------------------------------

  To enable the use of the phone

  1. open Activation of Windows by clicking on the Start button, right click on computer, clicking Properties.
  then by clicking on activate Windows now. ?

  2. click on show me other ways to activate.

  3 type your Windows 7 product key, and then click Next.

  4. click on use the automated telephone and then click Next.
  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  5. click on the location nearest you from the drop-down list, and then click Next.

  6. call one of the available phone numbers listed. An automated system will guide you through the activation process.

  7. When prompted, enter the installation ID that is listed on your screen in your phone keypad.

  8 Note the confirmation ID the phone system gives you.

  9. under the terms of step 3, type the confirmation ID in the space provided, click Next, and then follow the instructions.

  10. If the activation is not successful, stay on the line to be transferred to a product activation agent who can help you.

  How to contact a Microsoft Product Activation Center by phone
  http://support.Microsoft.com/kb/950929

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  J W Stuart: http://www.pagestart.com

• Facing problems with Windows Update and other performance issues.

  Hi, I have a Windows 7 (64 bit) for HP Pavilion dv6 laptop. Since January 5, 2014, my computer had problems. Windows Update stopped working. Whenever I try to run it, it says that the service is not running. When I try to set the agenda by running Microsoft Fix it, an error occurs. It says "Troubleshooting cannot continue because an error has occurred" and when I try to repair Microsoft Fix it with "DIAG_MATS_NETWORK_global", it does not detect any problems. The first time I met the problem was when I tried to play Minecraft; It wouldn't connect and when I tried to relog I get a "SocketException: unrecognized Windows Socket Error: 86 create." Microsoft Security Essentials has update problems as well and my Hamachi can not connect. Skype and all my other programs and video games, such as League of Legends and Maplestory all will work perfectly well. I've looked everywhere in the Microsoft Web site and cannot find a solution. Please help me solve this problem!

  Thanks, but I fixed it! I used the Microsoft Safety Scanner, and it fixed the problem. :)

• Flickr API and cflickr - performance issue with my code.

  I use cflickr to access the api of Flickr and view photos in a lightbox. My code is functional, but incredibly slow. I guess I go about it in an improper way and hoping that someone can point out a better way to do what I'm trying to accomplish. My speed problems develop when I try to extract the descriptions of images within a loop that is show the pictures on the page.

  Here is an example of the code that I use:

  using the following to enter photos:

  < cfset photos = cflickr.photosets_getPhotos (photoset_id = 72157624340881708, auth_token = token) / >

  I then use the following for loop through the array of photos and and also to retrieve the description for each image.

  < div style = "width: 423px; margin: auto; "id = 'Gallery' >
  < = cfloop '1' to = "#arraylen (photos.photoset.photo) ' # ' index 'i' = >"
  < cfset = photos.photoset.photo [i] p / >
  < cfset img_desc = cflickr.photos_getInfo (photo_id = p.id).photo.description / >
  < cfset img_desc = replace (img_desc, 'TRAVEL', ' < br / > TRIP ') / >
  < cfset title photos.photoset.photo [i] .title = / >
  < cfset title = title & "< br / >" & img_desc / >
  < cfoutput >
  < a href = "#cflickr.getPhotoUrl(p, '')" # "title =" #title #"> < img src =" #cflickr.getPhotoUrl(p, 's') # "/ > < / has >.
  < / cfoutput >
  < / cfloop >
  < / div >

  The problem with the code is when it applied for the img_desc inside the loop to the api of Flickr. Each instance of this call takes an average of 300 to 400 MS and the table has more than 300 points, so it times out. I would retrieve all image descriptions at once before the loop and if so, how much better would connect these with the image data that they belong with? It seems that I go about it rather inefficiently.

  I was hoping that I could call a function that pulls all the data I need in a single call, but so far, I've been unable to conclude that.

  (Grrr... this forum trashes e-mail better than any application I have ever seen.)  Here's what my previous answer said in fact...)

  I can't say that I used it. But the use of cfc seems to follow very closely the API . So, I took a glance on flickr forums, and someone suggests that you can retrieve descriptions too by adding the parameter 'extras '.

  http://www.Flickr.com/groups/API/discuss/72157594456853637/#comment72157623785775034

  So try using:
     
  auth_token = token, options = "description") >

• I try to install the McGraw Hill software and get an access denied error message. I have contacted the software company, they tell me it's a compatibility issue with Windows Vista and to contact Microsoft.

  I try to install the McGraw Hill software and get an access denied error message.  I have contacted the software company, they tell me it's a compatibility issue with Windows Vista and to contact Microsoft.

  Right-click on the setup.exe > run as admin.

  See you soon. Mick Murphy - Microsoft partner

• I have windows vista and when I click on a shortcut on the desktop I have a pop up asking what file to open it with. In order to open the file I find the actuall file.

  Original title: registry exe problem

  I have windows vista and when I click on a shortcut on the desktop I have a pop up asking what file to open it with. In order to open the file I find the actuall file. This also occurs when you download the software, which makes it difficult, because the file is not on the pc yet. All solutions?

  Looks like you may have a virus or other malware. Get your updated antivirus program and boot into Safe Mode. Note that some viruses can hide from your normal antivirus program, so you really need to scan in Safe Mode. To enter in Safe Mode when you turn on first, press F8 on every seconds until you get the menu, and then select Safe Mode. Then run a complete system scan.

  Microsoft has suggestions and offerings to

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus

  Moderator Forum Keith has a few suggestions along this line to

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3

  If that suits him fine. If this is not the case, use system restore to go back to an earlier date at the beginning of the problem. To run system restore, click Start-> programs-> Accessories-> System Tools-> system restore. Click on the box that says show more restore points.

  You can check the corrupted system files. Open an administrator command prompt and run SFC if the above does not help. Click START, and then type sfc in the search box, right-click to SFC. EXE and click run as administrator. Then, from the command prompt type sfc/scannow.

  Finally if all else fails, you can look at the rather cryptic system event log. To make, click Start-> Control Panel-> administration-> event viewer tools. Once in Event Viewer system log-click and scroll entries looking for these "error" with indicator see if you can find guidance on where the problem may be.

  I hope this helps. Good luck.

• Microsoft Outlook is compatible with Windows Vista and Windows 7?

  Is there a way by which Outlook can be installed on a computer, Windows Vista and Windows 7.

  We have replacements for Outlook. If so, how to get one?

  Farhad

  «Farhad...» "wrote in message News: 05c1a45d-b7ab-4b99-8a06-b131bb67989b...

  I wanted to know about Outlook Express. I heard that its not available with newer versions of Windows. Is Windows Live Mail used, what is the replacement for Outlook express in Windows Vista and Windows 7. Farhad

  Outlook Express has been replaced by Windows Mail in Vista - and completely removed in Windows 7.
  Windows Live Mail is now supported by MS free mail client and can import messages and contacts in the OE stores.
   
  Note that the upgrade to Windows 7, XP requires a format of the HD - back up your data in the first place, if do a upgrade.
  
  --

  Noel Paton | Nil Carborundum Illegitemi | CrashFixPC | The lazy three fingers

• I am running windows vista and am warned there is a problem with windows media center, restart my computer and try again. It did not work. Help

  I am running windows vista and am warned there is a problem with windows media center, restart my computer and try again. It did not work. Help

  Run the Setup again.

  Open WMC > tasks > settings > General > installation Windows Media Center > rerun the installation

  Does that help?

  If the above does not help then try to reset WMC: -.

  Open Control Panel > uninstall a program > turn Windows features on or off > scroll multimedia features > uncheck the box against Windows Media Center > follow the instructions on the screen > Reboot > open again to turn Windows features on or off in the control panel > scroll multimedia features > check the box against Windows Media Center.

  Now reconfigure WMC again

• I formatted my PC with windows vista and reinstalled but now it shows the wrong key. I use my purchased copy of the software in 2009

  original title: ACTIVATION of VISTA
  I formatted my PC with windows vista and reinstalled but now it shows the wrong key. I use my purchased copy of the software in 2009.

  You simply have to use telephone Activation...

  activation by telephone (call of the operator)
  Click the Start button
  in the search box, type
  SLUI 4
  and press the Enter key
  Follow the instructions - but when asked which service you need the ansafone phone, don't answer - it should oblige the operator to answer, who can deal with you

• Help me to solve the problem with modem hspa usb on Windows Vista and Windows 7

  Hi, I have a problem with my USB HSPA modem when I tried to install in my Windows Vista 64 - bit PC. Sometimes it's OK, but sometimes it has encountered an error trying to install it. After the installation of the almost complete progress, reports of windows as "Unknown material" or "driver is not found. Maybe after a few tries, I was able to install the modem. But later, its happened again. I take the modem at the other PC with XP, it is still OK, but it happened again with Windows 7 Ultimate 32-bit home version. so could you help me to fix it? is it a bug of Windows Vista and windows 7? Thank you very much

  Hello

  go to the website of modem manufacturers and look for the last vista and/or firmware for windows 7

• My computer is windows vista and internet explorer 8 I have trouble on all websites with freezes and hang-ups.

  My computer has windows vista and IE 8 I'm have trouble on all websites freezes and hang ups this isall time!.

  original title: hangupand freezes!

  You scam for Malware as recommended?

  If the above does not fix your repost please problem in the internet forums explore the link below

  http://answers.Microsoft.com/en-us/IE

• Windows Vista does not start upward, with success since the closure complete

  Hello world

  I actually had this problem for a long time, but I'm just now to a point where I'm ready to take a lead in fixing it.

  I can't identify when it started, but Windows Vista does not start upward, with success of a full stop. He gets to the screen where, in general, the green bars will travel across the screen, but the green bars will not come. The screen looks dim and sits there, with the text of the copyright of Microsoft Corporation. So, after not having on the mound, I have to manually shut down the computer by holding down the power button. When I try to start again, told me to go through the Startup Repair tool. If I jump the repair, I just have to meet the same problem - a computer that will not go beyond the screen "green bar".

  So, I do the Startup Repair, and told me what I do for the restoration of the system. Windows starts normally after the restoration.

  Don't forget, this happens from a full stop. To remedy this, I just never completely shut down my computer. I left running and back just at the beginning of the day. The computer may start restart, it just may not start with a full stop.

  Given the start of repair takes, literally, around 4 or 5 hours of full stops complete, accidental or power outages are a nightmare, I am obliged to wait 5 hours to get access to the computer. Fortunately, I have my laptop.

  If someone has encountered this? I saw people talking about the loop of startup repair, but that's not the point, I have. I have yet to see any discussion of my specific problem.

  Thanks in advance!

  Hello

  4-5 hours to do a startup repair is too long.

  Often you get better results if you a using a DVD of Microsoft Vista startup repair.

  Jose how to do a startup repair, etc. using a DVD of Vista from Microsoft

  Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

  Here is the guide to repair Options using a Vista DVD from Microsoft.

  If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

  Table of contents

  1. Overview of Windows Vista repair options
  2. How to perform an automatic repair of Windows Vista using Startup Repair
  3. Advanced Tools Overview
  4. Conclusion

  If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

  Unfortunately, you have to buy it.

  Here is a link to it:

  http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

  See you soon.

• Using Windows Vista and IE9. Computer is very slow.

  My system is installed with windows vista and using the Explorer 9. My syster is very slow. How can you help me?

  Original title: my system is installed with windows vista and using the Explorer 9. My syster is very slow. How can you help me?

  Hello

  See if this helps you:

  Search for malware, if necessary using the safe mode with networking.

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Once in Safe Mode with network, download and run RKill.

  RKill does NOT remove the malware; It stops the Malware process that gives you a chance to remove it with your security programs.

  http://www.bleepingcomputer.com/download/rkill/

  Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  You can clean your hard drive using these two methods.

  "Delete files using Disk Cleanup"

  http://Windows.Microsoft.com/en-us/Windows-Vista/delete-files-using-disk-cleanup

  Using the free CCleaner program:

  http://www.Piriform.com/CCleaner

  In NO case use the registry cleaning Option in CCleaner

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Update drivers:

  Access the site on your computer or equipment manufacturing > Driver and Software Support Section > search your computer or hardware model number > then your operating system > locate the correct drivers > download and install.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  "Optimize Windows for better performance.

  http://Windows.Microsoft.com/en-us/Windows/optimize-Windows-better-performance#optimize-Windows-better-performance=Windows-Vista

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  It would be a good idea to run the System File Checker tool to see if you have corrupted files

  "How to use the System File Checker tool to fix the files on system missing or corrupted on Windows Vista or Windows 7"

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  If SFC detects serious flaws, you may need to perform a repair upgrade Installation or relocation complete if you don't have a Vista DVD from Microsoft.

  If you can borrow a DVD of Vista from Microsoft you save doing a reinstall full:

  "How to perform a repair for Vista Installation"

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  See you soon.

• my computer is Windows vista and installed microsoft Office Professional 2010 academic

  my computer is Windows vista and installed microsoft Office Professional 2010 academic.  However when I open the program it gives me an error message such as: the application failed to start because its side-by-side configuration is incorrect...  Check the log of events applications for more details.

  Hello

  1. not the problem only occurs when opening Microsoft Office or with all applications?

  2. I suggest you to install Microsoft Visual C++ 2008 and check if it helps.

  Step 1: Install the Microsoft Visual C++ 2008.

  Follow the link to download and install the Microsoft Visual C++ 2008.

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=29 (for 32-bit)

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=15336 (for 64 bit)

  Step 2: Perform a clean boot

  Follow the steps in the link below to perform the clean boot.

  http://support.Microsoft.com/kb/929135

  Note: once you are done with the boot, follow step 7 in the link to your computer in normal mode.

  It will be useful.