hp8600

Similar Questions

• Connectivity HP8600 Pro

  I just unpacked my new HP8600 and I'm confused!
  
  I managed to connect by Ethernet (to which my main desktop PC is attached) and set up eprint. However when I do this the installer tells me that I can't and then connect the printer to my wifi network. This means I can only print from somewhere else in the House by e-mail and not to print directly with laptops that I did with my previous printer.
  
  I tried to remove the Ethernet link and connection by USB, so I can get a wifi connection, but when I started the instructions I was told that if I went eprint would not work.
  
  Before I could print directly laptops in the House by wifi and also by eprint when I wasn't in the House.
  
  I am unable to do it with the ch?
  
  Also, if I use eprint to PDFs will they print? My previous printer faces with Word documents, but not PDF files when you use eprint.
  
  Thank you very much
  
  Ian

  Hi Ian,

  You should be able to set up the printer wireless on your WiFi network by following the described here for the steps http://h10025.www1.hp.com/ewfrf/wc/documentSubCategory?tmp_rule=65678 & tmp_task = setupCategory & cc = us & dlc = in & lang = to & lc = in & product = 4323648

  For your printer model is not necessary to connect via USB to the computer when you install the printer on your wireless network.

  ePrint will not work unless the printer is installed on a wireless network. PDF file format is a format supported on the ePrint service.

  Hope this information helps.

  Best

• HP8600: Wireless router connection

  I installed a new router to my DSL network connection.  I configured my HP8600 printer to my new router but I still can't get my nto computer communicate with my printer.

  The simplest answer is to restart the computer Windows 8.1.  This will help if the problem is an entry port stale in the process of discovery of Windows.

  If the problem is more than that, you can try one of the following solutions.

  1. make sure the printer and the computer are on the same wireless network.  The new router can have several wireless networks and the router can now to route traffic feel between them.

  2. set up an IP address manually on the printer and the configuration of Windows printer as follows:

  - Define printers by the built-in Web server IP address (video link)

  -Follow these instructions for the user ShlomiL to change the printer port configuration Windows 8.1

  Update of the intellectual property of the HP software for one of your PCs. software click the utilities tab, then update the IP address, type the current address and save the changes.

  Finally, on your PC of Windows 8 open the control panel and select devices and printers.

  Right-click on the printer and select printer properties.

  On the Ports tab, create a new port by selecting Standard TCP/IP.

  Follow the screen by using the IP address and save the changes by keeping the Standard TCP/IP port.

• HP8600 does not connect to the ePrint Server

  HP8600 does not connect to the ePrint server at all. I double checked all the settings and I can print to it from my applications when you are connected to the same network, but try to access the server of ePrint from the screen of the printer or the web interface cannot establish a connection.

  The printer is connected via a wireless network and can be printed from any device connected to our network.

  Everything indicates that there should be good. But can't seem to make bad connection ePrint. No error message not developed.

  The printer is on a network of b/g/n 2.4 GHz connected to a Netgear N600 DUal Band (WNDR3700 model).

  Version of the firmware of the printer is CLP1CN1232AR

  Any ideas? It does not appear to be blocked by a firewall, so really lost here.

  Hello

  Try to define an alternative DNS and check if that can help you:

  1. Tap the wireless on the top of the screen of the printer and look for the IP address is.
  2. Navigate to throguh IP of the printer, the web browser on your PC.
  3. Click the network tab.
  4. Under, click IPv4 wireless.
  5. Under the DNS Configuration, select manual.
  6. Set the address preferably as 8.8.8.8
  7. Set the e-mail address alternative as 8.8.4.4
  8. Click on apply to confirm the change.

  Now, turn the printer off and turn it back on and check for the difference.

  Shlomi

• I have two printers same HP8600 on net and rename a.

  In our House, we have two HP8600 printers on the same local network.

  Both installed on WiFI, each with a separate address to HP eprint added.

  This creates a lot of trouble, identifying whitch to send to / scan etc.

  Only a few programs / applications can handle all the details and often we just see two printers, both called HP Officejet Pro 8600!

  Since we use a multitude of PC (win 7) MacBook, iPad, iPhone, etc, we need a change of name built into the printer and not installed on each of our devices.

  Is it possible to rename the database name for example: HP Officejet Pro 8600 A and HP Officejet Pro 8600 B?

  Hi Anderstroi,

  I understand you are trying to change the name of your printer.  In fact, I got the same problem here at work with four different 8600 and of course, I always choose one that is across the room.   I am tired of doing this, so I changed the name of the printer.   Try the procedure described below, it should solve your problem.

  1. open the internet browser type printer IP address.

  2 should bring you to the status of the printer page.

  3. Select the tab network at the top.

  4 on the left side under Advanced settings select Hello.

  5. under the name of Service Hello change that to something you want.

  6. Select apply.

  Let me know how it goes.

  * If you find this useful or mean please make sure you click on the White Star under my name to give me congratulations. **

• HP8600 All In One: HP8600 Panel will go up is no longer on my PC

  HP8600 control panel will open is no longer on my desktop PC

  Hello @Herndon1, greetings!

  Thank you for visiting the Forums from the HP Support! It's a good place to find the help you need, other users, HP experts and other support staff.

  I understand you are trying to access the menu of the printer on your desktop. Try the following steps:

  • If present, disconnect the USB cable between the printer and the computer.
  • Go to control panel of configuration-programs and feature - select the HP 8600 printer entries and uninstall them.
  • Restart your computer.
  • Now, click http://hp.care/2dUYVtJ and enter your printer model number to download and install the printer drivers.
  • Plug the USB cable if necessary.

  Once the new drivers are installed, try to check the functionality.

  Let me know if that helps!

  See you soon

  Please click on 'acceptable' on the post that solves your problem to help others to find the solution. To show gratitude for my help, please click the 'Thumbs Up icon' below!

• OfficeJet Pro 8600 Plus: double-sided printing HP8600 has stopped working

  My HP8600 911 g printer double-sided printing has stopped working. Duplex accessory is still in place. Forum told to go into system preferences, open print queue and click on the driver tab. There is no driver tab. Just, it displays 'Driver 2.0' and does not give me the option to change this.  Don't know why? Duplex to work properly and now it doesn't. Any help would be greatly appreciated. Thank you!

  Hello

  I guess you can use AirPrint driver seeing your description.

  If please, try to add the printers printer & scanner, this time, click the use drop down and select the model of the printer default AirPrint option instead.

  Now check these settings and try to print a double-sided work again.

  Shlomi

• With HP8600 I put the Option for tray 2, but it will pull only from the Tray1

  Envelopes of printer with HP8600 I put the Option for tray 2, but it will pull only from the Tray1.

  Hello finfannc,

  Welcome to the HP Forums.

  I see that you are having problems with printing envelopes from tray #2.

  Just to let you know, the printer will only print envelopes of Lac #1.  Here is the link to the User Guide that will show you what all is supported and what bins what to do. For envelope printing, go to page #165-167 media support and sizes of envelope.

  Thanks for your time.

  See you soon,.

• HP8600: Communication HP 8600 Pro error

  I have a HP8600pro; It works perfectly with all my other devices except my new Lenova 2 of Yoga, which is located on 8.1 64-bit windows.

  I installed the printer drivers, and while troubleshooting I actually uninstalled and reinstalled the drivers to check that there is no problem. I have unplugged the printer, restarted my computer, and still the error persists.  I can scan my 2 Yoga of the HP 8600 without any problem. I can't print

  When I go to print it says that the HP8600 is 'ready' when I hit print, I receive an error message that says: "communication error with the printer.

  I tried the troubleshooting tool HP and printing doctor and he says everything is fine, no problem detected, but I keep getting this error message.

  I called a hotline of Yogi and the tech has suggested that there is a registry error, even if I get no error messages registry.  I know that those are rare too, so it was as if he wanted to sell me a year of service for 199.00.

  Can anyone help?

  Hello @walkerma!

  Thanks for posting on the HP Forums!

  I would be happy to provide you with some suggestions that can help solve the problem!  I see that you are able to scan to the computer with the Officejet 8600 but printing produces a message 'communication error with the printer.  A uninstall and re - install is a great place to start in a question like that! You also mentioned that you ran printing HP and doctor Scan, but showed no problems. It is possible that a firewall on the computer is printing blocking but allowing scanning.

  Open again printing HP and doctor Scan.  Printing and the Scan doctor, you can temporarily disable the firewall and test print.  If printing is successful or not, you will want to go back in printing and scanning doctor and turn on the firewall.  If printing is successful when the firewall is disabled, then I recommend contacting your provider of firewall while allowing access to the printer.

  To disable the firewall:

  Open the print and Scan Doctor

  Click network , at the top of the window next to the file

  Select solve firewalls

  In the Firewall window, select the firewall from the list and click on disable

  Try to print a document again to see if it is successful

  To turn on the firewall:

  Open the print and Scan Doctor

  Click network , at the top of the window next to the file

  Select solve firewalls

  In the Firewall window, select the firewall from the list and click enable

  If please, after back and let me know how it goes!

• Cannot add HP8600 on my desktop, but not problems with wireless devices

  Summary: How do I enter my HP8600 that is connected wireless to a router from a computer that is connected to the router by ethernet cable?

  Description: My HP8600 is in a room in my house.  It is connected wireless to a linksys EA6500 router.  I have no problem setting upward and printing on any device or portable computers that connect wirelessly.  However, I have a desktop computer that is connected to the router via an ethernet cable.  How to use the HP8600 as a printer for my office?

  System information:

  Printer: HP8600

  Router: EA6500 Linksys

  Desktop: Windows XP

  I thought that I could add the printer by setting the static ip address when I try to add the printer and "Connect to this printer"... but he never finds this printer.

  Any help is appreciated, thank you in advance.

  Hello

  Looks like you want to connect to something like the following picture:

  

  Please consult the following manual and set them for your printer:

  http://h10032.www1.HP.com/CTG/manual/c00389927.PDF

  Kind regards.

• Envelope of DLX on HP8600

  I have a new HP8600 which, to this day, I was very satisfied.

  However, today, I had the need to print an envelope.  The envelope in question was size DLX, an Australian Post recommended size.  Unfortunately, it is not listed as a standard size in the HP software (the only series DL is DL itself).

  The printer is too clever in that it recognizes all my attempts to cheat the system by selecting one of the closest other sizes.

  Two questions:

  1 is anyone has a work around?

  2. Please we have DLX among the paper formats predefined in the next software update.

  Thank you

  Bob

  Hey Bob,

  OfficeJet Pro 8600 driver which is included in the software package does not support the format of envelope DLX.  However, you can use another driver to print the envelope of size with the 8600.  I recommend the use of driver HP Deskjet 9800, which uses the same graphical interface of PCL3 the 8600 uses to communicate.

  For more information about how to exchange for another pilot, please click here.

  It is a method/work around for Windows OS'.  If you have a Mac, then please let me know and I can give you a different solution.

  Jason

• HP8600 communication error

  Have a strange problem.  Have the connected (directly wired) HP8600 to my router.    My XP pro desktop that is connected wirelessly, is unable to print with the "unable to connect" dialog box once the work is attempted to send to the printer.  It has a static IP address if its not changing in any way causing problems.   I used the utility of "Update IP address", and he says he sees the printer without problem.   I can also connect with my browser without problem using its ip address. There seems to be no failure of network connection I can detect using nothing else.

  The problem comes on after Office XP Pro worked a little.  If I go back, I can get the printer to work.  I have gone through the troubleshooting, disabled my firewall and use theHPPSdr.exe to check the configuration.   He very well all the reports, but when I try to print I get error in his tent dialog box to send the work.

  I only seem to have problems with printer, everything else on the computer is fine...  You suspect that the printer driver does not correctly or it gets into a conflict with another driver?

  Help, I been putzing with this problem since I have this thing in January.

  Your alerts of ink are probably causing a communication problem.  This document will help you find the options change to correct the problem.  Let me know what happens.

• scanner with HP8600 wireless

  My new HP Envy with windows 8.1 print wireless to my old printer HP8600.

  The 8600 is also a photocopier/scanner.  When I try to SCAN my computer says no scanner installed?  and nothing happens.

  Help, please!  I tried to uninstall/reinstall the printer... with the same results.

  

  Thanks for letting me know it worked! Great news

  If you have a moment, please click on the button "Accept as Solution" on my last post here, so that others in the community can also see our messages in the case, they run in the same question!

  Have a great week!

  

• printing from a pc on a HP8600 wireless printer cable

  At all;

  I have a PC connected to an ISP network and home network wirelessly with an OfficeJet Pro HP8600, what do I need on my PC to print to the printer wireless, recommendations will be greatly appreciated.

  Thank you;

  Juan

  Hi Juan,

  I would recommend selecting Setup on your printer, which is the icon that looks like a key.  In the configuration menu, select the menu wireless/network.  In the network menu, run the Wireless Setup Wizard to connect to your network.

  I would say then download and run the HP printer install wizard for Windows.

  Please hold me.

• Install HP8600 offline after the new modem wi - fi

  I just installed new modem WiFi of Xfinity.  Two laptop computers and printer HP8600 are on the home network.  Both computers connect to internet just fine and a laptop prints to HP8600 well but other laptop displays printer offline and will not print.  Can anyone help? Thank you

  Danleyde,

  Welcome to the HP Forum.

  One of the things that you might try is to reinstall the software of complete functionality on the notebook where it does not work as expected - the installation process is smart enough and can sometimes clear up problems resulting from the change of equipment.

  Install the full features software - printer

  More detailed help is available for this kind of situation; Please look at the following suggestions:

  Replacement of your wireless router

  Click on the Thumbs - Up Kudos to show that you appreciate the help and time of our Experts.

  Although I strive to reflect best practices of HP, I do not work for HP.

  Click on accept as Solution when the answer is a good solution or workaround!