Windows 7 backup fails - error code 0x81000033__

Similar Questions

• Backup failed - error code 80070020 Ox

  What program I need to disable to fix this error?

  Hello al brownWM,.

  In addition to the response of Vijay, I have included a link below for this error trying to perform a backup.  Please check the items listed and let us know the status.  In addition, where you try to save the backup?  If you are using an external drive, you have any device connected via USB?

  Windows 7 backup fails with the error 0 x 80070020

  http://social.technet.Microsoft.com/forums/en-us/WindowsBackup/thread/c6c7682d-d9e5-479c-A10E-ff45aba28d82

• Windows 7 64 bit "last backup failed - error Code Ox80070020"

  Acer Aspire 5745 G notebook computer with Windows 7 Home Premium. Intel i3 CPU M350 @ 2.27 GHz 4 GB of Ram.

  Backup has never been completed successfully on this machine. I tried a normal and system backup, or complete. I tried also to backup on a key USB and a DVD r same error received in both cases.

  I have run CHKDSK C:/f/r and the/scannow STC. No problem detected in both cases.

  Then I ran the backup program, accepting the default settings... Same error received "the backup has failed. Error Code Ox80070020'.

  I have the East went to the backup settings and changed to allow Windows to choose the default value to use to decide. I unchecked "backup data for new users created.  Even if the backup seems further to 60%, before failing and return the above error. Previous backups have failed quickly after the start, 10 to 20% of the progress on the bar.

  When researching the problem on a similar problem in Windows Vista (different error message Ox80070002) has been attributed to a missing "HKLM\Software\Microsoft\Windows\CurrentVersion\WindowsBackup" registry key  Is there a similar key within the registry on my laptop. Searched the registry on my laptop with a negative result.

  Any help would be appreciated. Thank you

  Hello

  Thanks for the quick response.
   
  I understand that you have problems with a service named "event COM system +"(event system) - 'Manual' & 'Automatic'. "."
   
  (a) the name of the service is "system event COM +" (without the quotes) and that the service should have a manual or automatic status. In addition, should be started.
   
  (b) and if this service has a status of disabled or stopped then, follow the steps mentioned below to change the same.
   
  1. right click services, and then click Properties.

  2. If the service is disabled, change status to automatic and if it stops, and then start the service.

   
  3. restart the computer and then check.
   
  I hope this helps. Otherwise, answer this answer and we will be happy to help you again.
   
  Thank you

• Install backup fails error code 0 x 80070032 windows 7

  I tried to backup on my elements external hard drive so I can install 64-bit instead of 32-bit windows 7, but I get the same error code. I searched the forum and internet, check the profiles of regedit, done sfc/scannow, and nothing doesn't seem bad. Help!

  Hello
   
  Remember to make changes to your computer before the problem?
   
  Follow these steps and check if the problem persists.
   
  Step 1: You can check if the backup and restore services are started when you try to make a back up of files.
   
  a. click on start
  b. in the start search box, type Services
  c. click right on - RUN as ADMINISTRATOR

  These are the services that must be running when you try to make a return to the top.

  Automatic started Windows event log
  Task Scheduler started auto
  Backup Windows stopped manual
   
  Step 2: You may want to consider temporarily disabling your security software and then try to save.
   
  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
   
  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Step 3: I would also say that you check your disk for errors.

  Check a drive for errors

  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

  WARNING:
  Important: All performing hard disk the disk check if bad sectors are found on the disk hard disk check is trying to repair this area if all available on which data may be lost

• Backup failed - error Code 0 x 80780169

  Hello world

  Bit of a newby, but every time I try a backup or to create a system image, I get the following error:

  Check your backup
  Backup failed as a snapshot volume of the source has been removed. This could be caused by a high activity in writing to the volume. Try the backup again. If the problem persists, consider growing shadow copy storage using the command "VSSADMIN Resize ShadowStorage".
  Error code: 0 x 80780169
  Curiously, I'm is also trying to partition my drive (300 GB) and it let me just to make a new record of slightly more than 6 GB (which is no where near big enough). I could be wrong, but I guess that everything is connected? Anyone have any ideas on how to solve this problem?
  Kind regards
  Conor

  Hey Conor,

  I thank you for having chosen Windows 8 and offering us the opportunity to help you.

  According to the description, it seems like you get the backup error code: 0 x 80780169.

  However, we need more information to help you better.

  Please help me to answer these questions.

  1 back up tool, which do you use?

  2. what tool do you use to partition the hard drive?

  3. disk how hard you want to save?

  4. what hard drive you want to partition, SSD or IDE?

  Backup tool in Windows 8 is historical files.

  Visit the link to learn more about the history of files feature in Windows 8.

  http://Windows.Microsoft.com/en-us/Windows-8/how-use-file-history

  If you try to create a system image, visit the link for more information on this.

  http://support.Microsoft.com/kb/2748351

  Response with more information to provide a better solution.

• Windows Update KB2491683 failed (error Code: 800 b 0100)

  original title: Windows Update failed KB2491683

  Relative to the update: KB2491683

  Hello

  This update has failed repeatedly. It is the first time this has happened to my system. I am running Vista Service Pack 2. The error code is: WindowsUpdate_800B0100. I followed the instructions for when an update fails and installed Windows
  Setup of launch day, but that didn't work either. I also tried to download it directly from the Microsoft Download Center, but that failed too.

  http://www.Microsoft.com/downloads/en/confirmation.aspx?FamilyId=11a8f240-51b3-4E31-a24a-a235179f3396

  Any ideas on what I should do?

  Thank you

  Marc

  Hi MarcBW,

  Since the update by train to be installed is for the editor to Fax, you happen to have any other software that interacts with faxing?

• Why do I continue to receive backup failed / error code 0 x 81000037?

  And even if I'm good with computer (software), please someone help me in the sep by step directions... I was completely confused with all the computer jargon... (I'm a blonde woman, do I need to say any more - that's my story & I stick to it!) AND I will use that as my excuse for as long as possible! ;)

  Thanks in advance for anyone who can give me a solution.

  Sue

  E-mail address is removed from the privacy *.

  Hello

  I am not specifying that it works for everyone, however... at this pint why not try a more...

  Due to the motherboard died & replaced, (I have a Dell, Windows 7 pro), I also started to receive the error message "wonderful." I studied the error code. I keep trying all the tips & advice, I finally decided to stop to create the "repair disk" & ignore other messages, "create a system image", so I opened the clicked the ' Manager of Dell & Restore backup & complete these two tasks... I then, (pour myself a tall glass of wine & installed for another session of 'try' to solve this error code of backup), I opened the "restore backup manager & Dell new & clicked on"Save"AND the backup is complete!"

  I mean, that's why not to create another image of the system ', create another 'repair disc", & then try to make a backup... If you do not have this issue fixed, you have nothing to lose by trying, right?

  Susan

  Content copied from another thread

  Hi Susan,.

  0 x 81000037: failure of the Windows backup while trying to read from the shadow copy on one of the volumes to back up.
   

  This problem occurs when you try to save a specific library or when you accept the default settings in the backup and restore windows.

  Proceed as from the link below and check if it works.

  Windows backup or restore 0 x 80070001, 0 x 81000037 or 0 x 80070003 errors  

  Good day!

  Please come back if you have concerns.

• Satellite A500 PSAM3E - Windows 7 upgrade failed - error code: 0 x 80070570

  I install the win7 update on my Satellite A500 PSAM3E and when I arrive in windows files is growing - it stop and a pop-up message:

  * (Windows cannot install required files. The file may be corrupted or missing. Make sure all files required for installation are available, and restart the installation. Error code: 0 x 80070570). *

  Stop the installation and I could do nothing, I restarted the upgrade but still the same.

  I just got my win7 DVD from Toshiba, the corrupt DVD upgrade or other issues, before the installation, a message appears that I need to uninstall install ATI Catalyst and ATI catalyst Control Panel.

  Need help from the expert who have already done the upgrade.

  Hello

  > before installation, a message appears that I need to uninstall install ATI Catalyst and ATI catalyst Control Panel.
  And why you didn t do?
  Maybe you run an earlier version of the display drivers and so you should uninstall them before you start the upgrade.
  Check it!

  After the upgrade, you can install the latest version of the Toshiba page display driver.

  By the way: Here you can find an update step by step:
  http://APS2.toshiba-tro.de/KB0/TSB9902P60000R01.htm

• Updates Windows 7 has failed: error code 646

  Every time my computer trying to install MS security updates most of the updates fail.  I currently have 19 updates which will not be installed.  I get the error code 646.  I have disbling my firewall while trying to install updates, but that did not help.  I'm on a wireless network if this has an impact on it.  Please help me find a solution.  Thank you.  KAH42

  Kah,

  the KB includes an automated fix this that solves the problem. Look here: http://support.microsoft.com/kb/2258121

• Restore Vista backup failed: error code 0 x 80070015

  Installed the new hard drive on laptop. Try to restore the files from the latest backup set located on an external drive. I get the error code 0 x 80070015 when I try to restore all the files, but I can restore files/folders manually. I read a response to try to restore in safe mode, but the backup and restore is not supported in Safe Mode.

  How can I restore my files automatically without having to restore files individually?

  Thanks for your help

  Hello

  see if this information helps you

  How to make a backup of your data

  http://www.vista4beginners.com/how-to-backup-your-data

  How to restore your files

  http://www.vista4beginners.com/how-to-restore-files

  the 1st link below is how do the backup complete pc

  http://www.bleepingcomputer.com/tutorials/tutorial145.html

  and that is how do to recover the backup complete pc

  http://www.bleepingcomputer.com/tutorials/tutorial144.html

  If you have problems, it's in here is a forum for microsoft specifically for backup issues

  http://social.technet.Microsoft.com/forums/en-us/WindowsBackup/threads

• The Windows 7 Installation failed, error code: 0 x 80070017

  I own a legal copy of DVD of Windows 7 64-bit. I'm trying to reinstall it on my computer, which, for the time being, has no operating system installed, but 13% of expanding windows files, I always get the following error message:

  Windows cannot install required files. The file may be corrupted or missing. Make sure all files required for installation are available, and restart the installation. Error code: 0 x 80070017

  What is the problem, how can I fix it? Is my Windows 7 disc damaged?

  If you have downloaded Windows 7 and it burned a DVD test burn again at the slowest speed possible. It is also possible the download may have errors, you can try to download it again.

  If you have several hard drives remove all except the one that you install Windows 7, and then replace it after Windows 7 is installed.

  Disconnect all external devices except the keyboard and mouse before installing.

  If using a video card and the computer has integrated video use and remove the video card.

  Unplug the computer from the internet, if you have wireless disable.

  RAM (memory) - reduce the amount of RAM. 1 GB if 32-bit installation, 2 GB for 64-bit, then replace RAM if the upgrade was successful. If you added new RAM make sure it is also compatible.

  Windows 7 installation disc does not

  Just a few troubleshooting steps to see if the drive is bad or if the DVD player is bad:

  If you have another DVD player available try to use this drive in your computer instead.

  If you have another computer available, try the disc of Windows 7 by using this computer and see if it can read the disc, or if the disc cannot be read and is bad.

  In addition, if you purchased the retail version of Windows 7 try to put in the other disk of type bit of the Windows 7 disc and see if it works properly.

  If you cannot start Windows 7 installation disc, your computer can boot from other bootable disks?

  How to replace Microsoft software

  http://support.Microsoft.com/default.aspx/KB/326246

  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

• Update for Windows XP (KB2567680) security has failed - error Code: 0 x 80070003

  Security update for Windows XP (KB2567680) failed - error Code: 0 x 80070003 I tried to install update 3 - 4 times but it continues to not be updated, can someone please tell me what to do.

  You receive an error '0 x 80070002' or '0 x 80070003' code after you download an update from Windows Update, Microsoft Update or Windows Server Update Services
  http://support.Microsoft.com/kb/910336

  When you search for available updates on the update site, you see the Error 80070002 0 x or 0 x 80070003
  http://update.Microsoft.com/windowsupdate/v6/showarticle.aspx?articleid=17&LN=EN&IsMu=false

  Error message when you try to download the updates on the Microsoft Windows Update Web site or from the Microsoft Update on a Windows XP computer's Web site: "0 x 80070003".
  http://support.Microsoft.com/kb/916248

  Some have had success with

  1. stop the service automatic updates, clear the contents of the DataStore and Download folders and restart the automatic updates service.
  Stop the automatic updates Service.
  Click Start, choose Run, in the run box type services.msc.
  Click OK.
  Right-click the automatic updates service.
  Select Properties.
  Under Service status, click on stop.
  Click OK.

  2 remove the contents of the DataStore and Download files.
  Click Start, choose Run, in the run box, type %windir%\SoftwareDistribution
  Click OK.
  Delete the contents of the DataStore files so download

  3. start the Service automatic updates
  Click Start, choose Run, in the run box type services.msc.
  Click OK.
  Right-click the automatic updates service.
  Select Properties.
  Under Service status, click Start.
  Click OK.

  This procedure will erase your history on the Windows Update Site.

• Access to the Windows Update site 0x8024402C error code failed?

  Access to the Windows Update site 0x8024402C error code failed? Regds, 'a journey of a thousand miles begins with a first step."

  Resolution: 0x8024402C error Code

  Method 1: Remove the characters from the list of exceptions to the proxy and then clear the proxy cache to do this, follow these steps, as appropriate for the operating system that you are running. Windows 2000, Windows XP and Windows Server 2003

  1. Open Internet Explorer.
  2. On the Tools menu, click Internet Options.

     Note If the menu is not available in the Internet Explorer window, press the ALT on the keyboard to display the menu.

  3. Click the Connections tab and click LAN settings, and then click Advanced.
  4. Remove all the entries in the Exceptions section, and then click OK.
  5. Close Internet Explorer.
  6. Click Start, run, type cmd, and then click OK.
  7. Type the following commands. Press ENTER after each command.
     • proxycfg d
     • net stop wuauserv
     • net start wuauserv
  8. Try again to install updates.

  Windows Vista and Windows Server 2008

  1. Open Internet Explorer.
  2. On the Tools menu, click Internet Options.

     Note If the menu is not available in the Internet Explorer window, press the ALT on the keyboard to display the menu.

  3. On the Connections tab, click LAN settings, and then click Advanced.
  4. Remove all the entries in the Exceptions section, and then click OK.
  5. Close Internet Explorer.
  6. Click Start
     The collapse of this image enlarge this image

     

     , and then type cmd in the box start the search.

  7. In the list of search results, right-click on Cmd.exe, and then click Run as administrator.
     The collapse of this image enlarge this image

     

     If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  8. Type the following commands. Press ENTER after each command.
     • netsh winhttp reset proxy
     • net stop wuauserv
     • net start wuauserv
  9. Try again to install updates.
   

  Method 2: Enable the option "Automatically detect connection settings" in Internet Explorer to do this, follow these steps:

  1. Open Internet Explorer.
  2. On the Tools menu, click Internet Options.

     Note If the Tools menu is not available in Internet Explorer, press the ALT key to display the menu.

  3. On the Connections tab, click LAN settings.
  4. Click to select her automatically detect settings check box, and then click OK.
  5. Try to install updates again.

  Kind regards
  Sohail Patel Regds, 'a journey of a thousand miles begins with a first step."

• Windows Update KB948465 8024200d error code failed.

  Windows Update KB948465 8024200d error code failed.

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
  [0 x Error 80070002; 0x8007000D; 0 x 80073712; 0x800B0100; & 0x8024200D]
  http://support.Microsoft.com/kb/947366

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been extended until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Update for Windows Vista Service Pack 2 (KB948465) repeatedly fails - error Code 80246007

  Update for Windows Vista Service Pack 2 (KB948465) repeatedly - fails error Code 80246007.  BITS ok - Microsoft 'Fix' detected 'problems' and 'fixed '.

  them, but the update continues to fail.  Any help would be appreciated.

  Hello

  Perform the steps from the link below and see if it helps.

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues

  Hope this information helps.