Backup failed - error code 80070020 Ox

Similar Questions

• Windows 7 64 bit "last backup failed - error Code Ox80070020"

  Acer Aspire 5745 G notebook computer with Windows 7 Home Premium. Intel i3 CPU M350 @ 2.27 GHz 4 GB of Ram.

  Backup has never been completed successfully on this machine. I tried a normal and system backup, or complete. I tried also to backup on a key USB and a DVD r same error received in both cases.

  I have run CHKDSK C:/f/r and the/scannow STC. No problem detected in both cases.

  Then I ran the backup program, accepting the default settings... Same error received "the backup has failed. Error Code Ox80070020'.

  I have the East went to the backup settings and changed to allow Windows to choose the default value to use to decide. I unchecked "backup data for new users created.  Even if the backup seems further to 60%, before failing and return the above error. Previous backups have failed quickly after the start, 10 to 20% of the progress on the bar.

  When researching the problem on a similar problem in Windows Vista (different error message Ox80070002) has been attributed to a missing "HKLM\Software\Microsoft\Windows\CurrentVersion\WindowsBackup" registry key  Is there a similar key within the registry on my laptop. Searched the registry on my laptop with a negative result.

  Any help would be appreciated. Thank you

  Hello

  Thanks for the quick response.
   
  I understand that you have problems with a service named "event COM system +"(event system) - 'Manual' & 'Automatic'. "."
   
  (a) the name of the service is "system event COM +" (without the quotes) and that the service should have a manual or automatic status. In addition, should be started.
   
  (b) and if this service has a status of disabled or stopped then, follow the steps mentioned below to change the same.
   
  1. right click services, and then click Properties.

  2. If the service is disabled, change status to automatic and if it stops, and then start the service.

   
  3. restart the computer and then check.
   
  I hope this helps. Otherwise, answer this answer and we will be happy to help you again.
   
  Thank you

• Windows 7 backup fails - error code 0x81000033__

  I'm trying to save on a new unused external hard drive, the backup fails and the code sends 0 x 81000033. lack of space.  The hard drive is formatted in NTFS - what should I do to make it work.  I am using windows 7 ultimate on a 64-bit computer. Help, please

  Hi ambjod,

  Please quote the complete error message you receive.

  You can see the steps in the link below that addresses this issue by M Thahaseena,

  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/a499b76d-5e5b-4C1B-b3ee-8af7ef5728eb

  Thanks and greetings

  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Backup failed - error Code 0 x 80780169

  Hello world

  Bit of a newby, but every time I try a backup or to create a system image, I get the following error:

  Check your backup
  Backup failed as a snapshot volume of the source has been removed. This could be caused by a high activity in writing to the volume. Try the backup again. If the problem persists, consider growing shadow copy storage using the command "VSSADMIN Resize ShadowStorage".
  Error code: 0 x 80780169
  Curiously, I'm is also trying to partition my drive (300 GB) and it let me just to make a new record of slightly more than 6 GB (which is no where near big enough). I could be wrong, but I guess that everything is connected? Anyone have any ideas on how to solve this problem?
  Kind regards
  Conor

  Hey Conor,

  I thank you for having chosen Windows 8 and offering us the opportunity to help you.

  According to the description, it seems like you get the backup error code: 0 x 80780169.

  However, we need more information to help you better.

  Please help me to answer these questions.

  1 back up tool, which do you use?

  2. what tool do you use to partition the hard drive?

  3. disk how hard you want to save?

  4. what hard drive you want to partition, SSD or IDE?

  Backup tool in Windows 8 is historical files.

  Visit the link to learn more about the history of files feature in Windows 8.

  http://Windows.Microsoft.com/en-us/Windows-8/how-use-file-history

  If you try to create a system image, visit the link for more information on this.

  http://support.Microsoft.com/kb/2748351

  Response with more information to provide a better solution.

• Restore Vista backup failed: error code 0 x 80070015

  Installed the new hard drive on laptop. Try to restore the files from the latest backup set located on an external drive. I get the error code 0 x 80070015 when I try to restore all the files, but I can restore files/folders manually. I read a response to try to restore in safe mode, but the backup and restore is not supported in Safe Mode.

  How can I restore my files automatically without having to restore files individually?

  Thanks for your help

  Hello

  see if this information helps you

  How to make a backup of your data

  http://www.vista4beginners.com/how-to-backup-your-data

  How to restore your files

  http://www.vista4beginners.com/how-to-restore-files

  the 1st link below is how do the backup complete pc

  http://www.bleepingcomputer.com/tutorials/tutorial145.html

  and that is how do to recover the backup complete pc

  http://www.bleepingcomputer.com/tutorials/tutorial144.html

  If you have problems, it's in here is a forum for microsoft specifically for backup issues

  http://social.technet.Microsoft.com/forums/en-us/WindowsBackup/threads

• Why do I continue to receive backup failed / error code 0 x 81000037?

  And even if I'm good with computer (software), please someone help me in the sep by step directions... I was completely confused with all the computer jargon... (I'm a blonde woman, do I need to say any more - that's my story & I stick to it!) AND I will use that as my excuse for as long as possible! ;)

  Thanks in advance for anyone who can give me a solution.

  Sue

  E-mail address is removed from the privacy *.

  Hello

  I am not specifying that it works for everyone, however... at this pint why not try a more...

  Due to the motherboard died & replaced, (I have a Dell, Windows 7 pro), I also started to receive the error message "wonderful." I studied the error code. I keep trying all the tips & advice, I finally decided to stop to create the "repair disk" & ignore other messages, "create a system image", so I opened the clicked the ' Manager of Dell & Restore backup & complete these two tasks... I then, (pour myself a tall glass of wine & installed for another session of 'try' to solve this error code of backup), I opened the "restore backup manager & Dell new & clicked on"Save"AND the backup is complete!"

  I mean, that's why not to create another image of the system ', create another 'repair disc", & then try to make a backup... If you do not have this issue fixed, you have nothing to lose by trying, right?

  Susan

  Content copied from another thread

  Hi Susan,.

  0 x 81000037: failure of the Windows backup while trying to read from the shadow copy on one of the volumes to back up.
   

  This problem occurs when you try to save a specific library or when you accept the default settings in the backup and restore windows.

  Proceed as from the link below and check if it works.

  Windows backup or restore 0 x 80070001, 0 x 81000037 or 0 x 80070003 errors  

  Good day!

  Please come back if you have concerns.

• Install backup fails error code 0 x 80070032 windows 7

  I tried to backup on my elements external hard drive so I can install 64-bit instead of 32-bit windows 7, but I get the same error code. I searched the forum and internet, check the profiles of regedit, done sfc/scannow, and nothing doesn't seem bad. Help!

  Hello
   
  Remember to make changes to your computer before the problem?
   
  Follow these steps and check if the problem persists.
   
  Step 1: You can check if the backup and restore services are started when you try to make a back up of files.
   
  a. click on start
  b. in the start search box, type Services
  c. click right on - RUN as ADMINISTRATOR

  These are the services that must be running when you try to make a return to the top.

  Automatic started Windows event log
  Task Scheduler started auto
  Backup Windows stopped manual
   
  Step 2: You may want to consider temporarily disabling your security software and then try to save.
   
  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
   
  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Step 3: I would also say that you check your disk for errors.

  Check a drive for errors

  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

  WARNING:
  Important: All performing hard disk the disk check if bad sectors are found on the disk hard disk check is trying to repair this area if all available on which data may be lost

• Windows Vista (KB2419640) security update fails error code 80070020

  I tried to resolve this error by following the instructions to aid in safe mode and restart it. I have even downloaded the Microsoft fix it tool, but the update still fails

  Hello

  I you have to check out these items-

  http://support.Microsoft.com/kb/883825

  http://Windows.Microsoft.com/en-GB/Windows/Windows-Update-Error-80070020#1TC=Windows-Vista

  Note: Make sure that get you the computer to a Normal startup after performing all the troubleshooting steps.

  Disable the firewall and the antivirus puts your computer at risk. Make sure that restore you the changes as soon as possible.

  Thank you.

• kb2633171 a security update wont install windows vista and keeps on saying failed in the history of updates with the error code 80070020

  Original title: kb2633171 security update will not install windows vista

  Hello

  as noted above, the kb2633171 of security update will not install on my computer used windows vista laptop. I had mcafee installed since the first day (it came with the pc). He continues saying failed in the history of updates with the error code 80070020. When I restart the pc, it says that it cannot configure the update and it is up to the old settings.

  I ran the fix it and aggressive to solve this problem, no luck :-(

  any help muchly appreciated.
  Thank you!

  Chiara

  Hi Chiara,

  Try following the steps in the following article.

  You receive error 0 x 80070020 when you use the Windows Update Web site or the Microsoft Update Web site to install the updates

  http://support.Microsoft.com/kb/883825

   

  Let us know if it helps.

• Impossible to update Kb2570791 failed with the error code 80070020

  Microsoft windows vista KB2570791 security update cannot be installed with many attempts and each time showed error code 80070020.  Anyone have asolution or can have the experienced, like very some remedy.

  Thank you very much
  Willy

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/im-getting-a-failed-popup-message-on-trying-to/e9e7b42d-4fa8-4842-a7f8-738cf1bbb009

  0 x 80070020 -2147024864 STIERR_SHARING_VIOLATION the process cannot access the file because it is being used by another process

  You receive error 0 x 80070020 when you use the Windows Update Web site or the Microsoft Update Web site to install the updates

  http://support.Microsoft.com/kb/883825>

  UTC/GMT is 10:47 Tuesday, September 6, 2011

• KB2656374 update failed to install and get the error code 80070020

  Try to install update KB2656374 and get the error code 80070020. How can I fix this please?

  Hello

  1. who is the antivirus installed on the computer program?

  2 have you made any changes to the computer before the show?

   
   

  Perform the steps described in the article:

  You receive error 0 x 80070020 when you use the Windows Update Web site or the Microsoft Update Web site to install the updates

  http://support.Microsoft.com/kb/883825

   
  WARNING: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
   

  I hope this helps.

• KB2699988 update fails with error code 80070020

  My system running Windows Vista Home Professional with Service Pack 2 has tried to install KB2699988 many times and still no update. The failure of the update gives the error code 80070020. I performed the recommended including troubleshooting steps: restart in Mode safe and running Fix - it for correct update modules without being able to properly install the update.

  How to install the update?

  Thank you for your patience. In reality, the problem has been fixed just by Microsoft delivering the KB2719177 update that replaces KB2699988.

• Can not install KB2676562 and KB2679255 keep receiveing an error code 80070020

  There was a series of updates released in May.  I finally got most of them to installed yesterday after installing all one by one.  Now I have failed to install 2 pertaining to KB2676562 and KB2679255.  I get the error code 80070020 on two of them.  I have Vista Home Premium SP2 32 bit OS.  I run the trend and Malwarebytes.  When I look up error code it tells me to make one of the two restarts) 1 start Windows Update in safe mode or 2) start Windows Update with a clean reboot of Windows.  Neither of these 2 options works and I'll add that the start in Safe Mode option requires you to "Click on the safe boot check box, click Network and then click OK."  I don't know why, but I cannot check this box sound as if it is grayed out.  I am the owner of this PC so I think I should be able to check that box and can not.  Someone at - it any other suggestions for me, please help if you can I'm so frustrated with this.

  Hello

  See the help article and tell us if it helps.

  You receive error 0 x 80070020 when you use the Windows Update Web site or the Microsoft Update Web site to install the updates

  http://support.Microsoft.com/kb/883825

• "Restore failed, error Code 1117

  I'm doing a system restore on a gateway nv 79 with the backup disc, I did when the computer was purchased.  I get all the way up to 86 percent brand and get "restore failed, error Code 1117, not able to perform due to an i/o error."  I can get nowhere excpet the F2 screen, so I don't know what the problem

  Hello

  ·        You did changes to the computer before the show?

  ·        You are able to boot to the desktop in normal mode?

  Method 1: If you are not able to boot to the desktop in normal mode then I suggest to start in safe mode with command prompt and run the disk check to the following address:

  CHKDSK X: /R

  Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.

  Reference: Startup options (including safe mode) advanced

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Method 2: follow the instructions from the link to fix the problem:

  Error message when you try to perform a full backup on a Windows Vista-based computer: "the application cannot be performed because of an i/o device error."

  http://support.Microsoft.com/kb/952272

  Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.

• Converter Standalone Agent installation failed, error code: 1601

  Hi all

  I downloaded the VMware converter tryware version, to see if we can use this tool to create virtual machines from existing industrial PC.

  We intend to make a test remote backup to a XP to a laptop machine (to keep mobile in an industrial environment)

  I installed you VMware converter and disabled the firewall on both machines.

  I also disabled the network drives that are shared on the remote computer.

  When data powered the remote computer has been entered (ip address, username, PW, BONE family) and press us Next, the pop-up appears to deploy the Agent of Standalone converter.

  If you press 'Yes' to continue, after a minute or two the following message appears:

  -Converter Standalone Agent installation failed, error code: 1601 -.

  Can someone tell me what this error code means and how I can fix this error?

  Any help will be appreciated cincerely!

  Sincere friendships and thank you in advance,

  Marcel Lefèvre

  the Netherlands

  Can someone tell me what this error code means and how I can fix this error?

  Windows Installer error 1601 = The Windows Installer service could not be accessed. Contact your support team to verify that the Windows Installer service is properly registered.

  Additionally, make sure that the appropriate ports are open to allow the Windows agent to settle.

  Alternatively, you can manually install the converter on the remote system agent... and then try to restart the conversion (then there is no need to install anything).

  Kind regards

  Jonathan

  B.SC., RHCT, VMware vExpert 2009

  NOTE: If your question or problem has been resolved, please mark this thread as answered and awarded points accordingly.