Windows 7 blocking somehow a correct installation of the AMD CATALYST OMEGA drivers

Similar Questions

• Windows cannot copy files required for installation. The files may be damaged or missing. Error code: 0 x 80070241.

  I had a lot of trouble trying to install the 64-bit version of windows 7 Home Premium on my 64-bit vista, and my question is multi-part. If it is relevant, it's my 2nd copy of windows 7 I have tried. Initially, I had the problem of not being able to run the installation on two copies with the error "'autorun.dll' could not be found or is damaged. Error code is [0x7E]. "However, I managed to get into with my 2nd copy installation after restarting my computer. Once in Setup, I got another error that stopped the installation that says "windows not could create an installation folder. Error code is 0 x 80070017. "Again, I rebooted my computer and started the installation again, this time following installation was decently through but stopped when I got the error"Windows cannot copy files required for installation. The files may be damaged or missing. Error code is 0 x 80070241. "I then backed up and restarted my computer and then tried to use the option to install custom but then got the error"E:\sources\autorun.dll is not designed to run on windows or it contains an error. Try to install the program using the original media, or contact your system administrator. "coupled with the error"the file 'autorun.dll' could not be loaded or is corrupt. Error code is 0xC1"again once I restarted and tried the custom option but got the error" Windows has no load the required file WinSetup.dll.» The file is possibly corrupted. To install windows, restart the installation. Error code is 0x3E6. "I restarted my computer and tried the custom triple option more and still have the error"Windows cannot copy files required for installation. The files may be damaged or missing. Error code is 0 x 80070241. »

  I understand that my problem is very complex, but it seems to be built around a missing or damaged file. Thanks if you can tell what's wrong or what to do.

  Tips for solving common problems when Windows 7 won't install troubleshooting

  1. start Windows Upgrade Advisor to see if there are known issues that might affect the installation and correct them.
  http://Windows.Microsoft.com/en-us/Windows/downloads/Upgrade-Advisor

  2 disable any security software, including anti-virus programs and firewalls.
  3 make sure that your computer has the BIOS and latest drivers.
  4. disconnect all external devices except the keyboard and mouse before installing.
  5. If your computer/motherboard integrated video use and remove the dedicated video card.
  6. If you have a large amount of RAM (memory), try to reduce the amount of RAM installed. 1 GB if 32-bit installation, 2 GB for 64-bit, then replace RAM if the upgrade was successful.
  7. If you have downloaded Windows 7 and it burned a DVD test burn again at the slowest speed possible. It is also possible the download may have errors, you can try to download it again.

  8. check your RAM (memory) to find errors. This can take some time.
  (A) Insert the Windows 7 DVD and restart the computer.
  (B) start from the Windows 7 DVD.
  (C) select your language, and then click Next.
  (D) click on "repair your computer" then select the operating system to fix it.
  (E) click on the link of the Memory Diagnostics in the system recovery menu.
  (F) the computer will restart and your memory is checked for errors.

  9 turn off startup programs:
  (A). Click Start, type MSCONFIG in the search box and press ENTER.
  OK the authorization of user account control and password if necessary
  If you are using XP: click Start, run, and type: MSCONFIG and click OK.
  (B) on the general tab, click Selective startup.
  (C) just below the selective startup, clear the checkbox "Load Startup items".
  (D) click the Services tab, check "Hide all Microsoft Services", and then click Disable all.
  (E) click OK, and then restart the computer.
  (F) try the upgrade again.

  (NOTE: If the upgrade fails and you continue to use your rear security software, then also go back into MSCONFIG and under the general Tower XP/Vista tab, click "Normal startup", and then click OK to exit.)

  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

• Upgrade Vista to Windows 7 error: "Windows cannot copy files required for installation. The files may be damaged or missing. Error Code Ox80070017.

  I am upgrading of Windows Vista Home Premium (32-bit) for Windows 7 Home Premium (32 bit) - but getting stopped everytime I try, I end up with a dialog box stating: "Windows cannot copy files required for installation. The files may be damaged or missing. Make sure all files required for installation are available, and restart the installation. Error Code Ox80070017.

  What should I do to resolve this problem and allow full of Windows 7 installation? (my computer is a Compaq Presario V6000).

  Hello

  What installation media you are using?

  Method 1:

  Error 0 x 80070017 translates "CRC error" which means that the files that are copied from the disc are not making it to the hard drive with the same structure, which means that the 'original' the disk files are modified/changed/corrupted while being copied to the location of the 'destination' on your disk during Setup.

  This usually means a bad DVD, or an error reading on the DVD player.

  I suggest you follow the link and check.

  Upgrade Windows Vista to Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-Vista-to-Windows-7?T1=tab02

  Method 2:

  Temporarily disable the antivirus on the computer running software and check if you are able to install the software.

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  WARNING: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  WARNING: There may be loss of data through an analysis using firewall to eliminate the virus as appropriate

  Method 3:

  I also suggest you to follow the link and check.

  Check your hard drive for errors

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  Important: When running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

• Tips for Lightroom 6 help indicates again that if "using a graphics card AMD/ATI under Windows 64-bit with the AMD Catalyst driver 15.7 and Lightroom CC/Lightroom 6 hangs or crashes during launch or when you edit an image in the develop module.»  This

  Oops... .the everything in the title... My apologies!

  Tips for Lightroom 6 help indicates again that if "using a graphics card AMD/ATI under Windows 64-bit with the AMD Catalyst driver 15.7 and Lightroom CC/Lightroom 6 hangs or crashes during launch or when you edit an image in the develop module.»  This problem may occur when you use AMD Radeon HD 5xxx card graphics series 8xxx running versions of pilot 14.501.1003, 14.502.1014 and 15.200.1062.1004. For the Solution of the page install the AMD Catalyst 15.8 Beta Driver for Windows (posted August 31, 2015).  However, there are now a 16.1 driver... would this work with Lightroom 6buttons Photpshop CC without problem or should I stay with 15.8 beta for Windows driver (Windows 8.1.

  Thank you very much

  Paul Winstone

  Hi Paul,.

  This article was created when users have faced problem with old drivers for AMD graphics card.

  Yes, you can upgrade to the last 16.1 pilots and who should work well however, you should have 1 GB VRAM or more to take advantage of the GPU processors.

  Kind regards

  Claes

• Correct installation of the new hard drive for Windows 7

  Have a disk hard fatal crash with Dell OEM Windows 7on, so I bought a new hard drive compatible system and have my old system Win 7/recovery of data on a memory stick. It's been years that last I formatted, partitioned and installed an operating system on a new hard drive and I totally forgot how it's done. Vaguely remember some DOS commands were required to work out of BIOS (?). Can anyone list the individual measures to be taken, assuming that the hard drive is physically installed and turned on? It would be a great help!

  Unless this stick memory has on her installation files as well, you cannot reinstall win7 on the new hard drive

  You will need the DVD / or the ISO of Win7.

  ]

  And no you do not need BACK. Just the dvd or ISO / to boot from. Then you can format / partition in the configuration screen

• Create a Windows Server 2008 R2 DVD for Installation of the EFI

  Is there an official method of production of compatible installation media EFI for Windows Server 2008 R2.
  I created successfully using a rough method to recreate an iso using the original media and oscdimg.exe set out in a number of unoffical positions elsewhere.  However, I ran into another issue that fits the description that is described in the following article.

  http://support.Microsoft.com/kb/975535

  I expected that the fix provided in this article would have been incorporated in SP1 of Server 2008 R2 version, but has been unpleasantly surprised to find that there was still no support. I'm more than happy to include the fix in the media but it seems that the files are identical apart from the creation date.

  I have completely updated the firmware of my server to set the server up to EFI Shell Version 2 which I hoped would solve some problems, but this did not help either.

  It seems EFI will be the way forward because of size limits of hard drive on startup disks until when can we expect a real sollution?

  If anyone has any experience with this issue so any help would be greatly appreciated.
  Thank you

  Hello

  You can find the Server forums on TechNet support, please create a new post at the following link:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• Windows XP Pro does not correctly load after the release of the Radeon graphics driver

  Hello

  I have a Shuttle XPC with Windows XP Pro and an ATI Radeon Sapphire graphics card. The entire system is 5-6 years, if that helps my raw description.

  My graphic card Radeon has had performance problems, so I downloaded ATI "autodetect tool" and he did choose the update of the driver concerned. After installation and reboot, my PC load Windows XP, but remains unused in ' grainy 8 colors low resolution version ' of my office. No icons, toolbar or whatever it is well visible. The mouse moves the pointer autour, but does not respond to clicks. The only combination of keys which gives anything is Ctrl + Alt + Delete, raise the usual options (in this case useless) to lock the computer, close the session, stop etc.

  In short, it seems that I'm not really on my desk, even if it loaded my wallpaper by default.

  'Safe mode' or "last working configuration" does not take me anywhere useful.

  How to contact with the system to at least start to change my settings for graphics cards?

  I thank very you much for any help.

  Hello

  I suggest to follow the steps provided and check if it helps.

  Method 1: How to fix a computer that does not start.

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/how-to-fix-computer-that-will-not-start

  More information: Advanced Troubleshooting for General startup problems in Windows XP: http://support.microsoft.com/kb/308041

  Hope this information is useful.

• E-mail client reset to Windows Mail from Office Outlook on installation of the latter: How can I do this?

  I recently installed MS Office and of course Outlook has been installed too. Previously, I was able to send a link to Firefox by clicking on the file option and Windows Mail (my preference) would be the load with the link included in the email that I send. She insists now loads of Office Outlook. How do I re-set to Windows Mail? Thank you.

  Hello steve, please refer to change the program used to open links in e-mail

• Windows Vista unable to boot after installation of the update

  Hello.. I don't know where to ask this question... About 3 days ago my computer was working fine with Vista.  I closed the lid of my laptop, and when I opened it, it is stuck on the green scroll of the taskbar with Microsoft Corporation under him, as when you start up.  I run a system check, startup repair, restored to an earlier date... all I can think about... short reformatting and reloading... suggestions?  I am a teacher and my notebook (which is due by next Friday) is caught in the trap in the confusion!  Thank you
  Jenn

  Hi KieransMon08,

  Thank you for using answers Forum.

  Do you mean the computer freezes on this screen, forcing you to restart the computer from the laptop power button?
  You can log in in safe mode?

  Are there any error messages, that you can post on this forum?
  What happened when you tried to do system restore, did it fail or simply not to solve this problem?
  You have a Vista installation disc, or you use a recovery disk?
  How were you running the System File Checker and system restore?

  Impatience back on your part.
  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• WebEx: Window popup block showing who's speaking when the users speak

  Here's the scenario:

  I present to you a WebEx Conference of a large group of people live, as well as to people connected to virtually.

  When one of the virtual people start talking, a small window will appear in the upper right. This area becomes annoying. Is it possible to disable it?

  webexhelp.jpg

  

  Hello

  Unfortunately, there is nothing that you can configure for this stop appearing. However, you can enter this window pop up with the mouse and make it completely on one side, so it would be barely seen.

  I hope that this might work for you.

  -Dejan

• HP ACT026TX: INSTALLATION OF THE AMD DRIVER

  I repeatedly install and uninstall the drivers of graphics from amd (R 5 330) but its not working not properly.

  It's very critical problems with laptops this configuration, I also install Windows 7 32 bit and after I installed window 7 64 bitbut problems not yet resolved.

  HP supporter please remove this problem.

  VIPIN2015

  First of all, we are not HP Support; Instead, we are a group of volunteers who help people solve their problems.

  Second, this model you provided has 13 different variants, all with different drivers.  To direct you to the drivers for your computer, please follow the instructions in the link to find the number of your detailed product: find your model of HP product number. HP® customer support

  Once we have this, we can see if there are drivers HP Win7 for your PC.

• Cannot boot from the Windows 7 installation DVD. Error when installing XP "this installation disc is not compatible with your version of windows. To upgrade, you need the correct installation disc.

  Please help me

  Why my cd not DVD boot? will have a difficult time install my win7 home ed I have xp and the note ""this installation disc is not compatible with your version of windows. " To upgrade, you need the correct installation disc. For more information, see your computer system information. To install a new copy of Windows, restart (boot) your computer using the installation disc, and then select custom (advanced option). "always keep flashing... I already did your post, but I cant stand dvd always turn to windows xp? and my driver working I just installed win xp months ago

  Hi the prey,

  ·         What is the brand and model of the computer?

  You should check the settings of the computer BIOS (Basic Input\Output System) to boot from the CD/DVD. Check the manual or the support of the computer Web site for the same.

  Note: Be careful when you change the BIOS settings. The BIOS interface is designed for advanced users, and it is possible to change a setting that can prevent your computer from starting properly.

  Run the Windows 7 Upgrade Advisor to see if your computer is compatible to install Windows 7.

  Windows 7 Upgrade Advisor - download - Microsoft Windows

  See also:

  Installation and reinstallation of Windows 7

• Windows says dell somehow prevents me to save my copy of windows after a reinstall

  My hard drive died so I reinstalled my copy of windows 7 64-bit edition Home premium, but I can't seem to register even though I'm pretty sure that the code. (The laptop is more than 3 years old and the sticker has rubbed off a bit)

  I talked to windows, and they said that if it was a problem with the code then Dell would have a copy associated with my hardware because it is preinstalled.

  I talked to dell, but don't talk to me because my warranty missed a long time ago.

  Then I spoke to windows again and gave them control of my computer, they searched and tried various things that I fear, I did not understand and then told me that Dell had blocked somehow my registration.

  I don't understand how that could be, but windows support told me I need dell to unblock me.

  can someone please help me understand what is happening?

  This common problem where clients are stuck between Dell and Microsoft and the OEM-Microsoft-client blame triangle.

  Dell Windows 7 presets and reinstallation DVD using System Locked Preinstallation where a generic product key is entered automatically and activation occurs if and only if a valid Dell BIOS is detected while Dell doesn't really care the key on the certificate of authenticity. They don't have any connected input of it and neither did Microsoft (who provided these low quality stickers causing the situation that you are to Dell).

  There are a few cases where this activation does not go with these media and you are made to be able to enter your COA key and activate it (which you can't). You will also get this problem if you try to clean install your OEM license using retail media like Digital River installation media.

  Assuming you've been reinstall Windows 7 using a .iso of Digital River, complete the installation by jumping the product key. You can then restore Dell SLP Product activation by using Activation backup and recovery and Dell program files:

  http://dellwindowsreinstallationguide.com/a-clean-install-of-Windows/Microsoft-product-activation/the-activation-backup-and-recovery-program-Windows-Vista-7-version/

  For more details, see own A Windows installation:

  http://dellwindowsreinstallationguide.com/a-clean-install-of-Windows/

• The Windows Firewall blocks network share on Windows 7

  I'm currently on Windows 7 Pro x 64.  I use the firewall of Windows of Microsoft Security Essentials and Microsoft.  No firewall AV or additional software is currently installed.  I regularly use the many Xbox 360 to stream media content of this machine on the home network.  In addition, I set up a homegroup to share resources such as printer and fileshares with other machines in the House.  It's all working perfectly until a few weeks ago.  No direct changes to installation other than updates of Microsoft, Adobe (Flash) and Oracle (Java).  Now, unless I turn off the Windows Firewall, my xboxs can not see the sharing machine, and no other network computers can print/share via homegroup.

  Currently, discovery network, file sharing of printers and streaming media are disabled and cannot be reactivated.  Check the radio buttons on the first two, then clicking to save does nothing.  I get sent to the network and sharing Center screen, but when I check again options for change advanced sharing settings, the options are returned to the people with reduced mobility.  Media streaming from this screen says it is on (even if this is not the case), but when I select the option to change this, it says it is disabled (which is correct).  By selecting the option to turn on media streaming continuously, does nothing.  I can click constantly with no change.

  I ran the Virus Scan free from Symantec online as long as complete system scan MSSE where each is an element, and in each case, the two elements have been removed (for the threat found by Symantec) NPE and (for the number found by MSSE) the MSSE tool.  I also run SFC/scannow and repaired the problem identified.  With two comprehensive analyses of each tool, I am sure that my machine is the threat and corruption free.

  In addition, I went through the list of services recommended to 'start' and 'automatic' which was published MANY times by MANY people.  For clarity, I have all these started and set to automatic:

  o computer browser
  o Client DHCP
  o customer DNS
  o network connections
  o knowledge of network locations
  o remote procedure call (RPC)
  o server
  o support TCP/IP Netbios
  o workstation

  With all these started, I can not follow the discovery of the network, the file and printer sharing, and streaming media options running.  I also made sure upnp started as well.

  I noticed, however, when I disabled the Windows Firewall, all options could be changed and stayed changed.  I added WMP to the firewall allow list and activated the firewall.  All options have yet.  In the firwall outgoing options are all set to allow, if incoming is currently refused saying "block all connections to programs that are not on the list of allowed programs."  It is the default state of Windows Firewall.

  Run without AV and a FW is NOT an option.  Specifically, these are tools MS and should not conflict with these simple network features.

  Help

  I was able to solve the problem after a kick in the right direction of another user of the forum.  The 'general' advice give cannot solve the problem, but they are a good starting point if nothing else.  Please see this thread for the difficulty that I used:

  http://social.technet.Microsoft.com/forums/en-us/w7itprosecurity/thread/2edd56f0-c00b-48f8-8812-6bd5b8ed33fa

• Error during the download of Windows 8 on Windows 7: "download failed. The download task has not completed. The new attempt at repair by block limit has been exceeded. The file is corrupted. »

  Currently, I have Windows 7 and had to buy Windows 8 for the school. I tried downloading it several times, but when she writes the check, it is said, "Download unsuccessful. The download task has not completed. The new attempt at repair by block limit has been exceeded. The file is corrupted. »

  I don't know what to do.

  Original title: download Windows 8 Windows 7

  Hello Travis,

  Thanks for posting your question on the Forums of community of Microsoft.

  To better understand the issue please help us with these questions.

  from which site you try to download Windows 8?

  b. what browser do you use to download?

  c. you try to download a full version or update?

  d. you run the upgrade wizard before trying to download the Windows 8?

  This problem usually occurs due to the installation of Web the contents of the folder in the system. So, now, I you suggest to rename or delete the installation folder to the following location and then try to download Windows 8:

  C:\Users\\AppData\Local\Microsoft\Web install

  See also the link mentioned to follow the correct steps before and during the installation of Windows 8 below:
  How to upgrade to Windows 8

  Note: I strongly recommend to back up all your important files and folders on an external storage device before performing any type of upgrade of the OS.

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.