Windows 7 compatibility with an old photo aio 922 printer printer

Similar Questions

• Windows 7 compatibility with the old game

  I used the resolution of compatibility issues in Control Panel to install my old pc game (cake mania 2) it installs and the game plays fine until I have shut down the game and try to reopen it. The convenience store said detected incompatible application.

  the programmer of the game say they're working on an upgrade to it. but do not know when it will be available.

  What don't get me, is why he runs very well the first time. I can even uninstall. reinstall it with the convenience store and my saved game is still there, and the game works perfectly until I got close.

  I am confused? Any ideas?

  empony

  Hi empony,

  When you are working on your computer and install a new program, the installation suddenly fails. Now, you're left with a partly installed program. You try to install the program again, but you're unsuccessful. Or, maybe you have problems trying to remove an old program because the installation files are damaged.

  Download and install the Windows Cleanup utility to uninstall the game completely from the computer, and then start with a new facility.

  http://support.Microsoft.com/kb/290301

  Once done with the uninstallation, you can install the game in Compatibility Mode and check if it works very well.

  Access the link below to install the game in Compatibility Mode.

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows
   
  Also, make sure that you temporarily disable any Antivirus software on the computer.

  Make sure that you enable the security software after the attempt.

  Varun j: MICROSOFT SUPPORT
  Visit our Microsoft answers feedback Forum
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Dell AIO 922 printer installed, windows 7 will not print to it

  connected my Dell AIO 922 printer via the USB port. Windows 7 found installed the rpinter and said that he installed the drivers. It appears in the Printers window and as installed devices. When I try to print it says "the system cannot find the file specified."

  I have the same problem and when I tried to download a driver for my Dell AIO 922 printer it says that this printer is not compatible with Windows 7.  Thus, it seems that we are on a printer.  This is the Web site from the list of compatible printers for Windows 7 Dell.  The AIO 922 figure on the list is not compatible.  Here is the website http://support.dell.com/support/topics/global.aspx/support/dsn/document?c=us&cs=19&docid=721171C9910C8085E040AE0AB7E1537B&l=en&s=dhs

  Also, I called Dell and they said that from now on, anyone who upgrades to Windows 7 with a printer Dell AIO 922 is out of luck and there is nothing they can do because they do not have a printer driver for Windows 7.

  I have, however, found on another site... I have not yet tried or even looked at in depth, but maybe this will help. Look at the last comment.
  http://social.technet.Microsoft.com/forums/en/w7itprohardware/thread/aad4c406-7f10-4879-9fca-ac5c7fdc9e1b

• AIO 922 printer connection problems. Does not print

  My AIO 922 printer won't print from my compuuter. I checked to see if it is a driver problem and the drivers are all installed and the firewall is ok not blocking, that's their a cleaner utility that may be used to solve this problem. It happened when I put Vista in the system. Error code maintains the communication is not available

  http://support.dell.com/support/downloads/driverslist.aspx?os=WLH&catid=-1&dateid=-1&impid=-1&osl=EN&typeid=-1&formatid=-1&servicetag=&SystemID=PRN_ALL_A922&hidos=WW1&hidlang=en&TabIndex=&scanSupported=True&scanConsent=False

  Link above has Vista 32 bit drivers for your printer model.

  Try to uninstall/reinstall the printer according to the instructions from Dell.

  http://support.Dell.com/support/topics/global.aspx/support/my_systems_info/manuals?c=us&l=en&s=Gen& ~ CK = anavml

  Above is the manual for it.

  See you soon.

  Mick Murphy - Microsoft partner

• Print issues with old photos scanned .jpeg prints too large & can't print in black & white

  I have a bunch of old photos & scanned articles of a scanner flat of maybe 10 years ago or not.   These are all .jpeg files.

  First of all, when I print on the Windows Live Photo Gallery, they are all print in color, no matter if I change my printer settings or if I go in settings in Windows Live Photo Gallery and deselect color.

  Secondly, not printing in black & white, they all print out extra large and therefore do not fit on an 8 1/2 x 11 pages.  All this elements analysed in years were roughly between 3 "x 5" until maybe 8 'x 10'. "  The fact is that they don't print as I would like.

  One last question, is that I have a newspaper article large .pdf format.  I printed it weeks and had no point of color above.  But I printed this on paper 11 "x 17".pdf file.  She printed on the entire page, but it was stopped at the bottom of each printed page, and I don't understand why.  Which certainly confused me.  Any suggestions?  My plan was to save the pages together to view the log what it was.  It's pages of the newspaper of 1886.

  Thank you

  Sue

  Hi Sue,

  We apologize for the delay in response.

  This problem occurs with the printer settings.

  I wish that you run the printer Troubleshooter and see if that fixes the problem.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Note: He made sure that a printer is connected to your computer, and it checks for common issues such as whether the printer has enough paper and toner to complete printing your document.

  If the problem persists, please refer to the article and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  If the problem persists, please answer with the number of the printer model to verify if there is no known issue.

  Thank you.

• Why my Windows 8 to run my old Kodak AiO printer successfully?

  It worked great for a few months then quit work partially...! I played with him and can 't get any where with him? my computer says that it ' s probably just too old and MS won ' t take it anymore... It's old but works very well over 6 years, when he was working... anyone have a solution for this? I'm all ears

  Hello

  Are you sure that your computer has not upgraded to version 8.1?

  Unless you have disabled the Windows updates, he has probably done automatically...

  This caused all my computers\printers stop working...

  If you still have 'COMPUTER' on your desktop, it's win 8...

  If you have a 'THISPC', is winning 8.1...

  You have two options... Try your CD... which is what I use for an old Lexmark printer...

  Or go to Kodak and see if they have something available for Win 8\8.1...

  With my Lexmark, wouldn't a normal uninstall\reinstall... He'll just say 'Already installed', or would try to install a 2nd printer...

  Here's what I had to do and may be necessary with a driver Win 8...

  (1) turn on and connect your printer... This must be done of this once so he could appear in devices and printers... Otherwise, all I get with my machine is the Lexmark fax, and therefore, you can't "remove" the printer.

  (2) once the printer is visible in devices and printers, physically pick up...

  (3) ' REMOVE' the printer Lexmark and Lexmark Fax (if you have one) in devices and printers.

  (4) to stop the print spooler in the Panel "Services"... Administration tools... Services

  (5) uninstall the software\drivers... Doing this, I had two safety messages popup Windows Firewall to printer communication 'allowing '... I selected "allow."

  I then found with two printers in the printer preferences...

  I started and not the area 'Shared' on the first message... Only one printer this time...

  (6) at the Lexmark uninstall, Reboot prompt.

  (7) after the reboot, STOP the spooler to print again.

  (8) reinstall software\drivers... I used XP SP3 and Vista, the various attempts, and both worked Compatibility Mode... Connect the printer to the top when you are prompted by Setup.

  (9) unhook the printer again and restart. Bidirectional support should be enabled, and the setting does not stick if the printer is hooked... You must restart to clear the air before the next step.

  (10) to restart and two-way supported. To do this, go to devices and printers and select "Printer properties", and then on the "PORTS" tab The box is near the bottom.

  (11) set the preferences of the printer you are using, if no and it's ready to go.

• Windows 7 compatibility with Pocket tanks game

  I can't play Pocket tanks Deluxe on Windows 7. Jumped to the top and freeze loading screen. When I maximize and minimize the game, the game menu showed and freeze. I can't do anything on this subject. I need help.

  Windows 7 compatibility is not in question, it would be the compatibility of the tanks of the pocket with all operating system you are running who would be involved.  :-)

  That said...  Other people have asked:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-gaming/cannot-play-Pocket-tanks-on-Windows-7/b85e11bc-B2B8-4718-b475-1593f1bd39f2

  You can contact their support:
  http://www.blitwise.com/support.html

• Dell Photo AIO 962 Printer does not print. Running a Dell Dimension 8400 CPU, with the Windows XP platform.

  Problem with printer does not print.

  I tried to uninstall and reinstall the printer drivers; Did not work.  Tried to start your Virtual Tech; He said that he could not solve the problem; and to communicate with you, dear friends!  I need help... I don't know what else to try.  Eddir

  I also need to recover the files of the program: dlbxcnv4.dll; dlbxmon.exe; and dlbxaix.exe.  because of the "runtime error".

   

  Hi eddir,.

  I suggest to reinstall the Dell printing software to see if the problem is resolved.

  Which should reinstall the DLL files you are looking for as well.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• My Dell Photo AIO 926 printer does not work with windows 8

  new Dell said there is no driver for my Dell Photo 926 printer is there a way to make it work?

  Hello

  You can try to disable the print spooler before uninstalling the software.

  After restarting your computer, turn it off before you reinstall the software...

  This adds the steps mentioned previously...

• Windows 7 - can't delete old photos, music and video files in Windows Media Player

  using computer Windows 7 and current Windows Media Player - given to me after the mine crashed and burned.  Went through all the settings (have everything set up right after that) but I have files Photos, music and videos that belonged to the person who owned it before.  He left the area and while I don't want to show files (what they are - don't know, don't care) I don't want to get out of here.  MASSIVE amount of files.  No matter what I seem to do they will not erase.  I have tried everything I can think of short of wiping the thing and starting over.  Help! Suggestions - idea short of dumping in the trash (setting fire to him or by running a truck, ect...) to clean this thing would be GREATLY appreciated...

  Mike

  The best thing you can do with a used computer that gave you is to access the recovery partition and reinstall the default unit. Most of the laptops brand will have a reserved recovery Partition built into the main HARD disk that can be used to restore the computer to right-of-factory default. Usually activated by touching a certain key during the boot process or by using the software provided by the computer manufacturer.

  Dell uses Ctrl + F11 at the Dell logo screen to initiate the restore process. HP uses a program in Windows 7, called Manager of recovery. Your system may vary depending on the manufacturer.

  Don't forget to get all documents (including images) and any other personal information that you want to keep. Several key software product can be recovered with the Belarc Advisor before the restore, but you will need to locate the diskettes (CD/DVD, ISOs or exe) installation for each piece of software.

• Windows 8 compatibility with Vostro 420 BIOS v1.3.0

  Vostro 420
  Windows 7 64-Bi
  BIOS 1.3.0 (last update, version 2010)

  Hello:

  The Vostro 420 yourself running Windows 8 when it comes out next month?

  And the Vostro 420 DEP support bios? (I read Windows 8 needs a bios with the support of the DEP)

  Thank you

  Hello

  The Vostro 420 has not been tested by Dell with Windows 8. However if you use Windows 7 on your system it will avoid any compatibility issues.
  You can also check if hardware DEP is available on your system by performing the following steps.

  How to verify that hardware DEP is working in Windows:

  1. Click Start, click run, type cmd in the Open box, and then click OK.
  2. At the command prompt, type the following command and press ENTER:
     WMIC OS Get DataExecutionPrevention_Available
  3. If the output is "TRUE," hardware DEP is available.

  After the official launch of Windows 8, pilots cannot be available on the Dell support site. However, you can always check the site of the manufacturer for the appropriate drivers. You can also consult the following link for more information on the upgrade of Windows 8. http://Dell.to/SyrDsU

• Windows 10 compatibility with applications developed in LabView

  We have deployed several applications developed in LabView that are running OK under Win7 and Win8.x.

  Are there problems of known incompatibility with 10 Windows and applications created with "LV2012 SP1 that read data from cards NiDaq". We should warn our clients to not upgrade their operating system or should we ask them to install a specific version of the runtime OR or NiDaq libraries?

  Best,

  Gerard

  Hatefk wrote:

  I have one is not concerned about the development environment as much as I'm worried about customers who use our products.

  Well the development and EXE run the same runtime for code execution, and the same things like DAQmx drivers.  If you upgrade to Windows 10, and something goofy happens to the TCP stack, you call up NOR help, but they say the solution is to pass some version of LabVIEW is supported in Windows 10.  The probability of this happening is slim, but more strange things happened.

• Windows 7 compatibility with older programs

  Only older games of 64-bit Windows 7 run as Links 2003 (Microsoft Golf)?

  Most games should work correctly. If they are not it is possible to activate the compatibility mode (right click-> properties-> compatible) for a specific game to run properly. Microsoft Student Partner

• CH376A: Windows 10 compatibility with HP Deskjet 3050 J610a

  I'm booked for the update of Windows 10 for my laptop the 29th of this month and want to know if my all in one printer will work with this update or how to get the HP fix or update and my printer cannot work with Windows 10. My laptop is a Compaq Presario CQ60 and is running Windows 7-32 bit. I need to know if there won't be an upgrade for my printer before too long if possible if I cancel the booking of Windows 10 before the 28th or it automatically updates my system for Windows 10 29.

  As soon as the final version of Windows 10 is released, see the HP web site for updated drivers.

• Windows 7 compatibility with the Epson R280 driver

  When I connect my USB Eposn R280 Printer to my Win 7, 64-bit machine it does not correctly recognize and will not install the correct driver.

  When I manually select the printer driver or download it manually from Epson, it will not load and run properly.  I get a message indicating that there is an error in loading the driver.  He alos gives the possibility for a driver Epson ESC/P Standard 2.  This one, it will download successfully.

  Someone familiar with why it will allow this driver must be installed, but not the specific product driver?

  Where did you got the drivers?

  Have you tried this site - http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?oid=89901&prodoid=63069504&infoType=Downloads&platform=Windows

  Get the driver 64-bit if you have a 64 bit OS

  Have you tried to log on as an administrator to install it, or are you a right click on the setup/install file and "run as Administrator"? Try to log on as an administrator if you don't have it already.

  If this isn't the case, please post back.