Windows 7 crashes after the last batch of updates

Similar Questions

• Windows 7 64 x computer with up-to-date Norton 360 crashes after the last update__ critic

  Windows 7 64 x computer with up-to-date Norton 360 crashes after the last critical update. I had to go back to a recovery point before the last installed update. I had Norton 360 for nine with no previous Windows Update problems

  It seems to work after a reboot and a new attempt to update norton.   First, it froze.   I connect this because I heard that several win 7 64B machines at work had to be restored on 1/12 after a bad update.  I don't know if they also had norton.

• Windows 8 crashed during the last update, now wants to save and may not do.

  Windows 8 crashed during the last update. Stuck at 30% for more than 4 hours before I finally pressed the power button to restart the system. Windows 8 Pro with Media Center now says system build 9200 at the bottom right of the screen.

  Whenever I try to activate Windows 8, it cannot connect. When you use the command prompt Windows + R and slui 3 with my purchased serial number I get Code 0 x 80070424. Description: The specified service does not exist as an installed service.

  Hello

  This error can appear if your firewall settings prevent Windows to complete the online activation process. To resolve this problem, you can activate Windows by phone instead.

  1. Enter in the right edge of the screen and then click on Search.
     (If you use a mouse, point to the upper right of the screen, move the pointer of the mouse down and then click find.)
  2. Type SLUI 04 in the search box, type or click on applicationsand then tap or click SLUI 04.
  3. Follow the instructions on the screen.

  Hope this helps

• Constant crash after the last update!

  History is constantly crashing after the last update, I've noticed the logo has changed. If I use a different application then when I click on new in the history in closes unexpectedly. Any ideas? can I roll back? What to know about me? Thanks in advance,

  Mac Pro running 10.9.1

  32 GB of ram

  Intel Core i7

  Member of creative cloud

  Update: this issue is resolved with the latest version of Adobe AIR. Please download and install the most recent http://get.adobe.com/air

• Random crashes after that last round of updates (23/02/2010)

  I was recently meet the system hard locking after the last round of updates.

  I'm running on a Windows 7 Ultimate 64-bit platform.  Currently do not have access to the crash dump information because I'm not nearly this PC at the moment.  Someone else encountered similar problems?

  Hi Jamesarm,

  Note the updates recently installed on the computer.

  1. Click Start and select Control Panel.

  2. click on Windows Update, and then click view update history.

  Click on the link: see the Windows updates are installed: http://windows.microsoft.com/en-US/windows7/See-which-Windows-updates-are-installed

  Take note of the KB articles.

  To troubleshoot further, we need to get the error message; You can get the following error message:

  1. open Event Viewer by clicking Start, clicking Control Panel, clicking system and security, click Administrative Tools, and then double-click Event Viewer. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. click on a journal of the events in the left pane.
  3. double-click on an event to view the details of the event.

  Now, make a note of the full error code or an error message.

  Read the article: What are the information contained in the logs of the event (Event Viewer)?: http://windows.microsoft.com/en-US/windows7/What-information-appears-in-event-logs-Event-Viewer

  Note the error message or an exact error code and provide the same.

  Thank you, and in what concerns:
  Swathi B - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• users on android like me are reporting that Firefox crashes after the last update 35.01

  BONES of Firefox crashes on android, after the last update 35.0.1 can you fix with a update guys please I use Hudl 2

  Yes, sorry about that. Now, that should fix, we have released an update. Your device was basically downloading a generation for devices Android ARMv7 based instead of the Intel x 86 version.

• Windows blocks all a few minutes after the last round of updates and latest installation of IE

  I ran the last round of updates of security and the upgrade of IE over the weekend. Now by PC crashes every 4 or 5 minutes. All I can do is to draw power and restart. the problem seems to happen more when messenger, IE, or firefox are used. Before I have to roll back (me is not very far away because I will need to perform these updates at somepoint) y at - it a common cause. I use a Dell Inspiron 1525 laptop

  First try unistalling IE8 and change your update settings:

  Click Start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  See you soon

  Mick Murphy - Microsoft partner

• After the last El Capitan, update cannot move any icon on my desktop. Why?

  After the last update of El Capitan, I can't move the icons on my desktop. Why?

  EDDD by restarting the computer not help?

• Problems with the screen resolution, Cloud based software and Photoshop after the last round of updates Windows 8.1.

  Original title: screen resolution problems.

  Since the last series of Windows 8.1 update the resolution of my monitors has been changed for the worse. I use an AOC 2367 M (resolution 1920 x 1080) as my first monitor and a 42 inch Sony Bravia (resolution 1920 x 1080) as my 2nd monitor. The changes are more noticeable on the Sony Bravia and any adjustment I make to the resolution only make worse it.

  I also have problems with some software clouds as I load using citrix and when I try and navigate once opened software, I can't because the pointer selects a point about 50 mm on the side of the where he is hovering. In fact it is very difficult to open and close as anything and I resorted to the laptop to get concrete results.

  Photoshop now also comes up with a message when I open it up to inform me that the monitor profile seems to be defective.

  Any suggestions would be helpful as I thought initially an another upgrade must follow to correct the ills of windows 8, but appears not to have happened.

  Hi Joseph,.

  Thanks for the reply.

  Method 1:

  I suggest you to download and install all Windows updates available including optional updates. You can also install the latest device drivers for all devices including display drivers and monitor drivers on the manufacturer's Web site.

  http://eSupport.Sony.com/Perl/select-System.pl

  http://www.aocmonitorap.com/root/ANZ/download_driver.php

  Method 2:
  Adobe Photoshop CC version 14 is compatible with Windows 8.1. See Windows Compatibility Center for more information. To solve the problem with Photoshop CC, I suggest you try the procedure described in the article and see if it helps.

  Cloud applications help creative /CC crash immediately after launch
  http://helpx.Adobe.com/Photoshop/KB/CC-applications-crash-immediately-launch.html

  If the problem persists, I suggest you to contact the Support from Adobe.

  http://helpx.Adobe.com/contact.html

  To solve the problem from software hosted accounts, you may need to contact the Support to count.

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• Satellite Pro A210 PSAFHE - Windows 7 - crashes after the sleep/hibernation

  I have a PSAFHE Satellite Pro A210 running dual boot Windows XP/7
  With the help of Windows 7 - 32 or 64 - system always crashes after sleep/hibernate mode.
  This never happens with XP that sleeps and hibernates OK...
  There is no driver for this laptop on site http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=EU
  I like system 7 and use it on my other computers but without sleep/hibernate, I go back to XP.

  Hello

  > There is no driver for this laptop on site http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=EU

  Sorry, mate, but you're wrong.
  All drivers for Win 7 for Satellite Pro A210 are available on the European driver of Toshiba page that I recommend you check out once again

  Given that this question does not appear using Win XP, I can say with certainty that this has nothing to do with the material, but it s a software related issue
  I recommend updating the graphics card driver

  In addition, there is a new BIOS for Satellite Pro A210 PSAFHE it s v2.0
  Check if you are using the latest version

• Lightroom crashes after the last update

  Hi all

  I am a photographer and a user of Lightroom on a retina 2015 Macbook intel core i7 with NVIDIA GeForce GT 750 M 2048 MB. After the two latest updates of the software, Lightroom starts to crash very often and it is impossible to work. Could someone help me? Thank you

  Lightroom version: CC 2015.7

  Licenza: Creative cloud

  Operating system: Mac OS 10

  Version: 10.11

  Architettura dell' application: x 64

  LOGiCO processore Conteggio: 8

  Velocità processore: 2.5 GHz

  Memoria integrata: 16.384,0 MB

  Memoria reale available in Lightroom: 16.384,0 MB

  Memoria fisica usata Lightroom: 1.748,7 MB (10.6%)

  Memoria virtuale usata Lightroom: 3.254,5 MB

  Cache memory size: 826,7 MB

  Number di da massimo injected wire Camera Raw: 8

  Ottimizzazione SIMD Camera Raw: SSE2, AVX, AVX2

  Monitor: 2880 x 1800

  Information processore gráfico:

  NVIDIA GeForce GT 750 M OpenGL engine

  Check the supported OpenGL: past

  Provider: NVIDIA Corporation

  Version: 4.1 NVIDIA - 10.10.13 310.42.25f01

  Rendering engine: NVIDIA GeForce GT 750 M OpenGL engine

  LanguageVersion: 4.10

  Lightroom crashes whenever I use it, develop one or more times during the use of the Panel.

  The graphics accelerator is disabled. I made the paper and close the session in the creative cloud, I have uninstalled and reinstalled the program. Yesterday, I optimized the catalog and removed some of the old backup of it and at the moment I have is more known accidents. But I'm not pleased with this development of the CC.

• Encoder crashes after the last update

  Hello

  I've updated my CC to the latest version today. I use the latest edition of the Mavericks on a MacBook Pro system.

  After the update the encoder crashes whenever I want to start rendering (I am pressing the green play button)

  I reinstalled the encoder and restarted the computer. Does not work.

  It gives me an error message saying: it is pas.../.../.../Presets

  A can I get some help please?

  Thank you

  Rafal

  Just heard on a solution. Please navigate to the file in the error message (it must be /users/%username%/Documents/Adobe/Adobe Media Encoder/8.0/Presets) and temporarily move presets in this folder to a new location. Then, delete the presets folder. Launch the SOUL to let it recreate the folder. Close the SOUL. Now, you can replace the predefined settings and SOUL should work as expected.

  Please let me know if this does not work.

• Autonomous Lr6 crashing after the last update?

  Updated standalone Lr6 and now it freezes / crashes with the first click anywhere! Can anyone help? Will there be a clash in the upgrade between CC and autonomous?

  Please back up your Lightroom Catalog by manually copying from pictures/Lightroom on desktop

  Reset then Lughtroom preferences. Reference http://lightroom-blog.com/2015/05/23/resetting-preferences-in-lightroom-cc6/

  ~ Assani

• Data store 6.0 VMWare not recognized after the last batch of hotfixes installed on HP custom image

  Hello guys,.

  Maybe you can help me:

  I installed VMWare 6.0 on a server HP ML350 G9 with image OEM offered custom HP, ESXi - 6.0.0 - 2494585-HP - 600.9.3.30.2.

  This works perfectly.

  Now I am trying to apply the latest available official patch (ESXi600-201507001), but it seems to kill some important VIB

  VIBs installed: VMware_bootbank_esx - base_6.0.0 - 0.11.2809209, VMware_bootbank_lsu-lsi-lsi-mr3-plugin_1.0.0-2vmw.600.0.11.2809209, VMware_bootbank_lsu-lsi-megaraid-sas-plugin_1.0.0-2vmw.600.0.11.2809209, VMware_bootbank_misc - drivers_6.0.0 - 0.11.2809209, VMware_bootbank_sata - ahci_3.0 - 21vmw.600.0.11.2809209, VMware_bootbank_scsi - hpsa_6.0.0.44 - 4vmw.600.0.0.2494585, VMware_bootbank_scsi - mpt2sas_19.00.00.00 - 1vmw.600.0.0.2494585

  VIBs deleted: Hewlett-Packard_bootbank_scsi - hpsa_5.5.0.106-1OEM.550.0.0.1331820, LSI_bootbank_scsi - mpt2sas_15.10.06.00.1vmw - 1OEM.550.0.0.1198610, VMware_bootbank_esx - base_6.0.0 - 0.0.2494585, VMware_bootbank_lsu-lsi-lsi-mr3-plugin_1.0.0-1vmw.600.0.0.2494585, VMware_bootbank_lsu-lsi-megaraid-sas-plugin_1.0.0-1vmw.600.0.0.2494585, VMware_bootbank_misc - drivers_6.0.0 - 0.0.2494585, VMware_bootbank_sata - ahci_3.0 - 21vmw.600.0.0.2494585

  The next time I reboot the server, the data store is not available, no more and I have to do a restore. I suspect that the new bootbank_hpsa is the origin of the problem.

  So, how to install the latest patch without losing the data store connectivity?

  Thank you

  What should work, is to download the latest driver hpsa in the/hpq/latest/esxi-600-devicedrivers Indexand install it just after the connection of the host (prior to restart it). The .zip file contains a bundle off line as well as the .vib file.

  André

• Stops automatically after the last El Cap update

  Hello

  I use a middle Tower Mac Pro 2012 (Nehalem). 3.2 Ghz Quad core, 1 TB hdd, 8 GB ram DDR3, ATI graphic card 1 GB GDDR3 ram

  Just updated to the latest version of El Capitan (10.11.5, I think). Directly after the update has been completed and the obligatory restarted, the splash screen would come to the top. The progress bar should get about half way (probably 15 seconds) and then the machine just turns off. When you turn on it starts where it stopped, then 15 seconds later it turns off again.

  I tried to get in safe mode - turns off until something happens

  I tried the (cmd, opt, p, r) and it should restart as expected but then start from the beginning progress bar. As before judgment.

  AND if this can help: just before rebooting, I got an unknown error while trying to open iTunes (which was working fine the day before) - he asked me to uninstall and reinstall iTunes. The error had a number, but I don't remember it.

  Any ideas?

  -Try to reset memory NVRAM/PRAM and SMC

  MacIntel: Reset of the controller (SMC) system management

  https://support.Apple.com/en-us/HT201295

  PRAM and NVRAM

  https://support.Apple.com/en-us/HT204063

  -Try to start safe mode

  OS x: what is Safe Boot, Safe Mode?

  https://support.Apple.com/en-us/HT201262

  You said "I tried down mode switches secure until something happens" try to press and hold the Power button until the is off Mac and then try safe mode

  -Start to recovery and repair the startup disk

  OS X: on OS X Recovery - Apple Support

  https://support.Apple.com/en-us/HT201314

  -If it is repairable reinstall the OSX

  How to reinstall OS X on your Mac - Apple Support

  https://support.Apple.com/en-us/HT204904

  -If you do not have a backup using disk utility to restore the internal drive to an external drive, so that you can try to recover the data.

  Format the boot disk and then do a fresh install of Mac OS x