Data store 6.0 VMWare not recognized after the last batch of hotfixes installed on HP custom image

Similar Questions

• DVD player not recognized after the upgrade to windows 8

  I write this to document some odd behavior, that I lived after the upgrade to Windows 8 in the hope that it might save some grief for others.  Of course, if someone could explain why this problem occurs, I'd be very interested/grateful for an answer.

  I recently updated my computer from Vista Ultimate to Windows 8.  I did a clean install of Windows 8, because there is nothing special about the machine I wanted to preserve.  In all cases, the upgrade went without a hitch and I was soon back up with Windows 8 as my OS (I really like, btw).

  The only oddity I noticed after the upgrade is that my DVD drive was not recognized by the operating system.  Remember, this is the same DVD player that was used to install the OS, so I found it rather peculiar.  After a bit of lost time, try software solutions theoretical I started to play with the equipment.

  My motherboard is an ASUS M3A78-EM.  My hard drive is attached to the SATA1 port and my DVD player is plugged into the SATA2 port.  I removed the DVD drive from SATA2, plugged into SATA3, restart Windows 8 (from HDD on SATA1) and Windows 8 now recognizes the drive!

  I thought it was really weird, so I stop, put the DVD on SATA2 drive, rebooted, and the drive was no longer available in Windows 8.

  OK, so I thought that maybe the SATA2 channel was bad (even if he had worked at the Windows 8 DVD installation, just an hour or two before), so I put my HDD on SATA2 and the DVD drive on SATA1.  After doing this, Windows 8 start very well (so there is nothing wrong with SATA2), and it recognizes the DVD on the SATA1 drive.

  OK, so I did that for a while, and virtually all combinations I tried worked as long as the DVD player is not plugged in SATA2.

  I cannot live with that, but thought it was really strange.  Also, I note that the old operating system (Vista) was acknowledging the same DVD player while it was plugged on SATA2.  This leads me to believe that the problem has something to do with Windows 8, but I can't imagine what could be the cause.

  Thanks dude.  After you create this registry key/value and restart Windows 8 was able to finally see my DVD drive on SATA2.  =)

• iMac does not start after the last security update

  Hello

  After the last update my iMac (late 2009, El Capitan) does not start.

  The iMac starts he accepts my user and password entry, the loading bar stops at 80% and then nothing happens... after I turn off the iMac. Repeating this procedure change nothing.

  Does anyone have any advice for me?

  THX

  INTELLECTUAL PROPERTY

  a solution that helped me:

  Re: security update causes damaged Apps

• Time Capsule not recognized after the replaced logic board.

  Time capsule is not recognized

  I too am in the same "boat" as 'bruf' and 'Pitbullover' my Mac Book Pro had a card failure logic as well as graphics - warranty - replaced but now the MBP does not recognize Time Capsule.  Directly linked to the time via an adapter for MBP port capsule.  It was working OK before the Mac went to repair.

  I followed the great suggestions of LaPastenague (thanks for all the time and expertise you provide other users of Apple).  Tried the factory reset button, but no result. (By the way there is always a flashing amber light on the TC - is this usual?)

  Checked the Finder - showed the distance disc - but no mention of a time Capsule.

  The TC is never used as a return to the top.  I gave up trying to use it as a router, so there may be some vestige of the conflict still in the installation somewhere.

  I will follow this thread with interest in the hope that the wonderful 'gurus' out there can suggest a solution.

  With satisfaction!

  The TC is never used as a return to the top.  I gave up trying to use it as a router, so there may be some vestige of the conflict still in the installation somewhere.

  Even if it is not used as a router, it is usually easier to him have plugged into your router main and fulfilled.

  What model is the TC?

  This modem do you have? Brand and model please.

  the time Capsule.  Directly linked to the time via an adapter for MBP port capsule.

  Exact details... which adapter... has this crush on ethernet?

  Or Ethernet USB...?

  It could also be a USB wireless... but probably not.

  Have you tried the manual configuration method?

  https://discussions.Apple.com/message/29612657?ac_cid=sa123456#29612657

• USB-6009 not recognized after the blue screen of death

  I have two devices USB-6009, used with NOR-DAQmx and Labview to make some analogue simple analogue input and output.  The USB box - two 6009 were previously works very well on this PC.  Recently, I got a blue screen of death, associated with a different USB device to (non - OR) connected to the PC.  I not save the information of the blue screen of death.  When I restarted the computer, the USB-6009 devices were no longer recognized by Labview / MAX.  The Green LED on the USB - 6009 s do not come.  The USB - 6009 s appear in the Device Manager of Windows with a yellow exclamation point ("Windows cannot load the driver for this hardware device").  If I connect the USB-6009 case to another PC, MAX recognizes them on this PC, and I get the usual flashing green LED.  If I connect another USB-6009 (never connected to this PC), I get a green LED solid, and, says Windows cannot load the driver.

  I am running Vista, Labview 8.5 and NOR-DAQmx 8.9.  I rebooted 5 - 6 times, I tried disabling and the reactivation of the USB-6009 by windows Device Manager, I tried the options "update driver" in Device Manager.  Any advice on how else to solve it?  Thank you!

  The driver update and turn do nothing to the main driver - DAQmx. Reinstall or repair that.

• Constant pop up of the notice that says "USB device not recognized" after the device has been disconnected

  Trying to connect a Sony W760 to PC Suite and receive the notification as the "peripheral USB is not recognized. Clicked on the indications of alert and monitoring. The device is not installed. Computer restarted, but the alert keeps popping up every 10 to 15 seconds. How to stop?

  Found the answer to the problems by accident. I had turned off my Avast, during the installation of the programs, but did not know that the computer came with Norton already active. Nothing on the screen noted that it is there. The Sony site, under the heading troubleshooting USB and I saw it mentioned to disable McAfee. Became curious and went to control panel > programs and features looking around and found the Norton. Uninstalled, downloaded programs from Sony, install and everything works fine. Just a reminder, check all your security system before installing programs.

• Samsung Slate PC record not in after the last update

  Hello

  I have a Samsung Slate 700 t PC running windows 7.

  Since the November update, I can not connect.  The screen flashes just before he gets to the login screen.

  I understand that this could be a problem with KB3097877.

  I tried to start in safe mode and safe mode with command prompt. When it gets to the login screen, I touch the icon of connection and loading, it waits a bit then returns to the login screen.

  I did a little research and press f8 for advanced boot menu it was suggested.  Except that it's a touchscreen pc and the wireless keyboard works until I get into windows.

  I've reached the limit of my minimal knowledge and I'm stuck.  Any help would be accepted with gratitude.

  Thank you

  Mel

  Hello

  Yes, you just think the root cause of your issue might be KB3097877. However, your efforts to resolve the issue is highly appreciated.

  If you are unable to start the computer in safe mode, then I suggest you to consult the below thread and see if it helps you to solve the problem.

  Screen flickering and problems log on Windows 7 after installation of updates

  If the problem persists, I suggest that you want to run auto repair with installation media and see if it helps you repair system files or not. For the execution of the task, I suggest you to try the steps below and see if it helps.

  Method 1

  When you use the recovery environment (Windows RE) to troubleshoot startup issues, first try the Startup Repair option in the System Recovery Options dialog box. If this does not resolve the problem, or if you have additional problems manually, use the Bootrec.exe tool.

  Because you cannot start the computer, you may need to create a bootable Windows installation media, and then do an auto repair, and if this does not help then you try to restore your computer to the previous date.

  Note: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  If you are using Windows 7 then the link provided below might help you to download and create installation media.

  Download Windows 7 Disk Images (ISO files)

  Method 2

  If the problem persists, try to rebuild the BCD by using the Bootrec.exe tool. To run the Bootrec.exe tool, you must start the recovery Windows (WINRE) environment . To do this, follow these steps:

  1. Place the Windows 7 installation disc in the disc drive, and then start the computer.
  2. Press a key when you are prompted. Select a language, a time, a currency, a keyboard or an input method, and then click Next.
  3. Click repair your computer.
  4. Click the operating system you want to repair, and then click Next.
  5. In the System Recovery Options dialog box, click command prompt.
  6. Type Bootrec.exe, and then press ENTER.

  See the following link for more information:

  How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows

  http://support.Microsoft.com/kb/927392

  Method 3

  If after performing the above steps, you are able to start the computer and access the desktop then try to Uninstall KB3097877 update if it is installed, and then reinstall it.

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Kind regards

• Mice are not appearing after the last update of Windows 8

  After update to the last version of windows 8, my mouse does not work on my computer no more. I use a "HAMA Optical Mouse AM-5000" and a 64-bit Windows 8 operating system to my office. Before the update, everything worked very well, but a little at the time (perhaps a week?) there was a software update that began when I shut down my computer for the night and after, my mouse wouldn't just appear. Then I want to restore my computer to before the update and everything would work fine. It happened maybe 3 times in the past week. Today, however, every time that I restored it to an earlier date, the mouse still does not. I tried the following things:

  Deactivation and reactivation of the mouse
  Uninstall the drivers and search for updates
  Try different mouse (2 USB, 1 green connector)
  Using the troubleshooting in the Device Manager tool, a fine of the question
  Non of them did it no matter what and I wonder if I'm the only one to receive the problem. and what I can do about it. Trying to navigate in windows using only the keyboard becomes very annoying XD.
  Thanks for the reply of Kevin,

  In the (Control Panel > system and security > Windows Update > View Update History) all there is "you have not tried to install the updates for this computer. There "18 updated important and 5 available optional updates to install, but I think that those who might be updates that have been the cause.

  In the (Control Panel > programs > programs and features > Installed Updates) there are a bunch of installed updates. The most recent is "Word Viewer 2003 Service Pack 3 (SP3): WDVIEWSP3" which has been installed on 26/09/13 and "update for Microsoft Windows (KB2889543)" which has been installed on 25/09/13.

  I downloaded the latest drivers from the mouse on the site that you have linked and no change. By chipset are you referring to the processor (Intel i7)?

• Some pages are not loading after the last update v39.

  After the updated 07/07, pages many (but not all) which worked well previously are now time and need to be recharged to load (for the first time, somehow). Started by clearing cache, then checked for malware and ended by reinstalling Firefox. I copied my profile, rather than starting from scratch with extensions (about 5 only execution).

  All of these problematic pages open correctly in Internet Explorer.

  Any ideas? Thank you very much.

  As test, please disable McAfee. It caused problems.

• Bookmarks bar is not there after the last update!

  Bookmarks toolbar no longer works. I can still access my favorites, just the toolbar will not appear even after checking and unchecking "view bookmarks toolbar".

  Uros says

  Bookmarks toolbar no longer works. I can still access my favorites, just the toolbar will not appear even after checking and unchecking "view bookmarks toolbar".

  OK I thought about it. My browser is a mode full screen to the value by default after the update, and for some reason bookmarks toolbar does not appear mode full screen. So when is out of full-screen, the toolbar appeared.

• Bridge does not open after the last update CC. (June 2016)

  I posted this on another discussion and then noticed that it was several years old.

  Bridge icon appears and then immediately crashes with problem report "Adobe Bridge CC quit unexpectedly".

  I started having this problem after upgrading to the latest creative cloud today. Under OS X El Capitan iMac mid-2010.

  I tried uninstalling and reinstalling the bridge, but that had no effect. I had some problems after the upgrade on my computer Windows 7 yesterday, but it wasn't one of them.

  Hi all

  We published a new version of Adobe Bridge (CC 2015) on July 19, 2016. This update is available via the Adobe Creative Cloud application.

  We addressed some crash bridge issues experienced on the launch of the application. Please try the new version and are looking for the crash problems you encountered.

  If you are not able to locate the bridge (CC 2015) on the creative cloud application, you must update the creative cloud application.

  Thank you

  Deepak Gupta

• BDP 3100 Youtube freeze and Yupp TV does not work after the last firmware update

  Hello

  My Youtube app on the Bluray Sony BDP - S3100 drive freezes when I play any video. It says LOADING... and plays the video completely. But the Player hangs and I have to be able to market. This started happening since yesterday is to say 26/06/2013.

  The other problem is with the YUPP TV App.

  After my latest firmware upgrade June 4, 2013 live channels on the YUPP TV app does not work peoperly. It says loading and will market every 5 to 10 seconds. On demand videos are very good. This began to happen immediately after the upgrade on June 4, 2013 (M14. R.0136). but after that, there was a more updated firmware that says that connectivity issues fixed on 08/06/2013 (M14 Version. R.0138). I've updated on my player. Yupp TV questions are still there. YouTube has been fine since then, but then the Youtube above issue started happening since yesterday and I have reported to the Youtube community as well.

  Could you fix Yupp TV, I'm sure that updating the firmware.  Also please check if Yout tube is with the firmware...

  Let me know if you need additional information.

  Thank you
  RAM

  At least I'm not alone, until a few days earlier, alls well, now, I have the same problem, so that makes three of us.  New default factory setting does not so I think a firmware issue, all other channels & functions outside of youtube look... very annoying

• Develop Module does not work after the last 5.5 update.

  I uninstalled and installed from the direct link.

  Cleaned up and optimized the catalog, etc.

  Images are visible in the library or develop module, but if I try to start editing - no changes are visible, unless I go to the library and to develop.

  If I click on ' before/after' the empty screen.

  Help! It is a problem of important works for me!

  

  We set!

  Called Adobe and after some poking around it turns out be a color profile for the monitor!

  If happy its back and its operation

  Now to restore catalogs...

• CD Rom drive not recognized of the games which are already installed.

  Hi, I have a similar problem.
  But let's start at the beginning.

  About 5 months ago, I bought a game. It did not work properly. After a month without playing, I wanted to have fun again. And here it starts.
  I clicked on the game icon and the message "' Please insert the correct dvd - rom, press OK and restart the application".» And that's all. So I tried to run every possible way, my two dvd-drivers, then I uninstalled and installed again first on one, on the second disc, but nothing new.
  The thing is, that she even download necessary patches and computer, he sees (in my computer). But every time I want to play appears this irritating message.
  Pilots celan are the disc has not yet a little dust on it.
  On my brother's computer, it works perfectly.
  My computer system is Vista, but I don't think that this has something to do with it.

  Please, please help.

  Hi Neilameane,

  Thanks for posting your questions to answers.microsoft.com

  Just to let you know, I moved your post to

  http://social.answers.Microsoft.com/forums/en-us/vistagaming/threads?page=3

  to place it as a new question on the community forum.  When has already been answered in a previous question, less than MVP and moderators will seek to these posts, so when something new happens on these positions they get very often over looked.  Sometimes just to reference the URL and post a new question will help to get good support on the question line.

  Once again, 'Thank you' for the display of answers.microsoft.com

  Article which was featured on the forum on this link;  Reset you the upper and lower filters?  A big question really to ask, does your system recognizes the other DVD/Cd?

  Here's how to reset the upper and lower filters for the DVD;

  Be sure to have a good restore point before you do the steps described in this article.

  You can follow the steps below or click on this link to go directly to the Knowledge Base article and run the FIX for this issue.

  http://support.Microsoft.com/default.aspx/KB/314060

  Fix it myself

  Important this section, method, or task contains steps that tell you how modi...
  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  322756 (http://support.microsoft.com/kb/322756/) how to back up and restore the registry in Windows
  
  This problem is due to two Windows that have been corrupted registry entries. To resolve this problem, you must use the registry editor to delete the corrupted registry entries. To use this method, you must be running Windows as an administrator. If you need help, check that you are an administrator, visit the Microsoft Web site at the following address:
  http://support.Microsoft.com/GP/Admin (http://support.microsoft.com/gp/admin)
  Back to top

  Microsoft Windows Vista

  1. Click Start
     and then click all programs.
  2. Click Accessories, and then click run.
  3. Type regedit and then click OK.
     If you are prompted for an administrator password or a confirmation, type the password, or click allow.
  4. In the navigation pane, find and then click the following registry subkey:
     HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
  5. In the right pane, click UpperFilters.
  
  Note You can also see an UpperFilters.bak registry entry. You don't have to delete this entry. Click UpperFilters . If you do not see the UpperFilters registry entry, you may still have to delete the LowerFilters registry entry. To do this, go to step 8.
• On the Edit menu, click delete.
• When you are prompted to confirm the deletion, click Yes.
• In the right pane, click LowerFilters.

  Note If you do not see the LowerFilters registry entry, unfortunately this content can't help you. Go to the section "next steps" to learn how you can find more solutions or more help on the Microsoft Web site.

• On the Edit menu, click delete.
• When you are prompted to confirm the deletion, click Yes.
• Exit Registry Editor.
• Restart the computer

Please keep us informed if, in addition, help is needed.

Debbie
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.

• 6 Lightroom does not start after the last update of victory 10

  Hello

  After installing the latest updates of victory 10 yesterday my 6 Lightroom won't start no more. I tried to reinstall, fact the renaming of files SLCache and SLStore, past all antivirus and firewall off the coast. No results on the start screen, I always get a pop up saying that LR does not work properly because of the problem and that patients be informed as soon as there is a solution. It stops...

  Can someone help with this problem?

  Hi jensk

  Name the module fehlerhaften: ig7icd64.dll

  Update your graphics card driver.

  ig7icd64.dll crashes due to a deprecated module / driver for your graphics card

  Concerning

  Assani