Windows 7 - default gateway not saved after reboot

Similar Questions

• The mouse settings not saved after reboot/restart

  I'm changing the speed at which my mouse pointer moves on the screen.  I'm doing a 'demand' the change, and then click on 'ok '.   The point of the mouse moves faster in the game.  Then after reboot/restart the computer, the mouse setting is default slower movement speed.   The changes are not saved after reboot.   What keeps the change of speed of movement of the mouse to be saved?

  Mr. Brian,

  Please, try the following steps.  This should allow you to keep all the settings in the SetPoint software at the same time to solve your problem.

  1. click on the Start ORB, type msconfig in the Search box and hit Enter
  If you are prompted for an administrator password or a confirmation, type your password or click on continue
    2. in the System Configuration dialog box, click the Startup tab
  3. Locate the entries called KHALMNPR or similar and uncheck the box next to them (there may only be a)
  4. click OK and restart your computer
  5. after reboot, change the speed of your mouse pointer and restart

  This should solve your problem.  Please let us know.  Thank you.

  Shane
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Setting advanced system not saved after reboot/restart

  I changed my settings of performance... then when I restart my computer... the computer is always the same as the front... I use a standard account... when I went to the administrator, it works... I want to change my standard user performance parameters. :'(

  Hi Erik,

  Using the standard user account to change settings?

  If you are connecting with a standard user account and then try to change the system of advance parameters he will automatically restore to the default settings after reboot, due to the user account permission.

  Note: If you want to change the advance system settings you must change the settings using the account administrator only.

• Pav Notebook: Parameters of Synaptics Mousepad not saved after reboot with Win10

  Hi all--nine of these forums. I find that my settings are lost whenever I have reset my laptop for the Synaptics touchpad options scroll mouse, which means I have to be forever just put the laptop to sleep, or reset the settings when you restart. A minor annoyance but when shell out you for a new phone, you expect the basic options to actually work.

  No idea how to fix this? Apart from the very disappointing performance, it is my only complaint for the product

  Hello

  Try the following.

  Hold down the Windows key and press R

  In the run box, type regedit and press enter

  In the registry editor, navigate to the following

  HKEY_LOCAL_MACHINE\SOFTWARE\Synaptics\SynTP\Install

  Inside, look for a key named DeleteUserSettingsOnUpgrade

  If it is present, right click on the key and select Edit

  Set the field data of the value 0 (zero) , and then click Ok.

  Close the registry editor.

  Make the Synaptics setting changes you need in the usual way and save them, and then check if they are now kept after a reboot.

  Kind regards

  DP - K

• My settings in windows are not saved after each stop

  Hi guys, I'm under 64-bit Windows 8. My settings are not saved after each stop, every time I start it tells me that I just installed Avast and IE is my browser by default when I chose Chrome previously. Arrangement of icons in my desktop reset after every start. Reliability Monitor shows that I have a lot of problems "Windows was not properly shut down", even if I stop my office in good and due form. Help, please.

  Hi Kelvin,

  Here are a few steps more you can follow:

  Step 1:

  I suggest you to activate the built Admin account.

  (a) press Windows and x key together on your desktop screen.
  (b) click on prompt (admin).
  (c) type: net user administrator /active: Yes

  Note: Follow the same steps and type net user administrator /active: no to disable the administrator account after the diagnosis is made

  After activating the administrator built-in, please try the steps below:

  Step 2:

  The built in Administrator account to create a new user account and transfer the profile data.

  Please follow the steps below to do so:

  (a) press Windows and x together and select Windows Explorer.

  angle b) click on the tab and click Options at the top right.

  (c) click the View tab, and then click on display the drives, folders and hidden files.

  (d) uncheck the box that says Hide protected operating system files.
  (e) click Yes to confirm, and then click on OK.

  (f) to find the C:\Users\Old_Username folder, where C is the drive on which Windows is installed, and the old username is the name of the profile you want to copy the files.

  (g), select all files and folders in this folder, except the following files:

  Ntuser.dat
  Ntuser.dat.log
  Ntuser.ini

  (h) right click and select copy.

  (i) find the C:\Users\New_Username folder, where C is the drive on which Windows is installed, and the new username is the name of the new user profile you created.

  (j) right click in the folder and select Paste.

  (k) restart your PC and check if the problem persists.

  Thank you.

• Windows Update will not install after reboot required.

  Update of security for Microsoft Visual C++ 2005 Service Pack 1 (KB2538242).

  I'm running Windows 7 x 64.

  I have a Windows update that requires the closing down to install.   This is not, and after reboot, I have a slower computer.

  At this point, even removing the offending program would be useful.

  Thank you for your expertise.

  Hello

  Try the methods provided below and see if they help to resolve the issue.

  Method 1:

  In the case where you are not able to install specific updates then, try the troubleshooting provided in the link below steps to fix the problem.

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

  Method 2:

  You can also try to reset the Windows Update components and check if that helps.

  Click on the link provided below for more information about resetting Windows Update components.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Method 3:

  Start the computer in a clean boot state and then try to download the updates manually.

  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note:

  After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Download the updates manually from the link provided below.

  MFC Package security update Microsoft Visual C++ 2008 Service Pack 1

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=26368

  MFC Package security update Microsoft Visual C++ 2005 Service Pack 1

  http://www.Microsoft.com/download/en/details.aspx?ID=26347

  I hope this helps.

• I have Safari 9.1, El Capitan. The changes I make in the Safari preferences are not saved after that I close the program. There is no such thing as a Library/Preferences/Safari. What should do?

  I have Safari 9.1, El Capitan. The changes I make in the Safari preferences are not saved after that I close the program. There is no such thing as a Library/Preferences/Safari. What should do?

  I think you're looking in the root folder not your home folder.   Tilde ~ in front of the first slash indicates the folder.

  Try this...

  Quit Safari.

  Open a Finder window. In the Finder menu bar, click go > go to folder

  Type or copy paste the following text:

  ~/Library/preferences/com. Apple.Safari.plist

  Click OK, and then move the com.apple.Safari.plist file to the trash.

  Restart Safari to test.

• Windows import program does not close after you import photos from a camera.

  Windows import program does not close after you import photos from a camera. It is frozen on the desk and the computer must be restarted to use the program again, windows does not detect a problem, how to fix it.

  original title: importer of photo and video for windows

  Hello

  1. which version of the operating system is installed on the computer?
  2. don't you make changes on the computer before the show?

   
  Method 1:
  You can perform a clean boot and check if the problem occurs.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the Knowledge Base article.
  
  Method 2:
  Alternatively, you can change settings for importing pictures and videos in windows by following the steps from the link.
  http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-importing-pictures-and-videos
   

• Windows 7 default gateway is not available

  I have excellent connections to MI-Fi wireless or your router (home or office) but no internet connection by using Windows 7 on netbook Dell. I tried to understand other assignments similar to my problem, but the answers are too technical.  is there a solution for Dummies?  my connections network does not show a connection to the Local network, if that helps.  After you follow the instructions in troubleshooting, I get a message that says default gateway is unavailable.

  Hello

  1. Since when are you facing this problem?
  2. is it works much earlier on this computer?
  3. don't you make changes on your computer before this problem started?
  4. you have from any other computer connected to the same network? If logged in, you are able to access the Internet on the other computer?
  In the meantime, follow these steps and check.
  Step 1:
  First, you try to run the troubleshooter from network built into windows 7 and check if it can help solve you the problem of connection to the Internet.
  Access the link below and follow the steps.
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7
  Step 2:
  If the problem persists, you can manually assign the IP address and the default gateway and check if it works very well. Before assigning the IP address and the default gateway manually, make a note of the IP address on the computer. To do this open command prompt, type ipconfig and press to enter. This displays the IP address, make a note of it.
  To manually assign the IP address and default gateway, follow these steps:
  a. in the system, right click on network icon tray. Choose the open network and sharing.
  b. right-click on the connection to the Local network and click Properties. c. double-click Protocol Internet Version 4 (TCP/IPv4) and assign the IP address manually.
  Example: Old Ip address is 192.168.0.1
  Replace the IP 192.168.0.50
  d. let the subnet mask and default gateway are the same.
  Subnet mask = 255.255.255.0
  Gateway by default, would usually 192.168.0.1 or 192.168.1.1
  e. click apply then click Ok and restart the computer and check if it helps to solve the problem.
  Step 3:
  You can also try to contact the manufacturer of the router and try to reset the settings of the router and check if that helps you solve the problem.
  
  Step 4:
  Also try to uninstall the network card in Device Manager, then restart the computer. Later allow Windows to install generic drivers and check if it works very well.
  
  Before you uninstall the network card, I you suggests to create a System Restore Point manually, so that in this case, a problem occurs when performing these steps, you can always perform a system restore.
  
  Follow the steps below to uninstall and reinstall the network card.
  a. click on start
  b. in the type of search box of start of "devmgmt.msc" and press enter
  (c) in Device Manager, expand network adapters
  d. right-click on the network adapter and uninstall.
  e. restart the computer, and then reinstall the network card.
  When uninstalling device drivers make sure you put a check mark against 'delete the driver for this device '.
  
  Aziz Nadeem - Microsoft Support

• Windows 7 does not start after reboot.

  I did a fresh install of windows 7 ultimate. Setup was good, he began, updated, installed some drivers and software, tried to reload and bad news. Restarting stopped with a white screen where the startup screen should be. I turn off the cpu and no problems at windows startup. I tried several times and no luck. If the restart from the menu start, it stops at the empty screen. "I seek answers and possibly other charges was installing, disabled all updates and disconnected all the printers, speakers, etc." and again not luck. After that first start and the processor does not start after a reboot. It stays on with a blank screen and no response to keyboard... Help, please...

  I corrected this easy on my HP 7100

  Go to management, records and defined as being active, then fixed, make a right click on the partition with windows on them might have to boot windows disk and choose repair option 2 times I found on a model of friends. Anyway, problem fixed, now able to restart (warm start)

• Error Windows 8 "default gateway is not available".

  Original title: standaardgateway is niet available

  Windows 8

  now Internet then stops and begins again with appreciated: says "standardgateway is not available.
  What can be the problem? Who knows the real solution?
  Default gateway is your router/modem

  McAfee can cause this

  If you do not have McAfee try resetting your modem/router
  Call your ISP and tell them that your router is doing this and ask for replacement

• Windows xp sp3 does not start after the failure of windows update and restart.

  Hello

  My ADVENT 3217 pc runs windows xp sp3 does not start once a windows recently failed update and restarted. He's just in a reboot loop. The first time it happened I got an error code of c000021a. I tried pressing F8 and try to start safe mode and other options... but still nothing. I also tried to use my restore disc supplied with my pc. So far, I've only tried the non-destructive recovery to restore windows and it did not work. I don't want to lose my files that I have not saved for quite awhile.

  Can anyone help?

  Thank you

  Hello

  · The updates you have installed prior to this problem?

  You can try the steps listed in the link below: how to solve an error "STOP 0xC000021A": http://support.microsoft.com/kb/156669

• "Default gateway not available" when you connect to a wireless network

  Why can't my computer connect to the internet wirelessly? I diagnose the problem and he told me that the default gateway is not available. I do everytime I turn on my computer and it does while I use it sometimes too. I made sure it wasn't the router; I have reset and turned it off and everything that has recently obtained another supplier of the internet with a new router and it has the same problem.

  Could you do a few steps to see if communication with your router is OK?

  I assume that you are connected to your wifi router, but it lacks the gateway address.
  1. go in Control Panel (click on the windows logo and choose Control Panel)
  2. in control panel, click on network sharing Center
  3. in the network sharing Center, click on wireless network connection
  4. in the State of the wireless connection, click details...
  Here, you are supposed to see detailed information on your Wifi connection.
  Important addresses are:
  Address IPv4 - e.g. 192.168.1.2
  IPv4 subnet mask - should be 255.225.255.0
  IPv4 gateway - is the one who seems to have difficulty - should look like 192.168.1.1 (but may be completely different), but must be the same 3 first issues that the "IPv4 address" in my example 192.168.1.
  What are your numbers?

• Satellite L is not start after reboot or shutdown

  Hello

  My phone after reboot or shutdown is not starting.
  I need to turn off the computer and wait 10 seconds and try again, after it start ok.

  All suggest?

  Thank you
  Dvir

  Difficult to say why this happens
  Did you test the HARD drive for a possible damage?

  Test the drive using HDD Drive Fitness Test.
  The HARD drive is perhaps not entirely correct and it must be completely stopped before you start spinning once again

• Using Vista, WiFi will not automatically connect after that reboot - config "connect automatically" will not save after reboot.

  Using my Lenovo with Vista laptop, the wireless re-does not after I stop/restart.

  I checked the "connect automatically when this network is in range" parameter in the configuration Wifi, but the box always becomes disabled after that I reload.  Why this configuration will not save after that I reload?

  How did your problem related to Windows Update?

  Post here instead, please: http://social.answers.microsoft.com/Forums/en-US/vistanetworking/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft