Windows 7 error 0x8007007B after reformatting activition

Similar Questions

• Problem activating Windows 8, error: 0x8007007B.

  Original title: help me to microsoft.

  I get an error 0x8007007B whatever that means? and I don't know how to activate my windows 8 pro. Help me please...

  See:

  Error 0x8007232b or 0x8007007B occurs when you try to activate

• Video card driver displays an error message after reformatting computer with Vista

  I reformatted my computer using windows vista and I kept getting an answer that the used copy was an illegal copy of windows. In the meantime my computer was working fine. I called Microsoft and they verified that it was not an illegal copy and gave me an additional code to activate windows. After activation, my image of the screen became smaller with a border of 1 inch black around the screen (I have a widescreen monitor). I tried to correct this problem and have discovered that my video card driver has an error message saying that windows has stopped this device because it has reported a problem. I tried to reinstall the latest version of the driver, update to windows vista and tried all the suggestions that have been proposed on the microsoft Web site, and it still doesn't work. I reinstalled everything again with the same problem. Can you please help me solve this problem. Thank you.

  Video driver problem

  Hi Skyler16,

  Please see the article below with some initials/troubleshooting information:

  http://Windows.Microsoft.com/en-us/Windows7/video-cards-frequently-asked-questions

  If you need further assistance, please specify the brand and model of your computer and video card.

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Pavilion ZV6000 AMD64 Athlon Windows XP error message after you connect to XP continuous reboot

  Help!  My Pavilion ZV6000 AMD64 Athlon Windows XP suddenly started a string that I can't stop without turning off the computer.  Immediately after logging on XP, a quick screen comes up with an error, then it immediately goes into a restart.  The screen flashes too fast to read.  I get any user ID that I use.  If I boot in safe mode, I get the same message.  I rebooted on the windows cd, I restored to an earlier date, but nothing helped.  When I try to get deeper, I wonder the administrators password.  I tried all my passwords usual, including "admin" and nothing comes to me to pass the administrators password.  I had this unit since then and have never done any hardware change.  Is it possible to bypass the administrators password?  I'm at a point of trying to re - install windows, but cannot.  Any other help would be appreciated.  The unit was new in Sept 05 and my 3 year extended warranty has just expired.

  Of course, here are the steps:

  Perform a hard disk of that test

• 800 b 0100 Windows Update error even after system update readiness tool

  The last time I tried to install updates, an update installs with update error 800b0100.  I have downloaded and run the system tool in the proposed aid system but I still get the same error.  I use 32 bit Windows Vista Home Premium Service Pack 2 on a dual-boot Apple iMac.  What should I do now?

  Hi Michael,

  1 update you are trying to install?

  2. have you tried to install the update manually?

  Method 1:

  You can run scanning of the file system [SFC] checker on the computer which will replace missing or corrupt files & try to install the stand-alone update package.

  For more information, you can consult the following link.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  Method 2:

  After you run the analysis, you can try to download and install the standalone update package.

  a. to download updates from the Microsoft Download Center

  b. Enter the item number in the field search and download the same.

  c. double-click on the downloaded file.

  d. click on run and follow the wizard to install it.

  Hope this information is useful.

• Windows update error 0x8024400A after reinstalling xp pro

  Hello.. I just reinstalled xp pro for a bigger drive now I can't download sp3, mse or other updates displays error 0 X 8024400 code everytime I try

  an advise please

  I had the same problem, they say it's for communication problems, etc, but my internet connection was very good.  I solved it download SP3 from: http://www.microsoft.com/en-us/download/confirmation.aspx?id=24 I got in trouble 'save' the file so I clicked on 'Run' and updated my windows, then Windows Update worked as usual!

• Windows 8 error 0xc000021a

  I have a gateway tower that does not start. It tries to start every time I get error 0xc000021a. This means that windows failed to update and im stuck in an infinite loop trying to boot the computer. So I go to the command prompt and type the dism commands or s, and I get the following errors, error 87, 50 or Windows Resource Protection not start the repair service. I entered several commands that countless Web sites suggested as sfc/scannow or dism /windows/winsx/pending.xml\ /windows/winsxs/pendin.old or dism/cleanup-image /restorehealth/windows and many more. I have no idea what to do someone help. The office came with windows 8 is installed, bought new at Best Buy about a year and half ago. More I don't had not updated to 8.1 so its windows 8. It won't let me same restet or refresh the computer it always says it is facing problems.

  Hi Israel,

  Please contact Microsoft Community.

  I understand the inconvenience that this may cause. I'll be happy to help you.

  I suggest you refer to the position of Manjunath Siddappa replied on 8 February 2013 and follow the steps as suggested in the link below.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-system/Windows-8-error-0xC000021A-after-update-twice/192fa700-8d58-4153-a2af-9d6cb36d0b3a

  Keep us informed of the status of the issue.

• Windows Watch has expired, then try to activate the error '0x8007007B.

  Original title: windows shows expired.

  I bought the surface 1 pro dealer certified in Thailand in March 2014.  There are some technical problems with somehow windows startup with sound missing keyboard.  I have tried many things but nothing helped.  I have reset the software in "all delete and reinstall windows" option.  Currently my windows is back.  A few days later, it shows in the center of the action I need to activate my windows.  I tried to turn it on, but it shows the error '0x8007007B' without any successful activation.  I also notice my windows will expire September 2014 too.  How can it be?  If I buy a computer, I expect to use for a few years, not less than one year.  So please help in the following three elements:

  1 activate my windows

  2. windows will expire in September 2014 (after the purchase of only 6 months)

  3. upgrade to 8.1 (I'm updating from the beginning and it shows no more 8.1 upgrade in the Windows store)

  Best regards

  Preecha P.

  In general, when Windows 8 indicates it will expire in 6 months, which suggests that you use a Windows 8 volume license distribution that requires KMS activation.

  KMS license that requires that you enable with a KMS host. This is normally configured by an IT Department in a company to manage activations of clients on a network. This should be done every 6 months (180 days).

  We don't have a way to download the recovery image. Please contact support here.

• How to get a Windows 8 version which I can boot my computer after reformatting?

  I bought my key online almost a year ago and used a friends disk to load this last time and as such have a copy me.

  I tried the option "refresh and reinstall Windows, but it gives me an error and says that some files are missing, my media will provide.
  I just reformat my computer, as he will terribly and unnecessarily slow, but I have no way to do it.
  On another note - my windows key, that I received by email will be valid if I were to try to use it again after reformatting?

  See:

  http://techingiteasy.WordPress.com/2013/02/14/how-to-obtain-64-bit-Installer-and-create-install-media-for-Windows-8/

• After installation of 2050 HP desk jet 043 Windows 7 error code

  OT: windows 7 043 error code
  After that installation HP 2050 jet windows desktop 7 home top poster 043 with legacy software error code

  Hi jitendramishra,

  Method 1
  I suggest you to run the troubleshooter printer from the following link:
  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Method 2
  If the steps above fail, I suggest you try to uninstall and reinstall the drivers from the manufacturers Web site.
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?CC=in&LC=en&DLC=en&product=4027469

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• Windows xp update fails after reinstall OE discs error number: 0x8024400A

  Windows xp update fails after reinstall OE discs error number: 0x8024400A. Cannont even run Windows update at all.

  Hello
   
  To work on the issue, consult these links.
   

  Temporary connection related errors may occur when you use Windows Update or Microsoft Update

  http://support.Microsoft.com/kb/836941
   
  Note: make sure that you enable the antivirus software, other security and firewall after the test programs.
   
  Caution:
  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  You can also designate a similar thread that addresses the question:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/how-can-i-get-Windows-Update-error-x8024400a/35ba7694-c9b2-4043-a4c0-777d4b7736dc

  Hope the information is useful.

• After reformatting and installation, activation, I get a message that I don't have a valid copy of XP. Get errors from each Web site for certificate errors. Any ideas?

  Validation problem

  After reformatting and installation, activation, I get a message that I don't have a valid copy of XP.  Get errors from each Web site for certificate errors.  Any ideas?

  I think I found that the time and date on the pc was showing Jan of 2002.  Seems to be loading of updates now!  I hope that this will solve.

• Analyze the error "C:\Windows\Panther\unattend.xml" after the recovery attempt (computer laptop gateway)

  I had a problem, which lead to the other. I'll just show what I posted in the other thread. Thus, I have provided the link for reference.

  This is the excerpt from this thread: http://social.answers.microsoft.com/Forums/en/vistawu/thread/a42818dc-4037-4551-aaa4-bc1330d4203b?prof=required

  "Well, then taking your advice, I found the software to restore the computer to its original state. I save all of his documents and then run the restore process. Should be no problem right?

  NOPE! It installed fine, and now it is stuck in an ANOTHER infinite boot loop! (This laptop must love restart all the time).

  So yes, this is what he does now.

  It starts normally with the typical screen of Vista (the puke green bar fly across the screen). Then it comes up with the screen blue-green pretty fancy, and it says "Please wait while Windows continues to set up your computer...". »

  Right now, it comes up with this box beautiful error "Windows could not parse or treat [C:\Windows\Panther\unattend.xml] unattended Setup answer file. The answer file is invalid. "with the OK" "button. You click on 'OK', it stops and then restarts, shows the same message.

  I tried Googling this error, but nothing of the suite of solutions my situation. Ugh! Of course, I can't get back into windows and simply stop and start the restore process again.

  Ideas? »

  Just so that you know it's a she is a Windows Vista Home Premium 64 - bit SP1 OEMAct gateway.

  http://support.gateway.com/s/software/MICROSOF/Vista/7515418/7515418su531.shtml

  Above is how the gateway recovery is supposed to work.

  Also, try this:

  Try using a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the gateway > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  To exclude software as the problem.

  See you soon.

  Mick Murphy - Microsoft partner

• Update Windows Vista error code A 8024, 000 after replacing the HARD drive

  Hello

  I had to replace the failed hard drive on my laptop (I replaced it with the same brand and size).

  After that I used the recovery CD, Windows Update gives me error code A 8024, 000.

  I tried the solution provided in this thread, but did not work for me:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/Windows-Update-error-code-8024a000/562845f3-78d5-42A0-bed5-e3fd39f01df7?page=1&TM=1337378075490

  I also tried to load the Microsoft Fixit utility, which has not installed, I tried to update the installer but it gave me an error as well. Also the installation of SP2 crashed with an error (8000ffff if I remember correctly)

  Any help is appreciated.

  Thank you.

  Eugen

  Hello

  1. which utility Microsoft Fixit did you tried to load?
  2. what happened when you tried to load the Microsoft Fixit utility?
  3. what was the error message when you try to update the installer?
  
   
  Method 1: Try running the fix - it of the article mentioned below, if you not him have not yet tried.
  The problem with Microsoft Windows Update is not working:
  http://support.Microsoft.com/mats/windows_update/
  Method 2: run SFC scan. Analysis (sfc) System File Checker will Windows replace corrupted or missing system files on your computer.

  Scan sfc enforcement procedure:
  a. Click Start, click principally made programs, accessories, right-click on command prompt and select run as administrator.
  b. click on continue or provide administrator credentials if prompted.
  c. in the type in the following command prompt window and press ENTER:

  sfc/scannow
  Refer to this article for more information:
  http://support.Microsoft.com/kb/929833
   
  Method 3:
  
  0x80000FFFF error code when you download updates on a computer running Windows Vista by using Windows Update or Microsoft Update:
  http://support.Microsoft.com/kb/946414
  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://support.Microsoft.com/kb/322756/
  Download Windows Vista Service pack from here:
  How to obtain the latest Windows Vista service pack
  http://support.Microsoft.com/kb/935791
  Reference:
  The problems with the installation of the updates:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

• Windows Vista cannot find any networks after reformat

  Windows Vista cannot find any networks after reformatting. Help!

  Go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > look for it last network adapters Vista drivers > download/install the.

  The computer you are using now if you have an Internet connection with the other > download / save drivers > copy them into Flash Drive > transfer / install on another computer/laptop.

  See you soon.

  Mick Murphy - Microsoft partner