Windows 7 firewall will not use recommended settings.

Similar Questions

• 0 x 80070422 windows firewall does not use recommended settings to help protect your computer

  Hello, I kepp getting this firewall of windows message 0 x 80070422 does not use recommended settings to help protect your computer,.

  Whenever I click on the recommended use of the parameters, it gives me this code. I ran virus and malware scans and I foud more but now they have been removed. But still, I'm afraid that I don't have a wall of fire and that anthing can pass through.

  If anyone can give me some advice it would be greatly appreciated.

  Marko7

  Hello

  Run an online scan to check any virus or any other malicious software:
  http://OneCare.live.com/site/en-us/default.htm

  and see here

  Error code 0 x 80070422 cannot activate the firewall

  I would like to know if this helps
  Elvis

• The firewall of Windows 8 will not use recommended settings.

  I have antivirus and firewall ZoneAlarm Security and will not turn on the Windows Firewall. I disabled ZoneAlarm firewall function and the firewall will not always use the recommended settings. I uninstalled ZoneAlarm and still the firewall do not use the recommended settings and activate. How can I fix this program?

  Are you kidding me? I said Windows 8 and you gave me solutions Windows 7?

  Although most of the solutions may apply to windows 8... And other suggestions check these steps... http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-Security/Windows-Firewall-service-cant-start/d322e0bd-10DC-4b85-B297-007133d91a9a

• Firewall Windows does not use recommended settings

  Firewall service Windows is not running: does not use recommended settings

  Firewall service Windows is not running: does not use recommended settings

  Please specify:
  > windows firewall service is not running
  > does not use recommended settings

  If it running or NOT?
  Which of the above is the problem?

  RE: windows firewall service does not

  Start button > in the search box, type services > press the Enter key > scroll down to Windows Firewall and click on it...
  under the State column, it must be said... started
  under the Startup Type column, I must say... Automatic

  If it does not say that, right click on Windows Firewall > click Properties > make the changes.

  RE: does not use recommended settings
  
  Start button > in the search box, type windows firewall > looks upward at the top on the left, click on Windows Firewall > click on change settings > put on a blue radio point (recommended) level > OK for the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Windows Live Photo will not use HP F380 for scanning

  I have a HP F380 all-in-One on an Acer Aspire running Windows 7 32 bit. I tried to get a scan if Windows Live Photo Gallery, but it allows me to choose which device (appears as Hp Deskjet F300), when I hit 'Import', the window of the unit closes and does nothing.  I have no error code. (Runs fine)

  I have edited/reinstalled/restart the driver, run the printer if troubleshooting and when I hit the scan button on the printer it scans (will not let me change it), but live didn't do nothing despite knowing a scanner is attached. I tried to use the paint and Windows Fax and Scan, but when he tries to connect, it lags behind on and I have to use the Task Manager to close the programs.

  Hello Youkaiyami,

  Thanks for posting your question on the forum of the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  Have you made any changes to your computer hardware or software?

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Please use the suggestions in this article to help Microsoft and check.
  Reference:
  The problems of scanning
  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-scanning-problems
  (Also applies to Windows 7)

  Method 2:

  Run the System File Checker and check the issue.

  Reference:

  Use the System File Checker tool to repair missing or corrupted system files
  http://support.Microsoft.com/kb/929833

  System File Checker is a Windows utility that allows users to find corruptions in Windows system files and restore the damaged files.

  Please also update the printer drivers from this link:
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4062&LC=en&cc=us&DLC=en&sw_lang=&product=1128296

  For reference:
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Windows Firewall is not using the recommended settings and I have no control

  Operating system: Windows 7 Ultimate
  All classes Microsoft offers updates installed from 19/09/12 @ 19:00
  _______________________________________________________________________________________

  I recently discovered that I have seem to be 'locked' on my firewall settings.  I discovered it not because I had problems with my firewall or internet but because I went to control panel to change some settings of firewall and found this:

  http://oi49.Tinypic.com/2r3h387.jpg

  So I press "Use recommended settings" and think computer for a few seconds and then nothing changes or happens.
  My firewall seems to work very well, but why I can't access its settings?

  The first thing I did was a scan of my computer with Microsoft Security Essentials and Spy-bot Search and Destroy.  Microsoft Security Essentials found a virus, but after I removed and restarted my computer the problem remains.

  I did a lot of research on this problem before posting here then here are the following things, I've tried.  Every possible solution is fixed at 1 photo:

  _______________________________________________________________________________________

  Possible solution 1: http://oi48.tinypic.com/2ng55hi.jpg

  When I type in "netsh firewall reset" this happens: http://oi46.tinypic.com/i2ouc1.jpg

  The rest of the commands seem to work, but after that I restarted my computer it had no effect.

  _______________________________________________________________________________________

  Possible solution 2: http://oi46.tinypic.com/2vmeh6p.jpg

  I do not have the other firewall on my computer.  I don't have Norton or McAfee that apparently caused this problem with other people.  There is no error message.

  When I right click on windows firewall "restart" is greyed out, but I can press start.
  Empty the column next to it with the State.  When I press start, it happens: http://oi48.tinypic.com/33cc4et.jpg

  _______________________________________________________________________________________

  Possible solution 3: http://oi47.tinypic.com/33nhu80.jpg

  Method 1: Windows event controller does not exist.  The base filtering engine is started and also shows as running in the Task Manager.  Authorization of firewall Windows Driver is already set on request.

  Method 2: SFC/SCANNOW not detected any problems: http://oi45.tinypic.com/11gj7fn.jpg

  _______________________________________________________________________________________

  Possible solution 4: http://oi46.tinypic.com/2lu30ut.jpg

  Method 1: Even as a solution as Possible 3.

  Method 2: I made a boot minimum and restarted my computer with ONLY Microsoft services (I disabled all startup unique programs and service not microsoft).  The problem persisted.

  Method 3: even as Possible 3.

  Method 4: Not applicable for me.

  Method 5: I downloaded the antivirus and used today at about 18:30.  No viruses were found.

  _______________________________________________________________________________________
  I tried other things:

  If I try to use windows firewall advanced in this case: http://oi47.tinypic.com/hu1y0o.jpg

  According to Task Manager Firewall is not running and when I try to start it, this happens: http://oi45.tinypic.com/5vdddy.jpg

  _______________________________________________________________________________________

  So far I have not found any that contributes to this problem.  Any help would be appreciated.

  Hello

  Method 1

  I suggest you to run a scan using Windows Defender Offline offline just to make sure that the computer is clean, you have to download it from another computer if possible.
  http://Windows.Microsoft.com/en-us/Windows/what-is-Windows-Defender-offline

  Method 2
  I think an upgrade on the spot or complete reinstall would be necessary due to unknown changes that may have been made by the virus. You must back up all your files by using the option to be sure. If you perform a full reinstall you should analyze your backup before restoring the files.

  How to perform an upgrade on the spot on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2
  http://support.Microsoft.com/kb/2255099

  Note: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.
  http://Windows.Microsoft.com/en-us/Windows7/back-up-your-files

• Windows Vista SP2 fails to install and Windows Firewall will not stay

  Hello, I have problems with Vista 64-bit, it will not install service pack 2 and Windows Firewall will not stay. I tried to manually enable ICF manually and it won't turn. It gave me error 6x9D. I ran several antivirus scans malware byte and pc cleaner pro 2012 and the issue has not been resolved. If I could get help would be much appreciated. Thank you

  Hello

  What do you use for security?

  If you are using an Internet Security Suite, it will have its own firewall and disables the default Windows Firewall.

  And you should have only one firewall to avoid problems related to the operating system.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  You have not installed SP1?

  If so, try a direct download of SP2.

  Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669

  And if you have any problems:

  There is a Forum that Microsoft has put in place for problems with Vista Service Packs. If repost you the Forum they will definitely try to help you here...

  http://social.technet.Microsoft.com/forums/en/itprovistasp/threads

  See you soon.

• Windows media player will not play videos that I created a few years back. they use to play very well; now, I received the acquired codec error message. I use wmp 11

  My old videos in my windows media player will not play. acquire CODECS rises. I get audio but not video for all the movies at home. Movies that I downloaded and clips play very well. How can I fix it. I use wmp 11.

  Hello satindoll11233,

  1. What is the exact error message you get when you try to play videos?

  2. What is the format of the videos that you try to play?

  3. are you able to play other files with Windows Media Player?

  Media Player will not be able to play video files, if there are no required codecs or video format is not supported by Media Player.

  I suggest you to check the format of the video you are trying to play. You can also try the steps in the article to resolve this problem:

  http://support.Microsoft.com/kb/926373

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• I use Photoshop for 12 years or more on a succession of computers.  It works well on my current machine (Windows 7), but will not work on a computer that is running Windows 10 built for me.  Photoshoppowers upward but then gets off by Win

  Question? I use Photoshop for 12 years or more on a succession of computers.  It works well on my current machine (Windows 7), but will not work on a computer that is running Windows 10 built for me.  Photoshop turns on but gets so turned off by Windows 10. V. frustrating - what can I do?

  What version of Photoshop? have you tried to do a right-click on the icon and selecting run as administrator

• Windows Media Player will not play WMV files

  Windows Media Player will not play WMV files, I get the following error:

  "Windows Media Player cannot access the file. The file may be in use, you won't have access to the computer on which the file is stored, or your proxy settings are may not be incorrect. »

  Evaluating is not a problem

  Other file formats work well

  Any reflection on a fix, I have already searched the web for a fix, it appears, this is a common question, but nobody has a solution that works

  Hello

  Method 1:

  FIX: Windows Media Player 11 cannot play WMV files that contain multiple video streams

  http://support.Microsoft.com/kb/947403

  Method 2:

  I suggest to disable audio enhancements and check if you're able to play .wmv files. Follow the method 1To disable audio improvements.

  a. Open Sound by clicking on the Start button, and then clicking Control Panel.

  (b) in the search box, type sound, and then click sound.

  c. on the playback tab, click speakers and then click Properties.

  d. click the enhancements tab, and then select Disable all enhancements checkbox.

  Method 3:

  I suggest to create a new user account and check if you're able to play the files. Click on the link below to create a new user account

  Create a user account

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  Thanks and regards.

• Windows Photo Gallery will not save the edited images

  Windows Photo Gallery will not save the edited images. the files are not read-only; older files can be modified; the most recent files cannot

  Message says photo library was beset with problems and the modified file cannot be saved

  Windows Photo Gallery will not save the edited images. the files are not read-only; older files can be modified; the most recent files cannot

  Message says photo library was beset with problems and the modified file cannot be saved

  ================================================
  Windows Photo Gallery... Cannot save modified photos...

  No guarantees and proceed at your own risk!

  Good luck...

  --

  (1) try to do a system restore to an hour before
  the problem started.

  With the help of the Windows Vista system restore
  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  --

  (2) I've seen reports that this problem may be related
  Kodak Easy Share software. Installation "Kodak
  Single-action Version 8 for Windows from the
  the following link may be the solution.

  Kodak Easy Share 8 software version
  http://www.kodak.com/eknec/PageQuerier.jhtml?PQ-path=130&PQ-locale=en_US&_requestid=5320
  (FWIW, it's a good idea to create a system)
  restore point before installing software or updates)

  --

  (3) I saw reports that could clarify the next steps
  until the question...

  Right click the library icon and choose
  "Run as Administrator"

  --

  (4) I copied the info from a tech forum on
  the net... I don't know if it works, but maybe it's
  worth a try:

  A. right click on Task Manager open the
  taskbar on the bottom of your screen and choosing
  The task in the menu Manager.

  B. click the tab process, along the upper part of the
  The Task Manager screen.

  C. in the process tab, select the corresponding button at the bottom
  left of the screen that says "show processes of.
  all users"and click on it. Click 'Continue' to the UAC
  the prompt that appears.

  D. the screen should turns off a moment, then
  back with much more than process listed. Click
  the "Command line" column to sort the list and
  Search:

  "C:\Program Files\Windows Media Player\wmpnetwk.exe"

  Read the description in the next section on:

  Windows Media Sharing Service reader network

  F. click on this process. Click the end «»
  Treat button"at the bottom right of the screen.
  Confirm 'End process' if necessary.

  You should now be able to save your changes to
  your photos normally. The bad news is that this
  should be performed whenever you start or restart Vista.
  And I don't know how to prevent the situation from
  in the first place of loading.

  --

  5) posted by: artologik
  The solution came to me when I could not recreate
  the problem on a laptop with Vista Home.
  Everything I could compare, I noticed that the
  %Path% environment variable was not between different
  the 2 machines.

  I guess that WLPG relies on the dll must be found
  on the way to the system; When not found, it must return
  Back to ' base or incomplete "library finds it
  the default specific paths or the user. The solution for
  me has been to ensure the entire path system
  to the folders in the order appropriate.

  To fix, follow these steps:

  A. right click on the COMPUTER icon on the
  desktop and choose PROPERTIES

  B. choose ADVANCED SYSTEM SETTINGS

  C. Si you are prompted by UAC to allow, go ahead.
  and ALLOW

  D. click on ENVIRONMENT VARIABLES...

  E. in the bottom half, under SYSTEM VARIABLES,.
  Find the PATH variable and highlight the

  F. click the button CHANGE

  G. ensure that what starts with
  % SystemRoot%\system32;%SystemRoot%;

  H. ensure you that a semicolon separates each entry.

  I. click OK three times

  J. restart the computer

  Good luck...

  John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Windows media player will not download music on a CD - R and get a testament written no disc error

  I have Windows 7 Ulimate and my Windows Media Player will not write to disk when downloading music on a CD - R. It will show all the songs as being outstanding, but it will try to write to the first song and stop copying the disk.  Ed Herman, * address email is removed from the privacy *

  Hello

  1. you receive an error message or error code?
  2. what file format you are trying to write to the disk?
  3. don't you make changes on the computer before the show?
  4. what burning software do you use?

  
  Method 1:
  You can perform the steps of troubleshooting provided in the link and check out:
  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-and-burning-CDs-DVDs-and-BluRay-discs-Troubleshooter
  
  Method 2:
  You can also try to update the driver for the CD/DVD rom burner driver and check if this may help:
  Update drivers: recommended links
  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

  You can also check out the link for more information:
  http://Windows.Microsoft.com/en-us/Windows7/burn-a-CD-or-DVD-in-Windows-Media-Player

  http://Windows.Microsoft.com/en-us/Windows7/burn-a-CD-or-DVD-in-Windows-Media-Player-frequently-asked-questions

• Windows user login will not be displayed

  Laptop Acer 5742 G (upgrade to 1 TB HARD drive)

  Problem: User login Windows is not appear.

  History:

  I wanted to fast my laptop at the start and so I did the exercise verified and I edited programs and services to load at startup, after that I got a new start, all services were disabled, put them on automatic and I run even if that bit of wouldn't start. After that System Restore might work, I restored it 2 days ago. He didn't restore properly because my anti-virus has been on and so I closed and he again. Now every time I boot my OS the Windows user login will not be displayed even in Mode without failure or last good Configuration, it keeps black.

  What can I do? Thanks in advance...

  
  And in the meantime when I continue to press ALT and quickly hit F10 for eRecovery Acer in the trunk, will not work as well.

  Hello BrickBone,

  You need start using the Windows 7 installation disc and try startup repair options.

  If your system is damaged and cannot access the menu system on your computer Recovery Options, you can access it using the installation disc of Windows 7 or a USB flash drive or with a system repair disc if you have created one previously.

  To use this method, you need to restart (boot) your computer using the disc or USB flash drive.

  1. Insert the disc to install Windows 7 or USB flash drive, or a system repair disc, and then turn off your computer.

  2. Restart your computer using the power button on the computer.

  3. When you are prompted, press a key, and then follow the instructions that appear.

  4. On the page install Windows, or on the System Recovery Options page, choose your language and other preferences, and then click Next.

     • If the page install Windows or the System Recovery Options page appears, and you are not prompted to press a key, you may need to change some settings of the system. To learn how, see start your computer from a disk to install Windows 7 or USB flash drive.

  5. If you are using Windows or the USB flash drive installation disc, click on repair your computer.

  6. Select the Windows installation you want to repair, and then click Next.

  7. In the System Recovery Options menu, click a tool to open it.

  Select the Startup Repair option.

  Let us know if that helps.

  Marilyn

• Windows media player will not start.

  Windows media player will not start. a popes of the window to the top and said to go to the microsoft website I tried to reinstall windows media player 12, I am running windows 7.

  Hello Scotsman,

  How have you tried to uninstall and re-install Windows Media Player 12?

  Uninstalling and reinstalling Windows Media Player:
  Step 1.
  Uninstalling Windows Media Player:
  1. go to start and in the search type "Turn Windows willing or not.
  2. click on "Turn Windows features on or off".
  3. search for multimedia and uncheck the brand in the face of Windows Media Player.
  4 restart the computer
   
  Step 2.
  Reinstall Windows Media Player:
  1. go to start and in the search type "Turn Windows willing or not.
  2. click on "Turn Windows features on or off".
  3. find the multimedia functions and place a check mark in front of the Windows Media Player.
  4 restart the computer.

  If you encounter problems with Windows Media Player, try using the troubleshooter to see if this fixes

  the problem.

  Open the troubleshooting Windows Media Player settings Troubleshooter by clicking the Start button, then Control Panel. In the search box, type troubleshooting, and then click Troubleshooting. Click View all, and then click the Windows Media Player settings.

  If the size of the .wmv files is too large, it can cause Windows Media Player to stop working.

  I try and remove videos from Windows Media Player library and test to see if the size of the files could be a problem.

  Please reply back and let us know if this can help.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Windows Media Center will not work

  Windows Media Center will not run.
  Using Windows 8.0 Pro with Media Center
  Version: 6.2.9200

  Application error:
  Name of the failing application: ehshell.exe, version: 6.2.9200.16384, time stamp: 0x50109c45
  Name of the failed module: KERNELBASE.dll, version: 6.2.9200.16864, time stamp: 0x531d34d8
  Exception code: 0xe0434352
  Offset: 0x0000000000047b8c
  ID of the process failed: 0 x 318
  Start time of application vulnerabilities: 0x01d041a3b75a3eb4
  The failing application path: C:\Windows\ehome\ehshell.exe
  Path of the failing module: C:\Windows\system32\KERNELBASE.dll
  Report ID: f6eacea1-ad96-11e4-be9e-681729142589
  Faulting full name of the package:
  ID of the failed package-parent application:

  .NET runtime:
  Application: ehshell.exe
  Version of the Framework: v4.0.30319
  Description: The process was completed due to an unhandled exception.
  Exception details: System.InvalidOperationException
  Battery:
  at Microsoft.MediaCenter.Store.ObjectStore.Open (System.String, System.String, System.String, System.Reflection.Assembly, Boolean)
  at Microsoft.MediaCenter.Store.ObjectStore.Open (System.String, System.String, System.String, Boolean)
  at Microsoft.MediaCenter.Store.ObjectStore.AddObjectStoreReference)
  at Microsoft.MediaCenter.Store.ObjectStore.get_DefaultSingleton)
  at ServiceBus.UIFramework.UserControlPoint.Launch (System.String)

  Support Microsoft Search, community and Internet research and

  Tried the following with no results:
  -System restore
  SFC/scannow (no error)
  -Enable Windows features and disable.
  -WMC disabled WMC, restart, turned his back on back
  -Turned .net framework, stop, reboot, turned their backs
  -Re-record files associated with Windows Media center.
  -regsvr32 jscript.dll
  -regsvr32 vbscript.dll
  -Troubleshooting
  -Windows Media Player DVD - No problem
  -Windows Media Player Library-corrupt-fixed
  -Windows Media Player settings-fixed
  -Rebuild the Media Center data store.
  -%SystemDrive%\ProgramData\Microsoft\eHome\mediaCenterDataStore.DB (the file does not exist)
  -Ran as administrator

  This error points to the mcstoredb.dll which can indicate a corruption of the data bank:

  GIS [3]. Name = Signature of the 04 problem
  GIS [3]. Value =mcstoredb

  Try the following method 2 in the MS article to rename the mcepg2 - 0.db and other file with extension .db in the folder C:\ProgramData\Microsoft\eHome to rebuild the Media Center data store.

  http://support.Microsoft.com/kb/2400410/

  Article is for Windows 7, but should also work for Windows 8.

  You may have to restart the computer later,