Windows 7 Home Premium backup fails 0xE000020B

Similar Questions

• brand new windows 7 Home premium backup problem

  Hello

  I bought the new HP pavilion DM3 [external dvd player] with the new windows 7 Home premium intalled about 4 weeks ago. After the first round and all updates installed, real I tried windows backup on dvd - r media.

  I started windows backup, after whereas it wonder average wiriteable so I put the dvd - r inside, next step was to format dvd - r [little unusual, but I have no choice]... After succesfull formatting it starts to burn. After a few hours, he was still burning mode 54% without errors and progress too. I pull out the cable of the external dvd burner, the writing process has failed and on dvd was written about 1 cm of layer thickness.

  I tried 2 times again with the same result, but the different progress of burning 56% and 25%

  What should I do?

  Best regards...

  Hello D.A.E.Z.,

  Please check the site for problems with CD/DVD problems.
  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  There is an automatic FIXIT who might help with your problem.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• KB981129 fails to install on OEM Windows 7 Home Premium

  The description of the fix for kb981129 (http://support.microsoft.com/kb/981129) is on-site that describes the problem I have with "Tuner Conflict" and "No tuner available to meet the current demand" error messages when switching TV channels less Windows Media Center in Windows 7 Home Premium.

  When I try to install the fix fails it installer with error message 'the update is not applicable to your computer' even if I'm running Windows 7 Home Premium.

  My Windows 7 is definitely authentic and is pre-installed on my Asus Eee Box 1501 P.

  Can someone from Microsoft, please confirm this problem install and fix the installer so that I can install this fix?

  Thank you and best regards,

  Anders

  Just found and installed http://support.microsoft.com/kb/2284742 which includes KB981129 successfully. My WMC problems are now gone, so problems solved.

  Thank you
  Anders

• I use Windows Vista Home Premium 32 - bit SP2. Is there a way to delete records of only updates of failed or cancelled in the history of Windows Update?

  I use Windows Vista Home Premium 32 - bit SP2.

  Is there a way to delete the records of 'detail' of only updates of failure or cancelled in the history of Windows Update?

  I just installed hotfix for Windows (KB947821).

  It looks like a lot of my earlier 'failed' and 'Cancelled' updates are automatically updated and installed, and successfully, I might add.

  Some dates in some records do not seem much sense. I guess I'm looking for a way to select the records, I want to get rid of.

  Help?

  Hi Jeffrey,.

  It's not really a taken way in charge to remove only the cancelled or failed updates. These are taken from windows logs and displayed in the history. Steps that Jose post is a way to remove all files in history and will remove all updates as well as a failed/cancelled updates successfully.

• After that I installed Gemuine Windows 7 Home Premium 64-bit. However the activation fails

  1. number and product name
  Presario of Compaq CQ62-228DX product number • HP XC432UA #ABA

  2 operating system installed

  
  64-bit Windows 7 Home Premium

  3. error message (if any)

  
  

  Insert the product key on YLE reports Notebook back as invalid

  
    4. all changes made to the youer system until the problem occurred

  
  Partitioned and insbreak ISO image of it that had real control online

  
  

  5. unfortunately I got no recovery disk.

  I had saved a log of my previous report of my laptop in MY USB STICK:

  
  

  Kindly help out me

  PARAMESWARAN Iyer
  

  The ID of the product corresponds to the key for product activation. That's why it failed. The original operating system was an OEM version.

  I suggest either to buy HP recovery media or a HP partner for the route more inexpensive to solve this.

• I have a laptop Toshiba Satellite L305-S5894 with Windows Vista Home Premium installed (32 bit). Unable to get a backup to a flash drive. Error: 0 x 81000029

  Original title: I have a laptop Toshiba Satellite L305-S5894 with Windows Vista Home Premium installed (32 bit).  Unable to get a backup to a flash drive.

  After back back, very many updates of windows, my computer is full of problems and it is not representative of the restore points far enough back to correct.  I want really to save my data and programs for flash drive (s) and then go for a full recovery of the system (return to factory).  When you try to do the backup on a 4 GB USB key I get an error including 0 x 81000029.  I have seen posted answers to this.  Everything is included to aid Vista disk from the window which was not included when I bought my computer. Any help would be appreciated.

  Hello

  The following article should be useful. To use system recovery options, you have Vista installation disc. OEM (Original Equipment Manufacturer) repeatedly will install on the computer Windows recovery environment. To cross check if it is installed, try the following steps.

  1 start the computer and press the F8 key continuously to get advanced boot menu options.
  2. on the menu advanced startup options, check if the Startup Repair tool is in the list.
  3. If so, select it and press ENTER.
  4. If not, then you should organize a Vista installation disc.

  You may receive error messages when you try to perform a backup operation on a Windows Vista-based computer
  http://support.Microsoft.com/kb/950167

• Can I make backup and system restore, my PC has Windows Vista Home Premium installed.

  I have Windows Vista Home premium installed, but it won't back up my files and I can't use the system & restore for some reason any.

  Hello

  make backups on an external hard drive or DVD

  see if this information helps you

  How to make a backup of your data (all Vista versions)

  http://www.vista4beginners.com/how-to-backup-your-data

  How to restore your files

  http://www.vista4beginners.com/how-to-restore-files

  If you have problems with the repost of process above in forum microsoft link that is specific to the backup below questions

  http://social.technet.Microsoft.com/forums/en-us/WindowsBackup/threads

  _______________________________________________________________________________

  There are a variety of reasons for system restore problems

  Norton and Norton product Tamper Protection is the main

  Read about it:

  http://us.Norton.com/support/kb/web_view.jsp?wv_type=public_web&docURL=20101101224849EN&LN=en_US

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  You can try restoring the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  and malware can interfere with the restoration of the system

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• Large (100 gig +) file transfer fails in Windows 7 Home Premium 64-bit

  Hello

  I ran out of sensible troubleshooting options and am hoping that someone on the forum may be able to provide a solution or additional troubleshooting ideas.

  Scenario: I created a 178 concert file, an image of my old laptop XP file to be used for a virtual machine, on an external drive of USB3 for import to my new Windows 7 Home Premium 64 bit computer laptop (ASUS N61JQ i7, 4Gig of DDR3 RAM). Operation failed for copy of file on the Win 7 machine (current patches, drive D:, NTFS, 250 free concerts), without error messages, regardless of the method.

  Troubleshooting:

  Removes the file structure - exemplary fine for XP SP3 on a different machine, a smaller version (image of the C: drive only) copies very well to new laptop Win7 and creates the virtual machine that works.

  Eliminated the USB drive - used 2 different drives

  Eliminated from the USB - used Ports all three USB 2 and 3 ports and all failed, tried mapping to machine XP and do a drag and drop and copy and paste and even set up a ftp server on the Win 7 and tried machine download failed him via gigE and 802.11nall.

  More advice in this forum and others, I downloaded Teracopy who do not - this failed with a message indicating that "the operation failed due to a file system limitation", but wikipedia shows the limit of file of an order of magnitude larger than my 16 TB file.

  I also tried PowerShell coming to stop the copy without error message (resource monitor showed no activity on the external drive - the source of the file).

  I also have:

  • tried disabling / uninstalling antivirus
  • run the copy in safe mode
  • I tried to find answers in the newspaper of the events without success.

  All seemed to fail somewhere after 100 gig mark. Often (but not always) failures caused strange behavior, including being unable to , unable to task switch, unable to stop. Often (but not always) a power switch reboot was necessary. My suspicion is that the copy of file is using some pool of memory that is needed by other processes of basic and cause misfortune wide system.

  Interestingly, a new file by concatenating a line of 50 concerts three times for 150 gig in the same location as the destination file, a new file in target in the same place creating worked!

  After having exhausted the limits of my personal creativity I now submit this problem to the collective wisdom of the tribe. A big thank you in advance, Richard.

  Success!

  I tried another file copy utility FastCopy http://ipmsg.org/tools/fastcopy.html.en, he also failed, but with a slightly different error message:

  "The requested operation was not successful due to a file system limitation665"

  Search on Google that the message has led to this article:

  http://social.technet.Microsoft.com/forums/en-us/winserverfiles/thread/e0d55018-CF06-43ca-8e20-dd2bb8494c96

  ... his fundamental premise - de-Frag - did not help (drive was off fragmented already), but the link internally to:

  http://TechNet.Microsoft.com/en-us/library/cc781134%28WS.10%29.aspx

  which is a NTFS bible made me think on the compression of files and directories and of course the compression in this directory was put on, I never use the disk compression so I don't know how it's happened, but once set to 'off', the flow of the copy more than doubled and the copy proceeded until the end!

  Things that Microsoft might want to address:

  • I don't see anything in the literature suggesting there is a limitation to the compression of files. Fixing it, or the weakness of advertising would be a good thing
  • None of the built-in tools advised of an error or managed properly, one would think that NTFS has been mature enough so that it would no longer be a problem.

  Sort of, it's fixed now:

  Solution: COMPRESSION SET OFF

  Best regards and happy new year

  Richard

  

• Lost my backup of windows 7 Home premium CD and also formatted my hard drive full

  Hello

  I have Pavilion DV6 7012tx which was delivered with genuine windows 7 Home premium. Once I tried to install Ubuntu Linux and ended with windows 7 crashed. I lost my cd of windows backup 7 and that I needed my laptop upwards and runs it immediately so I formatted my complete hard drive and created new left and installed windows xp. Now I want my to my windows 7 back. Please help me how can I getgenuine windows 7 back?

  Hello

  You can order a set of replacement recovery disks using the link below.

  Order HP recovery disks.

  If you have a problem with this link, order them directly from HP.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  Kind regards

  DP - K

• Upgrade Windows 7 Home Premium to Windows 10 has failed

  I tried 4 times to upgrade to Windows 7 Home Premium from Windows 10 and every occasion it failed with the error message "WindowsUpdate_C1900107" "WindowsUpdate_dt000"

  Can you please help / advise me what to do to solve this problem. I'm not very irritable

  I suggest you to download the tool for creating Windows Media 10 ISO and make a place in upgrade.

  Download the update of Windows Media Player 10 tool creation build Version 10586, 1511:
  http://www.Microsoft.com/en-us/software-download/Windows10

  How to download an ISO using media tool:
  http://www.tenforums.com/tutorials/9230-Windows-10-ISO-download.html

  How to perform an upgrade InPlace using method 1:
  http://www.tenforums.com/tutorials/16397-repair-install-Windows-10-place-upgrade.html#step6

• A backup copy of programs of productivity on a windows 7 Home premium 64-bit PC back to a new windows 7 Professional 64 bit PC?

  My task: I backed up all productivity software to a windows 7 home premium 64 - bit PC (which is currently retired) on an external hard drive. I want to use several of these programs on a new PC running windows 7 Professional 64 bit OS. I think I may have several ways to accomplish this task and seeks your advice on the following techniques.

  1. I could remove the hard drive from the old PC and use it as a second hard drive in the new PC. If I do that I must leave the operating system on the drive?

  2. can I just restore my backup to the new PC?

  3. even though I have the original program CD, license restrictions limit the number of times, some programs can be installed and activated. I have addressed the issues of licensining to several software manufacturers of my software, including shade (by PaperPort, Omnipage, etc.) and am waiting for answers.

  4. I also consider the creation of a system dual boot, but I believe that the windows 7 Home Edition premium OS should be the default OS. This change would probably cancel my warranty with HP.

  5 Please, don't limit your answers to the above ideas. I would appreciate your help or suggestions on the best way (if any) to accomplish my task.  Thank you.

  Programs don't return because there is more than one program that just running the main folder.

  When a program installs it puts the files in the Windows system folders. If these files are not present in the active operating system, they most likely will not work. Much depends on how dependent of the program is on files in system folders.

  If you have the original CD for the programs in question, re - install. Relative to the license, as long as the programs are installed and running on a single computer ONLY, there should be no problem at all...

  When you program discs, there is no point in dual-boot. Don't make life more difficult for yourself...

• I tried twice to install the KB2754670 update every time install failed with the error code 646 can help? I have Windows Vista Home Premium edition

  Update Windows cannot install KB2754670 twice showed error code 646. Can someone help? I am running Windows Vista Home Premium edition.

  Gives it a try and see if it solves the problem....

  http://support.Microsoft.com/kb/2258121>

  UTC/GMT is 01:26 Sunday, October 21, 2012

• Activation failed - Windows 7 Home Premium to Pro upgrade

  Bought a copy of Win 7 Pro Upgrade - DLMWin7Pro64US.exe.  This issue of the key to upgrade to the premium that came with the PC.  Does not allow to launch and install the file.  She accepted the product key and completed the installation, if Win 7 Pro.  Activation does not accept the same number of keys that I used to upgrade.  What is the solution?

  TNX

  I strongly suggest you try the following, once more and clearly explain your situation to call the agent. Simply tell them: you use a key to upgrade Windows 7 professional retail to upgrade your edition of Windows 7 Home Premium to Windows 7 Professional existing and you just want to turn it back on.

  Click Start, right click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

• Windows Vista Home Premium SP1 - multiple windows program or service failures after Windows Update June 17, 2011

  I have Windows Vista Home Premium SP1 (I think that SP1 anyway). Last night June 17, 2011, update of Windows installed an update or updates. Now, Windows Explorer, Internet Explorer, Windows Installer, Windows Sidebar, Panel, Windows Update and other Microsoft programs all fail. I get messages with various error codes. A message is 'class not registered '. I tried a restore to a previous restore point, but apparently the only restore point is the one made after the update. What can I do here? I know that I can always restore the factory image (Dell), but I'd rather not if I can help it.

  Hi doc,

  Method 1:

  You can try to repair aStartup if it is included in the system recovery options provided by the manufacturer of the computer or start from the disc for Installation of Windows Vista.

  Startup Repair: frequently asked questions

  What are the system recovery options in Windows Vista?

  Method 2:

  Alternatively, you can try to start a disk check and check.

  You can view the following link to perform a disk check:

  Check your hard drive for errors

  Note: When you run the disk check, there are chances of losing data if you can take a backup of important data before you run checkdisk.

  Hope this information is useful.

• I have problems keeping records and files of the administrator and the user separate in my laptop (HP Pavilion dv6700) under Windows Vista Home Premium.

  I have problems separating records and files of the administrator and the user. My computer is a laptop (HP Pavilion dv6700), used as a home computer only by myself, I like to keep the two distinct roles, but am unable to as Vista seems to be considered as one and the same. This scenario has arisen as follows:

  Initially, when I bought the laptop - approx. 18 months back - Windows Vista Home Premium was preinstalled, with the name 'Administrator' as an administrator. To customize the operating system and to use safely, I installed a user 'Renault', as a Standard account user.

  After awhile, I changed the name of the Director of "Renault", for reasons I have can not remember now. This caused Vista to combine folders and files of the two "users" in one, I found difficult to deal with, that I could not operate my laptop as just a Standard user, but is still considered the "administrator." On the one hand, this greatly increased spam in my email accounts. So I tried to reset the name of the administrator as 'Administrator' itself and keep my user name as "Renault", as originally the case.  But Vista me has failed to create a new user under the name "Administrator". So I created a new user under the name "System administrator", with administrative privileges. This has been accepted by Vista.

  But I forgot to change the user account for 'Renault', on the Standard account, so there was BOTH administrator accounts at the same time on my laptop! I realized that now only. The net result was that all the files that I created under the system administrator user were still being displayed under the user account of Renault. A few days back, I realized this and tried to separate the files correctly, but it has not been possible. No matter what I copied the account of the user in the files under the system administrator account, the files have been copied on account of the user himself.

  I tried to fix this by changing the name of the user account in something very different, AND as a Standard user. but this also does not work, as all folders and files under the administrator account system shows it as being under the user account of "Renault" only!

  Then, I deleted the user 'Renault' from the list of the user, but he was not yet of any help. Whenever I tried to create a new file under the system administrator, Vista responds with the message, "C:\user\Rajaram folder is not present. Will I create a new? ", which defeat the same purpose of my tent to isolate the administrator account and the user account.
  
  SOMEONE HELP ME PLEASE WITH A SOLUTION, - OTHER THAN REFORMATTING MY C:\ DISK AND REINSTALL VISTA AGAIN - TO GET OUT OF THIS MESS, IT SEEMS TO ME YOU HAVE CREATED AND HELP ME TO HAVE AN ADMINISTRATOR ACCOUNT AND OTHER UNIQUE STANDARD USER ACCOUNTS PROPERLY ISOLATED.

  I would be always grateful for a quick and helpful response.
  Thanks in advance.

  -RAJARAM77
   
  Thanks for your reply. It was very helpful / sorry your proposed solution has not solved my problem. Kind regards. -Rajaram77

  Better to delete the user account except the one that was built in the administrator account that you renamed. Before this backup all your data files of these user accounts.
  Then rename the buil into account administrator as 'administrator '. Then you create another administrator account and use it and never the user built in Administrator account and leave it alone.