Windows 7 'home screen hang up. "

Similar Questions

• Windows 7 Home Premium hangs on updated 25 June 1, 2010

  Hi I have a PC HP PavilonElite HPE-210Y new I bought on Friday, it is installed with Windows 7 Home Premium.    Friday we put in place, made overall upward and downloaded all the updates without problem. On Saturday, we have installed Adobe CS3, DropBox, Microsoft Security Essentials and Microsoft office 2007 (all legitimate copies).      It worked well through this morning, but at about 07:30 the computer says that it had updates installed (29 to be exact). I clicked on ok and went about my business, but it has since been blocked to update 25 for the last 2 hours, but no progress.   Light on the computer that blinks when the HD is committed has not lit at this time and I'm stuck on the screen that tells you not power off or unplug the machine installation 25 of 29...  I had not changed my power management settings, but after some research, it's seems that there are a few known issues with the processor to wake up for mode 'sleep', no chance that this is part of the problem?   other thoughts of what I can do to fix this?    Thank you

  AD

  Hi a drum.

  First, restart the computer and check if resumes normally and continues.

  Otherwise, start your computer in safe mode, and then perform the system restore .

  After restoring the system, wait until you get notification of updates of Windows on the system tray, close all applications before accepting the updates of Windows. Check what is happening.

  Windows have to restart Windows updates take effect. Check if it still hangs at the 25^th update.

  FOR INFO:

  http://Windows.Microsoft.com/en-us/Windows7/updates-frequently-asked-questions

  Also, before you configure Windows updates, go to Power Options and set it to never sleep.

  Check the updates that have failed in the history of the update.

  1. open Windows Update by clicking the Start button. In the search box, type Update, and then in the list of results, click Windows Update.

  2. in the left pane, click view update history.

  3. to view more information about an update, double-click it.

  You can also look at the position of Dale Qiao from the link below.

  http://social.technet.Microsoft.com/forums/en/w7itproinstall/thread/8c3715b6-aa4e-44ff-b709-5a6c5a779825

  Let us know the status of the issue.

  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• 11-no10dx Pavilion: Pavilion model 11-no10dx to Windows 10 home screen flickers so bad can't do anything.

  Was running 8.1 Windows 64 bit on Pavilion 11-n010dx. Graphics driver intel is version 10.18.10.3366. After the upgrade to Windows 10 graphics driver has been 10.18.10.4252. The upgrade was successful, but after connect you and get the home screen, the display flashes severely and permanently and is unusable. After hours of trying I finally was able to get into safe mode and back to Windows 8. 1. now the Intel graphics driver is version 10.18.10.3366 and everything seems to be back to normal. What is the problem and how can I get this machine up to 10 Windows. Is it a driver Intel graphics, problem, or something else. The internet is FULL of people having this problem, but it does not seem to be displayed of all the solutions that I can find. Also, how is the screening of 10 Windows did not find any problems and said the machine was able to be upgraded to Windows 10.

  Nevermind I fixed myself. After return to Windows 8.1, I went into the the Task Manager and disabled the option to boot to Norton. Then I Redid the upgrade to Windows 10. Update went fine everything as before and after connection and the home screen came power was fine. I started with Norton and did an update and he succeeded. Then, I went in the Manager of tasks and active start Norton and rebooted. The system has rebooted and everything works fine.

• I Tunes flashing on windows 10 home screen

  The House because I tunes music flashes while I browse the contents of the screen. I have a new laptop and using windows 10.

  Other screens when checking an album etc are ok. Never had a problem on windows 7 or 8

  Any ideas?

  It is the result of a build error in the latest version of iTunes (12.3.2.35).  Apple sneaking an update a few days ago (unfortunately and confusingly also marked "12.3.2.35") which corrects the problem... just re - download the installation program revised and run it to update installation on your PC.

• Questions of knock on the Windows in Windows 7 home screen via RDP connecting to network.

  When I try to connect to my PC to work through RDP, I start typing my domain name that is the USA. When I type the U, I get a 5. If I hit the U-6. then 7. It's to welcome on my work PC screen. All other screens that the keyboard works fine. Win7 at work and home. Was no problem working under XP.

  Hello

  For assistance on this issue, you can ask your question here:

  (Services Terminal Server) remote desktop services

  http://social.technet.Microsoft.com/forums/en-us/winserverTS/threads

• Upgrade to Windows 7 Home Premium - Message 'unknown error 10 '.

  I understand that this has been asked before, but unfortunately many answers are much too technical for me.  I'm a computer user, not a computer expert.

  I received the error message following twice today on my PC Windows 7 Home Premium 64 bit slot.

  

  I have successfully upgraded to Windows 7 on my laptop with no problems.  He was also relatively fast - today, two attempts with the PC took more than four hours before the update is completed and returned me to the Windows 7 home screen.

  The most obvious solution would be to uninstall Windows Live Essentials, as the health check said that this app does not work in Windows 10.  I did not on the laptop, but maybe try it tomorrow.

  Anyone could explain the error code if you please, knowing that I'm not the type of computer terminology that was offered as solutions on other items of this type.

  I look forward to your responses.

  Difficulty manually updates windows

  (1) start > Search > services > run as administrator
  (2) stop services > Windows Update and in the Background Intelligent Transfer Service
  (3) start > Search >C:\Windows\SoftwareDistribution\DataStore

  Click to access the DataStore folder too and remove Newspapers & DataStore.edb
  (back 4) services and deliver on both services mentioned in step 1)
  (5) run the windows updates (Note: in windows 7, the windows updates are always slow)

  Automatically reset the Windows Update components
  https://support.Microsoft.com/en-us/KB/971058

  on installing windows 10

  In my opinion, is much faster to download ISO Windows 10 files

  and create a bootable USB key with him... !!

  and it is good to have

  in case you need to re - install windows 10 or install windows 10 to another computer

  Installation Windows 10 using the media creation tool

  http://Windows.Microsoft.com/en-us/Windows-10/media-creation-tool-install

  If you need to install or reinstall Windows 10.
  You can use the media creation tool

  to create your own installation media by using either a USB flash drive or DVD key.

  How to create a bootable USB key bootable media
  https://www.Microsoft.com/en-us/software-download/FAQ

• Blue screen when you try to install Windows XP Home Edition on Satellite L350D-11 has

  Hello
  When I try to install Windows XP Home (including SP3) on my new L350D-11 has a blue screen after loading the drivers.
  When booting with Kubuntu Live CD (8.x) appears an error message: / sbin/modprobe out anomalous.

  At least I need Windows XP because of some programs that do not work under Vista. Is it possible to install XP?

  Hello

  Hmm I think the BSOD appears because you didn t add SATA drivers in the Win XP operating system.

  However, you can try to install Win XP on your laptop without the use of the SATA driver, but you can change the SATA AHCI in the BIOS in compatible mode.

  Check it out!

• Crysis stuck on black screen on Windows 7 Home Premium 64-bit

  OK, for starters, I had Crysis installed on my system before but had to reinstall Windows and now nothing does, not even Fallout 3 GOTY Edition on my system, I have more then qualify for a game but I am still having problems.
  --------------------------------------------------------------------------------
  * After clicking on Crysis.exe it will appear to load then remains in black screen "forever" until I hit a key on the keyboard or manually close with the Manager tasks.
  --------------------------------------------------------------------------------

  * The things ive done to solve these problems listed below:

  1 patch 1.2 and 1.2 to 1.2.1 (no effect)

  2. put up-to-date video/audio drivers 'Again' (no effect)

  3 update Direct X (no effect)

  4. Uninstall and reinstall, and then try to run the game (no effect)

  5. application of hotfixes again after reinstall (no effect)

  6 restart the system periodically just in case (no effect)

  7. check the contradictory programs (found nothing)

  8 ALT + ENTER on eternal black screen (no effect)

  9 running the game in compatibility mode for XP (no effect)

  10. run the game in compatibility mode for Vista (no effect)

  11 run the game as administrator (no effect)

  12. in the process of running 32-bit and 64-bit variants (no effect)

  13. Windows in a State of clean boot (no effect)
  --------------------------------------------------------------------------------------------
  In the rare cases where it was working switching settings or load anything on the menu crashed the game

  If someone reads this and has all the solutions/advice please leave a message, my computer plug below.

  ----------------------------------------------------
  64-bit Windows 7 Home Premium
  AMD Athlon X 2 250 Regor 3.2 Ghz
  4 GB DDR3 1333 MHz
  ASUS NVidia Geforce GTS240 1 GB
  WD Blue 500 GB HDD
  Orion 575W PSU
  ASUS M4A785TD - V EVO 'motherboard '.
  ASUS 24 "VH242 1080I ~ 1080 p Max Res: 1920 x 1080
  HP DVD1270 24 X multiformat DVD writer

  Here is a link that will help you further:

  http://www.faultwire.com/solutions-exception_core/fatal-0xc0000005-* 1064.html
  One of the problems causing my crashes Crysis DX10 was a bad stick of RAM. I had to test each stick individually with MEMTEST86.
  http://www.memtest.org/
  The first time all the sticks passed but after continuing crashes, I retested and found a bad stick. Another thing I noticed was that many accidents have occurred when my clumsy fingers were depressing too many keys at the same time. Crysis has a lot of problems even with the newest and the best material of today but still lots of fun when it works.
  http://www.MyCrysis.com/welcome

• KB2296011 causes the blank screen in Windows Vista Home Premium?

  I'm troubleshooting an issue with an installation of Windows Vista Home Premium on a laptop. After Tuesday October 12 updates, the laptop goes to a blue screen after authentication with any account. There is a mobile cursor mouse, but nothing else. C/a. gives the menu, but "Start Task Manager" has no effect, restart will only work.

  I am able to login normally mode without failure. Remove the update KB2296011 removes the problem, I narrowed down it to only this update. It is now necessary to restart and use system restore to go back before this particular update to access Windows.

  I did the following to troubleshoot:

  (1) I tried to install the system update tool, which had no effect.

  (2) I tried to install the KB2296011 update manually after downloading, the problem returns after installing.

  (3) I tried to install the KB2296011 update manually mode without failure by another post here, but this is not possible, which gives the following error: "Windows Update Standalone Installer: Installer encountered an error: 0x8007043c.»  This service cannot be started in Mode safe. »

  It seems up to present have no way to obtain this update to install without the origin of the white screen issue. Please advice, thank you.

  OK, it looks like at this will be my last post.

  This technician seems to address the issue much differently from the rest. After the things we have done in my previous post, he seems convinced that the problem occurs when this security update is installed, it thinks it's UAC which is damaged, and possibly other files. If its resolution suggested the problem is to run a repair on Vista installation, in order to repair potentially damaged or corrupted files. This would correspond well with hijackware theory posted earlier, too.

  It seems door by another symptom not reported to me or noticed until now. With or without UAC enabled, standard users cannot connect. It passes the connection, in the preparation of your office for a disconnection. Administrative users can connect very well. As the primary user of the machine is an administrator (of course!), this was not noticed until I created a Standard user to test and found this problem.

  I hope than a repair installation (or even better, an upgrade, as I prefer to simply wipe the HD and start over) will solve the problem. The machine has 2 GB of RAM and a 2 GHz dual core chip, so I think it can handle very well (my wife does mobile) Win7.

  I hope that all of this novel, we have written here will help others as well.

• Window remains white screen after starting windows screen. the system hangs after Mup.sys on safe mode

  The title pretty much everything said.

  The problem occurred on a fault that Dell Vostro 2510 with the additional option should only do the downgrade of Win Xp (from Vista).  As noted, on normal startup, the system will remain in a blank screen after the Windows Xp "loading" screen.  And on safe mode, it will join Mup.sys and then hang there.

  The closest thing that I got from a web search was a thread in forum saying that the official info from Microsoft was that it was a question of Win Xp/motherboard (http://www.hardwareanalysis.com/content/topic/31874/?o=40 halfway to a post by Bobb Fwed).  The poster provided no link, so I don't know how official his info was really.

  Thank you
  -joe

  Contact the Dell Support under conditions of your warranty or Service contract. I suspect that you look at a clean install of Windows here. Good luck! ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Black screen problem and I have a real Windows XP Home Edition. Help, please!

  I have a genuine Windows XP Home Edition came with my Dell computer. After downloading the critical updates a few weeks ago, I now get the black screen and the message window saying that I may be victim of a counterfeit and that my system may be at risk. What can I do to clear up this problem? Thank you.

  Please visit http://www.microsoft.com/genuine/ and click on the button to validate Windows or validate Office, and then restart your computer.

  If you were not able to validate, follow these steps:

  1. Download this diagnostic tool, save it to your desktop: http://go.microsoft.com/fwlink/?linkid=56062

  -Online Windows XP: double-click the executable file to run the tool.

  -Online Vista & Win7: right-click on the executable and select run as administrator to run the tool.

  2. after running the tool, click on the Windows or Office as appropriate and then click on copy to the Clipboard.

  NB: You can open a new file in Notepad, paste the contents of the Clipboard in it & keep for future reference.

  3 start a new post in the appropriate forum of Microsoft Genuine Advantage and paste the results of the WGA or OGA data diagnostic in a detailed post: http://social.microsoft.com/Forums/en-US/category/genuine

  4 Troubleshooting specialist will analyze the data and recommend an appropriate solution.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I upgraded my card mother cpu ram and hard drive. I reinstalled windows xp home edition has got all of the updates. After 9 latest updates download and installtion went well, I restarted the computer, I get a blue screen and the computer restarts

  I upgraded my card mother cpu ram and hard drive. I reinstalled windows xp home edition has got all of the updates. After 9 latest updates download and installtion was going well until I rebooted the computer and go to page window showing all the icons that I get a blue screen and the computer restarts its self and does not stop. How can this be corrected?

  Hi KevinRy,

  Welcome to the Microsoft Answers site!

  Unplug all external devices.

  Try to start in safe mode. If you can start in safe mode, and then do a system restore to restore the computer to an earlier point in time.

  Change the recovery settings to disable automatic reboot, if you are able to boot up to the desktop computer:

  1.	Right-click my computerand then click Properties.
  2.	Click the Advanced tab.
  3.	Under Startup and recovery, click settings to open the Startup and recovery dialog box.
  4.	Clear the automatically restart check box, and then click OK many times necessary.
  5.	Restart your computer so that the settings take effect.

  Now, when you are going to close and a fatal error occurs, you will see at least and it won't cause an automatic restart.

  Please reply back with the error message you get because it helps us to resolve the error.

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• If I buy and install Windows 7 Home premium is automatically change my laptop a touchscreen screen or do I need to get a screen special hardwear?

  If I buy and install Windows 7 Home premium is automatically change my laptop a touchscreen screen or do I need to get a screen special hardwear?

  monitor you need to buy a touch screen, win7 it turn not into one!

• HP Mini210-1041NR hangs on the Windows Xp loading screen

  my HP Mini210-1041NR hangs on the Windows Xp loading screen, the laod reached late bar, then he stops and restarts, can someone hlp me difficulty this please

  Hello:

  Please read this guide and read the news on the chipset intel.

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and/SATA-drivers-for-XP-solution-on-0x0000007B-BSOD/TD-p/114120

  Tip: Your model has the NM10 chipset.

  Paul

• OverDrive media console software hangs when opening it. program does not message. Windows xp home

  After the installation of the overdrive media console software, whenever I try to open the console it freezes and I get a program not responding do not message. I have to restart the computer to clear the screen. I am running windows xp home edition. I tried deleating and reinstall the software overdrive media console several times with the same result.  Thanks Pat

  The clean boot fixed the problem!  Thank you.