Windows 7 Installation invites for DVD/CD driver

Similar Questions

• Equium L10 needs a driver for DVD - RAM drive

  It's rather embarrassing, but these days, I found that somehow, the driver for my DVD RAM (Mat * un UJ830s) is somehow damaged or missing.

  I searched high and low on the net to find the right driver to reinstall, but I can't find a single thing.

  Do not can someone help?

  Do you mean simply common driver for the carpet * a UJ830s?
  Windows generally use the common Microsoft OS driver and usually you will not find a Toshiba driver for this device.
  OK, on the page you will find a DVD - RAM but it s only for reading and writing to DVD-RAM media.

  Attention if you use DVD-RAM disks in the drive of DVD MULTI data cannot be written to a DVD-RAM disk, while the function to write data on discs CD-R/RW standard Windows XP is enabled.
  A message is displayed when this function has been enabled, so when using a DVD-RAM disk, take into account the teaching given in this message by unchecking "enable CD writing on this drive.

• Windows will not see my DVD/CD drive

  I have Windows Xp Professional SP3. Windows will not see my DVD +-RW which is internal drive, or my double-sided external DVD RW lightscribe. I tried the FixIt tool and the registry hack. They can work at the same time, but whenever I try to use the car, they both disappear again. Anyone have any new ideas?

  Hello

  ·        Since when are you facing this problem?

  ·        Remember to make changes to the system?

  ·        What registry hack you speak and what patch did you use?

  Method 1:

  I suggest you try the steps mentioned in the articles below and let us know your progress.

  Drive CD - R or CD - RW Drive is not recognized as a recordable device

  http://support.Microsoft.com/kb/316529

  Advanced Troubleshooting for issues that occur when you are installing a new CD or DVD drive in Windows XP

  http://support.Microsoft.com/kb/314096

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  Method 2:

  I suggest to update the firmware of the CD/DVD drive on the system and check if the problem persists.

  Method 3:

  In addition, run the fix that is present in the link mentioned below.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• How to change the Windows settings to allow for the camera driver must be installed

  My laptop doesn't recognize my digital camera. The correct software is responsible for the camera. An error message indicates that Windows will not allow access to the driver. How can I change the settings in Windows so that the driver for the camera is recognized?

  Help please!

  Hi Brian,.

  1. are you able to install all device drivers?
  2. which antivirus program is installed on your computer?
  3. don't you make changes to the computer before the show?

  The question seems to be as a program is blocked.
  I suggest you perform the clean boot and check if the problem persists. Clean boot helps eliminate conflicts of software that occur when you install a program or an update or when you run a program in Windows. You can also troubleshoot or determine what conflict is causing the problem by performing a clean boot.

  How to perform a clean boot in Windows
  http://support.Microsoft.com/kb/929135

  Note: Follow How to reset the computer to start as usual after a clean boot troubleshooting article KB929135 to reset the computer in normal mode.

  I hope this helps.

• OPTIARC AD7560A - D803.exe firmware and CRC/installation for DvD RW drive

  
  
  

• Windows 7: A cd to dvd device driver I'm missing?

  Excuse me..

  I have problem with win7, the problem is that after the victory to Flash successfully make my bootable flashdisk, then I plug the flashdisk on my 110-3500 HpMini, but after starting Setup win7, a box pops - up and theres something written there that "a required cd/dvd drive device is missing... blah blah..." Is there something wrong with my HpMini? I tried to cancel the program installation and then re insert it to another usb port, but it did not work... Please help me sir... Sorry for my bad English...

  The wireless switch is on the front on the right side in the opposite of the power switch position.

  Windows Dvd installers are much more likely to become corrupt than ISO files or installers of USB. They are not indestructible and are best kept in a DVD box for safekeping.  All it takes is a simple scratch on the label of the DVD side and toast.

  Disc info you provided are identified as a Western Digital Scorpio Black SATA2 320 GB hard drive. What is the product number and the name of the product of your mini?

  Best regards
  ERICO

• When I'm able to take my windows 7 installation from the dvd media when I do the installation?

  I want to install windows 7 and I was wondering if I can take the dvd from the drive after the installation. Or should I keep it there to set up the hardware and install the video drivers?

  I want to install windows 7 and I was wondering if I can take the dvd from the drive after the installation. Or should I keep it there to set up the hardware and install the video drivers?

  Know not why you need to release the DVD (unless you are installing on multiple computers and you need the DVD as soon as possible - which case I suggest you get some 4 GB USB sticks and making the installation media bootable off of them for speed and flexibility in this situation - but once the files are copied and extracted - you can remove the DVD.
   
  If you ask because you are caugfht in a boot loop - just change your BIOS settings so it starts on the second CD/DVD drive and the hard drive first and then determine what needs to specify the bootable media to power on the key combination (for example, Dell is F12) and the press who After turning on the machine until you get the selection menu and choose the DVD of the first hour and then ignore it from there on.

• Windows 7 installation on the new hard drive failure

  Install Windows 7 on a new hard drive. The new HDD is 750 GB Sata 3 GB 7 200 RPM.

  Windows 7 will not finish installing.

  Commissioning of repair using windows in the drive disk cannot complete until the end of Windows 7 install.

  I had installed Advanced. Creates a new 30 GB partition. Windows will create a 100 MB partition. I installed Windows 7 on the 30 GB partition. It will go the whole process until the completion step. It restarts, the blue screen appears. Where, it is said,

  (Attempt to Reset display driver and recover from Timeout failed.)

  If market, it will start to the top and do the samething.

  Before that my old hard drive went bad, I did a Windows 7 upgrade and updated all the drivers. Everything worked very well.

  Now, this is a full installation of Windows on the hard disk again.

  Here is the computer info I had saved.

  HP Pavilion a6250z PC
  -Genuine Windows Vista Home Premium (32 bit)
  -AMD Athlon (TM) 64 X 2 5600 + dual core - 2.8 GHz
  -3 GB DDR2 - 667 MHz dual channel SDRAM (2 x 1024, 2 x 512 MB)
  -512 MB NVIDIA GeForce 8500GT, DVI - I, TV, HDMI out
  -802.11 b/g USB Wireless LAN card & USB external modem
  -HDD 400 GB 7200 RPM SATA 3 Gb/s
  -LightScribe 16 X MAX drive DVD +/-R/RW SuperMulti
  -16 x Max DVD-ROM
  card reader memory 15 - in-1, 1394, 3 USB, audio
  -Tuner TV ATSC-NTSC with PVR, FM tuner, remote control
  -7.1 audio channels w/front audio ports integrated

  What I am doing wrong?

  Thank you for helping me

  I solved my problem.

  I replaced the NVIDIA card and did a fresh install and everything works fine.

  Just a ton of updates and it will be like new.

• instrucyions for windows custom installation 10 for firefox

  There was an email from Firefox who asked the upgrade of Windows 10 custom installation.

  I need to know what are the steps. I have not yet installed.

  Hello

  Once you have updated for Windows 10 and Firefox installed, you will find this article useful to set Firefox as default browser.

  I hope this helps, but if not, please come back here and we can look at another solution for you.

• AutoPlay does not work for DVD - RW drive

  Original title: Media Player

  When I go to my computer-drive DVD - RW (D) - properties - auto play prompt me each time to choose an action-apply-OK; It dose does not work when I insert a disk in my computer; WHY? Help, please!

  Hello

  ·         What exactly is the problem? Do you want to say AutoPlay does not work?

  ·         What happens when you try to insert the CD/DVD in the CD/DVD drive?

  ·         You are able to open the CD/DVD directly from the my computer window?

  I suggest you follow the steps mentioned in the articles below.

  The AutoPlay function does not work and the current media does not appear in my computer when you insert a CD or DVD

  http://support.Microsoft.com/kb/817357

  The Autorun feature or the AutoPlay feature does not work when you insert a CD-ROM into the CD drive

  http://support.Microsoft.com/kb/330135

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.

• INSTALLATION OF A DVD DL DRIVE.

  I use windodw ver 7 in 64 bit. I installed alite on Corp. blu ray double layer read dvd blue ray player wirtable. the computer sees it as a cd single layor / dvd player. How can I get reconise it as a dl drive on the computer?

  Just a web search for «free of Blu - ray burning» software

  I bought Nero and it DVD DL and would Blu-Rays, if I have a drive.

• HP Envy Phoenix 860se-100: required power for DVD cable drive on Envy Phoenix 860

  I recently bought a Phoenix of envy and the first task was to cut the power of 500w and replace it with a bigger 80 more platinum supply (EVGA Supernova 750w P2). I have a 980ti video card and added a few SSDs that require the increased power.

  While it is installed and works well, the Endowment had a [what I have now learned to know as] sata mini connector for power to the DVD player. Naturally my new power supply do not have that.

  Best I can tell is to get something like this: http://www.amazon.com/gp/product/B009JXKQ9O?keywords=mini%20sata%20adapter & qid = 1458574748 & ref_ = sr_1 _... (although I have will probably want it a little longer)

  This should allow me to connect the sata and power from the motherboard. So my question is that correct?

  Or something like that might work also, http://www.amazon.com/Syba-Cable-Molex-Adapter-CL-CAB40042/dp/B005BCNAWM/ref=sr_1_1?ie=UTF8 & qid = 1458...

  I guess that this connects to my diet?

  I bought a cable mini sata (6 pins) on ebay for a few dollars. Solved the problem. Subsequently my brother mentioned that the electricity company probably would send me a free.
  
  500 watts was barely sufficient to manage the graphics card processor and 980ti. I don't want a bill of $600 to replace my card because the power supply has failed. Not to mention that it is more than 10% more efficient.
  
  Thanks for the reply.

• Windows Automated Installation Kit for Windows 7 works with Windows XP SP3?

  Windows AIK for windows 7 works with windows xp sp3... the docs said windows XP sp2

  Hello

  Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Windows Server deployment. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en-us/w7itproinstall/threads

• Can I transfer my Windows XP installation on a larger hard drive?

  original title: upgrade

  my friend has win xp and needs to upgrade service pack however its main drive is less than 3 GB and there is not enough space to upgrade a second 80 GB drive is available xp can be transfared to the largest disk if so how thanks

  Visit the web site of the manufacturer of the new hard drive and search for a free hard disk cloning program.  For example, if your new hard drive will be done by Western Digital, you can use their free Acronis True Image WD Edition Software.

• Get the Installation failed (-10) for Wireless LAN Driver on Samsung laptop running Windows 7 computer

  I tried to install the update of the driver wireless LAN appears so in SW updates on my Samsung laptop model number NP305E5A that is running Windows 7 (64-bit); and I keep getting error message-10 Installation failure.  I called Samsung and they distance access my computer and tried to install it via the SW update, as well as through websites; and it's the same thing; and they said I need to contact Microsoft as there seems to be some sort of bug on the side of the things Microsoft... Or otherwise I have to do a factory reset my laptop (which I will lose everything I have on my computer - not my first choice of solving this problem)

  The biggest problem with this is that it has disabled the wireless all together, and EVERY time I turn on my computer I have to go into my settings and activate my wireless, and no matter what I do the settings will not stay and I lose connectivity wireless at times.

  Please tell us what to do.

  Download the driver manually for the wireless adapter. (see instructions below)

  Restart in Mode safe mode and uninstall the driver via Device Manager.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Click Start, type: Device Manager

  Press enter on your keyboard

  Expand the network adapters

  Right-click in the map listed wireless, this must be a wireless network Broadcom based card

  Click on uninstall.

  Restart your computer in normal mode.

  Download driver driver for Wireless adapt.

  Go to http://www.samsung.com/us/support/owners/product/NP305E5A-A01US

  Scroll down to the driver tab, and then select your operating system and architecture:

  http://Windows.Microsoft.com/en-us/Windows7/find-out-32-or-64-bit

  

  After you have selected your architecture, scroll to the bottom of the page and you will see your driver listed:

  

  Scroll to the right click on the button to download the Zip

  

  Once downloaded, extract the zip file and then double-click the installer to begin the installation.

  Compress and decompress files ( filezip ) - Windows help

  Tips for fixing common driver problems - Windows help

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly